Manuale d’uso / di manutenzione del prodotto DS-333 del fabbricante Olympus
Vai alla pagina of 76
1 DIGIT AL VOICE RECORDER DS-330 Thank you for purchasing an Olympus Digital V oice Recorder . Please read these instructions for information about using the product correctly and safely . Keep the instructions handy for future reference. T o ensure successful recordings, we recommend that you test the record function and volume before use.
2 ● Do not leave the recorder in hot, humid locations such as inside a closed automobile under direct sunlight or on the beach in the summer . ● Do not store the recorder in places exposed to excessive moisture or dust. ● Do not use organic solvents such as alcohol and lacquer thinner to clean the unit.
3 AC Adapter W arning • Do not attempt to disassemble, repair or modify the AC adapter in any way . • Keep foreign objects including water , metal, or flammable substances from getting inside the product. • Do not moisten the AC adapter or touch it with a wet hand.
4 Main Features ● The recorder stores highly compressed DSS format voice messages in 16 MB integrated flash memory . ● The recorder supports two recording modes, SP (Standard Playback) mode or LP (Long Playback) mode.
5 T able of Contents Getting Started Identification of Parts ................................ 6 Inserting Batteries ..................................... 8 Using the AC Adapter ................................ 9 Recording .............................
6 Identification of Parts Identification of Parts 12 3 & ^ % $ # @ 4 5 6 7 8 9 0 ! ) - w q * ( = e 1 Built-in microphone 2 Record/Play indicator lamp 3 Microphone jack 4 VOLUME control 5 NEW butto.
7 Identification of Parts 1 Battery indicator 2 Alarm indicator 3 VCV A(V ariable Control V oice Actuator) indicator 4 Record mode indicator 5 Folder 6 Current file 7 Erase lock indicator 8 Character .
8 Inserting Batteries 1 Lightly press down on the arrow and slide the battery cover open. 2 Insert two AAA alkaline batteries, observing the correct polarity . 3 Close the battery cover completely . ....................................................
9 Using the AC Adapter Plug the optional AC adapter (Olympus Model A321 or A322) into household power outlet and connect the power plug to the recorder ’s power connector (DC 3 V) as shown in the illustration. Always stop recording before connection.
10 Setting T ime/Date If you have set the time and date, information as to when an audio file is recorded is stored automatically with that file. The time and date should be set to ease file management tasks. The time and date setting is also needed to perform the alarm playback function.
11 Setting Time/Date 4 Set the hour . 1 Press the FF/+ button or REW/ – button to set the hour . 2 Press the REC/SET button to accept the hour . 5 Set the minute. 1 Press the FF/+ button or REW/ – button to set the minute. 2 Press the REC/SET button to accept the minute.
12 2 3 4 1 Recording The recorder provides five folders, A , B , C , D and E , and each message recorded in a folder is saved as a Digital Speech Standard (DSS) file.
13 T o instantly review a recording (Quick review) Press the REW/ – button while recording, and release it when you want to start playing a file. The recorder plays up to the quick review point, then stops. Y ou can append additional recordings in the same file from that point.
14 Recording Overwrite Recording Y ou can overwrite a previously recorded file from any point within the file. Note that the overwritten recordings will be erased. 1 Choose and play the file you want to overwrite. 2 Press the STOP button where you want to start overwriting.
15 Insert Recording Additional recordings can be inserted into previously recorded files. 1 Choose and play the file you want to insert. 2 While playing a file, press the FOLDER/MENU button if you want to insert additional recording. “ INSERT REC? ” appears on the display .
16 Using the V ariable Control V oice Actuator (VCV A) When the microphone senses that sounds have reached a preset volume, the built-in V ariable Control V oice Actuator (VCV A) starts recording automatically , and stops when the volume drops.
17 Using the V ariable Control V oice Actuator (VCV A) 7 Start the recording. When the sound volume is lower than the preset pause sound level, recording automatically pauses after approximately 1 second, and “ ST ANDBY ” flashes on the display . The record/play indicator lamp glows when recording starts and flashes when recording pauses.
18 Recording Modes (REC MODE) Y ou can choose between two recording modes: SP (Standard Playback) mode and LP (Long Playback) mode. Once you choose a mode, files are recorded in the selected mode as long as you do not change the mode.
19 Microphone Sensitivity Microphone sensitivity is adjustable to meet recording needs. Microphone Sensitivity MICSENS CONF DICT Using the MICSENS switch, choose between the CONF and DICT positions. CONF : High-sensitivity mode that records sounds in all directions.
20 Playing Playing Y ou can start playing a file at any point. 1 Press the PLA Y button to start playback. The record/play indicator lamp glows green. a Current playback time b T otal recording time of the file being played 2 Adjust the VOLUME control to your liking.
21 Playing Fast Playback (F .PLA Y) Slow Playback (S.PLA Y) Fast Forward (FF) Rewind (REW) Cue (CUE) Review (REV) Press the PLA Y button once while playing a file. → The recorder plays back at approximately 50% faster than normal rate. Press the PLA Y button once while fast playing back.
22 Continuous Playback (ALL PLA Y) Continuous Playback (ALL PLA Y) 1 Press and hold the FOLDER/ MENU button for 1 second or longer . The menu opens. ( ☞ P .41) 2 Press the FF/+ or REW/ – button until “ ALL PLA Y ” flashes on the display . 3 Press the REC/SET button.
23 Noise Cancel Function Noise Cancel Function 1 Press and hold the PLA Y button for 1 second or longer while the file is playing. Displays currently set Noise Cancel level. 2 Press the PLA Y button to choose a noise cancel level. Each time you press the PLA Y button, the display changes as follows.
24 Erasing Erasing One File at a T ime A selected file can be erased from a folder. 1 Press the FOLDER/MENU button to choose a folder . The folder name is displayed for approximately 2 seconds. 2 Press the FF/+ or REW/ – button to choose the file you want to erase.
25 Erase All Files from a Folder All files in a folder can be erased simultaneously , except for locked files. ( ☞ P .29) 1 Press the FOLDER/MENU button to choose the folder you want to erase all files. The folder name is displayed for approximately 2 seconds.
26 Locking Files (LOCK) Locking Files (LOCK) Locking a file keeps important data from being accidentally erased. Locked files are not erased when you choose to erase all files from a folder . ( ☞ P .25) 1 Press the FOLDER/MENU button to choose a folder .
27 Index Marks Setting an Index Mark 1 Press the INDEX button during recording or playback to set an index mark. An index number appears on the display . Locating an Index Mark 1 Hold the FF/+ or REW/ – button while playing a file. The recorder stops for 1 second when it reaches the index mark.
28 Alarm Playback Function (ALARM) The alarm playback function can be set to play a selected file at a pre-set time. Alarm Playback Function (ALARM) 1 Press the FOLDER/MENU button to choose a folder . 2 Press the FF/+ or REW/ – button to choose the file to be played when the alarm sounds.
29 Alarm Playback Function (ALARM) 7 Press the REC/SET button to complete the setup screen. When you choose ON, the hour indicator flashes. When you choose OFF , the alarm indicator disappears and finishes with Step 12. 8 Press the FF/+ or REW/ – button to set the hour .
30 LCD Contrast Adjustment (CONTRAST) 1 Press and hold the FOLDER/ MENU button for 1 second or longer . The menu opens. ( ☞ P .41) 2 Press the FF/+ or REW/ – button until “ CONTRAST ” flashes on the display . 3 Press the REC/SET button. The LCD display contrast setup process begins.
31 Backlight (BACKLIGHT) The backlight for the recorder will be activated for approximately 10 seconds each time a button is pressed. Y ou can select whether or not you would like to use the backlight. 1 Press and hold the FOLDER/ MENU button for 1 second or longer .
32 Assigning Folder Names (FolderName) Assigning Folder Names (FolderName) 1 Press and hold the FOLDER/ MENU button for 1 second or longer . The menu opens. ( ☞ P .41) 2 Press the FF/+ or REW/ – button until “ FolderName ” flashes on the display .
33 Assigning Folder Names (FolderName) Push Action Button T o input the selected character and advance the input position. Confirms folder name or file comment. Selects character to be input: forward. Skips forward quickly through characters. Selects character to be input: back.
34 Assigning Folder Names (FolderName) 7 When you have finished setting the folder name, press and hold the REC/SET button for 1 second or longer . This completes the folder naming procedure. (If you wish to continue assigning names to folders, press the REC/SET button and repeat the procedure from step 4.
35 Assigning File Comments (COMMENT) 1 Press and hold the FOLDER/ MENU button for 1 second or longer . The menu opens. ( ☞ P .41) 2 Press the FF/+ or REW/ – button until “ COMMENT ” flashes on the display . 3 Press the REC/SET button. The file comment setup process begins.
36 Moving Files Across Folders 1 Choose the file you want to move and play it. 2 Press the FOLDER/MENU button while playing the file. “ INSERT REC? ” appears on the display . 3 Press the FOLDER/MENU button again to change to “ FILE MOVE? ” . 4 Press the REC/SET button.
37 5 Press the FF/+ or REW/ – button to choose a destination folder . If you choose the current folder as the destination folder , the selected file will move to the end of the existing files in it. 6 Press the REC/SET button to accept the chosen destination folder .
38 1 Press and hold the FOLDER/ MENU button for 1 second or longer . The menu opens. ( ☞ P .41) 2 Press the FF/+ or REW/ – button until “ BEEP ” flashes on the display . 3 Press the REC/SET button. The system sound setup process begins. 4 Press the FF/+ or REW/ – button to choose between ON and OFF .
39 LCD Display Information 1 Press the DISPLA Y button. The LCD display views will switch every time the DISPLA Y button is pressed. LCD Display Information While stop or playback mode It will repeatedly cycle through 1 to 4 .
40 Formatting the Recorder (FORMA T) Formatting the Recorder (FORMA T) 1 Press and hold the FOLDER/ MENU button for 1 second or longer . The menu opens. ( ☞ P .41) 2 Press the FF/+ or REW/ – button until “ FORMA T ” flashes on the display . 3 Press the REC/SET button.
41 Menu list Menu List REC MODE VCV A LOCK ALARM ALL PLA Y CONTRAST BACKLIGHT BEEP TIME&DA TE FolderName COMMENT FORMA T 1 2 3 4 5 6 7 8 USB AUDIO 9 0 ! @ # INSERT REC ? FILE MOVE ? 1 2 Notes • .
42 Using DSS Player Software By connecting the recorder to your PC, you will be able to use DSS Player in the following ways: • Play and archive voice files from your PC.
43 PC : Operating System : RAM : Hard drive space : Drive : Display : USB port : Audio I/O terminals : iMac/ iBook/ Power Mac G3,G4/ PowerBook G3 (The computer must support a standard USB port.
44 Installing Software Before you connect the USB cable to the recorder and your PC, you must first install the software. Be sure to confirm the following before installation: • Exit all running applications. • Eject the floppy disk if you are using one.
45 9 Select a program menu folder . Y ou may change the program menu folder to another one, such as [Start Up]. T o accept the default folder, click on [Next]. 10 Authorizing the start of file copying. Confirm all “ Current Settings ” . T o accept them, click on [Next].
46 7 Restart the computer . Y ou need to restart your computer when DSS Player for Mac is installed. T o continue, click on [Y es]. T o cancel installation, click on [No]. 8 Completing setup. Installation has finished. Click either [Quit] or [Restart].
47 Uninstall Software The process of removing software installed on your PC is called uninstalling. Perform uninstalling when you no longer need the software. 1 Exit DSS Player . 2 Click on the [Start] button, select [Programs], then [Olympus DSS Player 2002].
48 1 Exit DSS Player . 2 Double-click the Macintosh HD icon. If you use OS10.1, proceed to step 5. 3 Delete the following eight drivers from Function Enhancement in the System Folder: (OS 8,9 only) .
49 Using Online Help T o open Online Help, do either of the following: (Windows) • Click on the [Start] button, select [Programs], then [Olympus DSS Player 2002], then click on [Help]. • While DSS Player is running, choose [Contents] from the [Help] menu.
50 Connecting to Y our PC Be sure to finish installing DSS Player before connecting the recorder . If you connect the recorder before installing DSS Player , the “ Add New Hardware Wizard ” dialog box will open. If this happens, click on [Cancel] to exit the wizard, then install DSS Player .
51 Connecting to your PC using the cradle Place the recorder on the cradle 1 Insert end A of the USB cable to your PC's USB port or USB hub. 2 Connect the end b of the USB connection cable to the cradle. 3 Make sure that the recorder is stopped, and place it in the cradle.
52 Running DSS Player 1 Start Windows. 2 Connect the recorder to your PC. For the connection procedure, refer to “ Connecting to Y our PC ” . ( ☞ P .50) When you connect the recorder to your PC for the first time, the USB Driver Setup Wizard will open.
53 1 Start your Macintosh. 2 Connect the recorder to your PC. For cable connection instructions, see “ Connecting to Y our PC ” . ( ☞ P .50) 3 Double-click the DSS Player for Mac folder . The DSS Player for Mac folder opens. 4 Double-click DSS Player .
54 Window Names 1 Play Control Bar Control buttons to play and stop voice files. 2 Dictation Folder Window Will display the directory structure of the DSS, WMA, W A VE (Windows only) and AIFF (Macintosh only)-format files stored on your PC's hard disk.
55 Importing voice files to your PC from the recorder is called downloading. With DSS Player , there are three ways to download voice files to your PC: • Download Selected Files Download one or several voice files to your PC. • Download Folders Download all the voice files in one folder .
56 3 Download the voice file. (Windows) From the [Download] menu, click on [Download Selected Files]. (Macintosh) From the [T ools] menu, click on [Download Selected Files]. 4 Download complete. Once the transmission screen closes and the record/play indicator lamp on the recorder goes dark, the downloading is completed.
57 1 Select the folder . Select the folder that contains the voice file you would like to play . The illustration shows that to select from among voice files already downloaded, Folder A in the Dictation Folder window was selected. 2 Select the voice file.
58 1 Select the folder . Select the folder that contains the voice file to upload from the Dictation Folder window . 2 Select the voice file. Select the voice file to upload from the V oice File List Box. 3 Select the folder to upload. (Windows) From the [Download] menu select [Upload Files] or click on the Upload icon.
59 Direct Recording on PC and Editing on PC If you want to record and edit voice files using your PC, open the [Remote Edit] window while the recorder is connected to your PC ( ☞ P .50). Y ou can easily create new files, insert recordings, overwrite recordings, edit index marks, and do other tasks.
60 Direct Recording on PC and Editing on PC Y ou can record voice files from a Digital Voice Recorder directly to a computer . With a Digital V oice Recorder connected, choose the [Direct Record to PC] command from the [T ools] menu. Recording a new file 1 Set recording.
61 3 Start recording. Click on [Start] in the recording setup window . Recording will start. Y ou can only change the sound quality and sensitivity settings before recording. 4 Stop recording. Click on [Stop] in the Record Window . 3 4 Converting File Formats to AIFF Files* Choose the [Save as] from the [File] menu.
62 Changing User ID The user ID is used in DSS file names ( ☞ P .57) that are recorded on a Digital V oice Recorder . 1 Start DSS Player . 2 Start the e-mail software, then select New Mail.
63 Editing File Comments Y ou can use a PC to create or edit file comments in DSS Player in the [Edit Comments] window , and transfer them from the PC to the recorder . Y ou can also edit file comments imported from the recorder to a PC. Choose the [Edit Comments] command from the [T ools] menu.
64 Editing a T emplate Y ou can edit folder name and file comment templates in DSS Player in the [Edit & Upload T emplates] window and transfer them to the recorder . T emplates downloaded from the recorder can also be edited. (Windows) Select [Edit & Upload T emplates] from [Download] to open the [Edit and Upload T emplate] window .
65 Using V oice Recognition Software (optional) When you use voice-recognition software such as IBM ViaV oice, it is recommended that you set the recorder to PC microphone and have the software learn the characteristics of the speaker ’ s voice and the recorder ’ s built-in microphone to maximize the accuracy of voice recognition.
66 Using V oice Recognition Software (optional) ············································································.
67 Executing V oice Recognition 1 Select the folder . Select the folder containing the voice file you want to process with voice recognition from the Dictation Folder window . 2 Select the voice file. Select the desired voice file to process with voice recognition from the V oice File List Box.
68 When recording voices for use in voice recognition, set up your DSS recorder as follows to facilitate recognition. • Set the microphone sensitivity to "DICT". ( ☞ P .19) • Set the recording mode to "SP". ( ☞ P .18) • Set the V ariable Control Voice Actuator (VCV A) to "OFF".
69 Using the recorder as a USB speaker ················································································.
70 Alarm Message List Meaning Low battery power Erase-locked Index full Folder full Maximum number Zero remaining memory No file Change recording mode Error in the internal flash memory System error T oo many characters input PC microphone indicator Formatting error Action Replace with new batteries.
71 T roubleshooting Probable cause The batteries are not loaded properly . The batteries are dead. If none of these suggestions works The recorder is in HOLD mode. The recorder is in HOLD mode. The batteries are dead. Low remaining internal flash memory .
72 Action Turn "OFF" the Noise Cancel function. ( ☞ P .23) The Noise Cancel function doesn't work while a file is being played back in Fast Playback or Slow Playback mode. ( ☞ P .21) Turn the USB AUDIO "OFF" in the recorder's menu settings.
73 Accessories (optional) External microphone: ME9*/1 1* A lavalier omnidirectional microphone that clips to clothing. Use to record your own voice or people near you. Conference microphone: ME7 A highly sensitive directional microphone (shotgun microphone).
74 Specifications Recording format .................................................. DSS (Digital Speech Standard) Input level ............................................................ – 70 dBv Sampling frequency SP mode: .......................
75 T echnical Assistance and Support The following are for only technical questions and support about OL YMPUS recorder and software. ◆ T echnical Hotline Number in the U.S. and Canada 1-888-553-4448 ◆ User Support E-mail address in the U.S. and Canada distec@olympus.
Declaration of Conformity Model Number: DS-330 T rade Name: DIGIT AL VOICE RECORDER Responsible Party: OL YMPUS AMERICA INC. Address: 2 Corporate Center Drive, Melville, NY 1 1747-3157, U.S.A. T elephone Number: 800-622-6372 This device Complies with Part 15 of the FCC Rules.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Olympus DS-333 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Olympus DS-333 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Olympus DS-333 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Olympus DS-333 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Olympus DS-333, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Olympus DS-333.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Olympus DS-333. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Olympus DS-333 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
