Manuale d’uso / di manutenzione del prodotto DP-6000 del fabbricante Panasonic
Vai alla pagina of 80
Digital Imaging System DP-6000/7000 Options DA-FS700/MA700/XT700/TR700 Operating Instructions (For Copier) Before operating this machine, please read these instructions completely and keep these operating instructions for future reference.
TRADEMARKS/COPYRIGHTS The following trademarks and registered trademarks are used throughout this manual. Microsoft, MS-DOS, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
i Preface Thank you for choosing Panasonic DP-6000/7000 Series. This manual aims to provide all the information necessary for effectively operating the copier together with notes on safety precautions and maintenance tips. T o get the most out of your copier , please read the manual carefully and completely before using the machine.
ii FCC This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
iii DP-6000/7000 Series Useful Features Making Sorted Sets Y ou can select to output the copies as collated sets. 4-7 Collating Copy Output (Output/Finishing) Copying Mixed Size Originals Mixed size documents can be copied simultaneously without having to specify the size of each original.
iv Inserting Blank Sheets Between Copied T ransparencies Y ou can insert blank sheets as separators between the copied transparencies. Copies for distribution can also be made simultaneously .
v Creating a Negative-type Image Y ou can create a negative-type image on a copy by reversing the black and white areas of the original. 5-14 Creating Negative-like Images (Negative Image) Repeating an Image Y ou can copy an image and repeat it on a paper .
vi Storing Jobs in Memory Y ou can store the jobs which you frequently perform into memory . 5-21 Job Memory Operation s Stapling/Punching Holes in Copies (optional) Y ou can staple and output the copies. Alternatively , you can punch holes in the copies.
vii Using These Operating Instructions This manual consists of the following chapters. Chapter 1 Getting to Know Y our Copier This chapter contains operating instructions about your copier like information on the major components, the methods of switching the power On and Off and how to use the touch panel display .
viii Chapter 7 T roubleshooting This chapter describes the actions to be taken in the event of errors or machine faults. Read this chapter for instructions on how to resolve these errors if they occurred.
ix Conventions The manual uses the following conventions..
x W arnings alert you to potential hazard that could result in serious injury or death. Cautions alert you to operations that may result in minor injury or damage to the machine. This symbol is used to alert operators to a specific operating procedure that requires close attention.
xi and 85% at 95°F or below . Sudden temperature fluctuations can affect copy quality . Rapid heating of a cold room can cause condensation inside the machine, directly interfering with image transfer . Do not expose the machine to direct sunlight. Exposure to direct sunlight can adversely affect the machine’s performance.
xii Be sure to switch Off and unplug the machine before accessing the interior of the machine for cleaning, maintenance, or fault clearance. Access to a live machine's interior can cause electric shocks. When the machine is not used over an extended period of time, switch it Off and unplug it.
xiii Other Precautions When installed at a certain location, the machine may cause interference with radio and television reception. If you notice flickering or distorted images or noises on your audio-visual units, your machine may be causing radio interference.
xiv If pulled out with too much force, the tray can hit and injure your knees. When pushing back the T ray , be careful so that your fingers are not hurt by the pincers. When opening the T ransfer Unit, be careful so that your fingers are not hurt by the pincers.
xv - Handling Instructions - Used Drum Cartridges and T oner Cartridges should be properly disposed of. Contact your local authorized Panasonic service representative for disposal. Administer emergency treatment as follows: If toner gets into your eyes, rinse them well with plenty of clean water .
xvi The Objective of the International Energy Star Program As a member of the International E NERGY S TA R ® Program, Panasonic confirms that this product satisfies the requirements for International E NERGY S TA R ® Program standards.
xvii T able of Contents Preface Useful Features Using These Operating Instructions Conventions Safety Notes The Objective of the International Energy Star Program Chapter 1 Getting to Know Y our Copier 1-1 Main Components and Their Functions .........
xviii Chapter 3 Loading Documents 3-1 Documents .............................................................................................................................. 34 Loading Documents in the DADF ...........................................
xix 5-12 Selecting the Original Size (Original Size) ............................................................................ 106 5-13 Enhancing Sharpness (Sharpness) ................................................................................
xx 7-3 Document Jams .................................................................................................................... 183 Document Jam at the Feeding Point of the DADF .................................................... 183 Document Jam Inside the DADF .
1-1 Main Components and Their Functions ........................ 2 1-2 Switching On and Off .................................................... 6 1-3 Using the T ouch Panel Display ..................................... 8 1-4 Entering Password (When the Auditron Feature is Enabled) .
2 1 1-1 Main Components and Their Functions Getting to Know Y our Copier Main Components and Their Functions Main Components Automatically feeds a stack of documents, one sheet at a time, for scanning. For copying a two-sided document, side one is scanned first and the document is flipped in the DADF for side two to be scanned.
3 1 1-1 Main Components and Their Functions Getting to Know Y our Copier * Indicates that the feature may not be available on certain models. 17 18 19 20 21 12 Finisher (optional) Enables stapling and hole-punching. 16 15 14 13 Fixes the printed image on the paper by fusing the toner .
4 1 1-1 Main Components and Their Functions Getting to Know Y our Copier Control Panel 1 2 1 3 4 5 6 2 Brightness Adjustment Dial T ouch Panel Display Settings/Meter Check Button Password Button Interrupt Button/Indicator Power Saver (On/Off) Button Adjusts the brightness of the T ouch Panel display .
5 1 1-1 Main Components and Their Functions Getting to Know Y our Copier 7 Start Button Press this button to start copying or scanning. The Auto indicator light at the upper left lights up when Auto Start is activated. 9 Clear All Button Press this button to clear all settings and return to the default screen.
6 1 1-2 Switching On and Off If the breaker trips repeatedly , contact your local authorized Panasonic service representative. Check the Ground Fault Interrupter once a month to ensure that it works correctly. Power requirements and ground connection of Safety Notes for an explanation on the Ground Fault Interrupter .
7 1 1-2 Switching On and Off Getting to Know Y our Copier 1 If the machine is switched On but has been left unused for a fixed period of time, the Power Saver feature will reduce the power consumption of the machine to conserve energy . See 1-5: Saving Power for details.
1-3 Using the T ouch Panel Display 8 1 Getting to Know Y our Copier Using the T ouch Panel Display The features shown on the display (includes message in the message area or the screen) will depend on the installed options and the model of the machine.
1-3 Using the T ouch Panel Display 9 Getting to Know Y our Copier 1 The System Administrator can use the T ools Mode to select the screens to be displayed. See sections on Feature Defaults and Screen Layout in 6-1: List of Custom Preset Functions for details.
1-3 Using the T ouch Panel Display 10 1 Getting to Know Y our Copier Selecting a Feature T ouch a displayed button to select a feature or value. See “Chapters 4 to 6” for details.
1-3 Using the T ouch Panel Display 11 Getting to Know Y our Copier 1 When there are Scroll Buttons Functions of the Reset, Cancel and Close/Save Buttons Returns all the selected features and values to their original settings when the screen was first displayed.
1-3 Using the T ouch Panel Display 12 1 Getting to Know Y our Copier Message Pop-up and Confirmation Pop-up Screens A message pop-up screen will be displayed to show warning or caution notes. Select Close to exit from this screen. A confirmation pop-up screen will be displayed when an action requires your confirmation.
13 1 1-4 Entering Password (When the Auditron Feature is Enabled) Entering Password (When the Auditron Feature is Enabled) Chapter 9 Using the Auditron Feature for details on the functions and settings of the Auditron feature.
14 1 Getting to Know Y our Copier 1-4 Entering Password (When the Auditron Feature is Enabled) If you made a mistake while entering the password, press the Clear C button to clear and re-enter. Y ou can change the maximum display time (time-out) of the default screen by using the Auditron Administration Mode.
15 1 1-5 Saving Power The machine has a power-saving feature, which lowers the power consumption when copying is stopped for a period of time. This consists of two modes based on the level of power consumption.
16 1 Getting to Know Y our Copier 1-5 Saving Power Y ou can enable the Low Power Mode manually when you are not making copies for a period of time. Procedure Press Power Saver (On/Off) . The power saver light is turned On and the machine is in the Power Saver Mode.
2-1 What Paper to Use ..................................................... 18 2-2 Storing and Handling Paper ........................................ 20 2-3 Loading Paper ............................................................ 21 2-4 Changing the Paper T ray Size .
2-1 What Paper to Use 18 Loading Paper 2 This section describes the paper stock that can be used on this machine. The T ray 6 (High Capacity Feeder) is optional.
2-1 What Paper to Use 19 Loading Paper 2 The special media mentioned on the right cannot be used for 2-Sided copying. Do not use paper with glue or tape on it. Special Media cannot be loaded in Trays 1 and 6 (High Capacity Feeder) (optional). Load perforated paper with the holes toward the back of the tray .
2-2 Storing and Handling Paper 20 Loading Paper 2 Storing and Handling Paper Observe the following when storing paper: • Always store paper in a cabinet or at a place with low humidity . Damp paper may cause jams or affect the image quality . • Always re-pack unused paper , preferably with desiccant.
2-3 Loading Paper 21 2 Loading Paper During a copy job, paper can be added to a tray not selected for the current job that is in progress. Loading Paper The following screen will appear when paper runs out during a copy job. Add paper according to the displayed instructions.
2-3 Loading Paper 22 2 Loading Paper Push the tray in slowly until it stops. The message, "Ready to copy . Press Start to continue or press C button to cancel the job.
2-3 Loading Paper 23 2 Loading Paper Load paper with the side to be copied facing up and inserting them till they touch the back of the tray . Make sure the edges of paper towards you are aligned. Move the Paper Guide to touch the paper . T ray 5 (Bypass) under Paper Supply of the Basic Features screen becomes selectable.
2-3 Loading Paper 24 2 Loading Paper Loading Paper in T ray 6 (High Capacity Feeder) (optional) T ray 6 (High Capacity Feeder) is optional. The capacity of T ray 6 (High Capacity Feeder) (optional) is 3600 sheets. Do not load paper above the MAX fill line.
2-4 Changing the Paper T ray Size 25 2 Follow the procedures shown below to change the size of T ray 1 in order to load paper stock of the desired size. For changing paper size A5 5.5 x 8.5", you have to do it via the T ools Mode screen. Procedure Pull Tray 1 out until it stops.
2-4 Changing the Paper T ray Size 26 Loading Paper 2 Place paper stock of the desired size against the bottom-right corner of the tray . Pinch and hold the release on the Lever again and push the Lever forward until it touches the edge of the paper . Paste the new Paper Size Label on the front of the tray .
2-4 Changing the Paper T ray Size 27 Loading Paper 2 Changing the Size of T rays 2 to 4 Request assistance from your System Administrator if you need to change the size of T rays 2 to 4. Y our System Administrator can follow the procedures shown below to make the changes.
2-4 Changing the Paper T ray Size 28 Loading Paper 2 Place paper stock of the desired size against the bottom-right corner of the tray. Adjust the Paper Guides according to the size of the paper. Remove the paper from the tray and use a screwdriver to fasten the screws as shown in the diagram.
2-4 Changing the Paper T ray Size 29 Loading Paper 2 Press Settings/Meter Check on the control panel. Select T ools Mode . Enter the Access Number of the System Administrator by using the keypad and select Confirm . Each input digit is represented by an asterisk.
2-4 Changing the Paper T ray Size 30 Loading Paper 2 Select the tray that you have changed by using the buttons. Then select Change Settings . For example, select T ray 3 . Select the desired preset paper size. If the preset paper size is measured in inches, select Inch Size .
2-4 Changing the Paper T ray Size 31 Loading Paper 2 T ray 6 (High Capacity Feeder) is optional. This section explains the procedures for changing the paper sizes to be loaded in Tray 6 (High Capacity Feeder). Paper sizes that can be loaded are B5 , A4 , and 8.
2-4 Changing the Paper T ray Size 32 Loading Paper 2 When the paper size is changed to B5 , remove the Horizontal Guide from the right side of the tray. Insert the Horizontal Guide into the (B5) slot and fasten the screw. Place the paper against the bottom-right corner of the tray.
3-1 Documents .................................................................. 34 3-2 Loading Documents .............................................
3-1 Documents 34 Loading Documents 3 Documents Place document on the Document Glass or load it in the Duplex Automatic Document Feeder (DADF). Place the following types of documents on the Document Glass.
3-1 Documents 35 Loading Documents 3 The largest document size that can be placed on the Document Glass is shown below . There is no limit on the smallest size. When using the Document Glass, the paper sizes, which can be automatically detected by the machine are A6, B6, B6 , A5, A5 , 5.
3-2 Loading Documents 36 Loading Documents 3 Loading Documents Load the documents in the DADF or place it on the Document Glass. The DADF lets you load a stack of documents for feeding to the scanner one sheet at a time, and output them after scanning.
3-2 Loading Documents 37 Loading Documents 3 Procedure Open the document cover . Place the document face down and align it with the upper-left corner of the Document Glass. Close the document cover . When copying a thick document, do not use excessive force to press it against the Document Glass.
3-2 Loading Documents 38 Loading Documents 3 The message "Size Mismatch" may be displayed if you have pressed the Start button after placing your document on the Document Glass and selecting the copy function. Size here refers to the image size that is calculated based on the document size detected by the machine and the specified ratio.
4-1 Overview of Basic Features ........................................ 40 4-2 Selecting a Paper T ray (Paper Supply) ...................... 42 4-3 Reducing/Enlarging (Reduce/Enlarge) ....................... 43 4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) .
4-1 Overview of Basic Features 40 Basic Features 4 The screen below has the T ray 6 (High Capacity Feeder), and Finisher installed. Overview of Basic Features The icons and buttons on the display that are used for carrying out a basic copy job are shown in the diagram below .
4-1 Overview of Basic Features 41 Basic Features 4 Keypad For entering numerical values such as number of sets Clear All For clearing and returning the selected settings to their default values Stop F.
4-2 Selecting a Paper T ray (Paper Supply) 42 Basic Features 4 Before starting a copy job, select a paper tray with the required paper size. There are two methods of selecting a paper tray: Auto Paper.
4-3 Reducing/Enlarging (Reduce/Enlarge) 43 Basic Features 4 Reducing/Enlarging (Reduce/Enlarge) The Reduce/Enlarge feature allows you to adjust the size of your copy image. There are two methods to choose from: Size-for-Size Copying ( 100% ) The copied image is the same size as the original image.
4-3 Reducing/Enlarging (Reduce/Enlarge) 44 Basic Features 4 Size-for-Size Copying Y ou can make an exact copy of the original by selecting 100% in Reduce/ Enlarge on the Basic Features screen. Procedure Load the document. On the Basic Features screen, select 100% in Reduce/Enlarge.
4-3 Reducing/Enlarging (Reduce/Enlarge) 45 Basic Features 4 If you have selected Auto % in Reduce/Enlarge, the machine determines an appropriate reduction or enlargement ratio so that the copy image fits onto the paper from the tray which you have selected in Paper Supply .
4-3 Reducing/Enlarging (Reduce/Enlarge) 46 Basic Features 4 Select Cancel to cancel the settings. Procedure Load the document. On the Basic Features screen, select Reduce/Enlarge . Select the button with the desired preset ratio. For example, select 64% 1 1 x 17" 8.
4-3 Reducing/Enlarging (Reduce/Enlarge) 47 Basic Features 4 Paper Supply can also be selected on the Features Menu screen. The screen on the right has the T ray 6 (High Capacity Feeder), and Finisher installed. V ariable Percentage Change (V ariable %) Y ou can make copies by selecting a ratio between 25-400%.
4-3 Reducing/Enlarging (Reduce/Enlarge) 48 Basic Features 4 Use buttons, or the keypad displayed on the screen to enter the ratio. For example, enter 120%. Select Save twice. Select other features if necessary. Enter the required number of sets by using the keypad and press Start .
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) 49 Basic Features 4 Reducing/Enlarging the Length and W idth (Independent X-Y%) The Independent X-Y% feature allows you to make copies with independent length or width of the original. There are three methods available.
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) 50 Basic Features 4 Y ou can make copies of your original by specifying its X and Y ratios separately . The image will be copied according to the ratios that you have entered. Procedure On the Basic Features screen, select Reduce/Enlarge .
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) 51 Basic Features 4 Y ou can use buttons below XY on the display to increase or decrease the ratio of X and Y simultaneously . Select Cancel to cancel the settings. Some features cannot be selected together with this feature.
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) 52 Basic Features 4 Select Cancel to cancel the settings. The machine will automatically adjust the ratio to 25% if the calculated ratio is 25% or below , and 400% if the calculated ratio is 400% and above.
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) 53 Basic Features 4 Use the ruler markings surrounding the Document Glass to set the area of the original for scanning. Select Cancel to cancel the settings. T o change the value, select Enter/ Next to move to the value you want.
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) 54 Basic Features 4 The factory default for Reduce/ Enlarge is 100% . Reduce/Enlarge can also be selected on the Features Menu screen. Paper Supply can also be selected on the Features Menu screen.
4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) 55 Basic Features 4 T o disable Image Rotation, set it to Off on the Customized Features screen or Features Menu screen. Some features cannot be selected together with this feature. See Appendix B: Possible Combinations of Features for details.
4-5 Copying on One Side (2 Sided) 56 Basic Features 4 Copying on One Side (2 Sided) The 2 Sided feature allows you to make one sided copies from one sided documents or two sided documents, T o make one sided copies from a two sided document, use the DADF .
4-5 Copying on One Side (2 Sided) 57 Basic Features 4 Select either 1 1 Sided or 2 1 Sided . For example, select 2 1 Sided. Select Head to Head or Head to T oe as the image orientation of the document if you have selected 2 1 Sided . Head to Head When all sides of a document have the same orientation.
4-5 Copying on One Side (2 Sided) 58 Basic Features 4 Some features cannot be selected together with this feature. See Appendix B: Possible Combinations of Features for details. 5-10: Selecting the Original Orientation (Original Orientation) for details.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Panasonic DP-6000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Panasonic DP-6000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Panasonic DP-6000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Panasonic DP-6000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Panasonic DP-6000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Panasonic DP-6000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Panasonic DP-6000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Panasonic DP-6000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
