Manuale d’uso / di manutenzione del prodotto 81CM Cordless Remote LCD Television & Monitor del fabbricante Palsonic
Vai alla pagina of 35
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 81CM C.
T able of Contents Important Safety Precautions .................................................................................................................... Preparations .........................................................................
T able of Contents (continued) Setting Sound ............................................................................................................................................ Adjusting the Volume ............................................
Important Safety Precautions 1 Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
Important Safety Precautions (continued) 2 15. Stand --- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
Preparations 3 2 Using the Remote Control Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. Note: the illustration is for your reference only, the remote sensor may locate differently with different model.
Preparations (continued) 4 Antenna Connection INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Identification of Controls 5 Main Unit Power Indicator A yellow indicator lights when the power is on and a red indicator lights when in the standby mode. Remote Sensor 1. POWER Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY.
Identification of Controls (continued) 6 1. Antenna input Allows you to connect cable or outdoor antenna 2. Headphone jack 3. AV inputs (Video, Audio L/Mono, R) / S-Video input Receive video/audio signals from external sources such as VCR or DVD player.
Identification of Controls (continued) 7 1. POWER Turn the unit on or standby. 2. CH , VOL+/- CH - Use to switch channels; - To display previous/next page (Teletext) VOL+/- - Use to adjust volume; In MENU operation, use CH to select menu item and VOL+/- to adjust selected item.
Identifications of Controls (continued) 8 To activate picture-out-picture 17. PIP To activate picture-in-picture To select stereo, mono, bilingual To rectify the picture automatically in D-Sub mode To display hidden information such as solution to riddles and puzzles (Teletext) 16.
Connections 9 Connect a VCR 21-pin Scart Convertor VCR How to connect: 1. Insert the Scart Convertor into SCART1 or SCART 2 interface. 2. Connect the AV Cable between the Scart Convertor and the VCR. To play VCR 1. Turn on your LCD TV, press SOURCE button on the remote control.
Connections (continued) 10 Connect AVI or S-Video Inputs Yellow (VIDEO) White (AUDIO L/MONO) Red (AUDIO R) The unit provides Audio/Video inputs for you to connect external devices such as VCR, Video Camera or Home video game system. How to connect: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and external devices.
Connections (continued) 1 1 Rear of the DVD player How to connect a DVD Player or Home Cinema System using Component Video Connections: Connect the Video cable between the Y, Cb, Cr input jacks on the unit and Cb, Cr output jacks on the DVD player.
Connect a PC D-Sub IN AUDIO DVI-D IN HDTV IN Y Connections (continued) 12 How to connect: Connect the cable or antenna to the antenna input jack on the DTV receiver. Conned the DVI cable between the DVI input interface on the unit and DVI output interface on the DTV receiver.
T urning the Unit On and Off 13 MP: SECAM FM/AM ABC With the power on, Press the Power button on the remote control to turn off. Turning the Unit On and Off Turning On Insert the power cord into the wall outlet. Press the Power button on the remote control.
V iewing TV Programs 14 Your LCD TV can memorise and store all of the available channels. After the available channels are memorised, use CH to scan through the available stations. Select a Region Before you start automatic search, it is necessary to select a region firstly.
V iewing TV Programs (continued) 15 Manual Search Use Manual Search if desired channels can not be memorised or if you would like to store programs to specific channel numbers one by one. Use number buttons to directly select a channel that you want to perform manual search.
V iewing TV Programs (continued) 16 5 Setting Favourite Channel Press MENU to display the menu main page. Press VOL+/- repeatedly to display Program menu page. Press CH to select Program No item. Press VOL+/- to select a channel that you want to set as your favourite channel.
Locking TV Channels 17 Setting Locking Function On or Off Press MENU to display the menu main page. Locking or Unlocking TV Channels If the [Child Lock] item is set to [On], the unit asks you to input password if you want to access the [Program] menu page.
Basic Operation 18 TV ------------------ select TV signal. Video -------------- select signal from Video terminal. S-Video ----------- select signal from S-Video terminal. SCART1 ---------- select signal from 21-PIN SCART 1 interface. SCART2 AV ----- select signal from 21-PIN SCART 2 interface.
Setting Picture 19 Using the Preset Picture Mode Press ENTER to confirm and press MENU repeatedly to exit. There are three preset picture modes [Vivid, Standard and Mild] and one user-set picture mode [Custom]. Each preset mode has its own picture settings.
Setting Sound 20 Adjusting the Volume You may quickly adjust the volume by using VOL+ or VOL- . The unit also allows you to adjust volume through OSD menu as follows. Press MENU to display the menu main page. Press VOL+/- repeatedly to display Audio menu page.
Setting Sound (continued) 21 Stereo/Bilingual Selection You can quickly select sound multiplex mode by using the STEREO button on the remote control. NICAM Broadcast Selection This enables the selection of the reception mode when receiving a NICAM signal.
Setting System 22 Setting Colour System Press MENU to display the menu main page. Press VOL+/- to display Program menu page. Press CH repeatedly to select Colour System item. Press VOL+ or ENTER to access the sub-menu. Press CH to select a proper colour system.
With the unit working, press TIMER to display C urrent Time setting menu, which allows you to set Current Time. You may use VOL+/- to toggle hour or minute and CH to adjust. With the Current Time menu on the screen, press TIMER again to display Turn Off Time setting menu, which allows you To set Turn Off Time .
Changing Screen Layout 24 Selecting Screen Layout Press MENU to display the menu main page. Press VOL+/- repeatedly to display Option menu page. Press CH repeatedly to select MultiWin Mode item. Press VOL+ or ENTER to access the sub-menu. Press CH to select Off , POP , 6 Windows or 9 Windows .
PIP Operations 25 Viewing the Picture-in-Picture This unit includes a two-tuner Picture-in-Picture (PIP) feature. This allows you to watch two live broadcasts simultaneously, one in the full size "main" picture and one in a smaller "window" picture.
Adjustment in D-Sub/DVI Mode 26 With working in D-Sub or DVI mode, this unit allows you to perform many adjustments. Adjusting Image Horizontal Size Press MENU to display the menu main page. Press VOL+/- repeatedly to display Screen menu page. Press CH to select H Size item.
Adjustment in D-Sub/DVI Mode (Continued) 27 Smoothing the Picture Press CH to select Both on , Only Ver. on , Only Hor. on or Both off . Press ENTER to confirm and press MENU repeatedly to exit. Press MENU to display the menu main page. When the screen displays a picture with a bevel edge, you may find a sawtooth picture on the bevel edge.
T eletext 28 What Is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your System receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing.
T roubleshooting 29 Before calling for repair service, check the following items for possible remedies to an encountered symptom. Symptoms No power Check item "Ghost" or double images Check that the AC power cord is plugged into the mains socket.
Specifications 30 Maximum Colours Brightness Contrast Viewing Angle TV System Display Size diagonal Display Feature Channel Coverage LCD Panel Resolution Type Video In Audio In Other System PAL-D/K PA.
Specifications (continued) 31 1024 x 768 @ 75Hz, 70Hz, 60Hz 720 x 400 @ 70Hz 480P @ 60Hz 576P @ 50Hz 720P @ 50Hz, 60Hz 1080i @ 50Hz, 60Hz Supported Display Format: Optional accessories 1 User Manual 1.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-L32M5S3-03 Ver.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Palsonic 81CM Cordless Remote LCD Television & Monitor è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Palsonic 81CM Cordless Remote LCD Television & Monitor - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Palsonic 81CM Cordless Remote LCD Television & Monitor imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Palsonic 81CM Cordless Remote LCD Television & Monitor ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Palsonic 81CM Cordless Remote LCD Television & Monitor, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Palsonic 81CM Cordless Remote LCD Television & Monitor.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Palsonic 81CM Cordless Remote LCD Television & Monitor. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Palsonic 81CM Cordless Remote LCD Television & Monitor insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
