Manuale d’uso / di manutenzione del prodotto HT-R510 del fabbricante Onkyo
Vai alla pagina of 48
AV Receiv er HT -R510 Instruction Manual Thank you for purchasing the Onkyo A V Recei ver . Please read this manual thoroughly before making con- nections and plugging in the unit. F ollo wing the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your ne w A V Recei ver .
2 Impor tant Safeguar ds 1. Read Instructions —All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions —The safety and operating instructions should be retained for future reference.
3 Important Safeguards— Continued 21. Replacement Parts —When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or ha ve the same characteristics as the orig- inal part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
4 Precautions— Continued 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted material is illeg al without the permission of the copyright holder . 2. AC Fuse —The A C fuse inside the HT -R510 is not user -service- able.
5 Bef ore Using the HT -R510 Notes: • The supplied batteries should last for about six months, although this will v ary with usage. • If the remote controller doesn’t w ork reliably , try replacing both batteries. • Don’t mix ne w and old batteries, or dif ferent types of bat- teries.
6 Contr ols & Connectors Front P anel For detailed information, refer to the pages in parenthesis. A ST ANDBY/ON button (24) This button is used to set the HT -R510 to On or Standby . For models with a PO WER switch, this button has no ef fect unless the PO WER switch is set to ON.
7 Controls & Connector s —Continued Display For detailed information, refer to the pages in parenthesis. 1 A & B speaker indicators (28, 32) Indicator A lights up when speaker set A is on. Indicator B lights up when speaker set B is on. 2 MUTING indicator (32) This indicator flashes when the HT -R510 is muted.
8 Controls & Connector s —Continued Rear P anel For detailed information, refer to the pages in parenthesis. A COMPONENT VIDEO (10, 12, 14, 16) These RCA/phono connectors can be used to connect a TV , D VD player , or other A V component with component video inputs and outputs.
9 Controls & Connector s —Continued RC-518M This page describes only those buttons that can be used to control the HT -R510 when the remote controller is in RCVR mode (Recei ver mode). The other modes, and information on using the remote controller to control your other A V compo- nents, are explained on page 41.
10 Connecting Y our A V Components • Read the manuals supplied with your A V components. • Don’t connect the po wer cord until you’ ve completed all audio and video connections.
11 Connecting Y our A V Components —Continued The HT -R510 offers se veral connection formats for compat- ibility with a wide range of A V equipment. The format you choose will depend on the formats supported by your A V components. Use the follo wing sections as a guide.
12 Connecting Y our A V Components —Continued ■ Using Composite Video Use a composite video cable to connect the HT -R510’ s VIDEO MONITOR OUT to a composite video input on your TV , as shown. ■ Using S-Video Use an S-V ideo cable to connect the HT -R510’ s S VIDEO MONITOR OUT to an S-V ideo input on your TV , as shown.
13 Connecting Y our A V Components —Continued A udio Connections ■ Using Coaxial or Optical Connections • Use a coaxial digital audio cable to connect the HT -R510’ s CO AXIAL DIGIT AL INPUT to the coaxial output on your D VD player , as sho wn.
14 Connecting Y our A V Components —Continued Video Connections • Use an S-V ideo cable to connect the HT -R510’ s S VIDEO VIDEO 2 IN to the S-V ideo output on your VCR, as sho wn.
15 Connecting Y our A V Components —Continued If your TV has A V outputs and you want to record from your TV to your VCR via the HT -R510, make the following con- nections.
16 Connecting Y our A V Components —Continued Video Connections ■ Using Composite Video Use a composite video cable to connect the HT -R510’ s VIDEO VIDEO 2 IN to the composite video output on your satellite/cable tuner , LD player , etc., as sho wn.
17 Connecting Y our A V Components —Continued ■ Using Optical or Coaxial Connections • Use an optical digital audio cable to connect the HT -R510’ s OPTICAL 1 DIGIT AL INPUT to the optical output on your CD player , as sho wn.
18 Connecting Y our A V Components —Continued ■ T urntable with an MC-type (Mo ving Coil) Car tridge Use an RCA/phono audio cable to connect the HT -R510’ s L/ R T APE IN connectors to the audio outputs on your phono preamp. Use another RCA/phono audio cable to connect the phono preamp’ s inputs to your MC head amp’ s outputs.
19 Connecting -compatible A V Components W ith (Remote Interacti ve) you can control your - compatible Onkyo CD player , DVD player , or cassette recorder with the HT -R510’ s remote controller , an.
20 Installing Y our Speaker s Y ou can use two sets of speakers with your HT -R510: speaker set A and speaker set B. W ith speak er set A , which should be installed in your main listening room, and c.
21 Installing Y our Speaker s —Continued Before you connect your speakers, read the follo wing: • Disconnect the po wer cord from the wall outlet. • Read the instructions supplied with your speakers. •P ay close attention to speaker wiring polarity .
22 Connecting Antenna This chapter explains ho w to connect the supplied indoor FM antenna and AM loop antenna, and how to connect commer- cially av ailable outdoor FM and AM antennas.
23 Connecting Antenna —Continued If you cannot achie ve good reception with the supplied indoor FM antenna, try a commercially av ailable outdoor FM antenna instead. Notes: • Outdoor FM antennas work best outside, b ut usable results can sometimes be obtained when installed in an attic or loft.
24 Po wering Up & Setting Up the HT -R510 Before connecting the po wer cord, connect all your speakers and A V components (see page 10 to page 23). W ith this function you can assign A V components (i.e., input sources) with digital audio outputs to the HT -R510’ s digital inputs.
25 Configuring Speaker Set A This chapter describes ho w to configure speaker set A to achie ve the best results from your surround sound system. There is no speaker configuration for speaker set B.
26 Configuring Speaker Set A —Continued To achiev e the best bass performance from your speaker sys- tem, you need to set the crossov er frequency according to the size and frequency response of your subw oofer and other speakers (front, center , and surround).
27 Configuring Speaker Set A —Continued W ith this function you can adjust the volume of each indi vid- ual speaker so that you can hear all speakers equally at the listening position. Note: Y ou cannot use this function while the HT -R510 is muted (see page 32).
28 Pla ying Y our A V Components This chapter explains ho w you can play your A V components through the HT -R510. See pages 10–19 for information on connecting your A V components to the HT -R510. Using Digital Inputs The digital input assigned to the input source (see page 24) has priority ov er that input source’ s analog input.
29 Playing Y our A V Components —Contin ued While “ Auto” is displayed, the name of the digital input cur- rently assigned to the input source (page 24) is displayed in parenthesis. For e xample, “ Auto (CO AX). ” The possible inputs are OPT1, OPT2, and CO AX.
30 Using the T uner This chapter explains ho w to use the built-in tuner . Y ou can store your fa vorite radio stations as presets for con- venient selection. If y ou selected the FM band: The A UTO indicator appears on the display and the HT -R510 searches for the next station automatically .
31 Using the T uner —Continued Y ou can store up to 30 of your fa vorite radio stations as pre- sets. Y ou can easily select previously stored presets as follo ws. Y ou can delete unwanted presets as follo ws. Other Functions: See page 32 for functions that you can use while listening to the radio.
32 Common Functions This chapter explains functions that can be used with an y input source. Y ou can turn on and off speak er sets A and B indi vidually . Note: When you turn on speaker set B, the listening mode for speaker set A is set to Stereo. W ith this function you can temporarily mute the output of the HT -R510.
33 Common Functions —Continued W ith this function you can adjust the brightness of the dis- play . W ith this function you can adjust the volume le vel of each indi vidual speaker as you like.
34 Using the Listening Modes W ith its built-in surround-sound decoders and DSP pro- grams, the HT -R510 can transform your home listening room into a movie theater or concert hall. To get the most from surround sound, it’ s important that you install and configure your speakers correctly .
35 Using the Listening Modes —Continued The listening modes are explained belo w . Basic Modes Direct: The selected input source is fed directly to the po wer- amp stages and through to the front left and right speakers with minimal processing.
36 Using the Listening Modes —Continued Y ou can select the listening modes by using the following b uttons: [DIRECT], [STEREO], [SURR OUND], [DSP], and [A.
37 A udio Adjust Functions These functions only work with speaker set A. Audio Adjust provides various functions for adjusting the sound, including se veral especially for use with Dolby Digi- tal, DTS, and Pro Logic II material. The follo wing table lists the Audio Adjust functions, their ranges and default v alues.
38 A udio Adjust Functions —Continued The Audio Adjust functions are explained belo w . ■ Bass W ith this function you can boost or cut lo w-frequency sounds output by the front speakers from –12 dB to +12 dB in 2 dB steps.
39 Recor ding This chapter explains ho w to record the selected input source to an A V component with recording capability , and how to record audio and video from two dif ferent sources. Y ou can record only to A V components that are connected to the T APE OUT or VIDEO 1 OUT connectors.
40 Using the Remote Contr oller RC-518M with Y our Other A V Components Connecting your -compatible Onkyo CD player , DVD player , or cassette recorder to the HT -R510 via allows you to control your system with the HT -R510’ s remote con- troller by pointing it at the HT -R510.
41 Using the Remote Controller RC-518M with Y our Other A V Components —Contin ued Using the RC-518M If you need to enter the manufacturer’ s code for your A V component into the remote controller , see page 40. 1 P oint the remote controller at the HT -R510 and use the input selector buttons to select an input source f or the HT -R510.
42 Using the Remote Controller RC-518M with Y our Other A V Components —Contin ued VCR mode TV mode Y ou must enter the appr opriate manufacturer’ s code (see page 40).
43 Using the Remote Controller RC-518M with Y our Other A V Components —Contin ued Cable mode* Satellite mode* Y ou must enter the appr opriate manufacturer’ s code (see page 40). Y ou must enter the appr opriate manufacturer’ s code (see page 40).
44 Tr oubleshooting Symptom P ossible cause Remedy Amp Can ’t turn on the HT -R510? The power c ord is not c onnected. Co nnect the power c ord to a suitable wall outlet (page 24). External interferenc e is affecting the HT -R510’ s digital circuitr y .
45 Tr oubleshooting —Continued Symptom P ossible cause Remedy Amp A low-frequency noise or h um can be heard? The audio connecting cables at the r ear of the HT -R510 are too close t o the power cor d. U ntangle the audio cables and position them as far aw ay as possible fr om the power cor d.
46 Tr oubleshooting —Continued Symptom P ossible cause Remedy T uner Rec ept io n is noisy , inter - mittent, and the FM STE- REO indicator flashes? Yo u’ re t oo far away fr om the transmitter . Or , y our FM antenna is in the wrong position or pointing in the wrong direction.
47 Specifications AMPLIFIER SECTION VIDEO SECTION TUNER SECTION FM AM GENERAL REMO TE CONTR OL Specifications and features are subject to change without notice. Power sup- ply and voltage v ary depending on the area in which the unit is purchased. Continuous A verage Power output (FTC) All channels: 100 watts per channel min.
http://www.onky o.co.jp/ HOMEP A GE SN 29343479 I0303-1 Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-831-8124 ONKYO U.S.A. CORPORATION 18 Park Way, Upper Saddle River, N.J. 07458, U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Onkyo HT-R510 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Onkyo HT-R510 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Onkyo HT-R510 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Onkyo HT-R510 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Onkyo HT-R510, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Onkyo HT-R510.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Onkyo HT-R510. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Onkyo HT-R510 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
