Manuale d’uso / di manutenzione del prodotto TXNR525 del fabbricante Onkyo
Vai alla pagina of 120
E n AV RECEIVER TX-NR525 Instruction Manual Contents Safety Information and Introduction ............ 2 Table of Contents ............. .............. ........... ..... 5 Connections ....... .............. ........... .............. ... 11 Turning On & Basic Operati ons .
En-2 Safety Information and Introduction Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow al l instruc tions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7.
Safety Information and Introduction En-3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording co pyrighted material is ille gal without the permission of th e copyright holder. 2. AC Fuse —The AC fuse inside th e unit is not user- serviceable.
Safety Information and Introduction En-4 For Canadian Models NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. For models having a pow er cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Safety Information and Introduction En-5 Table of Contents Safety Information and Intro duction Important Safety Instructions ......................................2 Precautions ................................................................... 3 Supplied Accessories.
Safety Information and Introduction En-6 Features Amplifier • 80 Watts/Channel @ 8 ohms (FTC) • 130 Watts/Channel @ 6 ohms (IEC) • 160 Watts/Channel @ 6 ohms (JEITA) • WRAT–Wide Range Amplifier Technology (5 Hz to 100 kHz bandwidth) • Optimum Gain Volume Circuitry • H.
Safety Information and Introduction En-7 Front & Rear Panels For detailed information, see the pages in parentheses. a 8 ON/STANDBY button ( 20 ) b ZONE 2, OFF butto ns ( 56 ) c Remote control sen.
Safety Information and Introduction En-8 s For detailed information, see the pages in parentheses. a Z2 (Zone 2) indicato r ( 56 ) b 3D indicator This lights when a 3D input signal is detected .
Safety Information and Introduction En-9 See “Connecting the AV Receiver” for connecti on ( ➔ pages 11 to 19 ). a u REMOTE CONTROL jack b COMPONENT VIDEO IN and OUT jacks c USB port d ETHERNET p.
Safety Information and Introduction En-10 Remote Controller To control the AV receiver, press RECEIVER to select Receiver mode. For detailed information, see the pages in parentheses.
En-11 Connections Connecting the AV Receiver Speaker Configurati on The following table indicates the cha nnels you should use depending o n the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended fo r a really powerful and solid bass.
Connections En-12 Connecting the Speaker Cables/Powere d Subwoofers Please connect a , b , c , d , e and f for 5.1-channel surround. • Pay close attention to speaker wirin g polarity. In other words, connect positive (+) terminals only to positive (+) terminals, and negati ve (–) terminals only to negative (– ) terminals.
Connections En-13 ■ Speaker Connection Prec autions • You can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the buil t-in amp protection circuit may be activated.
Connections En-14 If you select the input select or butto n, the signal from the component connected to the assigned ja ck is played. • Before making an y AV connections, read the manuals supplied with your AV components. • Push plugs in all the way to make good conn ections (loose connections can cause noise or malfunctions).
Connections En-15 • If a phono equalizer is not installed on the turntable to connect, it has to be prepared separately. Use a phono equalizer which is compatible with the cartridge of the turntable. • Only the front-panel USB input is compatible with iPod/iPhone and Onkyo wireless LAN adapter UWF-1.
Connections En-16 ■ For p -compatible TV The following linked operations are enabled by connecting the AV receiver to an p -co mpatible TV. • The AV receiver will enter standby mode when the TV is set to standby.
Connections En-17 The video and audio signal flo w Connect the AV receiver between the AV components and the TV. The signal from th e AV components is carried through th e AV receiver.
Connections En-18 ■ Coaxial digital audio Coaxial digital con nections allow you to enj oy digital sound such as PCM *1 , Dolby Digital or DTS. The audio quality is the same as optical. ■ Analog audio (RCA) Analog audio connection s (RCA) carry analog audio.
Connections En-19 With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u , while the AV receiver is on standby, the AV receiver will auto matically turn on and select that component as the input source.
En-20 Turning On & Basic Operations Turning On/Off the AV Receiver Note • Before connecting the power cord, con nect all of your speakers and AV components. • Turning on the AV receiver ma y cause a momentary power surge that might interfere with other electrical equipment on the same circuit.
Turning On & Basic Operations En-21 With the supplied calib rated microphone, Audyssey MultEQ ® automatically determines the number of speakers connected, their size for purposes of bass management, opti mum crossover frequencies to the subwoofer (if present), and distances from the primary listening position.
Turning On & Basic Operations En-22 1 Turn on the AV receiver and the connected TV. On the TV, select the input to which the AV receiver is connected. 2 Set the speaker setup microphone at the Main Listening Position a , and connect it to the SETUP MIC jack.
Turning On & Basic Operations En-23 Note • You can cancel Audyssey MultEQ ® Room Correctio n and Speaker Setup at any point in this procedure simply by disconnecting the setup microphone. • Do not connect or disc onnect any speakers during Audyssey MultEQ Room Correction and Speaker Setup.
En-24 Playback Playback This section describes the basic operati on such as playback, listening mode, and other use ful functions. Reading this man ual from the beginning to this section helps you to understand th e basic connection/setup/operatio n.
Playback En-25 ( ➔ page 26 ) Tip • See “Controlling Other Components” about the operation of other components ( ➔ page 57 ). Note • The buttons you can use will differ depending on the devices and media used for playback. Controlling Contents of USB or Network Devices d k j m b a c f g l n o q h i p e Press USB or NET first.
Playback En-26 This section describes icons that appear on the AV receiver’s display during med ia playback. Tip • The on-screen menus appear only on a TV that is connected to the HDMI OUT . This section explains how to play music files on the iPod/iPhone.
Playback En-27 Tip • The on-screen menus appear only on a TV that is connected to the HDMI OU T . This section explains ho w to play music files from a USB device (e.g., USB flash drives and MP3 players). See also: • “Network/USB Features” ( ➔ page 72 ) Note • While the message “ Connecting.
Playback En-28 Adding TuneIn radio stations or p rograms to My Favorites/My Presets There are two ways you can register specific Internet radio stations (programs) from the TuneIn. • Adding to My Favorites The selected program will be added to “ My Favorites ” on the “ NET ” screen, w hich appears when pressing NET .
Playback En-29 You need to connect the AV receiver to your home network ( ➔ page 15 ). Tip • The on-screen menus appear only on a TV that is connected to the HDMI OU T . This section explains ho w to play music files on a computer or media server through the AV receiver (Server Playback).
Playback En-30 This section explains ho w to play music files on a computer or NAS (Network Attached Storag e) through the AV receiver. Windows 8/Windows 7 Setup ■ Setting the sharing options ■ Cr.
Playback En-31 You need to connect the AV receiver to your home network ( ➔ page 15 ). Tip • The on-screen menus appear only on a TV that is connected to the HDMI OU T .
Playback En-32 This section describes the procedure of usi ng the buttons on the front p anel, unless otherwise specified. Using the Tuner With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite station s as presets for quick selection.
Playback En-33 ■ Selecting Presets ■ Deleting Presets Using RDS (excluding North American and Taiwanese models) When tuned into an RDS station, the RDS indicator lights. When the station is broadca sting text information, the text can be displayed.
Playback En-34 ■ Listening to Traffic News (TP) You can search fo r stati ons that broadcast traffic news. RDS program types (PTY) You can listen to the audio of one input source whil e watching the video of anoth er.
Playback En-35 About Listenin g Modes The AV receiver’s listening mo des can transform your listening room i nto a movie theater or co ncert hall, with high fidelity an d stunning surround sound. Selecting Listening Modes ■ Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV.
Playback En-36 Input Source The following audio formats are su ppo rted by the listening modes. *1 The AV receiver outputs this sour ce in 5.1-channel surround sound. Speaker Layout The illustration shows which sp eakers are activated in each channel.
Playback En-37 ■ Listening Modes T-D (Theater- Dimensi onal) With this mode you can enjoy a virtual surround sound even with only two or three speakers.
Playback En-38 Note *1 (North American and Taiwanese m odels) This listening mode is not available. *2 Pure Audio cannot be selected when Zone 2 is active. Besides, if you activate Zone 2 while Pure Audio is selected, the listening mode will automatically switch to Direct.
Playback En-39 You can display va rious information about the current input source as follows. The following information can be typically displayed. *1 When AM or FM radio is us ed, the band, preset number, and frequency are displayed. *2 If the input signal is digital, the signal format is displayed.
Playback En-40 The Home menu provides quick access to frequentl y used menus. Tip • The on-screen menus appear only on a TV that is connected to the HDMI OU T . ■ Setup ` With this selection, y ou can access the common settings of th e on-screen Setup menu.
En-41 Advanced Operations On-screen Setup This section describes the procedure for usin g the remote controller unless otherwise specified. With the AV receiver conne cted to a TV, there are two ways of changing the settings on-screen: using the Quick Setup or the Setup Menu ( HOME ).
Advanced Operations En-42 Operating procedure ( ➔ page 41 ) You can change various audio settings fro m the Quick Setup ( ➔ page 41 ). Note • These settings are not available in either of the following cases: – The “ Audio TV Out ” setting is set to “ On ” ( ➔ page 53 ).
Advanced Operations En-43 Operating procedure ( ➔ page 41 ) Late Night ■ Late Night For Dolby Digital and Dolby Digital Plus sources, the options are: ` Off ` Low : Small reduction in dynamic range.
Advanced Operations En-44 Note • This procedure can also be per formed on the AV receiver by using HOME , the cursor buttons, and ENTER . • During Audyssey MultEQ ® Room Correction and Speaker Setup, messages, etc., that are displayed on the TV screen will appear on the AV receiver’s display.
Advanced Operations En-45 Operating procedure ( ➔ page 44 ) Explanatory Notes a Menu selection b Setting targ et c Setting options (de fault setting underl ined) If you connect a vid eo component to an HDMI input, you must assign that input to an input selector.
Advanced Operations En-46 Operating procedure ( ➔ page 44 ) If you connect a vi deo component to a comp onent video input, you must assign that input to an inpu t selector. For example, if you connect your Bl u-ray Disc/DVD player to COMPONENT VIDEO IN 2 , you must assign “ IN2 ” to the “ BD/DVD ” input selector.
Advanced Operations En-47 Operating procedure ( ➔ page 44 ) ■ Front ` Small : ` Large : Select based on the cone diameter. Note • If the “ Subwoofer ” set ting is set to “ No ”, this setting is fixed to “ Large ”. ■ Center *1 , Surround *1 ` Small : ` Large : Select based on the cone diameter.
Advanced Operations En-48 Operating procedure ( ➔ page 44 ) Here you can adjust the level of each speaker with the built-in test tone so that the volume of each speaker is the same at the listening position. Note • These settings cannot be calibrated in either of the following cases: – A pair of headphones is connected.
Advanced Operations En-49 Operating procedure ( ➔ page 44 ) DTS ■ Neo:6 Music Center Image ` 0 to 2 to 5 With this setting, you can specify by how much the front left and right channel outpu t is attenuated in order to create the center channel.
Advanced Operations En-50 Operating procedure ( ➔ page 44 ) at reference level when the master volume control is set to the 64 position. At that level you can hear the mix as the mixers heard it. Audyssey Dynami c EQ ® is referenced to the standard film mix level.
Advanced Operations En-51 Operating procedure ( ➔ page 44 ) Audio Selector ■ Audio Selector ` ARC : The audio signal from you r TV tuner can be sent to the HDM I OUT of the AV receiver. *1 With this selectio n, the TV’s audio can be automatically selected as a priority among other assignments.
Advanced Operations En-52 Operating procedure ( ➔ page 44 ) Tuner ■ AM/FM Freq Step (North American and Taiwanese models) ` 10 kHz/200 kHz : ` 9k H z / 5 0k H z : Select the frequency step according to your area. ■ AM Freq Step (European, Australian and Asian models) ` 10 kHz : ` 9k H z : Select the frequency step according to your area.
Advanced Operations En-53 Operating procedure ( ➔ page 44 ) ■ HDMI Through ` Off ` BD/DV D , CBL/SAT , GAME , PC , AUX , TV/CD : Selects the input source for which the HDMI Through functio n is enabled. ` Last : The HDMI Through functi on is activated on the input source selected at the time of setting the AV receiver to stand by mode.
Advanced Operations En-54 Operating procedure ( ➔ page 44 ) ■ InstaPrevue These settings apply to “ InstaPrevue ” of the Home menu ( ➔ page 40 ) and specify the preview display of HDMI video streams. Sub Window ` Multi : Displays preview thumbnails all at once.
Advanced Operations En-55 Operating procedure ( ➔ page 44 ) ■ Network Standby ` On ` Off This setting enables or disables control over the network. When enabled, the NET indi cator will be dimly-lit while the AV receiver is in standby mode. Note that the indicator may not l ight under certain conditions ( ➔ page 20 ).
Advanced Operations En-56 Zone 2 In addition to the main listening room, you can also enjoy playback in a nother room, or as we call Zone 2. And, you can select a diff erent source f or each room. Connecting the Zone Speaker s to an Additional Amplifier This setup allows 5.
En-57 Controlling Other Components Controlling Other Components You can use the AV receiver’ s remote contro ller to control your other AV compon ents, including those made by other manufactu rers. This section explains how to enter the remo te control code for a componen t that you want to cont rol: DVD, TV, C D, etc.
Controlling Other Components En-58 Onkyo components that are connected via u are controlled by pointing the remote controller at the AV receiver, not the component.
Controlling Other Components En-59 Controlling a Blu-ray Disc/DVD Player, HD DVD Player or DVD Recorder BD/DVD is preprogrammed with the remote control code for controlling a componen t that supports the p *1 (limited to some models). The component must be able to receive remote control commands via p and be connected to the AV receiver via HDMI.
Controlling Other Components En-60 ■ DVD player/DVD reco rder operation ■ VCR/PVR operation ■ Cassette tape deck operation ■ Satellite receiver/Cable receiver oper ation ■ CD player/CD recorder/MD recorder operation Note • With some components, certain buttons may not work as expected, and some may not work at all.
Controlling Other Components En-61 RI Dock With the RI Dock, you can easily play the music of your iPod/iPhone, or watch the slideshows and videos of your iPod/iPhone on a TV.
Controlling Other Components En-62 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control your iPod/iPhone in the Dock with the buttons described furth er in this section. See “Entering Remote Control Codes” for deta ils on entering a remote control code ( ➔ page 57 ).
En-63 Appendix Troubleshooting If you have any trouble using the AV receiver, look for a solution in this sectio n. If you can’t resolve the issue yourself, contact your Onkyo dealer. If you can’t resolve the iss ue yourself, try resetting the AV receiver before contacti ng your Onkyo dealer.
Appendix En-64 ■ Only the front speakers produce sound ■ Only the center sp eaker produces sound ■ The surround speakers produce no sound ■ The center speaker produces no sound ■ The subwoofer pr oduces no sound ■ There’s no sound with a certain signal format ■ Can’t select the Pure Audio listening mode ■ Can’t get 5.
Appendix En-65 ■ There’s no picture from a source connected to an HDMI IN ■ The on-screen me nus don’t app ear ■ Reception is noisy, FM stereo reception is noisy, or the FM STEREO in dicator.
Appendix En-66 ■ There’s no sound ■ Can’t access the server or Internet radio ■ Playback stops while listen ing to music files on the server ■ Can’t connect to the AV receiver fr om a We.
Appendix En-67 • Video Atten uation This setting can be made for th e BD/DV D , CBL/SAT , GAME , PC , AUX or USB input. If you have a game console connected to the composite video input, and the picture isn’t ve ry clear, you can attenuate the gain.
Appendix En-68 Operating procedure ( ➔ page 44 ) Firmware Update To update the firmware of the AV receiver, you can choose from the following two methods: update via network, or update via USB storage. Choose the one that best suits your envir onment.
Appendix En-69 Operating procedure ( ➔ page 44 ) Troubleshooting Case 1: If an error occurs, “ Error!! *-* * ” is displayed on the AV receiver’s disp lay. (Alpha-num eric characters o n the front display are deno ted by asterisks.) Refer to the following table and take approp riate action.
Appendix En-70 Operating procedure ( ➔ page 44 ) Update Procedure Troubleshooting Case 1: If an error occurs, “ Error !! *-** ” is displayed on the AV receiver’s display. (Alpha-numeric characte rs on the front display are denoted b y asterisks.
Appendix En-71 About HDMI Designed to meet the increa sed demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface stan dard for connecting TVs, projectors, Blu-ray Disc pl ayers/DVD players, se t-top boxes, and other video components.
Appendix En-72 Network/USB Features ■ Ethernet Network For the best results, a 100Base-TX switched Ethern et network is recommended. Although it’s possible to play music on a computer that’s connected to the network wirelessly, playback may be unreliable, so it is recommended to use wired connections.
Appendix En-73 • Operation is not guaranteed for all USB devices, which includes the ability to power them. • Do not connect your USB device via a USB hub. The USB device must be connected directly to t he AV receiver’s USB port. • If the USB device contains a lot of data, the AV receiver make take a while to read it.
Appendix En-74 License and Trademark Information “x.v.Color” is a trademar k of So ny Corporation. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.
Appendix En-75 Specifications Amplifie r Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and fea tures are subject to change without notice.
2-1, Nisshin-cho , Ney aga wa-shi, OSAKA 572-8540, J AP AN http://www .onkyo .com/ 18 P ark W a y , Upper Saddle River , N.J. 07458, U.S .A. For Dealer , Service, Order and all other Business Inquir ies: T el: 201-785-2600 F ax: 201-785-2650 http://www .
Using Internet Radio En-1 Using Internet Radio Note • Available services may vary depending on the region. • Certain network service or c ontents available through this device may not be accessible in case the service provider terminates its service.
Using Internet Radio En-2 Pandora is a free, persona liz ed Internet radi o service that plays the music you know and helps you discover music you’ll love. PANDORA, the PANDORA l ogo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc.
Using Internet Radio En-3 Using Rhapsody (U.S. only) 1 Use q / w to select “Sign in to your acc ount” and then press ENTER. To use Rhapsody, you need an account. If you don’t have one yet, you can create a new account at www.rhapsody.com/onkyo If you have an existing Rhapsody account, se lect “ Sign in to your account ” and press ENTER .
Using Internet Radio En-4 Your Onkyo AV receiver includes a free trial of SiriusXM Internet Radio. The “Account Info” screen shows how many days are left in your trial. After the trial period expires, if you wa nt to continue listening to the service, you must subscribe.
Using Internet Radio En-5 Last.fm is a music service that learns what you love... Your new Onkyo AV receiver is very clever. If you have a free Last.fm account, it will keep track of all the songs you’ve just pl ayed.
Using Internet Radio En-6 Using Slacker Personal Radio 1 If you do not have an account, create one on the Slacker website (w ww.slacker.com) with your computer. If you already have a Slacker account, select “Sign in to your account” and then press ENTER.
Using Internet Radio En-7 Listen to your music collection on your home stereo in complete digital fidelity without a personal computer plus safely backup all yo ur songs.
Utilisation d’une webradio Fr-1 Utilisation d’une webradio Remarque • Les services disponibles peuvent varier en fonction de la région. • Certain services réseau ou contenus disponible via cet appareil peuvent être inaccessibles au cas où le prestataire de services termi nerait son service.
Utilisation d’une webradio Fr-2 Pandora est un service de radio en ligne libre et personnalisé vous permettant de lire la musique que vous connaissez et de déco uvrir celle que vous aimez. PANDORA, le logo PANDORA, et l’habillage commercial Pandora sont de s marques commerciales ou des marques dé posées de la société Pandora Media, Inc.
Utilisation d’une webradio Fr-3 Utilisation de Rhapsody (Etats-Unis uniquement) 1 Utilisez q / w pour sélectionner « Sign in to your account », puis appuyez sur ENTER. Vous devez posséder un compte pour utiliser Rhapsody. Si vous ne d isposez pas encore d’un compte, vous pouvez en créer un à partir de www.
Utilisation d’une webradio Fr-4 Votre ampli-tuner AV Onkyo comprend un essai gratuit de SiriusXM Internet Radio. L’écran « Account Info » affiche le nombre de jours restants dans votre essai. Une fois la période d’essai expirée, si vous souhaitez continuer à écouter le service, vous devez vous abonner.
Utilisation d’une webradio Fr-5 Last.fm un service de mu sique qui apprend ce que vous aimez… Votre nouv el ampli-tun er AV On kyo est très intelligen t. Si vous avez un compte Last.f m gratuit, il garde un e trace de t outes les ch ansons que vous avez juste jouées.
Utilisation d’une webradio Fr-6 Utilisation de Slacker Personal Radio 1 Si vous ne possédez pas de compte, créez-en un à partir du site Web de Slacker (www.slacker.com) à l’aide de votre ordinateur. Si vous possédez déjà un compte Slacker, sélectionnez « Sign in to your account », puis appuyez sur ENTER.
Uso de In ternet Radio Es-1 Uso de Internet Radio Nota • Los servicios disponibles pueden variar de una región a otra. • Es posible que determinados servicios de red o contenidos disponibles a través de este dispositivo no sean accesibles si el proveedor del servicio da por finalizado el servicio.
Uso de In ternet Radio Es-2 Pandora es un servicio de radio por Internet gratuito y personalizado que reproduce la música qu e usted conoce y le ayudará a de scubrir música que le encantará. PANDORA, el logotipo de PANDORA logo, y la imagen corporativa de Pando ra son marcas comerciales o marcas comerciales registradas de Pandora Media, Inc.
Uso de In ternet Radio Es-3 Uso de Rhapsody (sólo EE.UU.) 1 Utilice q / w para seleccionar “Sign in to your account” y luego pulse ENTER. Para utilizar Rhapsody, necesitará un a cuenta. Si todavía no tiene una, puede crear una nue va en www.rhapsody.
Uso de In ternet Radio Es-4 Su receptor de AV Onkyo incluye una prueba gr atuita de SiriusXM Internet Rad io. La pantalla “Account Info” muestra los días que que dan de la prueba. Una vez que termine el periodo de prueba, si desea seguir escuchando este servicio, deberá contratarlo.
Uso de In ternet Radio Es-5 Last.fm es un servicio mus ical que sabe lo que le gusta... Su nuevo receptor de AV Onkyo es muy inteligente. Si tiene una cuen ta gratuita de Last.fm, hará un seguimiento de todas las canciones que acaba de escuchar. Cuando vi site el sitio w eb de Last.
Uso de In ternet Radio Es-6 Uso de Slacker Personal Radio 1 Si no tiene una cuenta, cree una en el sitio web de Slacker (www.slacker.com) con su ordenador. Si ya tiene una cuenta de Slacker, seleccione “Sign in to your acco unt” y pulse ENTER. Aparecerá la pantalla de teclado.
SN 29401478IR US Y1212-1 *29401478IRUS*.
En-1 Using Internet Radio Using Internet Radio Note • Available services may vary depending on the region. • Certain network service or c ontents available through this device may not be accessible in case the service provider terminates its service.
Using Internet Radio En-2 Last.fm is a music service that learns what you love... Your new Onkyo AV receiver is very clever. If you have a free Last.fm account, it will keep track of all the songs you’ve just pl ayed.
Internetradio verwenden De-1 Internetradio verwenden Anmerkung • Die verfügbaren Dienste si nd länderabhängig verschieden. • Bestimmte Netzwerkdienste oder über dieses Gerät zur Verfügung stehende Inhalte stehen eventuell nicht zur Verfügung, falls der Service-Anbieter seine Dienstleistung beendet.
Internetradio verwenden Last.fm ist ein Musikdienst, der sich Ihre Lieblingsmusik merkt... Ihr neuer Onkyo AV-Receiver is t äußerst clever. Wenn Sie ein kostenloses Last.fm-Konto eingerichtet haben, werden darin alle kürzlich abgespielt en Titel gespeichert.
Remote Co ntrol Codes 1 Remote Control Codes / 1 While holding d own the REMOTE MO DE bu tton to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/ Remote indicator lights. On Integra products, button names are ca pitalized.
Remote Co ntrol Codes 2 Codes de télécommande Códigos de cont rol remoto 1 Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez associer un code, pressez et maintenez enfoncé le bou ton [DISPLAY] (pendant environ 3 secondes). Le bouton REMOTE MODE/le témoin Remote s’allume.
Remote Co ntrol Codes 3 Codici del telecomando Fernbedienungscodes 1 Tenendo premuto il tasto REMOTE MODE al quale si desid e ra assegnare il codice, premer e e tenere premut o [DISPLAY] (per circa 3 secon di). Il tasto REMOTE MODE/l'indi catore Remote si acce nde.
Remote Co ntrol Codes 4 Afstandsbedieningscod es Fjärrstyrningskoder 1 Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code wilt toewijzen de [DISPLAY] toet s ingedrukt (ongeveer 3 seconden). De toets REMOTE MODE (afstandsbed ieningsmodus) / Het indicatielampje afstandsbediening gaat branden.
Remote Co ntrol Codes 5 遙控代碼 遥控代码 1 在按住想指定編碼的 REMOTE MODE （遙控模式）按鈕時，同時按住 [DISPLAY] （顯示） （約 3 秒） 。 REMOTE MODE （遙控.
Remote Co ntrol Codes 6 Cable Set T op Bo x ADB 02254, 02769 Aon 02769 Arris 02187 AT&T 00858 Bright House 01376, 01877 BT Vision 02294 Cable & Wireless 01068 Cable One 01376, 0187 7 Cablecom .
Remote Co ntrol Codes 7 Neuf TV 03107 Philips 02294 Scientific Atlanta 00858 SFR 03107 Verizon 0237 8 CD/Cassette Dock TASCAM 73095 CD Advantage 70032 AH! 70157 Aiwa 70157 Arcam 70157 Atoll Electroniq.
Remote Co ntrol Codes 8 Jamo 82228 Logitech 82182 Onkyo 82990, 81993, 823 51 Polk Audio 8222 8 Video - Accessory ADB 02254, 02769 Aon 02769 Apple 02615 AT&T 00858 BT Vision 02294 Canal+ 02657 Cisc.
Remote Co ntrol Codes 9 Hama 01567 Hanseatic 01100 Hirschmann 00173 Hitachi 01284 Hornet 01300 HTS 00775 Humax 01377, 01176, 01427, 01675, 0180 8, 01882, 01915, 0214 4, 02408, 02616 ID Digital 01176 I.
Remote Co ntrol Codes 10 Star 00887 Stream System 01300 Strong 00853, 0 0879, 01284, 01300, 0140 9, 01626, 02418 Sunny 01300 Sunstar 00642 Supernova 00887 Supratech 01413 Systec 01334 Sytech 02418 TBo.
Remote Co ntrol Codes 11 Akura 10171, 10037, 10714, 10668, 1103 7, 11363, 11585, 1166 7, 11709 Alba 10037, 1071 4, 10668, 11037, 1158 5 Alien 11037 Allstar 10037 Amstrad 10171, 1003 7, 11037 Anam 1003.
Remote Co ntrol Codes 12 Ferguson 10037, 1062 5, 10560, 10195, 1103 7, 11585 Fidelity 10171, 10037, 105 12 Finlandia 1020 8 Finlux 1 0556, 1003 7, 10714, 10715, 1124 8, 11667 Firstline 10556, 10037, 1.
Remote Co ntrol Codes 13 Luma 11037 Lumatron 1 0037, 1066 8 Lumenio 10037 Lux May 10037 Luxor 11037, 1 0208 LXI 10178 M Electronic 10037, 10714, 106 34, 10195, 1051 2, 11652 Madison 10037 Magnavox 101.
Remote Co ntrol Codes 14 Profitronic 10037 Proline 10037, 10625, 10634, 11037 Prosonic 10037, 10714, 106 68, 11324, 1158 5, 11667, 11709, 1200 1 Protech 10037, 1066 8, 11037 Proton 10178 ProVision 105.
Remote Co ntrol Codes 15 Telefunken 10037, 1 0625, 10714, 10560, 1069 8, 11585, 11667 Telefusion 10037 Telegazi 10037 Telemeister 10037 Telesonic 10037 Telestar 10556, 10037 Teletech 10037, 1066 8, 11.
Remote Co ntrol Codes 16 Aristona 30539, 30646 ASDA 32213 Audix 30713 Autovox 30713 Awa 32587 Basic Li ne 30713 Bel Canto Design 3 1571 Black Diamond 30713 Blue Parade 30571 Blue Sky 30713 Brandt 3050.
Remote Co ntrol Codes 17 SEG 30713 Semp 30503 Sharp 30630, 30675, 30713, 32250, 3247 4, 32652, 32869 Sherwood 30741, 33052 Shinsonic 30533 Silva Schneider 30741 SilverCrest 31152 Skantic 30539, 30713 .
Remote Co ntrol Codes 18 Centrum 1103 7, 30713 Crown 11037, 30713 DMTech 12001 Dual 11037, 3 0713 Dynex 12049 Elfunk 11037, 30713 Emerson 11394, 11864, 118 86, 30675 Ferguson 11037, 3071 3 Goodmans 1 .
Remote Co ntrol Codes 19 Memo.
SN 29401471CODE Y1212-1 (C) Copyright 2013 Onkyo Corporation Japan. All rights reser ved. *29401471CODE*.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Onkyo TXNR525 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Onkyo TXNR525 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Onkyo TXNR525 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Onkyo TXNR525 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Onkyo TXNR525, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Onkyo TXNR525.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Onkyo TXNR525. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Onkyo TXNR525 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
