Manuale d’uso / di manutenzione del prodotto CompactFlash 10/100 del fabbricante Palm
Vai alla pagina of 18
M73-APO01-440 CompactFlash Size Ethernet LAN Card For Both Notebook PC and Windows CE-based PDA/ Palm PCs/Pocket PCs Quick Installation Guide.
FCC REGULATORY STATEMENTS Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. This device must accept any interface received, including interface that may cause undesired operation.
- 1 - INTRODUCTION This CompactFlash Size Ethernet LAN Card is designed for Windows CE-based palm -sized PCs, handheld PCs and any computer wi th a CompactFlash slot. Plus, with connecting to a PCMCIA Adapter (not included), this CompactFlash Ethernet LAN Card turns into a PC card th at plugs into any computer with a PCMCIA slot.
- 2 - PCMCIA release 2.1 compliant Card Services and Socket Services OPERATING ENVIORNMENTS For Windows CE-based PDA/Palm PC: Software Compatibility Windows CE 2.0 or newer version For Notebook PC: Novell Netware 3.x/4.x Microsoft LAN Manager Packet Driver Applications Microsoft Windows for Workgroups 3.
Parts Names Compa ctF lash Size Ether net LAN card with Direct Port Link LED In dicat or RJ-45 port ACT L ED I ndicato r - 3 -.
HARDWARE INSTALLATION It’s referred to “the Compact Card” for the CompactFlash Ethernet LAN Card. Inserting the CompactFlash Ethernet LAN Card 1. Insert the CompactFlash Size Ethernet LAN Card into Windows CE-based PDA/Pal m PC by ali gning the Com pact Card with wide connector toward the CompactFlash slot.
CompactFlash Ethernet LAN Card is then turning into a conventional PCM CIA type II PC Card. 2. Align the PC Card toward the PC Card slot with brand label facing upward, as shown below.
- 6 - SOFTWARE INSTALLATION FOR WINDOWS CE 2.0/2.11/3.0 This section describes ho w to install the “CompactFlash Ethernet LAN Card” on a Palm- sized PC, handheld PC based on Windows CE Version 2.x or later, or on a Pocket PC based on Windows CE 3.
- 7 - LAN Card ” installed and appearing in the WinCE screen. 8. If your local LAN doesn’t run DHCP, you may have to manul ly configure the IP address under “Specific an IP address” option.
SOFTWARE INSTALLATION FOR NOTEBOOK PC (ONLY FOR USERS WHO A LSO PURCHASED THIS OPTION) Window s 98 Installation Make sure that the driver s of PC Card slot are well installed. The System Icon in the Status Area can report on its functionality. 1. Once the PC Card is connected to your computer, Windows will automatically detect the new device.
4. Click Next to continue. Windows will start to copy the appropriate driver to your system. If Windows asks you to supply your original Windows 98 instal lation CD- ROM, load it in the CD-ROM driv e. 5. For the first time installation, please click Network icon in Control Panel to add Protocols, Client and Service if you needed.
2 Windows will copy the appropriate driver to your system . If Windows ME asks you to supply your original Windows ME installation CD-ROM, load it in the CD- ROM drive.
- 11 - already installed in the NT 4.0 system. 2. Insert the Ethernet Adapter into one of the system's PCMCIA Slots 3. Power up Windows NT 4.0 4. Open My Computer 5. Open Control Panel 6. Run the Network 7. Select Adapters page 8. Press Add to add network adapter 9.
2. Select Search for a suitable driver for my device (recommended) . Click Next. 3. Select Floppy disk drives and insert the disk associated with the PCMCIA Ethernet card in the disk driv e.
4. Click Next to make Windows install t he appropriate driver for the new device. 5. Click Yes to continue. - 13 -.
6. Click Finish to complete the software installation. Window s XP Installation 1 Once the device is connected, Windows will automatically detect the new device. Insert the device Driver Disk into the floppy disk drive of your system . Click Install the software automatically (Recommended) and click N ext.
2. Click Continue Anyway to proceed. 3. Wait while Windows copies the appropriate driver to your system . 4 Click Finish to complete the software installation.
- 16 -.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Palm CompactFlash 10/100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Palm CompactFlash 10/100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Palm CompactFlash 10/100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Palm CompactFlash 10/100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Palm CompactFlash 10/100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Palm CompactFlash 10/100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Palm CompactFlash 10/100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Palm CompactFlash 10/100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
