Manuale d’uso / di manutenzione del prodotto TX-NR900 del fabbricante Onkyo
Vai alla pagina of 84
E Contents Thank you for purchasing the Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.
2 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.
3 ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC – NATIONAL ELECTRICAL CODE ELECTRIC SERVICE EQUIPMENT GROUND CLAMP ANTENNA LEAD IN WIRE S2898A 1.
4 Contents Before using Important Safeguards ......................................... 2 Precautions ......................................................... 3 Contents .............................................................. 4 Features .......
5 Contents Declaration of Conformity We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY GROEBENZELL, GERMANY ONKYO EUROPE ELECTRONICS GmbH I.
6 The following accessories may be available depending on the area which it was purchased. Conversion plug × 1 (Use this plug if the power cord plug of the TX-NR900/900E does not fit your AC outlet. Shape may vary depending on the area which it was purchased.
7 Setting the voltage selector (Worldwide models only) Worldwide models are equipped with a voltage selector so that you can set your TX-NR900 to conform with local power supplies. Be sure to set this switch to match the voltage of the power supply in your area before plugging in the unit.
8 Inde x par ts and facilities Here is an explanation of the controls and displays on the front panel of the TX-NR900E. The specifications for your model may differ due to regional requirements.
9 Index parts and facilities For further operational instructions, see the pages indicated in brackets [ ]. POWER switch (for all models other than USA and Canadian models) [30] Press to turn on and off the main power supply for the TX-NR900/ 900E. When the TX-NR900/900E is turned on with the POWER switch, the STANDBY indicator lights.
10 Index parts and facilities MEMORY button [37] Press to assign the radio station that you are currently tuned to a preset channel or press to delete a previously preset station. FM MODE button [36] Press to change the stereo mode from AUTO to MONO and vice versa.
11 Front panel display Index parts and facilities Input signal path indicators Shows from which terminal the input signal is coming. Listening mode or digital input format indicators One of these indicators lights to show the format of the current input source.
12 Index parts and facilities Remote controller The RC-511M is a multi-functional remote controller. The instructions given here only explain how to use the remote controller in conjunction with the TX-NR900/900E.
13 Index parts and facilities SEND/LEARN indicator [7] Lights red when signals are sent by the remote controller. It also flashes when a button is pressed when the battery power is low. ON/STANDBY button [30, 43] ON: Press to turn on the TX-NR900/900E.
14 Index parts and facilities Rear panels Other than USA and Canadian models ETHERNET [NET -TUNE] SURR BACK/ ZONE 2 SPEAKERS AUDIO VIDEO S VIDEO MONITOR OUT IN IN IN IN IN ZONE 2 DVD VIDEO 1 VIDEO 2 V.
15 Index parts and facilities For more information regarding connection procedures, see pages indicated in brackets [ ]. DIGITAL INPUT/OUTPUT [17-21] These jacks are for connecting components with digital input and output capabilities.
16 Connecting to A udio/Video equipment • Be sure to always refer to the instructions that came with the component that you are connecting. • Do not plug in the power cord until all connections have been properly made.
17 Connecting to Audio/Video equipment Here is an explanation of typical ways to connect various components to the TX-NR900/900E. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation.
18 Connecting to Audio/Video equipment PR FRONT SUB SURR R GND SURR BACK / ZONE 2 R FRONT SUB SURR SURR BACK R R DIGIT AL INPUT DIGITAL OUTPUT OPT OPT 2 1 2 3 4 1 2 1 3 COAX AUDIO VIDEO S VIDEO MONITO.
19 PRE FRONT SUB SURR R GND SURR BACK / ZONE 2 R FRONT SUB SURR SURR BACK R R DIGIT AL INPUT DIGITAL OUTPUT OPT OPT 2 1 2 3 4 1 2 1 3 COAX AUDIO VIDEO S VIDEO MONITOR OUT IN IN IN IN IN ZONE 2 DVD VID.
20 Connecting to Audio/Video equipment 7. Connecting a DVD recorder or other digital video recording device (VIDEO 2) Using RCA video cables, connect the video output jack (composite) of the device to the VIDEO 2 VIDEO IN jack of the TX-NR900/ 900E and connect the video input jack of the device to the VIDEO 2 VIDEO OUT jack of the TX-NR900/900E.
21 N S VIDEO AUDIO VIDEO L R DIGIT AL VIDEO 5 INPUT R L Connecting to Audio/Video equipment S Video output Digital output (optical) 10. Video camera/ Video game (VIDEO 5 INPUT) Video output Analog output 8, 9.
22 Surround back speakers • Place these speakers so that their height is 3 feet (1 meter) higher than that of the listener ’ s ears. • When using surround back left and right speakers, place the.
23 Connecting speakers After determining the layout of your speaker system, it is now necessary to connect the speakers correctly to your TX-NR900/900E.
24 To use the tuner of TX-NR900/900E, it is necessary to prepare the supplied FM and AM antennas. • Adjustment and placement of the FM and AM antennas for better reception must be done while listening to a station broadcast. • If better reception cannot be obtained, then placement of an outside antenna is recommended.
25 Directional linkage Do not use the same antenna for both FM and TV (or VCR) reception since the FM and TV (or VCR) signals can interfere with each other.
26 When using the SURR BACK/ZONE 2 SPEAKERS terminals If you are using a 5.1-channel speaker system in the main room, you can connect the speakers for the remote zone (Zone 2) to the open SURR BACK/ZONE 2 SPEAKERS terminals.
27 Make the connection as shown below. Do not plug in any equipment to the power outlet until all the connections are complete. If the remote controller signal does not reach other components In this situation, you will need to use a commercially available IR emitter.
28 Connecting the power cords from other devices The TX-NR900/900E is equipped with AC mains outlets for connecting the power cords from other devices so that their power is supplied through the TX-NR900/900E.
29 Connecting auxiliary power amplifier These jacks are for connecting auxiliary power amplifier. You can use an auxiliary power amplifiers to listen at louder volumes than you can with the TX-NR900/900E alone. When using a power amplifier, connect each speaker to the power amplifier.
30 Turning on the power from the remote controller Before you can use the remote controller, you must perform steps 1 and 2 above and place the TX-NR900/900E in the standby state. 1. Press the RCVR MODE button. The RCVR MODE button lights. 2. Press the ON button to turn on the TX-NR900/900E (take it out of the standby state).
31 Adjusting the main volume adjusts the volume level of all the speakers connected to the TX-NR900/900E together. If headphones are connected, this also adjusts the volume heard from the headphone speakers. To adjust the volume, either press the VOL buttons on the remote controller or turn the MASTER VOLUME dial.
32 Listening with headphones To listen with headphones, plug a pair of headphones with a standard stereo plug into the PHONES jack on the TX-NR900/900E front panel. When you connect headphones, no sound will be heard from the speakers. When the headphones are unplugged, the TX-NR900/900E returns to its original listening mode.
33 Changing the listening mode To change the listening mode during playback, press the listening mode buttons. The functions of the buttons on the TX-NR900/900E and those on the remote controller are the same. For more information on each listening mode, see pages 56 and 57.
34 Adjusting the brightness of the front display You can adjust the brightness of the front display of the TX-NR900/ 900E using the DIMMER button on the remote controller or on the TX-NR900/900E front panel (other than European models).
35 3. Turn on the connected component and start playing the desired media. 4. If necessary, adjust the output level of each speaker as desired (see page 34). Adjust the volume at each speaker so that all the volumes sound at the same level at the listening position.
36 Listening to a stereo radio station (FM mode) When you tune into a radio station, TUNED i ndicator appears in the display. If you tune into an FM station in stereo, then “ FM STEREO ” appears. If the signal is weak, it may be impossible to tune into the station in stereo.
37 Selecting a preset radio station 1. Press TUNER input source button on the TX-NR900/900E or TUN button on the remote controller. The front display should show the currently selected frequency. 2. Press the PRESET / buttons and select the number of the desired preset station.
38 Listening to RDS br oadcasts (European models only) Listening to RDS broadcasts RDS reception is available only on the European model and only in areas where RDS broadcasts are available. What is RDS? RDS stands for Radio Data System and is a type of FM broadcasting.
39 4. Press the ENTER button. The TX-NR900E will scan until it reaches a station of the program type you selected. It will then stop briefly at that station before continuing on until it reaches the next station. Pressing the ENTER button stops the PTY scan at that point.
40 To record the input source signal you are currently watching or listening to This method outputs to the audio and video outputs the currently selected input source signal. This method allows you to a signal while you are actually listening to or watching it.
41 Recording the video from one source and the audio from another You can add the sound from one source to the video of another source to make your own video recordings.
42 STANDBY/ON STANDBY DVD ZONE 2 () GRN REC () RED AUDIO SELECTOR PURE AUDIO UPSAMPLING OFF ON POWER MASTER VOLUME TUNER PHONO NET AUDIO C D TAPE VIDEO 3 VIDEO 5 VIDEO 4 VIDEO 2 VIDEO 1 VCR 2 VCR 1 DI.
43 Adjusting the volume for the remote zone When the remote zone (Zone 2) speakers are connected to the SURR BACK/ZONE 2 SPEAKERS terminals, or to an amplifier connected to the SURR BACK/ZONE 2 PRE OUT terminals, adjust the volume as shown below. Using the front panel: Press the ZONE 2 LEVEL / buttons on the front panel.
44 Refer to the TX-NR900/900E “ How to use Net-Audio ” instruction manual, a separate volume, for description of the network- related settings. 5.Network Setup 1.IP Address 2.Proxy Setup 3.MAC Address 4.Client 5.Update Utility |ENTER|Quit:|SETUP| 4.
45 Button on remote controller Button on TX-NR900/900E SETUP (upper edge of ENTER button) (lower edge of ENTER button) (left edge of ENTER button) (right edge of ENTER button) ENTER RETURN SETUP UP DOWN LEFT RIGHT ENTER RETURN Advanced Menu 0.Hardware Setup 1.
46 0. Hardware Setup Menu The settings within the Hardware Setup Menu will need to be made before you use your TX-NR900/900E for the first time. Once you have selected one of the Hardware Setup menu items, the setting will not be displayed again when you enter the Basic Menu.
47 Use this sub-menu when you have a remote control sensor connected to the IR IN terminal. The setting in this sub-menu tells the TX- NR900/900E whether the remote control sensor is being used for operation of the TX-NR900/900E in the main zone or the remote zone (Zone 2).
48 1. Speaker Setup Menu After you have installed the TX-NR900/900E, connected all the components, and determined the speaker layout, it is now time to perform the settings in the Speaker Setup Menu for the optimum sound acoustics for your environment and speaker layout.
49 a. Unit feet: Select if you will enter the distances in feet. meters: Select if you will enter the distances in meters. b. Front L/R Set the distance from the front left and right speakers to your normal listening position. This can be set between 1 and 30 feet in 0.
50 1-3. Level Calibration Sub-menu Use this sub-menu to set the volume for each speaker so that each volume is heard by the listener at the same level. This is especially important for speaker layouts where the left and right speakers are at different distances or in asymmetrical positions due to room designs and configurations.
51 Input Setup 2. Input Setup Menu This menu allows you to make the various settings concerning the signals input from the various input sources that you use with the TX-NR900/900E.
52 Advanced Menu 2.Input Setup 2-2.Multichannel Setup a.Multichannel :Yes Quit:|SETUP| Input:DVD Input:DVD Input Setup b. Digital Format Sets the digital signal type to which priority is given during signal detection at the selected digital terminal. The default setting is “ All.
53 2-3. Video Setup Sub-menu a. Video This setting allows you to match the audio from one component with the video from another. Therefore, you can set a video source to be displayed while the audio from another input source is heard.
54 2-6. Listening Mode Preset Sub-menu With the TX-NR900/900E, you can set a different listening mode for each different signal type that comes from each input source.
55 Input Setup Relationship between input source and listening mode Listening modes marked with the “ ● ” can be selected. For columns that list a number of listening modes, the display will correspond to the format of the signal from the source media.
56 Input Setup Input source signals a. Analog/PCM Analog sources consist of LP records, FM and AM broadcasts, cassette tapes, and the such. PCM (Pulse Code Modulation) is one form of digital audio signals and is recorded directly onto compact discs and DVDs without compression.
57 Input Setup Dolby D (Dolby Digital) This mode is used for playing Dolby Digital sources. • Dolby Digital EX Enabled when playing back sources with surround tracks that were encoded using the Surround EX technology. • Dolby EX Select to achieve the same effects as Dolby Digital EX encoded sources with non-Dolby Digital sources.
58 A udio Adjust 3. Audio Adjust Menu Set the various parameters for the sound signals. Advanced Menu 3.Audio Adjust 1.Tone Control 2.Surround Speakers 3.Sound Effect 4.Delay 5.LFE Level 6.Mono 7.Theater-Dimensional 8.Surround Advanced Menu 3.Audio Adjust 9.
59 Audio Adjust 3-3. Sound Effect Sub-menu This sub-menu is used to turn on and off the various sound effects available with the TX-NR900/900E. Setting Values Initial value a. Re-EQ On, Off Off b. Upsampling On, Off Off c. Subwoofer On, Off On (Analog/PCM) d.
60 Audio Adjust Front left speaker Front right speaker Listening angle 3-5. LFE Level Sub-menu This sub-menu is for setting the LFE (Low Frequency Effect) levels included in Dolby Digital and DTS software. Setting Values Initial value a. Dolby Digital – ∞ , – 10 dB to 0 dB 0 dB b.
61 Audio Adjust 3-8. Surround Sub-menu This sub-menu provides various settings for modifying the plain Dolby Digital, DTS, and Pro Logic II Surround listening modes. The settings that can be set are shown in the table below. Setting Values Initial value a.
62 Audio Adjust 3-9. THX Sub-menu This sub-menu allows you to set the settings that will be enabled when the THX listening mode is selected. The settings available are shown in the table below. Setting Values Initial value a. Re-EQ (THX) Off, On On b.
63 Settings possible for each listening mode (3-1. 3-2. 3-3. Sub-menu) Setting 3-1. Tone Control 3-2. Surround Speakers 3-3. Sound Effect a. Bass a. Surround Speakers a.
64 4-1. Volume Setup Sub-menu This sub-menu allows you to make various settings concerning the volume control of the TX-NR900/900E. a. Volume Display You can choose from two ways of displaying the volume setting on screen. Absolute: This displays the volume with a minimum of 0 for no sound and a maximum of 100.
65 c. Immediate Display On: Select to have the screen immediately display certain operations as you perform them (e.g., having the input source displayed whenever an input source selector button is pressed). The display will remain for five seconds after the operation is completed.
66 Using remote contr oller Overview The RC-511M remote controller is a useful tool that can not only operate the TX-NR900/900E, but also all the other components of your home theater as well. To operate any component, first press the Mode button on the remote controller that corresponds to the component that you wish to control.
67 DVD MODE SETUP ON STANDBY TOP MENU DISC ENTER, RETURN AUDIO SEL ANGLE VOL MUTING MENU SUBTITLE SEARCH Using remote controller Controlling an Onkyo DVD player The connector of the Onkyo DVD player must be connected to the TX-NR900/900E (see page 28).
68 CD MODE MUTING ON STANDBY DISC VOL Controlling an Onkyo CD player The connector of the Onkyo compact disc player must be connected to the TX-NR900/900E (see page 28). 1. Press the CD MODE button. The CD MODE button lights. 2. Press the desired operation button.
69 Using remote controller SAT/MD MODE ON STANDBY VOL MUTING ENTER MD operation buttons Numeric keys Controlling an Onkyo MD recorder The connector of the Onkyo MD recorder must be connected to the TX-NR900/900E (see page 28). 1. Press the SAT/MD MODE button.
70 The remote controller has three learning functions. One is entering the pre-programmed code for a remote controller of another manufacturer. Another is the normal learning function that enables the remote controller to learn the codes directly from other remote controllers (see page 74).
71 Pre-programming codes Note: If more than one code is given in the table, try each code one by one until you reach the code that works (i.e. if the first code does not work, then try the next).
72 ON STANDBY CABLE MODE CH VOL MUTING ENTER ON STANDBY SAT / MD MODE CH ENTER, VOL MUTING MENU ENTER Operating y our pr ogrammed remote contr oller Numeric keys Numeric keys After entering a pre-programming by following the procedure given above, the following modes become enabled for use.
73 ON STANDBY TV MODE CH VOL MUTING ENTER TV/VCR ON STANDBY VCR MODE CH VOL MUTING TV/VCR Operating your programmed remote controller Numeric keys Numeric keys Video cassette recorder operation buttons VCR MODE (VCR Mode) 1. Press the VCR MODE button.
74 MACRO 1 MACRO 2 LIGHT : ENTER Pr ogramming the commands of remote contr ollers f or other devices into the remote contr oller 2 to 6 inches (5 to 15 cm) Buttons that cannot be programmed.
75 Programming the commands of remote controllers for other devices into the remote controller 4. Press and hold down the button (that corresponds to the command you are programming) on the remote controller of the other device until the SEND/LEARN lamp on the remote controller flashes twice.
76 What is the macro function? A macro function enables you to program a series of button operations (up to 16) on the remote controller into a single button. The series of operations are then called a macro. For example, to play a compact disc player connected to the TX-NR900/900E normally, you must perform the following steps: 1.
77 ENTER MACRO 2 MACRO 1 MODE buttons Erasing a macro from the MACRO 1 (or 2) button 1. Press and hold down any one of the 8 MODE buttons, press the MACRO 1 (or 2) button, and then release both buttons. When you press the MODE button, it lights and the SEND/ LEARN indicator lights.
78 T r oubleshooting guide If a problem occurs while you are using the remote controller, first try to operate the controls on the front panel of the TX-NR900/900E to make sure that it is not due to a malfunction (or worn out batteries) in the remote controller.
79 Troubleshooting guide VIDEO and AUDIO Desired picture does not appear. • Improper connection. ➞ Check connections. Insert the plugs and connectors completely (see pages 16 to 29). • Video Setup Sub-menu settings are incorrect. ➞ Check settings at Setup Menu → Input Setup Menu → Video Setup Sub-menu (see page 53).
80 Troubleshooting guide If one of the messages shown below appears “ Not available with headphones use ” Operation not allowed because headphones are plugged into the TX- NR900/900E. “ Not available with Multichannel use ” Operation not allowed while the multi-channel output is being used.
81 Specifications AMPLIFIER SECTION Continuous average power output (FTC) All channels: 110 W per channel min. RMS at 8 Ω , 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 145 W min. RMS at 6 Ω , 2 channels driven from 1 kHz with no more than 0.
82 Memo.
83 Memo.
http://www.onky o.co.jp/ HOMEP AGE SN 29343409 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Onkyo TX-NR900 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Onkyo TX-NR900 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Onkyo TX-NR900 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Onkyo TX-NR900 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Onkyo TX-NR900, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Onkyo TX-NR900.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Onkyo TX-NR900. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Onkyo TX-NR900 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
