Manuale d’uso / di manutenzione del prodotto HD25LV del fabbricante Optoma Technology
Vai alla pagina of 69
1 English T able of Contents ............................ 1 Usage Notice ................................... 2 Safety Information ...............................2 Precautions .........................................3 Eye Safety Warnings .............
2 English Usage Notice The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous volt- age” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.
3 English Usage Notice Please follow all warnings, precautions and mainte- nance as recommended in this user ’s guide. When the lamp reaches the end of its life, the pro- jector will not turn back on until the lamp module has been replaced. T o replace the lamp, follow the proce - dures listed under “Replacing the Lamp” section.
4 English Usage Notice Do: T urn off and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display hous - ing. Disconnect the power plug from AC outlet if the product is not be - ing used for a long period of time.
5 English Usage Notice tions, those who are sleep deprived or under the inuence of alcohol should avoid utilizing the unit’s 3D functionality . If you experience any of the following symptoms, st.
6 English Usage Notice ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen.
7 English Introduction Documentation : W arranty Card Quick Start Card WEEE Card (for EMEA only) Due to different applications in each Country , some regions may have different accessories.
8 English Introduction Product Overview V entilation (outlet) 1. V entilation (inlet) 2. Focus Ring 3. Zoom Ring 4. IR Receivers 5. Control Panel 6. Lens 7.
9 English Introduction POWER 8 6 2 4 5 3 7 11 10 9 1 12 A V Mute 1. Menu 2. Source 3. Enter 4. Re-Sync 5. Power 6. Keystone Correction 7. Four Directional Select Keys 8.
10 English Introduction VGA2-IN/YPbPr VIDEO 3D SYNC Out ( 5V ) AUDIO OUT RS-232C AUDIO2-IN (VIDEO) AUDIO1-IN (VGA 1/2) MOUSE/ SERVICE HDMI 1 HDMI 2 VGA1-IN/YPbPr/ VGA-OUT Input/Output Connections USB Service for rmware upgrade 1. HDMI 1 Connector (v1.
11 English Introduction Remote Control Power On 1. Power Off 2. 16:9 3. Native 4. Gamma 5. 3D format 6. V ol+/- 7. Enter 8. Re-Sync 9. VGA1 Source 10. Video Source 1 1. HDMI2 Source 12. VGA2 Source 13. HDMI1 Source 14. Menu 15. Four Directional Select 16.
12 English Installation The remote is subject to model’s specications. LED Indicator 1. Power On/Off 2. Source 3. Mouse Left Click 4. Enter 5. Four Directional Select 6. Keys / Mouse control Switch (turn on/off 7. mouse function) Re-Sync 8. Mouse Right Click 9.
13 English Installation Connect to Computer/Notebook Connecting the Projector VGA2-IN/YPbPr VIDEO 3D SYNC Out ( 5V ) AUDIO OUT RS-232C AUDIO2-IN (VIDEO) AUDIO1-IN (VGA 1/2) MOUSE/ SERVICE HDMI 1 HDMI 2 VGA1-IN/YPbPr/ VGA-OUT MOLEX mole x E62405SP R 1 2 3 5 1.
14 English Installation VGA2-IN/YPbPr VIDEO 3D SYNC Out ( 5V ) AUDIO OUT RS-232C AUDIO2-IN (VIDEO) AUDIO1-IN (VGA 1/2) MOUSE/ SERVICE HDMI 1 HDMI 2 VGA1-IN/YPbPr/ VGA-OUT E62405SP R Connect to Video Sources 1...........................................
15 English Installation Connect to 3D V ideo Devices The 3D video source device must be powered on before the 3D projector . If input video is normal 2D, please press “3D Format” and switch to “Auto”. If “SBS Mode” is active, 2D video content will not display correctly .
16 English Installation 3D Broadcast 3D Blu-ray™ Disc 3D Console Games SKY+HD, cable/satellite box 3D Blu-ray™ Player PlayStation ® 3 3D Glasses Full 3D 1080p DLP ® Projector POWER SOURCE.
17 English Installation T o turn ON 3D glasses: Press the “Power” button and the LED will ash 1. one time indicating the glasses are ready to use 3D mode. V erify that 3D content is being sent to the projector and signal is compat - 2. ible with projector specications.
18 English Installation POWER SOURCE Powering On/Off the Projector T urn on the projec- tor rst and then select the signal sources. Powering On the Projector 1. Remove th e lens cap. 2. Securely connect the pow er cord and signal cable. When connected, the ON/ST ANDBY LED will turn Amber .
19 English Installation Powering Off the Projector 1. Press the “ ” button on the remote control or on the control panel to turn off the projector . The following message will be displayed on the screen. Power Off? Press Power again Press the “ ” button again to conrm otherwise the message will disappear after 15 seconds.
20 English Installation Contact the nearest service center if the projector displays these symptoms. See pages 65-66 for more information. W arning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: “LAMP” LED indicator is lit red and if “On/Standby” indicator ashes amber .
21 English Installation Adjusting the Projected Image Adjusting the Projector ’ s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector .
22 English Installation Adjusting the Projector ’ s Zoom / Focus Y ou may turn the zoom ring to zoom in or out. T o focus the im - age, rotate the focus ring until the image is clear . The projector will focus at distances from 4.92 to 32.80 feet (1.
23 English Installation This table is for user ’s reference only . Diagonal length (inch) size of 16:9 Screen Screen Size W x H Projection Distance (D) Offset (Hd) (m) (inch) (m) (feet) Width Height Width Height wide tele wide tele (m) (feet) 37.
24 English User Controls Using the Control Panel POWER Refer to the “Power On/Off the Projector” section on pages 18-19. RE-SYNC Automatically synchronize the projector to the input source. Enter Conrm your item selection. SOURCE Press “SOURCE” to select an input signal.
25 English User Controls Remote Control Using the Remote Control Power On Refer to the “Power On” section on page 18. Power Off Refer to the “Power On/Of f the Projector” section on page 19. Lamp Mode Increase/Decrease the luminance of the im - age.
26 English User Controls Using the Remote Control Enter Conrm your item selection. Source Press “Source” to select an input signal. Re-sync Automatically synchronizes the projector to the input source. Menu Display or exit the on-screen display menus for projector .
27 English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 18-19. L Button Mouse left click. R Button Mouse right click. Page + Use this button to page up. Page - Use this button to page down.
28 English User Controls Using the Remote Control HDMI2 Press “HDMI2” to choose source from HDMI 2 connector . Freeze Press “Freeze” to pause the screen image. Press this button again to unlock. A V mute Momentarily turns off/on the audio and video.
29 English User Controls Display Mode Brightness Contrast Sharpness Color Tint Advanced Photo IMAGE Sub Menu Settings Main Menu The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings.
30 English User Controls Menu T ree HD25 OSD Menu Tree.xls Main Menu Sub Menu Settings Image Display Mode Brightness -50~50 Contrast -50~50 Sharpness 1~15 Color -50~50 Tint -50~50 Advanced Noise Reduction 0~10 Gamma Film / Video / Graphics / Standard 1~10 Dynamic Black Off / Low / High Color Temp.
31 English User Controls Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. ( #1 ) “Color” and “T int” are only supported in Video mode. ( #2 ) “3D Sync Invert” is only available when 3D is enabled.
32 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Cinema: For home theater . ` Bright: Maximum brightness from PC input.
33 English User Controls Color Adjust a video image from black and white to fully saturated color . Press the ◄ to decrease the color saturation in the image. ` Press the ► to increase the color saturation in the image. ` T int Adjust the color balance of red and green.
34 English User Controls IMAGE | Advanced Noise Reduction The Noise Reduction reduces the amount of visible noise inter - laced signals. The range is from “0” to “10”.
35 English User Controls Color Settings Press ► into the next menu and then use ▲ or ▼ or ◄ or ►to select item. Color Settings Red Green Blue White Cyan Magenta Y ellow Reset Exit Red/Green/Blue/Cyan/Magenta/Y ellow ` : Use ◄ or ► to select Hue, Saturation and Gain Colors.
36 English User Controls IMAGE | Advanced | Signal (VGA) Automatic Automatically congures the signal (the Frequency and Phase items are grayed out). If Automatic is disabled, the Frequency and Phase items will appear for user to manually tune and save the settings.
37 English User Controls IMAGE | Advanced | Signal (V ideo) White Level Allow user adjust White Level when inputting Video signals. Black Level Allow user adjust Black Level when inputting Video signals. Saturation Adjust a video image from black and white to fully saturated color .
38 English User Controls DISPLA Y Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4x3 input sources. ` 16:9: This format is for 16x9 input sources, like HDTV and ` DVD enhanced for Widescreen TV .
39 English User Controls Each I/O has differ- ent setting of “Edge Mask”. “Edge Mask” and “Zoom” can’t work at same time. 16:9 Screen 480i/p 576i/p 1080i/p 720p PC 4:3 1440 x 108.
40 English User Controls “3D sync. Invert” func - tion wouldn’t save the setting. It will set to “Off” when powers on and changes source. 3D Format is only sup - ported on 3D T iming on page 58. “3D Format” is only supported on non- HDMI 1.
41 English User Controls SETUP Language Choose the multilingual OSD menu. Press ► into the sub menu and then use the ▲ or ▼ or ◄ or ► key to select your preferred language. Press “Enter” to nalize the selection. Language Exit Projection ` Front-Projection This is the default selection.
42 English User Controls Menu Location Choose the menu location on the display screen. Projector ID ID denition can be set up by menu (range 0-99), and allow user control an individual projector by RS232. Refer to pages 60-63 for the complete list of RS232 commands.
43 English User Controls SETUP | Audio Settings Internal Speaker Choose the “On” or “Off” to turn on or of f the internal speaker . Mute Choose the “On” to turn mute on.
44 English User Controls SETUP | Security Security On: Choose “On” to use security verication when the turning ` on the projector . Off: Choose “Of f” to be able to switch on the projector without ` password verication.
45 English User Controls SETUP | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Default: The default startup screen. ` Neutral: Logo is not displayed on startup screen.
46 English User Controls Input Source Use this option to enable / disable input sources. Press ► to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will only search for inputs that are enabled.
47 English User Controls Background Color Use this feature to display a “Black”, “Red”, “Blue”, “Green” or “White”, screen when no signal is available. Reset Current: Choose “Y es” to return the display parameters on this ` menu to the factory default settings.
48 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp.
49 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control.
50 English Appendices T roubleshooting If you experience a problem with your projector , please refer to the following information. If a problem persists, please contact your local reseller or service center .
51 English Appendices Image has slanted sides: If possible, reposition the projector so that it is centered on the ` screen and below the bottom of the screen. Use “Display-->V Keystone” from the OSD to make an adjust - ` ment. Image is reversed Select “Setup-->Projection” from the OSD and adjust the pro - ` jection direction.
52 English Appendices Other Problems The projector stops responding to all controls If possible, turn off the projector, then unplug the power cord ` and wait at least 20 seconds before reconnecting power. Lamp burns out or makes a popping sound When the lamp reaches its end of life, it will burn out and may ` make a loud popping sound.
53 English Appendices Steady light No light Message ON/STANDBY LED Temp-LED Lamp-LED (Green/Amber) (Red) (Red) Standby State (Input power cord) Amber Power on (W arming) Flashing Green Lamp lighting Green Power off (Cooling) Flashing Green Error (Over T emp.
54 English Appendices Power off: Power Off? Press Power again Lamp warning: Lamp Warning Lamp life exceeded. T emperature warning: Please: 1. Make sure air in and outlets are not blocked. 2. Make sure the environment temperature is under 45 degree C.
55 English Appendices The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. Lamp Warning Lamp life exceeded. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible.
56 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on the cover .
57 English Appendices Computer/Video/HDMI/Mac Compatibility Compatibility Modes (*1) 1920 x1200 @60Hz only support RB (reduced blank - ing). (*2) 3D timing for T rue 3D projector . (*3) is not supported HDMI input singal for Mac. 120Hz input signals may be dependent on graphics cards support.
58 English Appendices Signal Resolution Refresh Rate (Hz) Video Analog HDMI Mac SDTV (576i) 768 x 576 50 O - O - SDTV (576p) 768 x 576 50 O - O - SDTV (480i) 640 x 480 60 O - O - SDTV (480p) 640 x 480 60 O - O - 3D Input Video Compatibility Input Resolution HDMI 1.
59 English Appendices RS232 Pin Assignments Pin no. Spec. (from projector side) 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9 RS232 Commands and Protocol Function List.
60 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F There is a <CR> after all ASCII com - mands.
61 English Appendices ----------------------------- --------------------------------------- ------------------------------------------ ---------------------------------------------------- ------------.
62 English Appendices ----------------------------- --------------------------------------- ------------------------------------------ ---------------------------------------------------- ------------.
63 English Appendices ----------------------------- --------------------------------------- ------------------------------------------ ---------------------------------------------------- ------------.
64 English Appendices Please note that damage resulting from incorrect installation will void the warranty . Ceiling Mount Installation T o prevent damage to your projector , please use the Optoma 1. ceiling mount. If you wish to use a third party ceiling mount kit, please ensure 1.
65 English Appendices Optoma Global Ofces USA 3178 Laurelview Ct. Fremont, CA 94538, USA www .optomausa.com Canada 2420 Meadowpine Blvd., Suite #105 Mississauga, ON, L5N 6S2, Canada www .optoma.ca Latin America 3178 Laurelview Ct. Fremont, CA 94538, USA www .
66 English Appendices Deutschland Wiesenstrasse 21 W D40549 Düsseldorf, Germany Scandinavia Lerpeveien 25 3040 Drammen Norway PO.BOX 9515 3038 Drammen Norway Korea WOOMI TECH.
67 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector . FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
68 English Appendices Declaration of Conformity for EU countries EMC Directive 2004/108/EC (including amendments) y Low V oltage Directive 2006/95/EC y R & TTE Directive 1999/5/EC (if product has RF function) y Do not throw this electronic device into the trash when discarding.
69 English Appendices T rademarks DLP is trademarks of T exas Instruments. • IBM is a trademark or registered trademark of International • Business Machines Corporation. Macintosh, Mac OS X, iMac, and PowerBook are trade - • marks of Apple Inc., registered in the U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Optoma Technology HD25LV è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Optoma Technology HD25LV - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Optoma Technology HD25LV imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Optoma Technology HD25LV ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Optoma Technology HD25LV, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Optoma Technology HD25LV.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Optoma Technology HD25LV. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Optoma Technology HD25LV insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
