Manuale d’uso / di manutenzione del prodotto 76WSHD del fabbricante Palsonic
Vai alla pagina of 45
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 76CM W.
4. Switching on/off ................................................................................................. 5. Signal source selection ..................................................................................... Contents Congratulations on your purchase of Palsonic's HDTV ready.
12. Buttons' function ............................................................................................. 13. Signal source selection .................................................................................. 14. OSD introduction .
Avoid exposing the set to direct sunlight and other sources of heat to prevent damage to the cabinet and components. Do not expose the TV set to rain or excessive moisture. Avoid using the set in very warm or damp places and never use it in a bathroom.
When the TV set is to be left unattended for a long period of time, turn off the power supply and remove the plug from the wall outlet. If the power cord or the plug is damaged contact a qualified service department for service.
TV/AV CH- CH+ MENU VOL- VOL+ 1. TV/AV button: Open the signal source selection menu. 2. CH- button: Select a lower position number. 3. CH+ button: Select a higher position number. 4. MENU button: Enter into the menu. 5. VOL- button: Lower the volume 6.
2.3 Back View 1. Antenna input 2. DVD input terminals { VIDEO: Y, C B , C R , AUDIO: L/MONO, R} 3. AV1 input terminals { S-VIDEO, VIDEO, AUDIO: L/MONO, R} 4. AV2 input terminals { S-VIDEO, VIDEO, AUDIO: L/MONO, R} 5. AV output terminals {VIDEO, AUDIO: L/MONO, R} 6.
Button function: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. Power on/standby Scan mode selection To caption moving into 4 successive frozen frames STATIC/MOVING picture mode selection Still the current picture Channel preview Channel up/down In menu operation used to move the cursor upward or downward.
! 3.1 Antenna Connection ! 3. Installation To ensure a bright-coloured and clear picture use an outdoor antenna or CATV cable. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied).
FAQs 3.3 EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER 3.2 Battery installation Open the battery compartment cover. Replace the battery compartment cover. BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified.
3.4 External Equipment connections (Please refer to the owner's manual of the equipment to be connected as well.) 3.4.1 To connect AV input terminals You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound.
3.4.2 To connect DVD input terminals The figure below shows how to connect the DVD input terminals of the TV set to the DVD Player, Laser Disk Player, etc.
3.4.4 To connect XGA input interface The figure below shows how to connect the set to the computer through XGA interface. THE SET'S REAR COMPUTER White (audio L/MONO) Red (audio R) Press AV/TV button to display the signal source selection menu and select HDTV-XGA mode.
RF VIDEO1 VIDEO2 VIDEO3 YCbCr HDTV-XGA YPbPr 4. Switching on/off Press the main POWER SWITCH (1) the red power indicator lights up, the set is in standby mode. Press the POWER button (2) on the remote controller to turn on the set, and the power indicator turns to yellow.
Press CH button or MENU button Press CH button Enhanced 6. Brief menu operation and introduction Note: In menu operation, pressing MENU button or waiting for 15 seconds can exit the menu.
Press VOL button Press CH button Press CH button or MENU button TV Operation (RF mode) The PICTURE menu includes the following items: Contrast, Bright, Colour, Peaking ,Tint Matrix, CTI, COMB, DNR, SVM The SOUND menu includes the following items: Bass, Treble, Balance Surround sound, Loudness.
(2) (3) (1) 7. Channel Presetting If you have preset the channels, you can directly watch TV programs after turning on the set. If not, then preset channels in one of the following ways. Method 1: 1) 2) 3) 4) Press MENU button (1) to enter into the main menu.
7.2 Manual search Method 2: If auto tune can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel number, please make use of SEARCH . 1) 2) Use number buttons (4) or CH button (3) to select a channel number.
(2) (3) (3) (2) (4) (1) (2) (3) (3) (2) (4) (1) 7.4 Fine Tune 7.3 To skip unnecessary position numbers After presetting the channels, you can skip unnecessary position numbers so that only the channels you want to watch are selected with CH or CH button.
(2) (3) (3) (2) (4) (1) 7.6 The setting of colour and sound system 7.5 VCR 7.4.2 FINE TUNE Press the number buttons (4) or CH button (3) to select the channel you want to fine-tune.
4.5MHZ 5.5MHZ 6.0MHZ 6.5MHZ (2) (3) (3) (2) (4) (1) (2) (3) (3) (2) (4) (1) AUTO PAL SECAM PAL60 N443 NTSC 7.6.2 The setting of colour system Press the number buttons (4) or CH button (3) to select the channel you need to set the colour system.
(2) (1) (2) (1) 128 28 (1) Press -/-- button to display "---" on the top right screen. (1) Press -/-- button to display "--" on the top right screen. (2) Press 0-9 number buttons to select a channel. 8.1 Using the direct select buttons (0-9 & -/-- button) 8.
(3) (2) (1) 28 8.4 Using the PREVIEW button 8.3 Using the PREVIOUS channel button ( ) 8.2 Using the CH or CH buttons Press CH (1) to select higher position numbers; CH (2) to select lower ones. Press the button on the remote controller can swap the current viewed channel with the previous one.
(2) (3) (3) (2) (4) (1) 9.1 Picture adjustment 9. Picture and sound adjustments 9.1.1 Making use of PERSONAL button You can select the picture quality instantly among three preset modes and one user-set mode. Press the PERSONAL button (4) to select the desired picture quality.
STILL VOL VOL -50~+50 NORMAL/WARM/COLD ON/OFF ON/OFF OFF/LOW/HIGH/MILD OFF/LOW/HIGH ITEM CONTRAST BRIGHT COLOUR PEAKING *TINT MATRIX CTI *COMB DNR SVM PRESSING WEAKER DARKER PALER LOWER STRONGER LIGHTER DEEPER HIGHER 9.
P ANORAMA 9.1.7 Making use of PANORAMA button Press PANORAMA button to cycle through 16:9 Mode/PANORAMA/4:3 Mode /ZOOM/TITLE and select your desired screen aspect ratio. When you switch to other programs, the screen aspect ratio will restore to the default one.
9.2 Sound adjustment Press CH Press the MENU button (1) to enter into the main menu, press VOL or VOL button (2) to select SOUND menu. Press CH button (3) to cycle through the menu and select the desired adjusting item, press VOL button (2) to adjust.
9.2.4 Making use of LOUDNESS In SOUND menu select LOUDNESS , press VOL or VOL (2) to select LOUDNESS ON/OFF . When selecting LOUDNESS ON , you can let the ears enjoy enough bass and treble even if the volume is lower. 9.2.5 Volume adjustment and sound mute Press VOL or VOL (2) to adjust the volume.
10.2 ON timer 10.1 OFF timer 10. TIMER setting The TIMER setting you have made will restore to default value in about 6 seconds after you turn off the set. Press the MENU button (1) to display the main menu, press VOL or VOL (2) to select TIMER menu, press CH (3) to cycle through the menu and select the desired item.
10.3 ALARM timer 10.4 Program timer 10.5 Prog Number (2) (3) (1) (3) (2) This function allows the to alarm automatically at the preset time. The setting steps are as follows: Press CH or CH button (3).
(2) (3) (1) (3) (2) 11.3 Rotate function 11.2 AUTO-POWER-OFF function 11.1 OSD language selection 11. Making use of OPTION menu Press the MENU button (1) to display the main menu, press VOL or VOL button (2) to select OPTION menu. Press CH button (3) to cycle through the menu and select the desired item.
11.7 Blue screen setting 11.6 Degaussing 11.5 Picture moving (2) (3) (1) (3) (2) 11.4 Default screen aspect ratio setting Making use of this function can set the default screen aspect ratio.
Press CH , CH or VOL , VOL button to play the game. VOL , VOL button (2): move the cube leftward/rightward. CH button (3): accelerate the falling cube's speed. 11.8 Colour bar signal The colour bar signal is an alignment signal used by service personnel to check the set, and common user is suggested not to use it.
! (2) (3) (1) (3) (2) (4) VCR VOLUME REDUCE Colour system setting Menu operation in video mode You can connect video equipments such as a VCD, VTR to this TV and enjoy the program playbacked by the video equipment. Press the AV/TV button to display the signal source selection menu and then select video mode.
(2) (3) (1) (3) (2) (4) Menu operation in YCbCr mode You can connect the set to DVD or other equipment with YCbCr terminal. Press the AV/TV button (4) to display the signal source selection menu and then select YCbCr .
TEXT/IMAGE (4): It is used to cancel the OSD menu after OSD menu is activated. It is also used to switch between text mode and image mode (in either mode contrast and brightness are different).
13. Signal source selection If you previously watch programs in RF mode and now you want to watch HDTV programs, please first press the AV/TV button (4) call up the signal source selection menu, press the CH or CH button (3) to select HDTV-XGA or YPbPr, and press VOL or VOL button (2) to confirm your choice.
* * * * * 14. OSD menu introduction Press MENU button Press MENU button to enter into SCREEN ADJUST menu Screen Adjust Menu H-SIZE EXIT H-PHASE V-PHASE (SELECTED ITEM NAME) (ADJUSTMENT ITEM'S RAN.
6500K 9300K 14.1 Menu introduction CONTRAST BRIGHTNESS H-SIZE H-PHASE V-SIZE V-PHASE PI N-BALANCE PINCUSHION TRAPEZOID PARALLELOGRAM H-MOIRE V-MOIRE ROTATION RECALL ENGLISH/CHINESE Adjust the picture contrast. Adjust the picture brightness. Adjust the picture s horizontal size.
14.3 To switch between text mode and image mode 14.4 Volume adjustment 14.2 Contrast, Brightness adjustment 1) 2) 3) 4) 5) Press MENU button (1) to call up the OSD main menu. Press CH button (3) or CH button (3) to move the cursor upward or downward and select (Contrast) or (Brightness).
(2) (3) (1) (4) (3) (2) 14.6 Function menu item's selection 14.7 Audio adjustment 14.5 Screen adjustment The screen adjustment includes H-SIZE, H-PHASE, V-SIZE, V-PHASE, PIN-BALANCE, PINCUSHION, TRAPEZOID, PARALLELOGRAM. H-MOIRE, V-MOIRE, ROTATION, etc.
Item No. 31.25KHz/100Hz 31.25KHz/50Hz 31.25KHz/120Hz 31.25KHz/60Hz 28.125KHz/50Hz 33.75KHz/60Hz 45KHz/60Hz 31.5KHZ/60Hz 37.8KHz/75Hz 31.5KHZ/70Hz 37.88KHZ/60HZ 46.
TV cabinet creaks 16. Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. The screen has no content, the power indicator is not lit up. The screen has no content, the power indicator is red.
! The whole unit . TV . Min. 659 x 370 (unit: mm) 28KHz - 48KHz 6500 0 K/9300 0 K 30MHz VGA, S-VGA, VESA VGA, XGA 15-pin D-Sub type (Standard VGA cable) Display field Horizontal frequency Colour temperature RGB bandwidth Video adaptor card XGA cable 17.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-32.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Palsonic 76WSHD è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Palsonic 76WSHD - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Palsonic 76WSHD imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Palsonic 76WSHD ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Palsonic 76WSHD, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Palsonic 76WSHD.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Palsonic 76WSHD. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Palsonic 76WSHD insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
