Manuale d’uso / di manutenzione del prodotto AW-HB505 del fabbricante Panasonic
Vai alla pagina of 28
Multiport Hub A W -HB505 Before attempting to connect or operate this product, please read these instructions completely. .
Warning: This equipment generates and uses radio frequency ener - gy and if not installed and used properly, i.e., in strict accordance with the instruction manual, may cause harmful interference to radio communications.
-1- CONTENTS FEATURES .................................................................................................................................................................................. 2 PRECAUTIONS ....................................
-2- FEA TURES • The Multiport Hub AW-HB505 is combined with the Multi-Hybrid Control Panel (AW-RP505) to control up to five Pan/tilt Heads (AW-PH300) and Color Video Cameras (AW-E560).
-3- • Use only with AC Adaptor, Model AW-PS505. • Handle the control panel with care. Dropping the control panel or subjecting it to a strong shock can cause a failure or an accident.
-4- MAJOR OPERA TING CONTROLS AND THEIR FUNCTIONS POWER 1 YC 2 YC 3 YC 4 YC 5 YC OFF ON CABLE COMP Multl Port Hub A W-H8505 ■ FRONT P ANEL q Power Indicator [POWER] Lights red when Power ON/OFF Switch w is in the ON position, and goes out when the same switch is set to the OFF position.
-5- e Cable Compensation Luminance Control [CABLE COMP Y] Used to adjust the Y (luminance) signal level of video output signals as appropriate to the length of the cable between the pan/tilt head and the Multiport Hub.
-6- CAMERA CONTROL OUT CAMERA CONTROL IN VIDEO OUT PAM/TIL T CONTROL OUT PAM/TIL T CONTROL IN S-VIDEO OUT VIDEO IN G/L OUT G/L IN CAMERA CONTROL OUT VIDEO OUT PAM/TIL T CONTROL OUT S-VIDEO OUT VIDEO I.
-7- o Camera Control Input Connector [TO CONTROL PANEL, CAMERA CONTROL IN] Connect it to Camera Control Input Connector [CAM- ERA CONTROL OUT] on the multi hybrid control panel with a coaxial straight cable (5C-2V or equivalent), which may be extended up to 10 meters.
-8- • Install the pan/tilt head after carefully reading the Operating Instructions for Pan/tilt Head. • Have four hex bolts (M6 x 4) ready for mounting the pan/title head. Select bolts of a length appropriate to the material and structure of the mounting base and the overall weight applied to it.
-9- • Changing Switch Settings on Pan/tilt Head q Remove the cover from the pan/tilt head. * Be careful of the Tally Indicator wire. w Shift the mounting direction switches (SW1, SW2) on the pan/tilt head depending on whether the head is suspended from the ceiling or mounted on the floor.
-10- ON OFF • Shifting Cable Compensation Switch on Pan/tilt Head If the distance from the control panel to the pan/tilt head is longer than 300 meters, set the cable compen- sation switch to the ON position by observing the fol- lowing procedure. q Remove the controller connection panel from the pan/tilt head.
-11- CONNECTION • Before making any connection, switch off all the com- ponents of the system. • Use the Control Panel AC Adaptor AW-PS301 (optional) and Pan/tilt Head AC Adaptor AW-PS300 (optional). • Use the Pan/tilt Head AW-PH300 and the Color Video Camera WV-E550 or AW-E560.
-12- ITEM (AWC) UP (ABC) PAGE DOWN (BAR) IRIS G/L IN VIDEO OUT ZOOM/FOCUS REMOTE VD VIDEO/RGB VBS/HD 75 ON OFF CONTROL EXT DC IN SEE MANUAL CAUTION • Connect the iris control cable of the motor-driven zoom lens to the camera and the remote (zoom/focus control) cable to the pan/tilt head.
-13- CAMERA CONTROL OUT CAMERA CONTROL IN VIDEO OUT PAM/TILT CONTROL OUT PAM/TILT CONTROL IN S-VIDEO OUT VIDEO IN G/L OUT G/L IN CAMERA CONTROL OUT VIDEO OUT PAM/TILT CONTROL OUT S-VIDEO OUT VIDEO IN .
-14- S-VIDEO VIDEO PREVIEW VIDEO VIDEO CONTACT PAN/TILT CONTROL PAN/TILT CONTROL CAMERA CONTROL CAMERA CONTROL SYSTEM TALLY G/L G/L DC-15V OPTION SWITCH CONTROL PREVIEW VIDEO G/L ON POWER OFF POWER O I FUSE(POWER) 3.15A FUSE FUSE Option Unit SEG, Switcher etc.
MEMORY PRESET 2 13 4 5 6 789 1 0 -15- OPERA TION 1. Power Set the power switches on the pan/tilt head AC adapter and the multiport hub AC adapter to the ON position, then set Power control Switch on the multi control panel to the ON position.
-16- e Right Panning Limiter Turn the pan/tilt head to the desired right panning limit with PAN/TILT Lever of the multi hybrid control panel, keep MEMORY Switch depressed, and simultaneously press buttons [4] and [9] of PRESET Switch for 5 sec- onds or more.
-17- 2) Adjust the cable compensation, genlock, and total pedestal of the selected camera. • Cable Compensation Signal degradation due to cable length between the con- trol panel and the pan/tilt head can be compensated for.
-18- GRAY YELLOW CYAN GREEN MAGENTA RED BLUE 100 90 80 70 60 50 40 30 20 10 0 -10 -20 -30 -40 +69 +77 +56 +48 +38 +12 +7 -5 -16 -16 +15 +28 +36 +20 -20 +20 -20 +100+100 +89 +77 +72 +46 IRE 75% 100% 1V[p-p] +100 +27 +27 -20 -13 -13 100 90 80 70 60 50 40 30 20 10 0 -10 -20 -30 -40 IRE 75% 100% +20 -20 +20 -20 +7.
-19- e Set G/L PHASE ON/OFF Switch of the multi hybrid con- trol panel back to the OFF position. • Subcarrier Phase Adjustment q Set G/L PHASE ON/OFF Switch (15) of the multi hybrid control panel to the ON position.
-20- • T otal Pedestal Adjustment Total pedestal adjustment is made to adjust the pedestals of two or more cameras. Using an oscillo- scope or a waveform monitor, adjust the pedestals to 5 IRE (0.035 V) or 7.5 IRE (0.050 V) with T.PED Control of the multi hybrid control panel.
-21- w Pick up a white object (a white wall or white handker- chief, for example) fully on the screen. Be careful to keep a shiny or bright object out of the screen. e When AWC Switch of the multi hybrid control panel is pressed, the auto Auto set Indicator flashes and the white balance is automatically adjusted.
-22- 5. Camera and Pan/tilt Head Presetting 1) Select a camera and pan/tilt head with the CONTROL switch on the multi hybrid control panel. 2) Pick up a desired object with the camera using PAN/TILT Lever ZOOM Lever and FOCUS Lever of the multi hybrid control panel.
1 YC 2 YC 3 YC 4 YC 5 YC CABLE COMP 1 YC 2 YC 3 YC 4 YC 5 YC CABLE COMP 1 YC 2 YC 3 YC 4 YC 5 YC CABLE COMP -23- RACK MOUNTING To mount the multiport hub in a rack, use the supplied rack mounting brackets and screws (M4x10). q Press the power switch to turn power off.
-24- SPECIFICA TIONS Source Voltage 12 V DC (4-pin cannon connector) Power Consumption 12V, 2A Video Input 1.0 V[p-p] composite/75 Ω x 5 (BNC connector) Genlock Input 1.0 V[p-p] black burst/75 Ω (BNC connector) Camera Control Intput Control signal (BNC connector) Pan/tilt Control Intput Control signal (RJ-45 8P modular jack) Video Output 1.
-25- Operating temperature − 10°C to +45°C (14°F to +113°F) Dimensions 420 (W) x 88 (H) x 250 (D) mm [16-9/16" (W) x 3-7/16" (H) x9-13/16” (D)] Weight 4 kg (8.8 lbs.) Finish Cover: AV Ivory vinyl chloride steel Panel: AV Ivory painting Weight and dimensions indicated are approximate.
N1197-0 7J1A108A Printed in Japan Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 2E-6, Secaucus, NJ 07094 Regiona.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Panasonic AW-HB505 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Panasonic AW-HB505 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Panasonic AW-HB505 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Panasonic AW-HB505 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Panasonic AW-HB505, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Panasonic AW-HB505.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Panasonic AW-HB505. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Panasonic AW-HB505 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
