Manuale d’uso / di manutenzione del prodotto A7V266-M del fabbricante Asus
Vai alla pagina of 116
Motherboard ® A7V266-M User Guide.
ii Checklist Product Name: A7V266-M Manual Revision: 1.00 E921 Release Date: December 2001 Copyright © 2001 ASUST eK COMPUTER INC. All Rights Reserved.
iii Features About this guide This user manual contains complete information for installing the ASUS A7V266-M motherboard. How this guide is organized • Chapter 1: Product introduction. A summary of product features and special attributes of new technologies.
iv Safeguards Contents About this guide .............................................................................. ii i Safety information ........................................................................... vi FCC/CDC statements ..........
v Contents Chapter 3: Powering up ......................................................... 39 3.1 Starting up for the first time ................................................... 3 9 3.2 Powering off the computer ...................................
vi Safet y information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
vii FCC/CDC statements Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
viii ASUS contact information ASUST eK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 T elephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw T echnical Support T el (English): +886-2-2890-7123 T el (Chinese): +886-2-2890-71 13 Fax: +886-2-2890-7698 Email: tsd@asus.
Chapter 1 Product introduction.
ASUS P4S333-M motherboard.
ASUS A7V266-M motherboard user guide 1 Welcome! Thank you for buying the ASUS ® A7V266-M motherboard! The A7V266-M is powered by AMD ® Athlon ™ , Athlon ™ XP and Duron ™ processors and supplies advanced features to ensure long-lasting, superlative performance.
2 Chapter 1: Product introduction 1.2 Core Specifications The A7V266-M motherboard is designed and assembled according to the highest standards. This ASUS motherboard represents the latest advances and of fers users the finest componentry available today .
ASUS A7V266-M motherboard user guide 3 1.3 Special Features Easy Overclocking • Quickly adjust CPU frequency multiples with BIOS in JumperFree ™ Mode • Adjustable FSB/MEM/PCI frequency ratio •.
4 Chapter 1: Product introduction Location Processor Support Socket A for AMD ® Athlon ™ and Duron ™ Processors ....... 1 Feature Setting DIP Switches ......................................... 4 Chipsets VIA ® KT266A North Bridge ...............
ASUS A7V266-M motherboard user guide 5 1.4.1 Component Locations 3 14 1 16 2 4 5 6 9 8 7 10 12 19 20 18 13 11 15 17 21 22 23 24 25 26 27 30 29 28.
.
Chapter 2 Hardware information.
ASUS P4S333-M motherboard.
ASUS A7V266-M motherboard user guide 7 2.1 Motherboard installation The A7V266-M uses the micro-A TX form factor that measures 9.6 inches x 9.6 inches, a standard fit for most chassis.
8 Chapter 2: Hardware information 2.2 Motherboard layout ® PS/2KBMS T: Mouse B: Keyboard P ANEL FLOPPY SECONDARY IDE PRIMARY IDE A7V266-M CR2032 3V Lithium Cell CMOS Power A TX Power Connector 2Mbit Firmware Hub AUX CHR_F AN USB2_3 CD1 LED1 COM1 P ARALLEL PORT COM2 BACK_RT GAME_AUDIO Mic In Line Out Line In CPU_F AN IDELED 24.
ASUS A7V266-M motherboard user guide 9 2.2.1 Layout contents CPU, Memory and Expansion Slots 1) Socket 462 p. 1 1 CP U Support 2) DIMM 1/2/3 p. 13 System Memory Support 3) PCI 1/2 p. 15 32-bit PCI Bus Expansion Slots 4) AGP 4x p. 18 Accelerated Graphics Slot Motherboard Settings (Switches and Jumpers) 1) JEN p.
10 Chapter 2: Hardware information 2.3 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings. ® A7V266-M A7V266-M Onboard LED ON OFF Standby Power Powered Off CAUTION! 1.
ASUS A7V266-M motherboard user guide 11 2.4 Central Processing Unit (CPU) 2.4.1 Overview The motherboard provides a Socket A (462) for CPU installation.
12 Chapter 2: Hardware information 4. Once completely inserted, press the CPU firmly and close the socket lever until it snaps shut. 5. Place the CPU fan and heatsink on the CPU. The heatsink should entirely cover the CPU. Carefully attach the heatsink locking brace to the plastic clips on the socket base.
ASUS A7V266-M motherboard user guide 13 2.5 System memor y 2.5.1 Overview This motherboard uses only Double Data Rate (DDR) Synchronous Dynamic Random Access Memory (SDRAM) Dual Inline Memory Modules (DIMMs). These sockets support up to 3GB system memory using non-ECC PC200/ 266 DIMMs.
14 Chapter 2: Hardware information 2.5.2 Memory configurations Install DIMMs in any of the following combinations. DIMM Location 168-pin DIMM (SDR) T otal Memory Socket 1 (Rows 0&1) 6 4MB, 1 28 MB.
ASUS A7V266-M motherboard user guide 15 2.6 Expansion slots The motherboard has two PCI slot and one Accelerated Graphics Port (AGP) slot.. The following sub-sections describe the slots and the expansion cards that they support. 2.6.1 Installing an expansion card Follow these steps to install an expansion card.
16 Chapter 2: Hardware information Standard Interrupt Assignments This table lists the standard IRQ assignments for most PC devices. IRQ Priority Standard Function 0 1 System T imer 1 2 Keyboard Contr.
ASUS A7V266-M motherboard user guide 17 Interrupt Request T able for this Motherboard This table lists the default IRQ assignments forthis motherboard.
18 Chapter 2: Hardware information ® A7V266-M A7V266-M Accelerated Graphics Port (AGP ) 2.6.4 AGP slot This motherboard provides an Accelerated Graphics Port (AGP 4X) slot to support AGP graphics cards. T ake note of the notches on the card golden fingers to ensure that they fit the AGP slot on your motherboard.
ASUS A7V266-M motherboard user guide 19 NOTE! The JEN jumper is set in conjunction with the DIP switches. In JumperFree ™ mode, set all DIP switches (DIP_SW) to OFF . ® A7V266-M A7V266-M DIP Switch ON 1234 SYSCLK OFF ON 1.Frequency Selection 2.Frequency Selection 3.
20 Chapter 2: Hardware information 2) CPU External Frequency Selection (SYSCLK DSW Switches 1 – 4) This option tells the clock generator which frequency to send to the CPU, DRAM, and the PCI bus. These switches permit selection of the CPU ’ s External frequency (or BUS Clock ).
ASUS A7V266-M motherboard user guide 21 ® A7V266-M A7V266-M USB Device W ake Up USB23_PWR USB01_PWR +5VSB 23 +5VSB 23 (Default) +5V 12 +5V 12 (Default) 3) USB Device W ake-up (USB01_PWR / USB23_PWR) .
22 Chapter 2: Hardware information ® A7V266-M A7V266-M Keyboard W ake Up KBWK Disable 23 Enable 12 (Default) 4) Keyboard W ake Up (KBWK) This jumper disables or enables the keyboard power up function.The default setting, [1-2], enables keyboard wake-up automatically .
ASUS A7V266-M motherboard user guide 23 ® A7V266-M A7V266-M On Board LAN Setting LAN_EN Disable 23 Enable (Default) 12 5) LAN Enable (2 pin) This jumper enables or disables the onboard LAN setting. The default position, [[2-3] enables the chipset. T o free up resources, it may be necessary to disable [1-2] the onboard LAN circuit.
24 Chapter 2: Hardware information 6) Clear RTC RAM (2-pin CLR_RTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS A7V266-M motherboard user guide 25 2.8 Connectors This section describes and illustrates the internal connectors on the motherboard. IMPORT ANT! Ribbon cables should always be connected with the red stripe to Pin 1 in the connector scoket.
26 Chapter 2: Hardware information 3) Universal Serial Bus Ports 1 & 2 (Black two 4-pin USB) T wo USB ports are available for connecting USB devices. 5) Serial Ports (T eal/T urquoise 9-pin COM1 / 9-pin COM2) T wo serial ports can be used for pointing devices or other serial devices.
ASUS A7V266-M motherboard user guide 27 6) Game/MIDI Ports (Gold 15-pin GAME_AUDIO) (optional) This connector supports a joystick or a game pad for playing games, and MIDI devices for playing or editing audio files.
28 Chapter 2: Hardware information 8) IDE Activity LED (2-pin IDELED) This connector supplies power to the cabinet ’ s IDE activity LED. Read and write activity by devices connected to the Primary or Secondary IDE connectors cause the IDE LED to light up.
ASUS A7V266-M motherboard user guide 29 ® A7V266-M A7V266-M IDE Connectors NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to PIN 1.
30 Chapter 2: Hardware information 1 1) CPU Fan, Power Fan, and Chassis Fan Connectors (CPU_, PWR_, CHA_F AN) Three fan connectors support cooling fans of 350mA (4.2 W atts) or less. Orient the fans so that airflow flows across the onboard heat sinks instead of expansion slots.
ASUS A7V266-M motherboard user guide 31 12) Infrared Module Connector (10-1 pin IR_CON) This connector supports an optional wireless transmitting and receiving infrared module.
32 Chapter 2: Hardware information 13) Power Supply Connectors (20-pin block A TXPWR) This connector supports an A TX 12V power supply . The plug from the power supply fits in only one orientation.
ASUS A7V266-M motherboard user guide 33 15) Internal Audio Connectors (4-1 pin CD, AUX, MODEM) (optional) These connectors allow you to receive stereo audio input from sound sources as a CD-ROM, TV tuner , or MPEG card. The MODEM connector allows the onboard audio to interface with a voice modem card with a similar connector .
34 Chapter 2: Hardware information ® A7V266-M A7V266-M Thermal Sensor Connector JTPWR Power Supply Thermal Sensor 17) Power Supply Thermal Sensor Connector (2 pin JTPWR) If you have a power supply with thermal monitoring, connect its thermal sensor cable to this connector .
ASUS A7V266-M motherboard user guide 35 18) Chassis Open Alarm Lead (4 pin CHASSIS) This lead is for a chassis designed for chassis intrusion detection. This requires an external detection mechanism such as a chassis intrusion monitor/ sensor or microswitch.
36 Chapter 2: Hardware information 20) ASUS Front Audio Connector ( 10-1 p i n IP ANEL) Connect the audio cable to this for front panel audio control. ® A7V266-M A7V266-M Front Panel Audio Connector .
ASUS A7V266-M motherboard user guide 37 21) System Power LED Lead (3-1 pin PLED) This 3-1 pin connector supplies the system power LED. The LED lights up when the system power is on, and the LED blinks when the system is in sleep or soft-of f mode.
.
Chapter 3 Powering up.
ASUS P4S333-M motherboard.
ASUS A7V266-M motherboard user guide 39 3.1 Star ting up for the first time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis.
40 Chapter 3: Powering up 3.3 Powering off the computer Y ou must first exit the operating system and shut down the system before switching of f the power . For A TX power supplies, you can press the A TX power switch after exiting or shutting down the operating system.
Chapter 4 BIOS setup.
ASUS P4S333-M motherboard.
ASUS A7V266-M motherboard user guide 41 4.1 Managing and updating your BIOS 4.1.1 Using the computer system for the first time It is recommended that you save a copy of the original motherboard BIOS along with a Flash Memory W riter utility (AFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later .
42 Chapter 4: BIOS Setup 5. Select 1. Save Current BIOS to File from the Main menu and press <Enter>. The Save Current BIOS T o File screen appears.
ASUS A7V266-M motherboard user guide 43 1. FTP) (see ASUS CONT ACT INFORMA TION on page x for details) and save to the boot floppy disk you created earlier . 2. Boot from the floppy disk. 3. At the “ A: ” prompt, type AFLASH and then press <Enter>.
44 Chapter 4: BIOS Setup 7. The utility starts to program the new BIOS information into the Flash ROM. The boot block is updated automatically only when necessary . This minimizes the possibility of boot problems in case of update failures. When the programming is done, the message “ Flashed Successfully ” appears.
ASUS A7V266-M motherboard user guide 45 4.2 BIOS Setup program This motherboard supports a programmable EEPROM that you can update using the provided utility described in section “ 4.
46 Chapter 4: BIOS Setup 4.2.1 BIOS menu bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADV ANCED Use this menu to enable and make changes to the advanced features.
ASUS A7V266-M motherboard user guide 47 General help In addition to the Item Specific Help window , the BIOS setup program also provides a General Help screen. Y ou may launch this screen from any menu by simply pressing <F1> or the <Alt> + <H> combination.
48 Chapter 4: BIOS Setup System Time [XX:XX:XX] Sets the system to the time that you specify (usually the current time). The format is hour , minute, second. V alid values for hour , minute and second are Hour: (00 to 23), Minute: (00 to 59), Second: (00 to 59).
ASUS A7V266-M motherboard user guide 49 4.3.1 Primary and Secondary Master/Slave T ype [Auto] Select [Auto] to automatically detect an IDE hard disk drive. If automatic detection is successful, Setup automatically fills in the correct values for the remaining fields on this sub-menu.
50 Chapter 4: BIOS Setup If no drive is installed or if you are removing a drive and not replacing it, select [None]. Other options for the T ype field are: [CD-ROM] - for IDE CD-ROM drives [LS-120] -.
ASUS A7V266-M motherboard user guide 51 T ranslation Method [LBA] Select the hard disk drive type in this field. When Logical Block Addressing (LBA) is enabled, the 28-bit addressing of the hard drive is used without regard for cylinders, heads, or sectors.
52 Chapter 4: BIOS Setup SMART Monitoring [Disabled] This field allows you to enable or disable the S.M.A.R.T . (Self-Monitoring, Analysis and Reporting T echnology) system that utilizes internal hard disk drive monitoring technology .
ASUS A7V266-M motherboard user guide 53 4.3.2 Keyboard Features Boot Up NumLock Status [On] This field enables users to activate the Number Lock function upon system boot. Configuration options: [Of f] [On] Keyboard Auto-Repeat Rate [6/Sec] This controls the speed at which the system registers repeated keystrokes.
54 Chapter 4: BIOS Setup Language [English] This field displays the BIOS language version. Supervisor Password [Disabled] / User Password [Disabled] These fields allow you to set passwords. T o set a password, highlight the appropriate field and press <Enter>.
ASUS A7V266-M motherboard user guide 55 4.4 Advanced Menu CPU Speed [Manual] When the motherboard is set to JumperFree ™ mode, this field allows you to select the internal frequency of the CPU. Select [Manual] if you want to make changes to the two subsequent fields.
56 Chapter 4: BIOS Setup Load Performance Setting [Normal] The [Manual] setting is the system default. Selecting [Optimal] boosts the speed performance of the entire system. However , it should be noted that the optimal performance setting may make the system less stable.
ASUS A7V266-M motherboard user guide 57 USB Legacy Support [Auto] This motherboard supports Universal Serial Bus (USB) devices. The default of [Auto] allows the system to detect a USB device at startup. If detected, the USB controller legacy mode is enabled.
58 Chapter 4: BIOS Setup NOTE! The following 4 SDRAM parameters appear only when you set the SDRAM Configuration to [User Defined]. SDRAM CAS Latency [3T] This item controls the latency between the SDRAM read command and the time the data actually becomes available.
ASUS A7V266-M motherboard user guide 59 SDRAM Active to Precharge Delay [6T] This item controls the number os SDRAM clocks used for SDRAM parameters. Bank Interleave [Auto] Configuration options: [Non.
60 Chapter 4: BIOS Setup Graphics Aperture Size [32MB] This feature allows you to select the size of mapped memory for AGP graphic data. Configuration options: [4MB] [8MB] [16MB] [32MB] [64MB] [128MB].
ASUS A7V266-M motherboard user guide 61 4.4.2 I/O Device Configuration Onboard FDC Swap A & B [No Swap] This field reverses the hardware drive letter assignments of floppy disk drivers.
62 Chapter 4: BIOS Setup ECP DMA Select [3] This field configures the parallel port DMA channel for the selected ECP mode. This selection is available only if you select [ECP] or [ECP+EPP] in Parallel Port Mode above. Configuration options: [1] [3] Onboard CIR I/O [Disabled] This field selects the CIR I/O channel address.
ASUS A7V266-M motherboard user guide 63 Slot 1, Slot 2 IRQ [Auto] These fields automatically assign the IRQ for each PCI slot. The default setting for each field is [Auto], which utilizes auto-routing to determine IRQ assignments.
64 Chapter 4: BIOS Setup IRQ XX Reserved [No/ICU] These fields indicate whether or not the displayed IRQ for each field is being used by a legacy (non-PnP) ISA card. The setting [No/ICU] for an IRQ field indicates that you are using the ISA Configuration Utility (ICU), and that this particular IRQ is NOT required by a legacy ISA card.
ASUS A7V266-M motherboard user guide 65 4.5 Power Menu The Power menu allows you to reduce power consumption. This feature turns off the video display and shuts down the hard disk after a period of inactivity . Power Management [User Defined] This field allows you to activate or deactivate the automatic power saving features.
66 Chapter 4: BIOS Setup Video Off Option [Suspend -> Off ] This field determines when to activate the video off feature for monitor power management. Configuration options: [Always On] [Suspend -> Of f] Video Off Method [DPMS OFF] This field defines the video off features.
ASUS A7V266-M motherboard user guide 67 4.5.1 Power Up Control AC PWR Loss Restart [Disabled] This allows you to set whether or not to reboot the system after power interruptions. [Disabled] leaves your system of f while [Enabled] reboots the system. [Previous State] sets the system back to the state it was before the power interruption.
68 Chapter 4: BIOS Setup Power On by Keyboard [Space Bar] This parameter allows you to use specific keys on the keyboard to turn on the system. This feature requires an A TX power supply that provides at least 1A on the +5VSB lead.
ASUS A7V266-M motherboard user guide 69 4.5.2 Hardware Monitor MB T emperature [xxxC/xxxF] CPU T emperature [xxxC/xxxF] JTPWR T emperature [Ignore] The onboard hardware monitor automatically detects the MB (motherboard) and CPU temperatures.
70 Chapter 4: BIOS Setup Boot Sequence The Boot menu allows you to select among the four possible types of boot devices listed using the up and down arrow keys. By using the <+> or <Space> key , you can promote devices and by using the <-> key , you can demote devices.
ASUS A7V266-M motherboard user guide 71 Plug & Play O/S [No] This field allows you to use a Plug-and-Play (PnP) operating system to configure the PCI bus slots instead of using the BIOS. When [Y es] is selected, interrupts may be reassigned by the OS.
72 Chapter 4: BIOS Setup 4.7 Exit Menu When you have made all of your selections from the various menus in the Setup program, save your changes and exit Setup.
ASUS A7V266-M motherboard user guide 73 Load Setup Defaults This option allows you to load the default values for each of the parameters on the Setup menus. When you select this option or if you press <F5>, a confirmation window appears. Select [Y es] to load default values.
74 Chapter 4: BIOS Setup.
Chapter 5 Software support.
ASUS P4S333-M motherboard.
ASUS A7V266-M motherboard user guide 75 5.1 Install an operating system This motherboard supports Windows 98/ME/NT/2000/XP and OS/2 operating system (OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware.
76 Chapter 5: Software support 5 . 3 A7V266-M Motherboard Support CD • VIA 4 in 1 drivers: Installs PCI Bus Master IDE Driver , VIA AGP Driver , VIA INF Driver , and IRQ Routing Driver . • VIA Bus Master PCI IDE MPD Driver: Installs PCI Bus Master IDE Driver • Audio Driver: Installs the latest audio driver .
ASUS A7V266-M motherboard user guide 77 • Cyberlink Video and Audio Applications: Installs Cyberlink PowerPlayer SE and Cyberlink VideoLive Mail. • ASUS Screen Saver: Installs a nifty ASUS screen saver . • E-Color 3Deep: Installs graphical driver and an application for tuning the quality of color output from CRT and LCD monitors.
78 Chapter 5: Software support.
ASUS A7V266-M motherboard user guide 79 5.4 ASUS PC Probe ASUS PC Probe is a convenient utility to continuously monitor your computer system ’ s vital components, such as fan rotations, V oltages, and temperatures.
80 Chapter 5: Software reference 5.4.2 Using ASUS PC Probe Monitoring Monitor Summary Shows a summary of the items being monitored. T emperature Monitor Shows the PC ’ s temperature.
ASUS A7V266-M motherboard user guide 81 Information Settings Lets you set threshold levels and polling intervals or refresh times of the PC ’ s temperature, fan rotation, and voltages. History Lets you record the current monitoring activity of a certain component of your PC for future reference.
82 Chapter 5: Software reference Device Summary Shows a summary of devices in your PC. DMI Explorer Shows information pertinent to the PC, such as CPU type, CPU speed, and internal/external frequencies, and memory size. Utility Lets you run programs outside of the ASUS Probe modules.
ASUS A7V266-M motherboard user guide 83 5.4.3 ASUS PC Probe T ask Bar Icon When the ASUS PC Probe senses a problem with your PC, portions of the ASUS PC Probe icon changes to red, the PC speaker beeps, and the ASUS PC Probe monitor is displayed.
84 Chapter 5: Software reference 5.5 ASUS Live Update ASUS LiveUpdate is a utility that allows you to update your motherboard ’ s BIOS and drivers. The use of this utility requires that you are properly connected to the Internet through an I nternet S ervice P rovider (ISP).
ASUS A7V266-M motherboard user guide 85 5.6 3Deep Color Tuner The 3-Deep color tuner is designed to match your CRT or LCD color monitor to maximize the color quality of all graphical applications. Users may also tune their internet applications to match “ true ” internet source colors with the color displayed on the monitor .
86 Chapter 5: Software reference 4. Select the color squares which most closely blend and match with the background. 5. The next step repeats the color matching process to achieve full color quality . 6. The tuning process is complete. Click on the bottom left button to connect to the internet and follow the instructions.
Glossary.
ASUS P4S333-M motherboard.
ASUS A7V266-M motherboard user guide 87 1394 1394 is the IEEE designation for a high performance serial bus tht of fers data transfers at 100/200/400 Mbps. This serial bus defines both a back plane physical layer and a point-to-point cable-connected virtual bus.
88 Appendix: Glossary Bus Master IDE PIO (Programmable I/O) IDE requires that the CPU be involved in IDE access and waiting for mechanical events. Bus master IDE transfers data to/from the memory without interrupting the CPU. Bus master IDE driver and bus master IDE hard disk drives are required to support bus master IDE mode.
ASUS A7V266-M motherboard user guide 89 I/O (Input/Output) The data transfers from the input devices like a keyboard, mouse, or scanner , to the output devices like a printer or the monitor screen. I/O Address The specific memory location for a particular device.
90 Appendix: Glossary RDRAM (Rambus DRAM) Developed by Rambus, Inc., this type of memory can deliver up to 1.6GB of data per second. RDRAM is the first interface standard that can be directly implemented on high performance VLSI components such as, CMOS DRAMs, memory controllers, and graphics/video ICs.
Index.
ASUS P4S333-M motherboard.
ASUS A7V266-M motherboard user guide 91 Index Index Index Index Index Symbols 3Deep Color T uner Using 85 A ASUS PC Probe Using 79 ASUS Update Using 84 A T API CD-ROM 70 Automatic Power Up 69 B BIOS A.
92 Index External frequency jumper 20 F Floppy 3 Mode 48 Floppy Disk Drive Connector 28, 33 H Hard Disk Drives (HDDs) CHS Capacity 51 Cylinders 51 Heads 51 LBA Capacity 51 Primary/Secondary Master 49 .
ASUS A7V266-M motherboard user guide 93 Power On Self T est 71 PS/2 Keyboard 25 PS/2 Keyboard Port 2 PS/2 Mouse 25 Function Control 56 PS/2 Mouse Port 2 R R TC RAM Clearing 9, 24 S SDRAM Active to Pre.
94 Index.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Asus A7V266-M è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Asus A7V266-M - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Asus A7V266-M imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Asus A7V266-M ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Asus A7V266-M, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Asus A7V266-M.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Asus A7V266-M. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Asus A7V266-M insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
