Manuale d’uso / di manutenzione del prodotto EH1020 del fabbricante Optoma
Vai alla pagina of 60
1 English T able of Contents ................................................................................... 1 Usage Notice .......................................................................................... 2 Safety Information ...........
2 English Usage Notice Safety Information The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suf cient magnitude to constitute a risk of electric shock to persons.
3 English Usage Notice When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. T o replace the lamp, follow the procedures listed under “Replacing the Lamp” section on pages 48-49.
4 English Usage Notice Do: Turn of f and unplug the power plug from the AC outlet before cleaning the product. Use a soft dry cloth with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time.
5 English Usage Notice Eye Safety W arnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen.
6 English Introduction Due to different applications in each Country , some regions may have different accessories. Power Cord 1.8 m IR Remote Control Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box.
7 English Introduction Product Overview 1. Control Panel 2. Zoom Ring 3. Focus Ring 4. Zoom Lens 5. IR Receivers 6. T ilt-Adjustment Feet 7. Security Bar 8.
8 English Introduction Control Panel POWER ? 8 6 2 4 5 3 7 1 1 10 9 1 1. Help 2. Menu 3. Source 4. Enter 5. Re-Sync 6. Power 7. Keystone Correction 8. Four Directional Select Keys 9.
9 English Introduction Input / Output Connections 1. USB Connector (Connect to PC for Remote Mouse function) 2. VGA-Out Connector (Monitor Loop-through Output from VGA-In) 3. VGA-In/YPbPr/” ” Connector (PC Analog Signal/Component Video Input/HDTV/YPbPr/ Wireless Dongle) 4.
10 English Introduction Remote Control 1. LED Indicator 2. Power On/Off 3. Page Up 4. Mouse Right Click 5. Four Directional Select Keys 6. Re-Sync 7. Page Down 8. V olume +/- 9. Zoom 10. A V mute 1 1. Video 12. VGA 13. Freeze 14. S-Video 15. HDMI 16. Brightness 17.
1 1 English Installation Connecting the Projector Connect to Computer/Notebook 1....................................................................................................Power Cord 2...........................................................
12 English Installation VGA-OUT S-VIDEO VIDEO AUDIO-OUT RS-232 USB AUDIO-IN-L HDMI AUDIO-IN 12V OUT SCART / YPbPr / VGA-IN AUDIO-IN-R (VGA) (S-VIDEO/VIDEO) (S-VIDEO/VIDEO) E62405SP R Connect to Video Sources 1..........................................
13 English Installation Powering the projector On / Off T urn on the projector rst and then select the signal sources. Powering On the Projector 1. Remove the lens cap. 2. Securely connect the power cord and signal cable. When connected, the ON/ST ANDBY LED will turn Amber .
14 English Installation Contact the nearest service center if the projector displays these symptoms. See pages 57-58 for more information. W arning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: “LAMP” LED indicator is lit red and if “On/Standby” indicator ashes amber .
15 English Installation Adjusting the Projected Image Adjusting the Projector ’s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector .
16 English Installation Adjusting the Projector ’s Zoom / Focus Y ou may turn the zoom lever to zoom in or out. T o focus the image, rotate the focus ring until the image is clear . 1.2x Zoom series will focus at distances from 4.92 to 32.81 feet (1.
17 English User Controls Control Panel Control Panel & Remote Control Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 13-14. RE-SYNC Automatically synchronize the projector to the input source. Enter Con rm your item selection.
18 English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. Laser Press to use laser pointer . L Button Mouse left click. R Button Mouse right click. Page + Use this button to page up.
19 English User Controls Remote Control Using the Remote Control HDMI Press “HDMI” to choose HDMI source. Freeze Press “Freeze” to pause the screen image. Press this button again to unlock. A V mute Momentarily turns off/on the audio and video.
20 English User Controls Using the HELP button The HELP function ensures easy setup and operation. Press the “?” button on the control panel to open the Help Menu.
21 English User Controls Help menu button functions only when no input source is detected. Please refer to the “T roubleshooting” section on pages 43-46 for more details.
22 English User Controls If input source is detected and help button is pressed, the following pages will appear to help diagnose any problems..
23 English User Controls The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. T o open the OSD menu, press “Menu” on the Remote Control or Projector Keypad.
24 English User Controls Menu T ree * # # ( # ) “Saturation” and “T int” are only supported in Video mode. ( * ) “Signal” is only supported in Analog VGA (RGB) signal. ( ** ) “IRE” is only supported in NTSC signal.
25 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images. Presentation: Good color and brightness from PC input. Bright: Maximum brightness from PC input. Movie: For home theater . sRGB: Standardised accurate color .
26 English User Controls IMAGE Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Press the to decrease the contrast. Press the to increase the contrast. Sharpness Adjust the sharpness of the image.
27 English User Controls IMAGE | Advanced Noise Reduction The motion Adaptive Noise Reduction reduces the amount of vis- ible noise interlaced signals. The range is from “0” to “10”. (0: Of f) Gamma This allows you to choose a gamma table that has been ne-tuned to bring out the best image quality for the input.
28 English User Controls Advanced | Color Settings Color Settings Use these settings for advanced adjustment of the individual Red, Green and Blue Colors. Reset Choose “Y es” to return the factory default settings for color adjustments. Advanced | Input Source Input Source Use this option to enable / disable input sources.
29 English User Controls DISPLA Y Format Use this function to choose your desired aspect ratio. 4:3: This format is for 4×3 input sources. 16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV .
30 English User Controls Input Signal Display area Picture area Display on Screen 4:3 format 16:9 format LBX format Native format Detail informations about LBX mode : 1. Some Letter-Box DVDs are not enhanced for 16x9 TVs. In this situation, the image will not look right when displayed in 16:9 mode.
31 English User Controls Zoom Press the to reduce the size of an image. Press the to magnify an image on the projection screen. Overscan Overscan function removes the noise in a video image. Overscan the image to remove video encoding noise on the edge of video source.
32 English User Controls Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language.
33 English User Controls SETUP Menu Location Choose the menu location on the display screen. Projection Front-Desktop This is the default selection. The image is projected straight on the screen. Rear-Desktop When selected, the image will appear reversed.
34 English User Controls SETUP Mute Choose the “On” to turn mute on. Choose the “Of f” to turn mute off. Audio Input The default audio settings are on the back panel of the projector . Use this option to reassign any of the Audio Inputs (1, or 2) to the current image source.
35 English User Controls SETUP | Security Security On: Choose “On” to use security verication when the turning on the projector . Off: Choose “Of f” to be able to switch on the projector without password verication. T imer-Month/Day/Hour Use this function to set the how long (Month/Day/Hour) the projector can be used.
36 English User Controls SETUP | Security Password default value is “1234” (rst time). Change Password First time: 1 . Press “ ” to s et the pas sword. 2. The pa sswor d has to be 4 dig its. 3. Use numb er but ton o n the re mote to enter your new passwo rd and t hen pre ss “ ” ke y to con r m your passwo rd.
37 English User Controls Phase Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or ickers, use this function to correct it. Frequency Change the display data frequency to match the frequency of your computer ’s graphic card.
38 English User Controls SETUP | Signal - V ideo Source “IRE” is only supported in NTSC signal. “Signal” is not supported when the source is HDMI or DVI-D. White Level Allow user adjust White Level when inputting S-Video or V ideo/ CVBS signals.
39 English User Controls SETUP | Advanced Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. Optoma: The default startup screen. User: Use stored picture from “Logo Capture” function.
40 English User Controls Source Lock On: The projector will only search current input connection. Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster .
41 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control.
42 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp.
43 English Appendices No image appears on-screen Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section. Ensure all the pins of connectors are not bent or broken. Check if the projection lamp has been securely installed.
44 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. V erify that the resolution setting of the monitor display is lower than or equal to 1920 × 1080.
45 English Appendices Image is out of focus Make sure the lens cap is removed. Adjust the Focus Ring on the projector lens. Make sure the projection screen is between the required distance.
46 English Appendices The projector stops responding to all controls If possible, turn off the projector , then unplug the power cord and wait at least 60 seconds before reconnecting power . Check that “Keypad Lock” is not activated by trying to control the projector with the remote control.
47 English Appendices On Screen Messages T emperature warning: Fan failed: Lamp warming: Out of display range: Remote Control If the remote control does not work Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector .
48 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible.
49 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the two screws on the cover .
50 English Appendices Compatibility Modes Computer Compatibility For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.
51 English Appendices Video Compatibility NTSC M (3.58MHz), 4.43 MHz P AL B, D, G, H, I, M, N SECAM B, D, G, K, K1, L SDTV/HDTV 480i/p, 576i/p, 720p@50Hz/60Hz, 1080i/p@50Hz/60Hz.
52 English Appendices RS232 Pin Assignments Pin no. Spec. (from projector side) 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9 RS232 Commands and Protocol Function List Pin no.
53 English Appendices RS232 Protocol Function List ---------------------------------------------------- ---------------------------------------------------- -------------------------------------------.
54 English Appendices ---------------------------------------------------------- ----------------------------------------------------------- ---------------------------------------------------------- .
55 English Appendices ------------------------------------------------------------- -------------------------------------------------------- ---------------------------------------------------------- .
56 English Appendices Please note that damage resulting from incorrect installation will invalidate the warranty . Ceiling Mount Installation 1.
57 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 715 Sycamore Drive T el : 408-383-3700 Milpitas, CA 95035, USA Fax: 408-383-3702 www .optomausa.com Service : services@optoma.com Canada 5630 Kennedy Road, Mississauga, T el : 905-361-2582 ON, L4Z 2A9, Canada Fax: 905-361-2581 www .
58 English Appendices Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Kangnam-Ku, T el : +82+2+34430004 seoul,135-815, KOREA Fax: +82+2+34430005 Japan 東京都足立区綾瀬 3-25-18 株式会社オーエスエム E-mail : info@osscreen.com サポートセンター : 0120-46-5040 www .
59 English Appendices Regulation & Safety notices This appendix lists the general notices of your projector . FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules.
60 English Appendices Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference received, including interference that may cause undesired operation.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Optoma EH1020 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Optoma EH1020 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Optoma EH1020 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Optoma EH1020 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Optoma EH1020, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Optoma EH1020.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Optoma EH1020. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Optoma EH1020 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
