Manuale d’uso / di manutenzione del prodotto TX-NR616 del fabbricante Onkyo
Vai alla pagina of 144
E n AV RECEIVER TX-NR616 Instruction Manual Contents Safety Information and Introduction ............ 2 Table of Contents ............. .............. ........... ..... 6 Connections ....... .............. ........... .............. ... 12 Turning On & Basic Operati ons .
En-2 Safety Information and Introduction Important Safety Instructions 1. Read these instruct ions. 2. Keep these instructi ons. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this a pparatus near water. 6. Clean only with dry cloth. 7.
Safety Information and Introduction En-3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording copyrighted ma terial is illegal without the permission of the copyright holder. 2. AC Fuse —The AC fuse inside the unit is not user- serviceable.
Safety Information and Introduction En-4 For Canadian Models NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003. For models having a power co rd with a polarized plug: CAUTION: TO PREVENT ELECT RIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Safety Information and Introduction En-5 Supplied Accessories Make sure you have the following accessories: * In catalogs and on p ackaging, the letter at the end of the product name indicates the color. Specifi cations and opera tions are the same regardless of color.
Safety Information and Introduction En-6 Table of Contents Safety Information and Intro duction Important Safety Instructions ......................................2 Precautions ................................................................... 3 Supplied Accessories.
Safety Information and Introduction En-7 Features Amplifier • 100 Watts/Channel @ 8 ohms (FTC) • 160 Watts/Channel @ 6 ohms (IEC) • 175 Watts/Channel @ 6 ohms (JEITA) • Optimum Gain Volume Circ uitry • H.
Safety Information and Introduction En-8 Front & Rear Panels For detailed informat ion, se e the pages in parentheses. a 8 ON/STANDBY button ( 20 ) b ZONE 2 and ZONE 3 buttons ( 46 , 71 ) c Remote.
Safety Information and Introduction En-9 s For detailed informat ion, se e the pages in parentheses. a Z2 (Zone 2) indicator ( 71 ) b Z3 (Zone 3) indicator ( 71 ) c 3D indicator This lights when a 3 D input si gnal is detected .
Safety Information and Introduction En-10 a DIGITAL IN COAXIAL and OPTICAL jacks b COMPONENT VIDEO IN and OUT jacks c USB port d ETHERNET port e FM ANTENNA jack and AM ANTENNA terminal f HDMI IN and H.
Safety Information and Introduction En-11 Remote Controller For detailed informat ion, se e the pages in parentheses. a 8 RECEIVER button ( 20 ) b REMOTE MODE/INPUT SELECTOR buttons ( 23 ) c q / w / e.
En-12 Connections Connecting the AV Receiver Speaker Configuration The following table indicates the channels you should use depending on the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended for a really p owerful and solid bass.
Connections En-13 Attaching the Speake r Cable Label s The speaker terminal s are color-coded for identification purpose. The supplied speaker cable labe ls are also color-coded and you should attach them to th e positive (+) side of each speaker cable in accordance with the table above.
Connections En-14 Using Dipole Speakers You can use dipole speakers for the surround and surround back speakers. Dipole speakers output the same sound in two directions. Dipole speakers typica lly have an arrow printed on them to indicate how they should be positioned.
Connections En-15 Connecting AV components a • Before making any AV connections, read the manuals supplied with your AV components. • Don’t connect the power cord until you’ve completed and double-checked all AV connections. • Push plugs in all the way to make good connections (l oose connections can cause noise or malfunctions).
Connections En-16 * If your TV doesn’t suppo rt Audi o Return Channe l (ARC), you need to connect an optical digita l cable toge ther with the HDMI cable to the AV receiver.
Connections En-17 Connect your components to th e appropriate jacks. The default input assignments are shown below. See “Connection Tips and Vide o Signal Path” for more information ( ➔ page 89 ). ✔ : Assignment can be changed ( ➔ page 53 ).
Connections En-18 With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connected via u , while the AV receiver is on standby, the AV receiver will automa tically turn on and select that component as the input source.
Connections En-19 This section explains how to connect the s upplied indoor FM antenna and AM loop antenna. The AV receiver won’t pick up any radio signals without any antenna connected, so you must c onnect the antenna to use the tuner.
En-20 Turning On & Basic Operations Turning On/Off the AV Receiver Tip •T h e HYBRID STANDBY indicator may light depending on the status of settings ( ➔ pa ge 51 ). • For details on power management settings, see “Auto Standby” ( ➔ page 67 ).
Turning On & Basic Operations En-21 Initial Setup This section explains the se ttings that we recommend you to make before using the AV receiver for the very first time. A setup wizard is launc hed upon first-time use to let you perform those settings.
Turning On & Basic Operations En-22 This step checks the connection of source components. W ith this step, you can enter remote control codes for the components you want to operate. This step checks yo ur network connection. This step ends the initial setup proc ess.
Turning On & Basic Operations En-23 Playback ■ Operating with the remote controller ■ Operating on the AV receiver The on-screen menus app ear only on a TV that is connected to HDMI OUT MAIN . If your TV is connected to other vid eo outputs, use the AV receiver’s disp lay wh en changing settings.
Turning On & Basic Operations En-24 Tip • See “Controlling Other Components” about the operation of other components ( ➔ page 74 ). Note • The buttons you can use will diff er depending on the devices and media used for playback. Controlling Contents of USB or Network Devices d k j m b a c f g l n o q h i p e Press USB or NET first.
Turning On & Basic Operations En-25 This section describes ic ons that appear on the AV receiver’s display during media playback. This section explains how to play music/video files on the iPod/iPhone.
Turning On & Basic Operations En-26 Extended Mode (Music) Cont rol The music content informati on is displayed (lists are displayed), and you can control the music content while looking at the screen. Top screen list: Playlists, Artists, Albums, Genres, Songs, Composers, Shuffle Songs, Now Playing.
Turning On & Basic Operations En-27 The vTuner Internet Radio Serv ice is a portal site featuring radio stations from all over the world. You can search for stations by categories such as genre or location. The AV receiver is preinstalle d with this service.
Turning On & Basic Operations En-28 Internet radio URLs in the following forma ts are supported: PLS, M3U, a nd podcast (RSS). However, depending on the type of data or audio format used by the Internet radio station, you may no t be able to listen to some stations.
Turning On & Basic Operations En-29 This section explains how to play music files on a computer or media server th rough the AV receiver (Server Playback). Windows Media Playe r 11 Setup This section explains how to configure Windows Media Player 11 so th at the AV receiver c an play the music files stored on your computer.
Turning On & Basic Operations En-30 Remote Playback means you can play the music files stored on a media server or personal computer with the AV receiver by operating the controller device in the home network.
Turning On & Basic Operations En-31 Using the Tuner With the built-in tuner you can enjoy AM and FM radio stations. You can store your favor ite stations as presets for quick selection.
Turning On & Basic Operations En-32 Presetting AM/FM Stati ons You can store a combination of up to 40 of your favorite AM/FM radio stati ons as presets. ■ Selecting Presets ■ Deleting Presets Using RDS (excluding North American and Taiwanese models ) When tuned into an RDS station, the RDS indicator lights.
Turning On & Basic Operations En-33 Note • In some cases, the text characters displayed on the AV receiver may not be identical to those b roadcast by the radio station. Also, unexpected characters may be displaye d when unsupported characters are received.
Turning On & Basic Operations En-34 Using Basic Functions With the supplied calibra ted microphone, Audyssey 2EQ ® automatically det ermines the number of speakers connected, their si ze for purposes of bass management, optimum crossover frequencie s to the subwoofer (if present), and distances from the primary listening position.
Turning On & Basic Operations En-35 Note • You can cancel Audyssey 2EQ Room Correction and Speaker Setup at any point in this procedure simply by dis connecting the setup microphone. • Do not connec t or disconnect a ny speakers during Audyssey 2EQ Room Correction and Speaker Setu p.
Turning On & Basic Operations En-36 Error Messages While Audyssey 2EQ ® Room Correction and Speaker Setup is in progress, one of the error messages below may appear. The opti ons are: ` Retry : Try again. ` Cancel : Cancel Audyssey 2EQ Room Correction and Speaker Setup.
Turning On & Basic Operations En-37 Selecting Listening Modes See “About Listening Modes” for deta iled information about the li st ening modes ( ➔ page 38 ). ■ Listening Mode Buttons MOVIE/TV button This button selects the list ening modes intended for use with movies and TV.
Turning On & Basic Operations En-38 About Listenin g Modes The AV receiver’s listening modes can transform your listening room into a movie th eater or concert hall, with high fidelity and stunning surround sound.
Turning On & Basic Operations En-39 ■ Onkyo-Original DSP Listening Modes Listeni ng Mode Description Input Source Speaker Layout Orchestra Suitable for classical or operatic music, this mode emphasizes the sur round channels in order to widen the stereo image, and simulates the natural reverberation of a large hall.
Turning On & Basic Operations En-40 ■ Listening Modes Listeni ng Mode Description Input Source Speaker Layout Pure Au dio *1*2 In this mode, the display and video circuitry are turned off, minim izing possible noise sources for the ulti mate in high-fidelity audio reproductio n.
Turning On & Basic Operations En-41 Dolby Pro Logic IIx *8 Dolby Pro Logic II Dolby Pro Logic IIx expands any 2-channel source for 7.1-channel playback. It prov ides a very natural and seamless surround- sound experience that fully envelops the listener.
Turning On & Basic Operations En-42 THX Founded by Geor ge Lucas, THX develops stringent standards that ensure movies are reproduced in movie theaters and home theaters just as the di rector intended. THX Modes carefully optimize the tonal and spatial characteristics of the soundtrack f or reproduction in the home- theater environment.
Turning On & Basic Operations En-43 Note *1 (North American and Taiwanese models) This listening mode is not available. *2 Pure Audio cannot be selected when Z one 2/3 is active. Besides, if you activate Zone 2/3 while Pure Audio i s selected, the listening mode will automatically switch to Direct.
Turning On & Basic Operations En-44 The Home menu provides quick access to frequently used menus. ■ Network Service ` With this selection, you ca n use various Internet radio services or play the contents stored in media connected to your home network (DLNA) ( ➔ pages 27 to 30 ) .
Turning On & Basic Operations En-45 With the sleep timer, you can set the AV receiver to turn off automatically aft er a specified period. You can adjust the brightness of the AV receiver’s display, and switch the MASTER VOLUME indicator off and on in conjunction.
Turning On & Basic Operations En-46 The Whole House Mode is us ef ul when you want to add extra background music to your home party; this allows you to enjoy the same stereo music as the main room in separate rooms (Zone 2/3). The Whole House Mode selects the same input source for Multi Zone as the main room’s.
En-47 Advanced Operations On-screen Setup With the AV receiver connected to a TV, there are two ways of changing the settings on-screen: using the Quick Setup or the Setup Menu ( HOME ). ■ Quick Setup The Quick Setup provides quick access to frequently used settings.
Advanced Operations En-48 Note *1 • The video preview is not displayed when: – HDMI IN 5/6/7 is the current HDMI input source, or – No signal is present on the current input source.
Advanced Operations En-49 Audyssey ■ Audyssey See “Audyssey” in “Source Setup” ( ➔ page 59 ). ■ Dynamic EQ See “Dynamic EQ” in “So urce Setup” ( ➔ page 59 ). ■ Dynamic Volume See “Dynamic Volume” in “Source Setup” ( ➔ page 59 ).
Advanced Operations En-50 Note • This procedure can also be performed on the AV receiver by using SETUP , the cursor buttons, and ENTER . • During Audyss ey 2EQ ® Room Correction an d Speaker Setup, messages, etc., that are displayed on the TV screen will appear on the AV receiver’s displa y.
Advanced Operations En-51 By way of optimized circuitry, this fu nction reduces power consumption when the AV rece iver is in standby mode. The HYBRID STANDBY indicator will li ght in either of the following conditions: –“ HDMI Th rough ” is enabled (the HDMI indicator is off).
Advanced Operations En-52 Main Menu Input/Output Assi gn Monitor Out On the “ Monitor Out ” settings, you can se lect whether or not to hav e the video sour ces’ images output through the HDMI output.
Advanced Operations En-53 ■ BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, EXTRA1, EXTRA2 ` HDMI1 , HDMI2 , HDMI3 , HDMI4 , HDMI5 , HDMI6 , HDMI7 : Select the input to whic h the component has been connected. ` ----- : Output composite video and component video sources from the HDMI output.
Advanced Operations En-54 Main menu Speaker Setup Here you can check the setti ngs made by Audyssey 2EQ Room Correction and Speaker Se tup function, or set them manually, which is useful if you change one of the connected speakers after using Audyssey 2EQ Room Correction and Spea ker Setup function.
Advanced Operations En-55 ■ Surround Back Ch ` 1ch : Select if only one surround back speaker L is connected. ` 2ch : Select if two (left and right) surro und back speakers are connected. Note • If the “ Surround Back ” setting is set t o “ None ”, this setting cannot be selected.
Advanced Operations En-56 Equalizer Settings With the Equalizer settings, you can adjust the tone of speakers individually with a 5-band equalizer. The volume of each speaker ca n be set ( ➔ page 55 ). ■ Manual Equalizer ` On : You can adjust the equalizer for each speaker manually.
Advanced Operations En-57 Main menu Audio Adjust With the Audio Adjust func tions and sett ings, you can adjust the sound and list ening modes as you like. Multiplex/Mono ■ Multiplex Input Channel ` Main ` Sub ` Main/Sub This setting determines which channel of a stereo multiplex source is output.
Advanced Operations En-58 ■ PL IIz Height Gain ` Low ` Mid ` High The Height Gain Control in Dolby Pro Logic IIz enables the listener to select how muc h gain is applied to the front high speakers. There are three settings, “ Low ”, “ Mid ” and “ High ”, and the front high speakers are accentuated in that order.
Advanced Operations En-59 Main menu Source Setup Items can be set i ndividually for each input selector. Audyssey ■ Audyssey ` Off ` Movie : Select this setting for movie ma terial. The Audyssey indicator will light. ` Music : Select this setting for music materi al.
Advanced Operations En-60 IntelliVolume ■ IntelliVolume ` –12dB to 0dB to +12dB in 1 dB steps. With IntelliVolume, you can set the input level for each input selector in dividually. T his is useful if one of y our source components is louder o r quieter than the others.
Advanced Operations En-61 Tip • To name a radio preset, select AM or FM , and then select the preset ( ➔ page 32 ). • To restore a name to its de fault, erase all characters with CLR , select “ OK ” and then press ENTER . Note • This setting cannot be used for the NET and USB input selectors.
Advanced Operations En-62 ■ Film Mode *2*4 ` Video : “ Film Mode ” detect ion is not a pplied and the input signal is handled as a video source. ` Auto : Detects whether the input signal is a video or a movie. If it is a movie, th e approp riate conversion is applied.
Advanced Operations En-63 Setting the Incoming Digital Sign al (Fixed Mode) ■ Fixed Mode ` Off : The format is detected au tomatically. If no digita l input signal is present, the corresponding analog input is used instead. ` PCM : Only 2-channel PCM format input signals will be heard.
Advanced Operations En-64 ■ DTS/DTS-ES/DTS-HD With this setting, you can specify the listening mode used when DTS or DTS-HD High Resolution format digital audio signals are pl ayed (DVD, LD, CD, etc.). Specifies the default listeni ng mode for DTS-HD Master Audio sources, such as Blu-ray or HD DVD (input via HDMI).
Advanced Operations En-65 OSD Setup ■ On Screen Display ` On ` Off This preference determines whether operation details are displayed on-screen when an AV receiver function is adjusted. Even when “ On ” is selected, opera ti on details may not be output if the input source is connected to an HDMI IN .
Advanced Operations En-66 ■ HDMI Through ` Off ` BD/DVD , CBL/SAT , STB/DVR , GAME , PC , AUX , TV/CD , EXTRA1 , EXTRA2 : Selects the input source for which the HDMI Through function is enabled. ` Last : The HDMI Through function is activated on the input source selected at th e time of setting the AV receiver to standby mode.
Advanced Operations En-67 ■ LipSync ` Off ` On This function allows the AV receiv er to automatically correct any delay between the video and the audio, based on the data from the connected monitor. Note • This function works only if your HDMI-comp atible TV supports HDMI Lip Sync.
Advanced Operations En-68 Note • If you select “ Disable ”, you must conf igure the “ IP Address ”, “ Subnet Mask ”, “ Gate way ”, and “ DNS Server ” settings yourself. ■ IP Address ` Class A: “ 10.0.0.0 ” to “ 10.255.255.
Advanced Operations En-69 Main Menu Lock Setup With this preference, you can protect your settings by locking the setup menus. ■ Setup ` Locked ` Unlocked When “ Locked ” is selected, the setup menus will be locked and you cannot change any setting.
Advanced Operations En-70 Multi Zone In addition to the main liste ning room, you can also enjoy playback in the other room, or as we call Multi Zone. And, you can select a different source for each room. There are two ways you ca n connect Zone speakers: 1.
Advanced Operations En-71 ■ Operating on the AV receiver ■ Operating on the remote controller To control Zone 2/3, you must press ZONE2 or ZONE3 on the remote controller first.
En-72 Controlling Other Components iPod/iPhone Playback via Onkyo Dock RI Dock With the RI Dock, you can easily play the music of your iPod/iPhone, or watch the slid eshows and videos of your iPod/iPhone on a TV.
Controlling Other Components En-73 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control your iPod/iPhone in the Dock with the buttons described further in this section. See “Entering Remote Control Codes” for details on entering a remote control code ( ➔ page 75 ).
Controlling Other Components En-74 Controlling Other Components You can use the AV receiver’s remot e controller to cont rol your other AV components. This section explains how to enter the remote control code for a component that you want to control : DVD, TV, CD, etc.
Controlling Other Components En-75 You’ll need to enter a code for each component that you want to control. Note • Though the prov ided remote cont rol codes are correct at the time of release, they are subject to change. You can change the configuration of colored b uttons, with which REMOTE MODE buttons are preset.
Controlling Other Components En-76 Onkyo components that are connected via u are controlled by pointing the re mote controller at the AV receiver, not the component.
Controlling Other Components En-77 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your component, you can control your component as described below. For details on ente ring a remo te control code for other components, see “Entering Remote Control Codes” ( ➔ page 75 ).
Controlling Other Components En-78 ■ DVD player / DVD recorder operation ■ VCR/PVR operation ■ Cassette tape deck operation ■ Satellite receiver / Cable receiver operation ■ CD player / CD recorde r / MD recorder operation Note • With some components, certain buttons may not work as expected, and some may not work at all.
En-79 Appendix Troubleshooting If you have any trouble using th e AV receiver, look for a solution in this section. If you can’t resolve the issue yourself, contact your Onkyo dealer.
Appendix En-80 ■ Only the front speakers produce sound ■ Only the center sp eaker produces sound ■ The surround speakers produce no sound ■ The center speaker produces no sound ■ The front h.
Appendix En-81 ■ The beginning of audio received by an HDMI IN can’t be hea rd ■ There’s no sou nd during Whole Hou se Mode ■ There’s no picture ■ There’s no picture from a source conn.
Appendix En-82 ■ Can’t control oth er components ■ There’s no sound ■ There’s no video ■ The AV receiver’s remo te controller doesn’t control my iPod/iPhone ■ The AV receiver unexp.
Appendix En-83 ■ Can’t access the music files on a U SB device ■ Standby power cons umption ■ The sound changes wh en I connect my headphones ■ The speaker distance cann ot be set as require.
Appendix En-84 The AV receiver can upconve rt component video and composite video sources for di splay on a TV connected to the HDMI output(s). However, if the picture quality of the source is poor, upconversion ma y make the picture worse or disappear altogether.
Appendix En-85 Firmware Update To update the firmware of the AV receiver, you can choose from the following two methods: update via network, or update via USB storage. Choose the one that best suits your environment. Before pr oceeding with the update, please read the correspondi ng explanations carefully.
Appendix En-86 Update Procedure Troubleshooting Case 1: If “ No Update ” is displayed on the AV receiver’s display, it means that the firmware has already been updated. You do not need to do anything further. Case 2: If an error occurs, “ Error!! *-** ” is displayed on the AV receiver’s display.
Appendix En-87 The AV receiver allows you to update the firmware using a USB device. Note • Never unplug or turn off the AV receiver duri ng the update process.
Appendix En-88 Troubleshooting Case 1: If “ No Update ” is displayed on the AV receiver’s display, it means that the firmware has already been updated. You do not need to do anything further. Case 2: If an error occurs, “ Error!! *-** ” is displayed on the AV receiver’s display.
Appendix En-89 Connection Tips and Video Signal Path The AV receiver supports seve ral connection formats for compatibility with a wi de ra nge of AV equipment. The format you choose will depe nd on the formats supported by your components. Use the foll owing sections as a guide.
Appendix En-90 ■ Signal Selection If signals are present at more than one input, the inputs will be selected automatically in t h e following order of priority: HDMI, component vide o, composite video.
Appendix En-91 The following tables show how vide o signals at differe nt resolutions are output by the AV receiver. NTSC/PAL ✔ : Output available s *1 Supported resolutions: [3840 × 216 0 24/25/30 Hz], [4096 × 2160 24 Hz] *2 Supported resolutions for HDMI OUT SU B .
Appendix En-92 Using an RIHD- compatible TV, Player, or Recorder p , which stands for Re mote Interactiv e over HDMI, is the name of the system control function found on Onkyo components. The AV rece iver can be used with CEC (Consumer Elec tronics Control), which allows system control over HDMI and is part of the HDMI standard.
Appendix En-93 ■ How to connect and setup 1 Confirm the connection and s ettings. 1. Connect the HDMI OUT MAIN jack to the HDMI input jack of the TV. 2. Connect the audio output from the TV to the OPTICAL IN 2 jack of the AV receiver using an optical digital cable.
Appendix En-94 About HDMI Designed to meet the increa sed demands of di gital TV, HDMI (High Definition Multimedia Interfac e) is a new digital interface standard fo r co nnecting TVs, projectors, Blu-ray Disc/DVD players, se t-top boxes, and other video components.
Appendix En-95 Network/USB Features The following diagram shows how you can connect the AV receiver to your home network. In this example, it’s connected to a LAN port on a router, which has a 4-port 100Base-TX switch built-in. ■ Ethernet Networ k For the best results, a 100B ase-TX switched Ethernet network is recommended.
Appendix En-96 ■ Server playback The AV receiver ca n play digital music files stored on a computer or media server and supports the following technologies: • Windows Media Player 11 • Windows Media Player 12 • Windows Media Connect 2.
Appendix En-97 For server playback and pla yback from a USB device, the AV receiver supports the fo llowing music file formats. Variable bit-rate (VBR) file s are supported. However, playback times may not display correctly. Note • With remote playback, the AV receiver does not support the following music file formats: FLAC and Ogg Vorbis.
Appendix En-98 License and Trademark Information “x.v.Color” is a trademark of Sony Corporation. Manufactured under license und er U.S. Patent Nos: 5,956,674; 5,974,380; 6, 226,616; 6,487 ,535; 7,212, 872; 7,333,929 ; 7,392,195; 7,272,567 & other U.
Appendix En-99 Specifications Amplifie r Section Video Section Tuner Section General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audio Inputs ■ Audio Outputs ■ Others Specifications and featu res are subject to change without notice.
2-1, Nisshin-cho , Ney aga wa-shi, OSAKA 572-8540, J AP AN T el: 072-831-8023 F ax: 072-831-8163 http://www .onkyo .com/ 18 P ark W a y , Upper Saddle River , N.J . 07458, U.S .A. T el: 800-229-1687, 201-785-2600 F ax: 201-785-2650 http://www .us.onkyo .
Using Internet Radio En-1 Using Internet Radio Note • Available services may vary depending on the r egion. Common Procedures in Internet Radio Menu 1 Press NET . A list of the network serv ices appears, and the NET indicator lights. If it flashe s, verify that the Ethernet cable is firmly connected to the AV receiver.
Using Internet Radio En-2 Pandora is a free, personalized Internet radio service that plays the music you know and helps you discover music you’ll love. PANDORA, the PANDORA logo, and the Pandora trade dress are trademarks or regi stered trademarks of Pandora Media, Inc.
Using Internet Radio En-3 Using Rhapsody (U.S. only) 1 Use q / w to select “Sign in to your account” and then press ENTER . To use Rhapsody, you need an acco unt. If you don’t have one yet, you can create a new account at www.rhapsody.com/onkyo If you have an existing Rhapsody account, select “ Sign in to your account ” and press ENTER .
Using Internet Radio En-4 Your Onkyo AV receiver includes a free trial of SiriusXM Internet Radio. The “Account Info” screen shows how many days are left in your trial. After the trial period expires, if you want to conti nue listening to the service, you must subscribe.
Using Internet Radio En-5 Last.fm is a music s ervice th at learns what you love... Your new Onkyo AV receiver is very clever. If you have a free Last.
Using Internet Radio En-6 Using Slacker Personal Radio 1 If you do not have an ac count, create one on the Slacker website (www.sl acker.com) with your computer. If you already have a Slac ker account, se lect “Sign in to your account” and then press ENTER .
Utilisation d’une webradio Fr-1 Utilisation d’une webradio Remarque • Les services disponibles peuvent varier en fonction de la région. Procédures courantes dans le menu de webradio 1 Appuyez sur NET . Une liste des services réseau s’affiche, et le témoin NET s’allume.
Utilisation d’une webradio Fr-2 Pandora est un service de radio en ligne libre et personnalisé vous permettant de lire la musique que vous connaissez et de découvrir celle que vous aimez. PANDORA, le logo PANDOR A, et l’habillage commercial Pandora sont des marques commerciales ou des marques dépo sées de la société Pandora Media, Inc.
Utilisation d’une webradio Fr-3 Utilisation de Rhapsody (Etats-Unis uniquement) 1 Utilisez q / w pour sélec tionner « Sign in to your account », puis appuyez sur ENTER . Vous devez posséder un compte pour utiliser Rhapsody. Si vous ne di sposez pas encore d’un compte, vous pouvez en créer un à partir de www.
Utilisation d’une webradio Fr-4 Votre ampli-tuner AV Onkyo co mprend un essai gratuit de SiriusXM Internet Radio. L’ écran « Account Info » affiche le nombre de jours restants da ns votre essai. Une fois la période d’essai expirée, si vous souhaitez continuer à écouter le service, vous de vez vous abonner.
Utilisation d’une webradio Fr-5 Last.fm un service de musique qui appr end ce que vous aimez… Votre nouvel ampli-tuner AV O nkyo est très intelligent. Si vous avez un compte Last.fm gr atuit, il garde une trace de toutes les chansons que vous avez juste jouées.
Utilisation d’une webradio Fr-6 Utilisation de Slacker Personal Radio 1 Si vous ne possédez pas de compte, c réez-en un à partir du site Web de Slacker (www.slacker.com) à l’aide de votre ordinateur. Si vous possédez déjà un compte Slacker, sélectionnez « Sign in to your account », puis appuyez sur ENTER .
Uso de In ternet Radio Es-1 Uso de Internet Radio Nota • Los servicios disponibles pueden variar de una regió n a otra. Procedimientos comunes en el menú Internet Radio 1 Pulse NET . Aparecerá una lista de los servicios de red y se iluminará el indicador NET .
Uso de In ternet Radio Es-2 Pandora es un servicio de radi o por Internet gratuito y personalizado que reproduce la música que usted conoce y le ayudará a descubrir mú sica que le encantará. PANDORA, el logotipo de PANDORA logo, y la imagen corporativa de Pandora son ma rcas comer ciales o marcas comerciales registradas de Pandora Media, Inc.
Uso de In ternet Radio Es-3 Uso de Rhapsody (sólo EE.UU.) 1 Utilice q / w para sel eccionar “Sig n in to your account” y luego pulse ENTER . Para utilizar Rhapsod y, necesitará una cuenta . Si todavía no tiene una, puede crear una nueva en www.
Uso de In ternet Radio Es-4 Su receptor de AV Onkyo incl uye una prueba gratuita de SiriusXM Internet Radio. La pantalla “Account Info” muestra los días que quedan de la prueba. Una vez que termine el periodo de prueba, si desea seguir escuchando este servicio, deberá contrata rlo.
Uso de In ternet Radio Es-5 Last.fm es un servicio musica l que sabe lo que le gusta... Su nuevo receptor de AV O nkyo es muy inte ligente. Si tiene una cuenta gratuita de Last.fm, hará un seguimiento de todas las canciones que acaba de escuchar. Cuando visite el sitio web de Last.
Uso de In ternet Radio Es-6 Uso de Slacker Personal Radio 1 Si no tiene una cuenta, cree una en el sitio web de Slacker (www.slacker.co m) con su ordenador. Si ya tiene una cuenta d e Slacker, seleccione “Sign in to your account” y pulse ENTER . Aparecerá la pantal la de teclado.
Uso de In ternet Radio Es-7 Notas.
SN 29401189A (C) Copyright 2012 Onkyo Sound & Vision Cor poration Japan. All rights reser ved. Y1112-1 * 2 9 4 0 1 1 8 9 A *.
En-1 Using Internet Radio Using Internet Radio Note • Available services may vary depending on the r egion. Common Procedures in Internet Radio Menu 1 Press NET . A list of the network serv ices appears, and the NET indicator lights. If it flashe s, verify that the Ethernet cable is firmly connected to the AV receiver.
Using Internet Radio En-2 Last.fm is a music s ervice th at learns what you love... Your new Onkyo AV receiver is very clever. If you have a free Last.
Internetradio verwenden De-1 Internetradio verwenden Anmerkung • Die verfügbaren Dienste sind länderab hängig verschieden. Allgemeine Verfahren bei den Internetradio-Me nüs 1 Drücken Sie NET . Es erscheint eine Liste der Netzwerkdienste und die NET -Anzeige leucht et.
Internetradio verwenden Last.fm ist ein Musikdiens t, der sich Ihre Lieblingsmusik merkt... Ihr neuer Onkyo AV-Receiver ist äußer st clever. Wenn Sie ein kostenloses Last.fm-Konto ei ngerichtet haben, werden darin all e kürzlich abgespiel ten Titel gesp eichert.
Remote Co ntrol Codes 1 Remote Control Codes / 1 While holding d own the REMOTE MO DE bu tton to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/ Remote indicator lights. On Integra products, button names are ca pitalized.
Remote Co ntrol Codes 2 Codes de télécommande Códigos de control remoto 1 Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez associer un code, pressez et maintenez enfoncé le bou ton [DISPLAY] (pendant environ 3 secondes). Le bouton REMOTE MODE/le témoin Remote s’allume.
Remote Co ntrol Codes 3 Codici del telecomando Fernbedienungscodes 1 Tenendo premuto il tasto REMOTE MODE al quale si desid e ra assegnare il codice, premer e e tenere premut o [DISPLAY] (per circa 3 secon di). Il tasto REMOTE MODE/l'indi catore Remote si acce nde.
Remote Co ntrol Codes 4 Afstandsbedieningscod es Fjärrstyrningskoder 1 Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code wilt toewijzen de [DISPLAY] toet s ingedrukt (ongeveer 3 seconden). De toets REMOTE MODE (afstandsbed ieningsmodus) / Het indicatielampje afstandsbediening gaat branden.
Remote Co ntrol Codes 5 遙控代碼 遥控代码 1 在按住想指定編碼的 REMOTE MODE （遙控模式）按鈕時，同時按住 [DISPLAY] （顯示） （約 3 秒） 。 REMOTE MODE （遙控.
Remote Co ntrol Codes 6 Dedicated On kyo Receiver Default 62503 Zone 2 62506 Zone 3 62507 Cable Set T op Box ADB 02254, 02769 Aon 02769 Arris 02187 AT&T 00858 Bright House 01376, 01877 BT Vision 0.
Remote Co ntrol Codes 7 AT&T 00858 BT Vision 02294 Cisco 00858, 0234 5, 02378 Kreatel 01385 Motorola 00858, 0237 8 Neuf TV 03107 Philips 02294 Scientific Atlanta 00858 SFR 03107 Verizon 0237 8 CD .
Remote Co ntrol Codes 8 Polk Audio 82228 Video - Accessory ADB 02254, 02769 Aon 02769 Apple 02615 AT&T 00858 BT Vision 02294 Canal+ 02657 Cisco 00858, 0234 5, 02378 Kreatel 01385 mio TV 02802 Moto.
Remote Co ntrol Codes 9 Hama 01567 Hanseatic 01100 Hirschmann 00173 Hitachi 01284 Hornet 01300 HTS 00775 Humax 01377, 01176, 014 27, 01675, 0180 8, 01882, 01915, 0214 4, 02408, 02616 ID Digital 01176 .
Remote Co ntrol Codes 10 Star 00887 Stream System 01300 Strong 00853, 0 0879, 01284, 01300, 0140 9, 01626, 02418 Sunny 01300 Sunstar 00642 Supernova 00887 Supratech 01413 Systec 01334 Sytech 02418 TBo.
Remote Co ntrol Codes 11 Akai 10178, 10556, 10037, 10714, 1071 5, 10208, 11675 Akiba 10037 Akito 10037 Akura 10171, 1 0037, 10714, 10668, 1103 7, 11363, 11585, 1166 7, 11709 Alba 10037, 10714, 10668, .
Remote Co ntrol Codes 12 Erres 10037 ESA 10171 ESC 10037 Euroman 1003 7 Europa 10037 Europhon 1003 7 Evesham 11248, 1166 7 Excello 11037 Exquisit 10037 Ferguson 10037, 1062 5, 10560, 10195, 1103 7, 11.
Remote Co ntrol Codes 13 Lifetec 1003 7, 10714, 10668, 11037, 1200 1 Linsar 1158 5 Local India TV 10208 Local Malaysia TV 10698 Lodos 11037 Loewe 10037, 10512, 118 84 Logik 11037, 1069 8 Logix 1066 8 .
Remote Co ntrol Codes 14 Phoenix 10037 Phonola 10556, 10037 Pioneer 10037, 1 0698, 10512, 11457, 1163 6, 12171 Plantron 10037 Playsonic 10037, 1071 4, 10715, 11652 Powerpoint 1003 7, 10698 Prinston 11.
Remote Co ntrol Codes 15 Technosonic 10556, 1062 5, 10499, 11324 Techvision 11709 Techwood 11037, 11667 Tecnimagen 10556 Teco 10178, 10653 Tedelex 10208, 1170 9 Teknika 10150 TELE System 11585 Telecor.
Remote Co ntrol Codes 16 Technics 10556 Thomson 10625 DVD 3D LAB 30539 Accurian 30675 Acoustic Solutions 30713 AEG 30675 AFK 31152 Aiwa 30533 Akai 30675 Alba 30539, 30713 Ambiance 33052 Amstrad 30713 .
Remote Co ntrol Codes 17 Radionette 30741 Radiotone 3071 3 RCA 30522, 3057 1, 32213, 32587 REC 30490 Red 32213 Redstar 31394 Roadstar 30713 Rotel 30623 Salora 30741 Samsung 30490, 3057 3, 30199, 30820.
Remote Co ntrol Codes 18 Victor 31597 Yamaha 30646 Zenith 30741 HD-DVD Integra 3290 1, 33104 33 504 LG 30741 Microsoft 3208 3 Onkyo 3290 1, 33104 33 504 Xbox 32083 TV/DVD Combination Akai 11675 Black .
Remote Co ntrol Codes 19 Memo.
SN 29401094 (C) Copyright 2012 ONKY O SOUND & VISION CORPORA TION Japan. All rights reserved. * 2 9 4 0 1 0 9 4 * Y1112-1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Onkyo TX-NR616 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Onkyo TX-NR616 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Onkyo TX-NR616 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Onkyo TX-NR616 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Onkyo TX-NR616, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Onkyo TX-NR616.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Onkyo TX-NR616. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Onkyo TX-NR616 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
