Manuale d’uso / di manutenzione del prodotto A7N8X-X del fabbricante Asus
Vai alla pagina of 60
Motherboard A7N8X-X User Guide.
ii Checklist Copyright © 2003 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, sto.
iii Features Contents Notices ............................................................................................ v Safety information .......................................................................... vi ASUS contact information ....
iv Safeguards Contents 2.4.3 Integrated Peripherals ......................................... 2-18 2.4.4 Power Management Setup .................................. 2-20 2.4.5 PnP / PCI Configurations ..................................... 2-22 2.5 Security Menu .
v Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vi Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
vii Conventions used in this guide T o make sure that you perform certain tasks properly , take note of the following symbols used throughout this manual. Where to find more information Refer to the following sources for additional information and for product and software updates.
viii ASUS contact infor mation ASUST eK COMPUTER INC. (Asia-Pacific) Address: 150 Li-T e Road, Peitou, T aipei, T aiwan 1 12 General T el: +886-2-2894-3447 General Fax: +886-2-2894-3449 Web Site: www .
ix A7N8X -X specif ications summar y CPU Chipset Front Side Bus (FSB) Memory Expansion slots IDE Audio LAN Special Features Back Panel I/O Ports Internal I/O Connectors (continued on the next page) So.
x A7N8X -X specifications summar y BIOS features Industry standard Manageability Support CD contents Accessories Form Factor * Specifications are subject to change without notice. 2Mb Flash ROM, Award BIOS, TCA V , PnP , DMI2.0, DMI, Green PCI 2.2, USB 1.
1-1 ASUS A7N8X-X Motherboard This chapter gives information about the ASUS A7N8X-X motherboard that came with the system.This chapter includes the motherboard layout, jumper settings, and connector locations.
1-2 1 . 1 W elcome! Thank you for buying the ASUS ® A7N8X-X motherboard! The ASUS A7N8X-X motherboard is loaded with the most advanced technologies to deliver the maximum performance for socket A processors. This motherboard is loaded with value-added features for guaranteed consumer satisfaction.
ASUS A7N8X-X Motherboard 1-3 1 .3 Motherboard components 235 1 14 4 9 7 6 8 12 18 13 16 17 1 0 1 1 15 19 20 28 26 22 23 24 27 25 21.
1-4 Chapter 1: Motherboard Information 12 CPU Sockets. Socket 462 (Socket A) Zero Insertion Force (ZIF) socket for the AMD Duron™/Athlon™/Athlon XP™ 3000+ processors. NorthBridge Controller . The NVIDIA ® nForce2™ 400 North Bridge controller chipset.
ASUS A7N8X-X Motherboard 1-5 Onboard LED. This onboard LED lights up if there is a standby power on the motherboard. This LED acts as a reminder to turn off the system power before plugging or unplugging devices. PCI slots. These 32-bit PCI 2.2 expansion slots support bus master PCI cards like SCSI or LAN cards with 133MB/s maximum output.
1-6 Chapter 1: Motherboard Information 1 .4 Motherboard layout 24.5cm (9.64in) 30.5cm (12.0in) PRI_IDE1 FLOPPY1 A7N8X-X nForce2 MCP Chipset ASUS ASIC with Hardware Monitor Accelerated Graphics Port (A.
ASUS A7N8X-X Motherboard 1-7 1 .5 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings.
1-8 Chapter 1: Motherboard Information 1 .8 Expansion slots The A7N8X-X motherboard has six (6) expansion slots. The following sub-sections describe the slots and the expansion cards that they support.
ASUS A7N8X-X Motherboard 1-9 1.8.2 Standard Interrupt Assignments IRQ Standard Function 0 System T imer 1 Keyboard Controller 2 Programmable Interrupt Controller 3* USB Universal Host Controller 4* Co.
1-10 Chapter 1: Motherboard Information 1 .9 Jumper s This section describes and illustrates the jumpers on the motherboard. 1. USB device wake-up (3-pin USBPWR_12,USBPWR_34,USBPWR_56) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices.
ASUS A7N8X-X Motherboard 1-11 3. Clear RTC RAM (CLRTC1) (optional) This jumper clears the Real T ime Clock (RTC) RAM of date, time and system setup parameters in CMOS. The RAM data in CMOS is powered by the onboard button cell battery . T o erase the RTC RAM: 1.
1-12 Chapter 1: Motherboard Information 1. 10 Connectors This section describes and illustrates the connectors on the motherboard. 1. IDE connectors (40-1 pin PRI_IDE1, SEC_IDE1) This connector supports the provided UltraDMA/133/100/66 IDE hard disk ribbon cable.
ASUS A7N8X-X Motherboard 1-13 3. A TX power connectors (20-pin A TXPWR1) These connectors connect to a n A TX 12V power supply . The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
1-14 Chapter 1: Motherboard Information 4. USB header (10-1 pin USB56) (optional) If the USB 2.0 port connectors on the back panel are inadequate, one USB header is available for four additional USB port connectors. Connect a 2-port USB connector set to a USB header and mount the USB bracket to an open slot in the chassis.
ASUS A7N8X-X Motherboard 1-15 Do not forget to connect the fan cables to the fan connectors. Lack of suf ficient air flow within the system may damage the motherboard components. These are not jumpers! DO NOT place jumper caps on the fan connectors! 6.
1-16 Chapter 1: Motherboard Information 9. Hard disk connector (2-pin IDELED1) This 2-pin connector connects to the front panel HD LED and lights up on every read/write activity of any of the disc drives connected to the primary or secondary IDE slots.
ASUS A7N8X-X Motherboard 1-17 1 1. Internal audio connectors (4-pin CD1, AUX1, MODEM1) These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner , MPEG card or modem.
1-18 Chapter 1: Motherboard Information 15. Infrared Module connector (10-1 or 10-2 pin IR_CON1) (optional) These connectors support an optional wireless transmitting and receiving infrared module. The module mounts to a small opening on the system chassis that support this feature.
ASUS A7N8X-X Motherboard 1-19 16. System panel connector (20-pin P ANEL1) This connector accommodates several system front panel functions. • System Power LED Lead (3-1 pin PLED) This 3-1 pin connector connects to the system power LED. The LED lights up when you turn on the system power .
1-20 Chapter 1: Motherboard Information.
ASUS A7N8X-X Motherboard 2-1 This chapter gives information about the ASUS A7N8X-X Basic Input/Output System (BIOS).This chapter includes updating the BIOS using the ASUS AFLASH BIOS that is bundled with the support CD.
2-2 Chapter 2: BIOS Setup 2. 1 Managing and updating your BIOS 2.1.1 Using the computer system for the first time It is recommended that you save a copy of the original motherboard BIOS along with a Flash Memory Writer utility (A WDFLASH.EXE) to a bootable floppy disk in case you need to reinstall the BIOS later .
ASUS A7N8X-X Motherboard 2-3 2.1.2 Updating BIOS procedures Updating BIOS via Built-in AwardBIOS Flash Utility The Binary Input/Output System (BIOS) can be updated using the built-in Flash Memory Writer utility or using a bootable floppy disk with the executable Flash Memory Writer Utility (A WDFLASH.
2-4 Chapter 2: BIOS Setup 8. T ype <Y> and Press <Enter> to flash the new Bios file. NOTE: Do not shut off system power or unplug the supply during the flash process. 6. The program asks to save the previous BIOS to a separate file. T ype a file name for the old bios and then press <Y>.
ASUS A7N8X-X Motherboard 2-5 9. The BIOS flashes and displays the results. Press <F1> to restart. 1. Boot from the floppy disk. 2. At the “A:” prompt, type “C:” and then press <Enter>. 3. At the “C:” prompt, type “A WDFLASH /e BIOSFILE” and then <Enter>.
2-6 Chapter 2: BIOS Setup 2.2 BIOS Setup progr am This motherboard supports a programmable FLASH ROM that you can update using the provided utility described in section “2.1 Managing and updating your BIOS.” Use the BIOS Setup program when you are installing a motherboard, reconfiguring your system, or prompted to “Run Setup”.
ASUS A7N8X-X Motherboard 2-7 2.2.1 BIOS menu bar The top of the screen has a menu bar with the following selections: MAIN Use this menu to make changes to the basic system configuration. ADV ANCED Use this menu to enable and make changes to the advanced features, including BIOS, Chipset, Peripheral, Power and PnP/ PCI configurations.
2-8 Chapter 2: BIOS Setup General help In addition to the Item Specific Help window , the BIOS setup program also provides a General Help screen. Y ou may launch this screen from any menu by simply pressing <F1> or the <Alt> + <H> combination.
ASUS A7N8X-X Motherboard 2-9 System Date [mm/dd/yy] Sets the system to the date that you specify (usually the current date). The format is month, day , year . V alid values for month, day , and year are Month: (1 to 12), Day: (1 to 31), Y ear: (up to 2084).
2-10 Chapter 2: BIOS Setup 2.3.1 Primary Master/Slave IDE HDD Auto-Detection [Press Enter] Press enter to automatically detect an IDE hard disk drive, if the hard drive is not already detected. In cases of undetected HDDs, pressing enter will detect the HDD and then open access to both the IDE Primary Master and Access Mode fields.
ASUS A7N8X-X Motherboard 2-11 After making your selections on this sub-menu, press the <Esc> key to return to the Main menu. When the Main menu appears, the hard disk drive field displays the size for the hard disk drive that you configured.
2-12 Chapter 2: BIOS Setup 2.3.2 Secondary Master/Slave IDE HDD Auto-Detection [Press Enter] Press enter to automatically detect an IDE hard disk drive, if the hard drive is not already detected. In cases of undetected HDDs, pressing enter will detect the HDD and then open access to both the IDE Primary Master and Access Mode fields.
ASUS A7N8X-X Motherboard 2-13 2.4 Advanced Menu Advanced menu items The Advanced menu accesses five important sub-menus: Advanced BIOS Features These fields set the functional properties of CPU caches, as well as boot devices, security and operational modes.
2-14 Chapter 2: BIOS Setup 2.4.1 Advanced BIOS Features Boot Virus Detection [Disabled] This field disables boot virus protection by default. Configuration options: [Enabled] [Disabled] CPU Level 1, Level 2 Cache [Enabled] These fields enables the CPU levels 1 and 2 cache by default.
ASUS A7N8X-X Motherboard 2-15 Boot-up NumLock Status [On] This field sets the capability of the NumLock light/key to display/activate the system. Configuration options: [On] [Off] Gate A20 Option [Fast] This field sets the gate A20 rate. The default is [Fast].
2-16 Chapter 2: BIOS Setup CPU Frequency Multiple Setting [Auto] This field sets the frequency multiple between the CPU’s internal frequency (CPU speed) and external frequency . Set this field in conjunction with CPU Frequency (MHz) to match the speed of the CPU.
ASUS A7N8X-X Motherboard 2-17 SDRAM RAS Precharge Delay [1] Row-precharge delay . SDRAM CAS Latency [2.5T] This field sets the override clock cycle for the latency time between the SDRAM read command and the moment that the data actually becomes available.
2-18 Chapter 2: BIOS Setup 2.4.3 Integrated Peripherals (Scroll down to view all items on the menu.) Video RAM Cacheable [Disabled] This field establishes whether or not the video RAM is cacheable. Disabled by default. Configuration options: [Enabled] [Disabled] DDR Reference V oltage [ 2.
ASUS A7N8X-X Motherboard 2-19 USB Controllers [V1.1+V2.0] This field sets the protocols for OnChip processing of USB outputs. The default accomodates USB protocols 1.0 and 2.0. Configuration options: [Disabled] [V1.1 +V2.0] [V1.1] USB Legacy Keyboard Support [Disabled] This field sets support for USB keyboards.
2-20 Chapter 2: BIOS Setup 2.4.4 Power Management Setup Onboard Parallel Port [378/IRQ7] This field sets the address of the onboard parallel port connector to 378/IRQ7 by default.
ASUS A7N8X-X Motherboard 2-21 V ideo Off Method [DPMS Support] This field defines “video off” features. The DPMS support option (Display Power Management System) permits the BIOS to control the video display card if it supports the DPMS feature.
2-22 Chapter 2: BIOS Setup Resources Controlled By [Auto(ESCD)] This field sets control over the IRQ resources by the automatic (ESCD) system or manual assignment of IRQ channels. The default enables automatic (ESCD) control. Configuration options: [Auto(ESCD)] [Manual].
ASUS A7N8X-X Motherboard 2-23 2.5 Security Menu The BIOS Setup program permits two dif ferent passwords to control access to the BIOS during system startup: a Supervisor password and a User password. Passwords are not case sensitive, meaning, passwords can be typed in either uppercase or lowercase letters.
2-24 Chapter 2: BIOS Setup 2.6 Hardware Monitor Menu The Harware Monitor menu displays all vital system statistics. Set Supervisor Password / Set User Password T o set a password, highlight the appropriate field and press <Enter>. T ype in a password then press <Enter>.
ASUS A7N8X-X Motherboard 2-25 MB, CPU T emperature [xx C / xx F] The onboard hardware monitor automatically detects the MB (motherboard) and CPU temperatures. VCORE V oltage, +3.3V V oltage, +5V V oltage, +12V V oltage The onboard hardware monitor automatically detects the voltage output through the voltage regulators.
2-26 Chapter 2: BIOS Setup 2.7 Exit Menu Exit & Save Changes Choose this option from the Exit menu to ensure the selected values are saved to the CMOS RAM. When selecting this option, a confirmation window appears. Select [Y es] to save changes and exit.
3-1 ASUS A7N8X-X Motherboard This chapter helps you power up your system and install drivers and utilities that came with the support CD. Starting Up Chapter 3.
3-2 Chapter 3: Starting-Up The contents of the support CD are subject to change at any time without notice. Visit the ASUS website for updates. Because motherboard settings and hardware options vary , use the setup procedures presented in this chapter for general reference only .
ASUS A7N8X-X Motherboard 3-3 3.2.2 Drivers menu The drivers menu shows the available device drivers if the system detects installed devices. Install the necessary drivers to activate the devices. NVIDIA nForce Driver This item installs the NVIDIA nForce set of drivers.
3-4 Chapter 3: Starting-Up PC-CILLIN 2002 This item installs the PC-cillin 2002 anti-virus software. ADOBE Acrobat Reader V5.0 This installs software for viewing files in Portable Document Format (PDF). ASUS Screen Saver This item installs the ASUS screen saver .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Asus A7N8X-X è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Asus A7N8X-X - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Asus A7N8X-X imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Asus A7N8X-X ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Asus A7N8X-X, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Asus A7N8X-X.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Asus A7N8X-X. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Asus A7N8X-X insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
