Manuale d’uso / di manutenzione del prodotto 2011 Titan del fabbricante Nissan
Vai alla pagina of 402
® 2011 TIT AN OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2011 N I SSAN TIT AN A6 0-D Printing : June 2010 (16) Publication No.
W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure.
MODIFICA TION OF Y OUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or per- formance problems resulting from modi- fications may not be covered under NISSAN warranties.
CALIFORNIA PROPOSITION 65 WARNING WARNING Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth de- fects or other reproductive harm.
NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs.
T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Display screen, heater, air co.
.
0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment .................
1. 2nd row seat belts (P . 1-13) 2. Roof-mounted curtain side-impact and rollover supplemental air bag (P . 1-45) 3. Front seat belts (P . 1-13) 4. Front-seat Active Head Restraints 5. Supplemental front-impact air bags (P . 1-45) 6. Seats (P . 1-2) 7.
1. Engine hood (P . 3-11) 2. Windshield wiper and washer switch (P . 2-27) 3. Windshield (P . 8-19) 4. Moonroof (if so equipped) (P . 2-52) 5. P ower windows (P . 2-48) 6. Door locks, keyfob, keys (P . 3-3, 3-7, 3-2) 7. Mirrors (P . 3-16) 8. Tire pressure (P .
1. Rear sliding window (if so equipped) (P . 2-51) 2. V ehicle loading (P . 9-13) 3. T ailgate/T ruckbox (P . 3-22) 4. T railer hitch/T owing (if so equipped) (P . 9-24) 5. Replacing bulbs (P . 8-29) 6. Bedside storage compartment (if so equipped) (P .
1. DVD entertainment system (if so equipped) (P . 4-56) 2. Moonroof (if so equipped) (P . 2-52) 3. Map lights (if so equipped) (P . 2-56) 4. Sun visors (P . 3-15) 5. HomeLink 姞 (if so equipped) (P . 2-56) 6. Glove box (P . 2-42) 7. Cup holders (P . 2-45) 8.
1. V ents (P . 4-13) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-29) 3. Steering wheel switch for audio control/Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-54, P . 4-70) 4. Instrument brightness control (P . 2-32) 5.
16. Aux jack (if so equipped) (P . 4-52) 17. P ower outlet (P . 2-38) 18. Heated seat switch (if so equipped) (P . 2-35) 19. Cup holder (P . 2-45) 20. V ehicle dynamic control (VDC) off switch (P . 2-36) 21. T ow mode switch (P . 2-38) 22. Electronic locking rear differential (E-Lock) system switch (if so equipped) (P .
1. Battery (P . 8-14) 2. Fuse/fusible link box (P . 8-21) 3. T ransmission dipstick (P . 8-11) 4. Engine oil filler cap (P . 8-9) 5. Brake fluid reservoir (P . 8-13) 6. Windshield-washer fluid reservoir (P . 8-13) 7. Air cleaner (P . 8-17) 8. Drive belt location (P .
W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-14 Automatic transmis- sion check warning light 2-14 Automatic transmis- sion park warning light ( model) 2-14 or Brake war.
Indicator light Name Page T urn signal/hazard indicator lights 2-20 V ehicle Dynamic Control (VDC) off indicator light 2-20 0-10 Illustrated table of contents.
1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front manual captain’s chair seat adjustment (if so equipped) ................................1 - 2 Front manual bench seat adjustment (if so equipped) .
WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries.
Forward and backward Pull the lever up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward.
Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward. Release the lever to lock the seatback in position.
belt fit. See “Precautions on seat belt usage” later in this section. Also, the seatback can be reclined to allow occupants to rest when the vehicle is stopped and the shift selector is in P (Park) .
ARMRESTS (if so equipped) T o use the armrests on the captain’s chairs (type A , if so equipped) , pull them down to the resting position. T o use the center armrest on the bench seat (type B, if so equipped) , pull on the tab in the center of the seat and fold it down to the resting position.
The illustration shows the seating positions equipped with head restraints. All of the head restraints are adjustable. 䉱 Indicates the seating position is equipped with a head restraint. + Indicates the seating position is not equipped with a head restraint.
T o raise the head restraint, pull it up. T o lower, push and hold the lock knob and push the head restraint down. Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2.
Install 1. Align the head restraint stalks with the holes in the seat. Make sure the head restraint is facing the correct direction. The stalk with the adjustment notches 䊊 1 must be installed in the hole with the lock knob 䊊 2 . 2. Push and hold the lock knob and push the head restraint down.
● If the head restraints are removed for any reason, they should be securely stored to prevent them from causing injury to passengers or damage to the vehicle in case of sudden braking or an accident. ● When returning the seatbacks to the upright position, be certain they are completely secured in the latched posi- tion.
WARNING ● If you fold the front passenger’s seat- back flat forward to carry longer ob- jects, be sure this cargo is properly se- cured and not near an air bag. In a crash, an inflating air bag might force that object toward a person. This could cause severe injury or even death.
䊊 3 Repeat this process to raise and secure the seat cushion on the other side of the vehicle for maximum storage capacity . T o return the rear bench seat to a seating posi- tion, reverse the process. Make sure to prop- erly push the seat cushion down into place.
WARNING Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could result in serious injury in an acci- dent or sudden stop.
WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit.
WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST .
PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest.
䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat.
WARNING When fastening the seat belts, be certain that the seatbacks are completely se- cured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle.
Shoulder belt height adjustment (front outboard seats) The shoulder belt anchor height should be ad- justed to the position best for you. (See “Precau- tions on seat belt usage” earlier in this section.
Fastening the seat belts 䊊 1 Insert the tongue into the buckle until you hear and feel the latch engage. 䊊 2 Tighten the belt by pulling the free end of the belt away from the tongue. 䊊 3 P osition the lap belt low and snug on the hips as illustrated.
䊊 4 Loosen the belt by holding the tongue at a right angle to the belt, then pull on the belt. Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle.
● Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors, work properly . If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt as- sembly should be replaced.
INFANTS Infants up to at least 1 year old should be placed in a rear-facing child restraint. NISSAN recom- mends that infants be placed in child restraints that comply with Federal Motor V ehicle Safety Standards or Canadian Motor V ehicle Safety Standards.
PRECAUTIONS ON CHILD RESTRAINTS WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly.
– Child restraint anchor points are de- signed to withstand loads from child restraints that are properly fitted. – Never use the anchor points for adult seat belts or harnesses. – A child restraint with a top tether strap should not be used in the front passenger seat.
LA T CH (Lower Anchors and T ethers for CHildren) SYSTEM Y our vehicle is equipped with special anchor points that are used with LA T CH (Lower Anchors and T ethers for CHildren) system compatible child restraints. This system may also be referred to as the ISOFIX or ISOFIX compatible system.
Installing child restraint LA T CH lower anchor attachments LA T CH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle. With this sys- tem, you do not have to use a vehicle seat belt to secure the child restraint.
T op tether anchor point locations Anchor points are located under the rear window behind the rear bench seat. REAR-FACING CHILD RESTRAINT INSTALLATION USING LA T CH Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraints” sections before installing a child restraint.
3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.
5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 2 through 4. REAR-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint.
Refer to all W arnings and Cautions in the “Child safety” and “Child restraints” sections before in- stalling a child restraint. Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats: 1.
4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt.
7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled.
4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.
Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraints” sections before installing a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1.
4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.
8. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the seat belt holds the restraint in place.
FORWARD-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS — FRONT BENCH CENTER POSITION WARNING ● Never install a rear-facing child re- straint in the front passenger seat. Front air bags inflate with great force. A rear-facing child restraint could be struck by the front air bag in a crash and could seriously injure or kill your child.
2. P osition the child restraint on the seat. Al- ways follow the child restraint manufactur- er’s instructions. The back of the child restraint should be secured against the vehicle seat back. If necessary , adjust or remove the head re- straint to obtain the correct child restraint fit.
5. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the seat belt holds the restraint in place.
Before securing the child restraint with the LA T CH lower anchors (rear outboard seating po- sitions only) or the seat belt, as applicable, follow these steps. 1. If necessary , raise or remove the head re- straint to position the top tether strap 䊊 1 over the top of the seatback.
Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213.
● Make sure the child’s head will be properly supported by the booster seat or vehicle seat. The seatback must be at or above the center of the child’s ears. For example, if a low back booster seat 䊊 1 is chosen, the vehicle seatback must be at or above the center of the child’s ears.
3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary , adjust or remove the head re- straint to obtain the correct booster seat fit. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the booster seat is removed.
PRECAUTIONS ON SUPPLEMENTAL RESTRAINT SYSTEM This Supplemental Restraint System (SRS) sec- tion contains important information concerning the following systems: ● Driver and passenger supplemental f.
WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations.
WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain and rollover air bags inflate if they are not properly re- strained. Pre-teens and children should be properly restrained in the rear seat, if possible.
WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. See “Child re- straints” earlier in this section for details.
WARNING ● The seat belts, the side air bags and curtain and rollover air bags are most effective when you are sitting well back and upright in the seat.
WARNING ● When sitting in the rear seat, do not hold onto the seatback of the front seat. If the side air bag inflates, you may be seriously injured. Be especially careful with children, who should always be properly restrained. Some examples of dangerous riding positions are shown in the illustrations.
1. Roof-mounted curtain side-impact and rollover supplemental air bag 2. Roof-mounted curtain side-impact and rollover supplemental air bags inflators 3. Air bag Control Unit (ACU) 4. Supplemental front-impact air bag mod- ules 5. Crash zone sensor 6.
The driver supplemental front-impact air bag is located in the center of the steering wheel. The passenger supplemental front-impact air bag is mounted in the dashboard above the glove box.
Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection.
Front passenger seat adult occupants who are properly seated and using the seat belt as out- lined in this manual should not cause the passen- ger air bag to be automatically turned OFF .
on the driver’s side of the instrument panel, will blink. Have the system checked by a NISSAN dealer. Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steer- ing wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel.
Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact and rollover supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain and roll- over air bags are located in the side roof rails.
WARNING ● Do not place any objects near the seat- back of the front seats. Also, do not place any objects (an umbrella, bag, etc .) between the front door finisher and the front seat. Such objects may become dangerous projectiles and cause injury if a side air bag inflates.
● If you need to dispose of a pretensioner or scrap the vehicle, contact a NISSAN dealer. Incorrect disposal procedures could cause personal injury. The pretensioner system activates in conjunction with the front air bag system.
SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circuits of the supplemental front-impact air bag, front seat-mounted side-impact supple- mental air bag, roof-mounted curtain side-impact and rollover supplemental air bag and seat belt pretensioner systems.
WARNING ● Once a front air bag, side air bag or curtain and rollover air bag has inflated, the air bag module will not function again and must be replaced. Addition- ally, if any of the front air bags inflate, the activated pretensioners must also be replaced.
2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 4 Speedometer and odometer .....................2 - 5 T achometer ....................................2 - 6 Engine coolant temperature gauge .
Center armrest storage (if so equipped) .......... 2-42 Glove box .................................... 2-42 Sunglasses holder (if so equipped) .............. 2-43 Map pockets .................................. 2-43 Seatback pocket (if so equipped) ...
1. V ents (P . 4-13) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-29) 3. Steering wheel switch for audio control/Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-54, P . 4-70) 4. Instrument brightness control (P . 2-32) 5.
16. Aux jack (if so equipped) (P . 4-52) 17. P ower outlet (P . 2-38) 18. Heated seat switch (if so equipped) (P . 2-35) 19. Cup holder (P . 2-45) 20. V ehicle dynamic control (VDC) off switch (P . 2-36) 21. T ow mode switch (P . 2-38) 22. Electronic locking rear differential (E-Lock) system switch (if so equipped) (P .
1. W arning/indicator lights 2. T achometer 3. Engine coolant temperature gauge 4. V oltmeter (if so equipped) 5. Fuel gauge 6. Speedometer 7. Automatic transmission fluid tempera- ture gauge (if so equipped) 8. Odometer/T win trip odometer/V ehicle Information Display 9.
1. Speedometer 2. Odometer/twin trip display 3. Change button SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position.
T ACHOMETER The tachometer indicates engine speed in revo- lutions per minute (rpm) . Do not rev the engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce en- gine speed. Operating the engine in the red zone may cause serious engine damage.
FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition switch is placed in the OFF position.
CAUTION ● This gauge is not designed to indicate low engine oil level. Use the dipstick to check the oil level. (See “Engine oil” in the “Maintenance and do-it-yourself” section.) ● If the gauge needle does not move with the proper amount of engine oil, have the vehicle checked by a NISSAN dealer.
CAUTION ● This gauge is not designed to indicate low automatic transmission fluid level. Use the dipstick to check the fluid level. (See “5-speed automatic transmission fluid” in the “Maintenance and do-it- yourself” section.
COMPASS DISPLAY Push the or button for about 1 sec- ond when the ignition switch is placed in the ON position to toggle the compass direction display 䊊 1 on or off.
Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1.
1. With the display turned on, press and hold the button for about 13 seconds or the for about 10 seconds. The “C” icon in the compass display will illuminate. 2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h) .
or Anti-lock Braking System (ABS) warning light Low fuel warning light High beam indicator light (Blue) Automatic transmission check warning light Low tire pressure warning light Malfunction indicator.
or Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off.
WARNING ● Y our brake system may not be working properly if the warning light is on. Driv- ing could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driv- ing it could be dangerous.
● If the gauge indicates engine coolant temperature over the normal range, stop the vehicle as soon as safely pos- sible. If the engine is overheated, con- tinued operation of the vehicle may se- riously damage the engine. See “If your vehicle overheats” in the “In case of emergency” section for immediate ac- tion required.
cally turn off when the tire pressure is ad- justed. After the tire is inflated to the rec- ommended pressure, the vehicle must be driven at speeds above 16 MPH (25 km/h) to activate the TPMS and turn off the low tire pressure warning light. Use a tire pres- sure gauge to check the tire pressure.
Seat belt warning light and chime The light and chime remind you to fasten your seat belts. The light illuminates whenever the ignition switch is placed in the ON or ST ART position and remains illuminated until the driver’s seat belt is fastened.
Front passenger air bag status light The front passenger air bag status light ( ) will be lit and the passenger front air bag will be OFF depending on how the right front passenger seat is being used.
CAUTION Continued vehicle operation without hav- ing the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission con- trol system. Security indicator light (if so equipped) This light blinks whenever the ignition switch is in the L OCK, OFF or ACC position.
The vehicle information display 䊊 1 is located to the left of the speedometer. It displays such items as: ● automatic transmission position indicator ● cruise control system information (if so e.
Warning mode (if so equipped) The warning mode can be selected to view any warnings that may be present. Once the screen is selected you have the option of skipping the warning or viewing it in detail. W arnings can be present for issues such as an open door or low fuel.
V ehicle information display warnings and indicators 1. Door open warning 2. Low fuel warning 3. Low windshield-washer fluid warning 4. Parking brake warning 5. Cruise main switch indicator (if so equipped) 6. Cruise set switch indicator (if so equipped) 7.
Door open warning This warning illuminates when a door has been opened and the engine is running. Low fuel warning This warning illuminates when the fuel level in the fuel tank is getting low . Refuel as soon as it is convenient, preferably before the fuel gauge reaches E (Empty) .
Check tire pressure warning This warning appears when the low tire pressure warning light in the meter illuminates and low tire pressure is detected. If this warning appears, stop the vehicle and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label.
K eyfob operation: ● Push the button on the keyfob. All doors lock. The hazard lights flash twice and the horn beeps once to indicate all doors are locked. ● When the button is pushed with all doors locked, the hazard lights flash twice and the horn beeps once as a re- minder that the doors are already locked.
3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key . If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring to avoid interference from other devices.
NO TE: Y ou can turn on or turn off the driving speed dependent intermittent wiper func- tion for vehicles with navigation system. Refer to “V ehicle electronic systems” in the “Display screen, heater, air conditioner, au- dio and phone systems” section later in this manual.
NO TE: If the rear power window (if so equipped) is lowered while the defroster switch is on, the rear window defroster will automati- cally shut off. The heated outside mirrors (if so equipped) will remain on. The rear win- dow defroster will automatically turn on when the rear power window is fully closed if the switch is on.
CAUTION Use the headlights with the engine run- ning to avoid discharging the vehicle battery. Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically .
T o turn on the autolight system: 1. T urn the headlight switch to the AUT O posi- tion 䊊 1 . 2. Place the ignition switch in the ON position. 3. The autolight system automatically turns the headlights on and off.
After the headlights automatically turn off with the headlight switch in the or position, the headlights will illuminate again for 5 minutes if the headlight switch is moved to the OFF position and then turned to the or position.
T URN SIGNAL SWITCH T urn signal 䊊 1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signals cancel automatically . Lane change signal 䊊 2 T o signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the lever does not latch.
Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road.
T o sound the horn, push the center pad area of the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. T am- pering with the supplemental front air bag system may result in serious personal injury.
The vehicle should be driven with the V ehicle Dynamic Control (VDC) system on for most driv- ing conditions. If the vehicle is stuck in mud or snow , the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor.
● Use the E-Lock system only when free- ing a stuck vehicle. T ry the 4LO position before using the E-Lock system. Never use the E-Lock system on a slippery road surface such as snow or ice sur- face.
T ow mode should be used when pulling a heavy trailer or hauling a heavy load. Driving the vehicle in the tow mode with no trailer/load or light trailer/light load will not cause any damage. How- ever, fuel economy may be reduced, and the transmission/engine driving characteristics may feel unusual.
The power outlets are for powering electrical accessories such as cellular telephones. The power outlets located on the driver’s side of the instrument panel and in the truck box are powered directly by the vehicle’s battery .
Do not use the outlet located in the truck box with accessories that exceed 12 volt, 120W (15A) power draw . Do not use double adapters or more than one electrical accessory . CAUTION For the power outlet located in the bed of the truck, do not use with accessories that exceed a 12 volt, 120W (15A) power draw.
Console box storage trays Console box storage Pull up on the lever 䊊 1 to open the console box lid 䊊 2 . Console box lock Use the master key to lock 䊊 1 or unlock 䊊 2 the console box.
CENTER ARMREST STORAGE (if so equipped) T o access the center armrest storage area, lower the center armrest and lift the lid. GLOVE BOX Open the glove box by pulling the handle. Use the master key to lock or unlock the glove box lock (if so equipped) .
SUNGLASSES HOLDER (if so equipped) T o open the sunglasses holder, push and release. WARNING ● Keep the sunglasses holder closed while driving to prevent an accident. CAUTION ● Do not use for anything other than sunglasses. ● Do not leave sunglasses in the sun- glasses holder while parking in direct sunlight.
SEATBACK POCKET (if so equipped) The seatback pocket is located on the back of the driver’s seat. The pocket can be used to store maps. OVERHEAD CONSOLE (if so equipped) Storage bins WARNING Keep storage bins closed while driving to help prevent injury in an accident or a sudden stop.
CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. ● Use only soft cups in the cup holder. Hard objects can injure you in an accident.
T o open the 2nd row cup holders (rear of front console) , lower the lid. T o close, raise the lid. Armrest (if so equipped) LIC0622 2nd row (rear of front console) (if so equipped) LIC0554 2nd row be.
CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid containers. GROCERY HOOKS (if so equipped) The grocery hooks allow for standard size plastic grocery bags to hang side by side.
LOCKABLE BEDSIDE STORAGE COMPARTMENT (if so equipped) T o access the bedside storage compartment, hold the key hole cover open and insert the master key . T urn the key clockwise to unlock the lid. The tray inside the bedside storage compartment is adjustable.
1. Window lock button 2. P ower door lock switch 3. Front passenger side automatic switch 4. Right rear passenger window switch 5. Left rear passenger window switch 6. Driver side automatic switch Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close the front and rear passenger windows.
Rear power window switch The rear power window switches open or close only the corresponding windows. T o open the window , push the switch and hold it down 䊊 1 .T o close the window , pull the switch up 䊊 2 . Locking passengers’ windows When the window lock button is depressed, only the driver’s side window can be opened or closed.
MANUAL WINDOWS (if so equipped) The side windows can be opened or closed by turning the hand crank on each door. REAR SLIDING WINDOW (if so equipped) Squeeze the handles of the lever 䊊 1 , then slide the window open 䊊 2 . REAR POWER WINDOW SWITCH (if so equipped) T o open the rear power window, push in and hold the switch.
NO TE: If the rear power window (if so equipped) is lowered while the defroster switch is on, the rear window defroster will automati- cally shut off. The heated outside mirrors (if so equipped) will remain on. The rear win- dow defroster will automatically turn on when the rear power window is fully closed if the switch is on.
Auto-reverse function (when closing or tilting down the moonroof) The auto-reverse function can be activated when the moonroof is closed or tilted down by auto- matic operation when the ignition switch is placed in the ON position or for about 45 sec- onds after the ignition switch is placed in the OFF position.
The interior light has a three-position switch and operates regardless of ignition switch position. When the switch is in the ON position 䊊 1 , the interior lights illuminate, regardless of door posi- tion. The lights will go off after about 15 minutes unless the ignition switch is placed in the ON position.
When the switch is in the OFF position 䊊 3 , the interior lights do not illuminate, regardless of door position. The puddle lights (if so equipped) and cargo light come on when any front or rear pas- senger door is opened.
T o turn the map lights on, press the switches. T o turn them off, press the switches again. CAUTION Do not use for extended periods of time with the engine stopped.
PROGRAMMING HOMELINK 姞 1. T o begin, press and hold the two outer HomeLink 姞 buttons (to clear the memory) until the indicator light 䊊 1 blinks (after 20 seconds) . Release both buttons. 2. P osition the end of the hand-held transmitter 1 - 3 inches (26 - 76 mm) away from the HomeLink 姞 surface.
7. Within 30 seconds of pressing and releas- ing the garage door opener’s program but- ton, quickly and firmly press and release the HomeLink 姞 button you’ve just programmed. Press and release the HomeLink 姞 button up to 3 times to complete the training.
REPROGRAMMING A SINGLE HOMELINK 姞 BUTTON T o reprogram a HomeLink 姞 Universal T ransceiver button, complete the following. 1. Press and hold the desired HomeLink 姞 but- ton.
MEMO 2-60 Instruments and controls.
3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN vehicle immobilizer system keys (if so equipped) ................................3 - 2 Doors ............................................3 - 3 Locking with key .
1. T wo master keys (black) with transpon- der chip (if so equipped) and chrome NISSAN brand symbol on one side 2. V alet key (black) with transponder chip (if so equipped) 3. K ey number plate 4. T ransponder chip (if so equipped) A key number plate is supplied with your keys.
When the doors are locked using one of the following methods, the doors can not be opened using the inside or outside door handles. The doors must be unlocked to open the doors.
Opening and closing windows The driver’s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. ● T o open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked.
Lockout protection When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the key in the ignition switch and any door open, all doors will lock and then unlock automatically . This helps to prevent the keys from being accidently locked inside the vehicle.
From the inside, pull the inside door handle to- ward you. The door will unlock automatically . 3. Open the door to the desired position. AUTOMATIC DOOR LOCKS (if so equipped) ● All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h) .
When the automatic door unlock system is deac- tivated, the doors do not unlock when the trans- mission is placed in the P (Park) position. T o unlock the door manually , use the inside lock knob or the power door lock switch (driver’s or front passenger’s side) .
Be sure to remove the key from the vehicle before locking the doors. The keyfob can operate at a maximum distance of approximately 33 ft (10 m) from the vehicle. The effective distance depends upon the conditions around the vehicle. As many as 5 keyfobs can be used with one vehicle.
● When the button is pressed with all doors locked, the hazard warning lights flash twice and the horn beeps once as a re- minder that the doors are already locked. ● If a door is open and you press the button, the doors will lock but the horn will not beep and the hazard warning lights will not flash.
Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pressing and holding the button on the keyfob for longer than 0.5 seconds. The panic alarm and headlights will stay on for 25 seconds.
NO TE: If you change the horn beep and light flash feature with the keyfob, the display screen (if so equipped) will not show the current mode and cannot be used to change the mode. Use the keyfob to return to the pre- vious mode and re-enable the display screen control.
FUEL-FILLER CAP WARNING ● Gasoline is extremely flammable and highly explosive under certain condi- tions. Y ou could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling.
● Failure to tighten the fuel-filler cap properly may cause the Mal- function Indicator Light (MIL) to illumi- nate. If the light illuminates be- cause the fuel-filler cap is loose or missing, tighten or install the cap and continue to drive the vehicle.
TILT OPERATION WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. Pull the lock lever forward and hold it to adjust the steering wheel up or down to the desired posi- tion. Release the lock lever to lock the steering wheel in place.
䊊 1 T o block glare from the front, swing down the main sun visor. 䊊 2 T o block glare from the side, remove the main sun visor from the center mount and swing the visor to the side. 䊊 3 T o block glare from the side and front, swing down the sub-sun visor (if so equipped) .
V ANITY MIRRORS (if so equipped) T o access the vanity mirror, pull the sun visor down and flip open the mirror cover (if so equipped) . Some vanity mirrors are illuminated and turn on when the mirror cover is open. REARVIEW MIRROR (if so equipped) The night position 䊊 1 reduces glare from the headlights of vehicles behind you at night.
AUTOMATIC ANTI-GLARE REARVIEW MIRROR (if so equipped) The inside mirror is designed so that it automati- cally dims during night time conditions and ac- cording to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is in the ON position.
T ype B With the ignition switch in the ON position, press the button as described: ● T o turn off the automatic anti-glare feature, press the button. The indicator light will turn off. ● T o turn on the automatic anti-glare feature, press the button again.
Electric control type (if so equipped) The outside mirror remote control will operate only when the ignition switch is placed in the ACC or ON position. Move the small switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 䊊 2 .
Pull the trailer tow mirror outward to extend it to the desired position for better visibility while tow- ing a trailer. WARNING Do not extend or retract mirrors while driv- ing. Y ou may lose control of your vehicle and cause an accident. CAUTION Driving in tight spaces with mirrors ex - tended may cause damage to the vehicle.
P ower folding outside mirrors (if so equipped) CAUTION Do not manually fold the power folding mirrors. Manually folding the mirrors can damage the mirrors. Push the switch to open or close the mirrors. If one of the mirrors are manually operated or bumped, the mirror body can become loose at the pivot point.
T AILGATE Opening the tailgate Pull the tailgate handle upward and lower the tailgate. The support cables hold the tailgate open. When closing the tailgate, make sure the latches are securely locked. Do not drive the vehicle with the tailgate down, unless equipped with NISSAN’s Bed Extender (accessory) or equivalent in the extended position.
Installing the tailgate 1. Insert the tailgate into the right side hinge. 2. Hold the tailgate at a 45 degree angle and insert into the left side hinge. 3. Continue to hold the tailgate at a 45 degree angle and attach the tailgate support cables. 4. Close the tailgate securely .
WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury.
3. Adjust the driver’s seat, accelerator and brake pedals, and outside mirrors to the desired positions by manually operating each adjusting switch. For additional infor- mation, see “Seats” in .
The driver’s seat, accelerator and brake pedals, and outside mirrors will move to the memorized position with the indicator light blinking, and then the light will stay on for approximately 5 seconds.
MEMO Pre-driving checks and adjustments 3-27.
4 Display screen, heater, air conditioner, audio and phone systems Control panel buttons (if so equipped) ...............4 - 2 How to use the joystick and ENTER button ........4 - 3 How to use the BACK button . ...................4 - 3 Setting up the start-up screen .
Playing a digital video disc (DVD) ............... 4-60 Care and maintenance ......................... 4-63 How to handle the DVD ........................ 4-63 Car phone or CB radio ............................ 4-66 Bluetooth 姞 Hands-Free Phone System (if so equipped) .
WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock.
9. GUIDE VOICE button* 10. zoom out button* 11. zoom in button* *For Navigation system control buttons, refer to the separate Navigation System Owner’s Manual (if so equipped) . CAUTION ● The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object.
HOW TO USE THE TRIP BUTTON When the TRIP button is pressed, the following modes will display on the screen. W arning message (if any) → TRIP 1 → TRIP 2 → FUEL ECONOMY → MAINTENANCE → Audio o.
Resetting fuel economy The average fuel economy calculation can be reset to 0. Press the TRIP button repeatedly until the FUEL ECONOMY menu is shown, then ei- ther: ● Select the “Reset” key on screen by press- ing the ENTER button, or ● Press the TRIP button for more than approxi- mately 1.
Resetting the maintenance interval The ENGINE OIL and TIRE RO T A TION mainte- nance intervals can be reset to 0 miles (kilome- ters) . Select the “Reset” key using the joystick and press the ENTER button.
Tire pressure information T o display tire pressure information, press the TRIP button repeatedly until the MAINTENANCE screen is displayed. Select the “Tire Pressure” key using the joystick and press the ENTER but- ton. Pressure indication in ** psi on the screen indi- cates that the pressure is being measured.
Display settings Select the “Display” key and press the ENTER button. The DISPLA Y SETTINGS screen will ap- pear. Brightness/contrast : Select the “Brightness/Contrast” key to adjust the brightness and contrast of the map back - ground. Use the joystick to adjust the brightness to darker or brighter and the contrast to lower or higher.
T o turn the screen on, ● Press the SETTING button and select the “Display” key and then select the “Display Off” key. Then set the screen to on by press- ing the ENTER button, or ● Hold t.
NO TE: If you change the horn beep or the lamp flash feature with the keyfob, the display screen will not show the current mode. Use the keyfob to return to the previous mode and re-enable the display screen control.
Y ou can select the language and unit using the joystick or pressing the ENTER button. The settings are automatically saved when you exit the menu by pressing the BACK button or any other mode button. Clock Adjusting the time: Select the “Hours” or “Minutes” key and move the joystick to the right or left to adjust the time.
Adjusting the time to the GPS: Select the “ Auto Adjust” key. The time will be reset to the GPS time. Selecting the time zone: 1. Select the “Select Time Zone” key . The TIME Z ONE screen will appear. 2. Select one of the following zones, depend- ing on the current location.
The GPS time (manual time) corresponding to the selected zone will be displayed. Pacific zone has been set as the initial (default) setting. Beep setting With this option ON, a beep will sound if any audio button is pressed. Navigation settings Refer to the separate Navigation System Own- er’s Manual for information regarding these set- tings.
WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
MAX A/C — Air flows from center and side vents with maximum cooling (air conditioning) . — Air flows from center and side vents. — Air flows from center and side vents and the front and rear floor outlets. — Air flows mainly from the front and rear floor outlets.
Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. 1. T urn the air flow control dial to the position. 2. T urn the fan control dial to the desired position. 3. T urn the temperature control dial to the de- sired position between the middle and the hot position.
The air conditioner cooling function oper- ates only when the engine is running. Cooling This mode is used to cool and dehumidify the air. 1. Press the button to the OFF position. 2. Press the air flow control button. 3. T urn the fan control dial to the desired posi- tion.
T ype A WHA0916 T ype A WHA0917 4-18 Display screen, heater, air conditioner, audio and phone systems.
T ype A WHA0918 T ype A WHA0919 Display screen, heater, air conditioner, audio and phone systems 4-19.
T ype A WHA1362 4-20 Display screen, heater, air conditioner, audio and phone systems.
WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
— Air flows mainly from the front and rear floor outlets. — Air flows from defroster outlets and the front and rear floor outlets. — Air flows mainly from defroster outlets. The air flow control dial also has intermediate positions which allow the air flow to be distrib- uted between 2 of the icon positions on the air flow control dial.
2. T urn the air flow control dial to the position. 3. T urn the fan control dial to the desired posi- tion. 4. T urn the temperature control dial to the de- sired position. Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows.
AIR CONDITIONER OPERATION Start the engine, turn the fan control dial to the desired position, and push in the button to activate the air conditioner. When the air condi- tioner is on, cooling and dehumidifying functions are added to the heater operation.
AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. For additional information on heating and cooling see “Heater and air con- ditioner” in this section. The air recirculation ( ) button should always be in the OFF position for heating and defrosting.
T ype B WHA1080 T ype B WHA1081 4-26 Display screen, heater, air conditioner, audio and phone systems.
T ype B WHA1082 T ype B WHA1471 Display screen, heater, air conditioner, audio and phone systems 4-27.
1. Driver temperature control dial 2. A/C ON/OFF button 3. Front window defroster button 4. Fan speed control dial 5. System OFF button 6. Rear window defroster button 7. Air recirculation button 8. Passenger temperature control dial 9. DUAL button 10.
● The temperature of the passenger compart- ment will be maintained automatically . Air flow distribution, fan speed and A/C on/off are also controlled automatically . ● A visible mist may be seen coming from the vents in hot, humid conditions as the air is cooled rapidly .
The sunload sensor 䊊 1 , located on the top center of the instrument panel, helps the system main- tain a constant temperature. Do not put anything on or around this sensor. The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind.
Reception conditions will constantly change be- cause of vehicle movement. Buildings, terrain, signal distance and interference from other ve- hicles can work against ideal reception. De- scribed below are some of the factors that can affect your radio reception.
AUDIO OPERATION PRECAUTIONS Compact disc (CD) player CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD changer.
CHECK DISC: ● Confirm that the CD is inserted cor- rectly (the label side is facing up, etc .) . ● Confirm that the CD is not bent or warped and it is free of scratches. PRESS EJECT: This is an error due to excessive tem- perature inside the player.
Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed.
Specification chart : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.
1. PRESET A·B·C button 2. CD eject button 3. MENU button 4. CD insert slot 5. CD button 6. FM·AM button 7. TUNE buttons 8. RPT button 9. PWR button/VOL control knob 10.
T o adjust Bass, T reble, Fade and Balance, press the MENU button until the desired mode appears in the display . Press the SEEK button to adjust Bass and T reble to the desired level. Y ou can also use the SEEK button to adjust Fade and Balance modes.
TUNE buttons: Manual tuning Press the TUNE or button for less than 0.5 seconds for manual tuning. T o move quickly through the channels, press and hold either TUNE or button down for more than 1.5 seconds. SEEK buttons: SEEK tuning Press the SEEK or button to seek through the frequencies.
SEEK (Scan CDs) button: Press and hold the SEEK button for more than 1.5 seconds to scan through the first 10 seconds of a track on the compact disc. The SCAN icon is flashed during scan mode. The scan mode is canceled once it scans through all the tracks on the disc, or if the SEEK or button is pressed during the scan mode.
1. SEEK/TRACK button 2. TUNE/FOLDER·CA T button 3. DISP button 4. SCAN RPT button 5. PRESET A·B·C button 6. CD·DVD button 7. RADIO button* 8. AUX button 9. REAR ON·OFF button 10. speaker control button 11. L OAD button 12. CD insert slot 13. CD eject button 14.
1. SEEK/TRACK button 2. TUNE/FOLDER·CA T button 3. DISP button 4. SCAN RPT button 5. PRESET A·B·C button 6. CD button 7. FM button 8. AM button 9. SA T (satellite) button* 10. AUX button 11. L OAD button 12. CD insert slot 13. CD eject button 14. POWER/VOLUME control knob 15.
1. SEEK/TRACK button 2. TUNE/FOLDER·CA T button 3. Display 4. SCAN button 5. RPT RDM button 6. H/M button (clock set buttons) 7. PRESET A·B·C button 8. CD button 9. FM AM button 10. SA T (satellite) radio button* 11. AUX button 12. DISP button 13. L OAD button 14.
1. SEEK/TRACK button 2. TUNE/FOLDER·CA T button 3. Display 4. SCAN RPT button 5. DISP button 6. H/M button (clock set buttons) 7. PRESET A·B·C button 8. CD·DVD button 9. RADIO button* 10. AUX button 11. REAR ON·OFF button 12. speaker control button 13.
1. PRESET A·B·C button 2. Display 3. DISP/CL OCK button 4. SEEK/TRACK button 5. CD button 6. RADIO button* 7. AUX button 8. SCAN RPT button 9. CA T FOLDER button 10. CD L OAD button 11. CD insert slot 12. CD eject button 13. PWR/VOL (power/volume) control knob 14.
FM/AM/SA T RADIO WITH COMPACT DISC (CD) CHANGER (T ype A , B, C, D and E) (if so equipped) For all operation precautions, see “ Audio opera- tion precautions” earlier in this section.
The display will return to the regular clock display after 7 seconds, or you may press the DISP/CL OCK button again to return to the regu- lar clock display . For setting the clock on T ype A and B audio systems see “ Adjusting the time” in this section.
Display satellite radio display mode (if so equipped) T o change the text displayed when listening to satellite radio (if so equipped) press the DISP button. The DISP button will scroll through the broadcast information as follows: Name ←→ Title ←→ Current display mode.
TUNE/FOLDER·CA T button (T ype A , B , C and D only) : Manual tuning T o manually tune the radio, press the TUNE/FOLDER·CA T button or ,o r turn the tuning knob to right or left. T o move quickly through the channels, press and hold either the or button down for more than 1.
Radio data system (RDS) : RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band) . Cur- rently , most RDS stations are in large cities, but many stations are now considering broadcasting RDS data.
back through tracks. The compact disc will go back the number of times the button is pressed. When the button is pressed while the compact disc is playing, the next track will start to play from its beginning. Press several times to skip through tracks.
REAR ON·OFF (if so equipped) : Pressing the REAR ON·OFF button for less than 1.5 seconds turns the rear seat audio controller on. REAR CONT ON will display . Pressing it again will turn the rear seat audio controller off. REAR CONT OFF will display .
CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth.
1. V olume control switch 2. Phone operation switch 3. P ower on and MODE select switch 4. T uning switch STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the steering wheel.
1. VOL (volume) control button 2. MODE select button 3. speaker control button 4. NEXT button 5. SEEK button 6. Headphone jacks 7. Infrared headphone transmitter lens* *Red transmitters will be visible when infrared headphones are on.
VOL (volume) button: The VOL button allows the rear passengers to adjust the headphone volume level. The vehicle volume can also be changed if the REAR CTRL is enabled and the rear audio mode is the same as the front. (SPEAKER CONTROL) button: Press this button to turn the rear speakers off and headphones on.
CAUTION ● The glass screen on the liquid crystal display may break if hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water.
1. POWER button 2. ST OP button 3. NEXT TRACK/CHAPTER and PREVI- OUS TRACK/CHAPTER button 4. TITLE button 5. ENTER button 6. DISPLA Y button 7. MODE button 8. SUBTITLE button 9. AUDIO button 10. ANGLE button 11. CLEAR button 12. P AUSE button 13. PLA Y button 14.
● The screen rotates down to view and up into the housing to store when not in use. Ensure that the screen is latched securely into the housing when stored. Headphones Power ON/OFF: Press the power button to turn the headphones on or off. V olume control: T urn the volume control knob to adjust the vol- ume.
PLAYING A DIGITAL VIDEO DISC (DVD) CAUTION ● Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery. ● Do not allow the system to get wet. Excessive moisture such as spilled liq- uids may cause the system to malfunction.
FF (Fast Forward) , REW (Remote control only) : Press the F AST FORW ARD/FAST REVERSE buttons to carry out the fast forward or fast re- verse presentation at 5 times normal play speed. Press the F AST FORW ARD/FAST REVERSE buttons again or PLA Y button to resume the normal play speed.
If the DISPLA Y control button on the faceplate is pressed for more than 2 seconds, the media track/time information will be displayed along the bottom of the display . Pressing the DISPLA Y control for more than 2 seconds will remove the media track/time information from the display .
Use the “ ≥ 10” button to input numbers greater than or equal to 10. Up to three digits can be inputted when selecting the chapter/title/track number. The subsequent actuation of numeric buttons will continuously shift the previously input number to the “left” .
● A new disc may be rough on its inner and outer edges. Remove the rough edges using the side of a pen or pencil as illustrated. ● Never attempt to use a DVD that has been cracked, deformed, or repaired using adhesive. Doing so may cause damage to the equipment.
Remote control and headphones battery replacement Replace the battery as follows: 1. Open the lid. 2. Replace batteries with new ones. ● Size AA (remote control) ● Size AAA (headphones) Make sure that the and ends on the batteries match the markings inside the compartment.
When installing a CB, ham radio or car phone in your NISSAN, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular telephone should not be used while driving so full attention may be given to vehicle operation.
Y our NISSAN is equipped with the Bluetooth 姞 Hands-Free Phone System. If you have a com- patible Bluetooth 姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module.
– Y our cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice dur- ing a call.
Operating tips T o get the best performance out of the NISSAN V oice Recognition system, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.
● Numbers can be spoken in small groups. The system will prompt you to continue en- tering digits, if desired. Example: 1-800-662-6200 – “One eight zero zero” The system repeats the numbers and prompts you to enter more. – “six six two” The system repeats the numbers and prompts you to enter more.
PHONE/END Press the button to cancel a VR session or end a call. GETTING STARTED The following procedures will help you get started using the Bluetooth 姞 Hands-Free Phone System with NISSAN V oice Recognition. For ad- ditional command options, refer to “List of voice commands” in this section.
4. Say: “New phone” 䊊 C . The system acknowl- edges the command and asks you to initiate pairing from the phone handset 䊊 D . The pairing procedure of the cellular phone varies according to each cellular phone model. See the cellular phone Owner’s Manual for details.
For additional command options, see “List of voice commands” later in this section. LIST OF VOICE COMMANDS Main Menu “Call” or “Call International” “Phone Book” “Memo Pad” “Setup” When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu.
If a redial number does not exist, the system announces, “There is no number to redial” and ends the VR session. “Call back” 䊊 D Use the Call Back command to dial the number of the last incoming call within the vehicle. The system acknowledges the command, re- peats the number and begins dialing.
NO TE: Each phone has its own separate phone book. Y ou cannot access Phone A’s phone book if you are currently connected with Phone B . “New entry” 䊊 A Use the New Entry command to store a new name in the system. When prompted by the system, say the name you would like to give the new entry .
The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s Manual for details. Y ou can also visit www .nissanusa.com/bluetooth for instructions on transferring phone numbers from NISSAN recommended cellular phones.
“Setup” Main Menu “Setup” “Pair Phone” 䊊 A “List Phone” 䊊 B “Select Phone” 䊊 C “Change Priority” 䊊 D “Delete Phone” 䊊 E “Select Ringtone” 䊊 F “Bluetooth Off” 䊊 G Use the Setup command to change options as- sociated with the Bluetooth 姞 Hands-Free Phone System.
For example, if the current priority levels are: Priority Level 1 = Phone A Priority Level 2 = Phone B Priority Level 3 = Phone C and you change the priority level of Phone C to Level 1, then: Priorit.
speaker adaptation mode or press the PHONE/END ( ) button to select a dif- ferent language.” 5. Press the button. For information on selecting a different lan- guage, see “Choosing a language” earlier in this section. 6. V oice memory A or memory B is selected automatically .
T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 On-pavement and off-road driving precautions ..............
WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
WARNING ● If the low tire pressure warning light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Driving with under- inflated tires may permanently damage the tires and increase the likelihood of tire failure.
For Canada: This device complies with RSS-210 of In- dustry Canada. Operation is subject to the following two conditions: 1. This device may not cause interfer- ence, and 2. This device must accept any interfer- ence, include interference that may cause undesired operation of the de- vice.
Help prevent rapid air pressure loss by maintain- ing the correct air pressure and visually inspect the tires for wear and damage. See “Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual.
Please observe the following precautions: WARNING ● Drive carefully when off the road and avoid dangerous areas. Every person who drives or rides in this vehicle should be seated with their seat belt fastened. This will keep you and your passengers in position when driving over rough terrain.
● Do not attempt to test a 4WD equipped vehicle on a 2-wheel dynamometer (such as the dynamometers used by some states for emissions testing) , or similar equipment even if the other two wheels are raised off the ground. Make sure you inform test facility personnel that your vehicle is equipped with 4WD before it is placed on a dynamometer.
AUTOMATIC TRANSMISSION The ignition lock is designed so the ignition switch cannot be placed in the L OCK position and the key cannot be removed until the shift selector is moved to the P (Park) position. When removing the key from the ignition switch, make sure the shift selector is in the P (Park) position.
K EY POSITIONS L OCK: Normal parking position (0) OFF: (Not used) (1) ACC: (Accessories) (2) This position activates electrical accessories such as the radio when the engine is not running. ON: Normal operating position (3) This position turns on the ignition system and the electrical accessories.
1. Apply the parking brake. 2. Move the shift selector to P (Park) or N (Neutral) . P (Park) is recommended. The shift selector cannot be moved out of P (Park) and into any of the other gear positions if the ignition switch is turned to the OFF position or if the key is removed from the ignition switch.
If: 1. The engine coolant temperature is not re- duced. 2. The air conditioning cooling function does not turn back ON. 3. The engine oil pressure low/engine coolant temperature high warning light illumi- nates, this may indicate a malfunction. Move the vehicle off the road in a safe area and allow the engine to cool.
The recommended operating procedures for this transmission are shown on the following pages. Follow these procedures for maximum vehicle performance and driving enjoyment. Starting the vehicle 1. After starting the engine, fully depress the foot brake pedal before moving the shift selector out of the P (Park) position.
R (Reverse) : CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position.
T o move the shift selector: : Shift while depressing the brake pedal : Shift without depressing brake pedal Shifting – column After starting the engine, fully depress the brake pedal and move the shift selector out of the P (Park) position.
Manual shift mode When the manual shift mode button 䊊 A is pressed while driving, the transmission enters the manual shift mode. Shift ranges can be selected manually . In the manual shift mode, the shift range is dis- played on the position indicator in the meter.
When canceling the manual shift mode: Press the manual shift mode button 䊊 A to return the transmission to the normal driving mode. ● In the manual shift mode, the transmis- sion may not shift to the selected gear immediately because of vehicle speed.
5. Use a protective cloth on the end of a small screwdriver before inserting it in the shift lock release slot and pushing down. 6. Move the shift selector to the N (Neutral) position while holding down the shift lock release.
T o engage: Firmly depress the parking brake. T o release: 1. Firmly apply the foot brake. 2. Move the shift selector to the P (Park) posi- tion. 3. Firmly depress the parking brake pedal and it will release. 4. Before driving, be sure the brake warning light goes out.
CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed be- tween 25 - 89 MPH (40 - 144 km/h) without keeping your foot on the accelerator pedal. T o turn on the cruise control, push the ON·OFF switch on. The CRUISE indicator light in the vehicle information display will illuminate.
CAUTION During the first 1,200 miles (2,000 km) , follow these recommendations to obtain maximum engine performance and en- sure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in short- ened engine life and reduced engine performance.
WARNING ● For 4WD equipped vehicles, do not at- tempt to raise two wheels off the ground and shift the transmission to any drive or reverse position with the engine running. Doing so may result in drivetrain damage or unexpected ve- hicle movement which could result in serious vehicle damage or personal injury.
T RANSFER CASE SHIFTING PROCEDURES The part time 4WD system provides 3 positions (2WD, 4H and 4L O) , so you can select the desired drive mode according to the driving conditions.
1. T urn off the engine by turning the ignition switch ⬙ OFF ⬙ . 2. Start the engine. - Check that the 4WD warning light turns off. If the 4WD light illuminates, have the system checked by a NISSAN dealer. 3. Apply the parking brake, depress the brake pedal and move the shift selector to Neutral position.
The transfer case 4WD shift switch is used to select either 2WD or 4WD depending on the driving conditions. There are three types of drive modes available, 2WD, 4H and 4L O. The 4WD shift switch electronically controls the transfer case operation. Rotate the switch to move between each mode, 2WD, 4H and 4L O.
● If it is difficult to free the vehicle, rock the vehicle back and forth between reverse and drive gears. ● If the vehicle is stuck deep in mud, place stones or wooden blocks under the tires. Then try the recovery procedures above. Tire chains may be effective.
4WD shift indicator light The 4WD shift indicator light is located in the vehicle information display . The light should turn off within 1 second after turning the ignition switch to the ON position. While the engine is running, the 4WD shift indi- cator light will illuminate the position selected by the 4WD shift switch.
● When the warning light comes on, the 2WD mode may be engaged even if the 4WD shift switch is in 4H . Be especially careful when driving. If corresponding parts are malfunctioning, the 4WD mode will not be engaged even if the 4WD shift switch is shifted.
CAUTION ● After using the E-Lock system, turn the switch OFF to prevent possible damage to driveline components from extended use. ● Do not drive the vehicle at speeds faster than 12 mph (20 km/h) when the system is engaged. Doing so could damage drivetrain components.
● HEADED DOWNHILL WITH CURB: 䊊 A T urn the wheels into the curb and move the vehicle forward until the curb side wheel gently touches the curb. ● HEADED UPHILL WITH CURB: 䊊 B T urn the wheels away from the curb and move the vehicle back until the curb side wheel gently touches the curb.
WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not work.
WARNING Do not pump the brake pedal. Doing so may result in increased stopping distances. Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer.
WARNING ● The ABLS system helps provide in- creased traction, but will not prevent accidents due to abrupt steering opera- tion or by careless driving or dangerous driving practices. Reduce vehicle speed and be especially careful when driving and cornering on slippery surfaces.
When the VDC switch is used to turn off the system, the VDC system still operates to prevent one drive wheel from slipping by transferring power to a non slipping drive wheel. The SLIP indicator flashes if this occurs. All other VDC functions are off and the SLIP indicator will not flash.
WARNING ● Always turn and look back before back - ing up. The RSS is not a substitute for proper backing procedures. ● Read and understand the limitations of the rear sonar system as contained in this section. Inclement weather may af- fect the function of the RSS; this may include reduced performance or a false activation.
FREEING A FROZEN DOOR LOCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry keyfob (if so equipped) .
SPECIAL WINTER EQUIPMENT It is recommended that the following items be carried in the vehicle during winter: ● A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades. ● A sturdy , flat board to be placed under the jack to give it firm support.
T o use the engine block heater: 1. T urn the engine off. 2. Open the hood and unwrap the engine block heater cord. 3. Plug the engine block heater cord into a grounded 3-wire, 3-pronged extension cord. 4. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110- volt AC (V AC) outlet.
MEMO 5-40 Starting and driving.
6 In case of emergency Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) ..........6 - 2 Changing a flat tire .............................6 - 2 Jump starting .....................................6 - 8 Push starting .
TIRE PRESSURE MONITORING SYSTEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare.
WARNING ● Make sure the parking brake is securely applied and the automatic transmission is shifted into P (Park) . ● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. ● Never change tires if oncoming traffic is close to your vehicle.
2. Unscrew and remove the jack and tool kit. 3. Assemble the two pieces of the jack rod. Find the oval-shaped opening above the middle of the license plate. Pass the T -shaped end of the jack rod through the opening and direct it toward the spare tire winch, located directly above the spare tire.
CAUTION Be sure to center the spare tire suspend- ing plate on the wheel and then lift the spare tire. Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands.
2. Place the jack directly under the jack -up point as illustrated so the top of the jack contacts the vehicle at the jack -up point. The jack -up points are indicated by stamped ar- rows on the side of the frame. The jack should be used on firm and level ground.
Installing the spare tire The spare tire is designed for emergency use. See specific instructions under the heading “ Wheels and tires” in the “Mainte- nance and do-it-yourself” section of this manual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub.
WARNING ● Always make sure that the spare tire and jacking equipment are properly se- cured after use. Such items can become dangerous projectiles in an accident or sudden stop.
WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other.
WARNING Do not push start this vehicle. The three- way catalyst may be damaged. CAUTION Automatic transmission models cannot be push-started or tow-started. Attempt- ing to do so may cause transmission damage. WARNING ● Do not continue to drive if your vehicle overheats.
6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary . Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed.
T OWING RECOMMENDED BY NISSAN T wo-wheel drive models NISSAN recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated.
Four-wheel drive models NISSAN recommends that towing dollies be used when towing your vehicle or place the ve- hicle on a flat bed truck as illustrated. CAUTION Never tow 4WD models with any of the wheels on the ground as this may cause serious and expensive damage to the transfer case and transmission.
● Attach recovery devices only to main structural members of the vehicle or the recovery hooks. ● Do not use the vehicle tie-downs to tow or free a stuck vehicle. ● Only use devices specifically designed for vehicle recovery and follow the manufacturer’s instructions.
7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody .
In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads.
REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store.
Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth damp- ened in mild soap solution, then wipe clean with a dry , soft cloth.
Floor mat positioning aid This vehicle includes two driver’s side front floor mat brackets and one passenger’s side front floor mat bracket to help keep your floor mats in place. Genuine NISSAN floor mats have been specially designed for your vehicle model.
T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process.
8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . .....................
Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance.
When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely .
Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange noises. Warning lights and chimes Make sure all warning lights and chimes are operating properly . Windshield wiper and washer* Check that the wipers and washer operate properly and that the wipers do not streak.
When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle.
1. Battery 2. Fuse/fusible link box 3. T ransmission dipstick 4. Engine oil filler cap 5. Brake fluid reservoir 6. Windshield-washer fluid reservoir 7. Air cleaner 8. Drive belt location 9. Radiator cap 10. P ower steering fluid reservoir 11. Engine oil dipstick 12.
The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% water to provide year-round anti-freeze and coolant protection. The antifreeze solution con- tains rust and corrosion inhibitors.
CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level, add coolant to the MAX level. If the reservoir is empty , check the coolant level in the radiator when the engine is cold.
CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan.
CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 3. Remove the oil filler cap 䊊 A by turning it counterclockwise. 4.
CHANGING ENGINE OIL FILTER 1. Park the vehicle on a level surface and apply the parking brake. 2. T urn the engine off. 3. Place a large drain pan under the oil filter 䊊 A . 4. Loosen the oil filter 䊊 A with an oil filter wrench by turning it counterclockwise.
The fluid level should be checked using the HO T MAX range on the power steering fluid reservoir at fluid temperatures of 122° - 176°F (50° - 80°C) or using the COLD MAX range on the power steering fluid reservoir at fluid tempera- tures of 32° - 86°F (0° - 30°C) .
BRAKE FLUID Check the brake fluid level in the reservoir. If the fluid level is below the MIN line or the brake warning light comes on, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DO T 3 fluid up to the MAX line. If fluid must be added frequently , the system should be checked by a NISSAN dealer.
● K eep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge.
2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. Reinstall the vent caps. V ehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level.
The current sensor 䊊 A is located near the battery along the negative battery cable. If you add elec- trical accessories to your vehicle, be sure to ground them to a suitable body ground such as the frame or engine block area. 1. P ower steering fluid pump 2.
REPLACING SPARK PLUGS Platinum-tipped spark plugs It is not necessary to replace platinum-tipped 䊊 A spark plugs as frequently as conventional type spark plugs because they last much longer. Fol- low the maintenance log shown in the “NISSAN Service and Maintenance Guide” .
NO TE: After installing a new air cleaner, make sure the air cleaner cover is seated in the housing and latch the clips. WARNING ● Operating the engine with the air cleaner removed can cause you or oth- ers to be burned. The air cleaner not only cleans the air, it stops the flame if the engine backfires.
2. Remove the filter cover bolt and remove the filter cover. NO TE: The filters are marked with air flow arrows. The end of the filter with the arrow should face the rear of the vehicle. The arrows should face downward. 3. Insert the first filter into the housing and slide it over to the right.
REPLACING Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 䊊 2 Push the release tab, then move the wiper blade down the wiper arm to remove. 䊊 3 Remove the wiper blade. 4. Insert the new wiper blade onto the wiper arm until it clicks into place.
If the brakes do not operate properly , have the brakes checked by a NISSAN dealer. Self-adjusting brakes Y our vehicle is equipped with self-adjusting brakes.
If a type A fuse is used to replace a type B fuse, the type A fuse will not be level with the fuse pocket as shown in the illustration. This will not affect the performance of the fuse. Make sure the fuse is installed in the fuse box securely . T ype B fuses cannot be installed in the under- hood fuse boxes.
5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links.
5. If the fuse is open 䊊 A , replace it with an equivalent good fuse 䊊 B . 6. Push the fuse box cover to install. 7. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. CAUTION Be careful not to allow children to swallow the battery or removed parts.
K EYFOB (if so equipped) Replace the battery in the keyfob as follows: 䊊 1 Open the lid using a coin 䊊 A . 䊊 2 Remove the battery 䊊 B . 䊊 3 Install a new battery 䊊 C with the “+” facing down. ● Hold the battery by the edges. Holding the battery across the contact points will seri- ously deplete the storage capacity .
FCC Notice: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment.
● Do not leave the bulb out of the fog light for a long period of time as dust, mois- ture and smoke may enter the fog light body and affect the performance of the fog light. 1. Disconnect the negative (-) battery cable. 2. The fog light is accessible in front of the front tire and behind the bumper.
EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No. Headlight assembly High 65 9005 (HB3) Low 55 9006 (HB4) Park/T urn 28/8 3457K Sidemarker 3.8 194 Side turn signal light* (if so equipped) — LED Front fog light (if so equipped) 27.
1. Room/map light (if so equipped) 2. Personal lights (if so equipped) 3. Step light (if so equipped) 4. Puddle light/Side turn signal light (if so equipped) 5. High-mount stoplight/cargo lights 6. License plate light 7. Rear combination/tailgate light (if so equipped) assembly 8.
Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Personal lights (If so equipped) LDI0364 V anity mirror (If so equipped) L.
Use a cloth 䊊 1 to protect the housing. If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. Puddle light (If so equipped) LDI0388 License plate lig.
TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all 4 tires except the spare.
WARNING ● Improperly inflated tires can fail suddenly and cause an accident. ● The Gross V ehicle Weight Rating (GVWR) is located on the F .M .V .S.S./C .M.V.S.S. certifica- tion label. The vehicle weight ca- pacity is indicated on the Tire and Loading Information label.
Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See loading infor- mation in the “T echnical and con- sumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factory .
Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.
TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information iden- tifies and describes the fundamental characteristics of the tire and also pro- vides the tire identification number (TIN) for safety standard certification.
䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number.
䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown.
Generally , snow tires have lower speed ratings than factory equipped tires and may not match the potential maximum vehicle speed. Never ex- ceed the maximum speed rating of the tire. If you install snow tires, they must be the same size, brand, construction and tread pattern on all four wheels.
Wheel nut tightening torque: 98 ft-lb (133 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure.
Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual.
If excessive tire wear is found, it is recommended that all four tires be replaced with tires of the same size, brand, construction and tread pattern. The tire pressure and wheel alignment should also be checked and corrected as necessary . Contact a NISSAN dealer.
9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation (without Flexible Fuel V ehicle option) ..............9 - 3 Flexible fuel vehicle (FFV) fuel recommendation (if so equipped) ..........
The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity.
FUEL RECOMMENDATION (without Flexible Fuel V ehicle option) Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Only vehicles with the E-85 filler door label can operate on E-85.
T ake care not to spill gasoline during refu- eling. Gasoline containing oxygenates can cause paint damage. E–85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel V ehicle (FFV) .
General information This information is for Flexible Fuel vehicles (FFV) only . FFV vehicles can be identified by the fuel filler door label that states Ethanol (E-85) or Unleaded Gasoline Only . This section only cov- ers those subjects that are unique to Flexible Fuel vehicles.
ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section.
Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval.
ENGINE Model VK56DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 8-cylinder, V-block, Slanted at 90° Bore x Stroke in (mm) 3.858 x 3.622 (98 x 92) Displacement cu in (cm 3 ) 338.78 (5,552) Firing order 1–8–7–3–6–5–4–2 Idle speed No adjustment is necessary.
WHEELS AND TIRES Wheels 18 x 8.0J 20 x 8.0J Tires P265/70R18 P275/70R18 P275/60R20 Spare tire Full size DIMENSIONS AND WEIGHTS Overall length Short wheel base (SWB) in (mm) 224.6 (5,704) Long wheel base (L WB) in (mm) 244.3 (6,204) Overall width in (mm) 79.
When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICATION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .
TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown.
WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts.
Do not exceed the load limit of your ve- hicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label (if so equipped) . Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Loading Information label (if so equipped) .
Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
WARNING ● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or col- lision, unsecured cargo could cause personal injury. ● Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs.
Check the tightness of the tie-down cleat peri- odically during a trip to make sure the center bolt has not become loose. Install the tie-down cleat as follows: 1. Remove the channel protectors by sliding them out the back of the truck bed. Properly store the channel protectors.
5. There should be no gap between the bottom of the cleat and the top of the channel. Tighten the center bolt hand tight (20-40 inch pounds) . WTI0124 9-18 T echnical and consumer information.
CAUTION ● Install only one cleat per section of channel. ● Applying loads at angles to the cleats greater then 45° or loads greater than 150 lbs. (header and floor channels) or 200 lbs.
WARNING Do not install accessories over the gap between the front and rear side channels. Doing this could affect the rear structure in certain rear impacts, which could result in serious injury. CAUTION Properly secure all cargo with ropes or straps to prevent it from sliding or shifting.
Install the channels end stoppers as follows: 1. Remove the channel protectors by sliding them out the back of the truck bed. Properly store the channel protectors. 2. Loosen the bolt on the center of the end stopper with the provided wrench and insert it into the channel.
CREW CAB MODELS Crew Cab short wheel base models should not be used to carry a slide-in camper. KING CAB MODELS This information is provided for you to properly install a slide-in camper and is based on the National Highway T raffic Safety Administration regulations.
When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the camper manufacturer’s weight figure, plus: ● the weight of installed additional camper equipment not included in the camper manufacturer’s weight figure, ● the weight of camper cargo, ● and the weight of occupants in the camper.
WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged.
T emperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease engine power.
Maximum Gross V ehicle W eight (GVW)/maximum Gross Axle W eight (GA W) The GVW of the towing vehicle must not exceed the Gross V ehicle Weight Rating (GVWR) shown on the F .
● Gross V ehicle Weight Rating (GVWR) from F .M.V.S.S./C.M.V .S.S. certification label - 7,100 lb. (3221 kg) . ● Gross Combined W eight Rating (GCWR) from “T owing Load/Specification ⬙ chart - 15,100 lb. (6849 kg) . ● Maximum T railer towing capacity from “T ow- ing Load/Specification ⬙ chart - 9,200 lb.
T OWING LOAD/SPECIFICATION T owing load specification chart with tow package — short wheel base 2WD 4WD KC CC KC CC SV SV SL SV Pro-4X SV Pro-4X SL Maximum T owing Capacity *1, *2, *3 9,500 lb. (4,309 kg) 9,400 lb. (4,263 kg) 9,200 lb. (4,173 kg) 9,400 lb.
T owing load specification chart without tow package — short wheel base 2WD 4WD KC CC KC CC S SV S SV SL S SV S SV SL Maximum T owing capacity*1, *2, *3 7,400 lb. (3,356 kg) 7,400 lb. (3,356 kg) 7,400 lb. (3,356 kg) 7,400 lb. (3,356 kg) 7,100 lb. (3,220 kg) 7,400 lb.
T OWING SAFETY T railer hitch Y our vehicle may be equipped with an optional trailer tow package. The trailer tow package in- cludes a receiver-type frame mounted hitch. This hitch is rated for the maximum towing capacity of this vehicle when the proper towing equipment is used.
Bumper towing The genuine NISSAN step bumper has provi- sions to install a trailer hitch ball and is designed to tow trailers of a maximum weight of 5,000 lb (2,268 kg) . T o install a trailer hitch ball cut out the circle in the center of the step bumper 䊊 A , then remove it to install the trailer hitch ball.
Sway control device Sudden maneuvers, wind gusts, and buffeting caused by other vehicles can affect trailer han- dling. Sway control devices may be used to help control these affects.
● Regularly check that all trailer hitch mounting bolts are securely mounted. ● When towing with the hitch ball mounted to the rear bumper, do not make sharp turns. The trailer may con- tact the bumper and cause damage to the bumper or trailer. ● When towing a 5th wheel trailer, do not make sharp turns while driving or back - ing.
Electric T railer Brakes - Electric braking sys- tems are activated by an electronic signal sent from a trailer brake controller (special brake- sensing module) . If electric trailer brakes are used, see ⬙ Electric trailer brake controller ⬙ in this section.
2. Apply the parking brake to access the jumper harness connector. 3. Locate the jumper harness connector under the lower portion of the instrument panel. The connector is taped to the wiring harness 䊊 1 as indicated. ● The connector is marked with a white tag with “elec brake conn” .
4. Peel off the tape and connect the jumper harness to the connector 䊊 2 . 5. Release the parking brake. 6. Install the aftermarket electric trailer brake controller according to the manufacturer’s instructions. Pre-towing tips ● Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched.
Always block the wheels on both vehicle and trailer when parking. Parking on a slope is not recommended; however, if you must do so: CAUTION If you move the shift selector to the P (Park) position before blocking the wheels and applying the parking brake, transmission damage could occur.
Do the following if the trailer begins to sway: 1. T ake your foot off the accelerator pedal to allow the vehicle to coast and steer as straight ahead as the road conditions allow . This com- bination will help stabilize the vehicle – Do not correct trailer sway by steering or applying the brakes.
FLAT TOWING T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION ● Failure to follow these guidelines can result in severe transmission damage.
WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristic s.
For USA If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway T raffic Safety Administration (NHTSA) in addi- tion to notifying NISSAN.
Due to legal requirements in some states and Canadian Provinces, your vehicle may be re- quired to be in what is called the “ready condi- tion” for an Inspection/Maintenance (I/M) test of the emission control system. The vehicle is set to the “ready condition” when it is driven through certain driving patterns.
A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. Filled with wiring diagrams, illustrations and step-by-step diagnostic and adjustment pro- cedures, this manual is the same one used by the factory-trained technicians working at NISSAN dealerships.
MEMO 9-44 T echnical and consumer information.
10 Index 4WD warning light .............. .2-16 A Active brake limited slip (ABLS) system (if so equipped) ................ .5-33 Adjusting pedal position ........... .3-14 Air bag (See supplemental restraint system) .................... .1-45 Air bag system Front (See supplemental front impact air bag system) .
Child restraints ...... .1-22, 1-23, 1-24, 1-26 Precautions on child restraints ........ .1-24, 1-30, 1-34, 1-41 T op tether strap anchor point locations . .1-28 Child safety rear door lock ........... .3-7 Chimes, audible reminders .......... .2-20 Cleaning exterior and interior .
F .M.V .S.S. certification label .......... .9-11 Fog light switch ................ .2-33 Front air bag system (See supplemental restraint system) ..... .1-52 Front seats .................... .1-2 Fuel Capacities and recommended fuel/lubricants ......
Light Air bag warning light ........ .1-60, 2-18 Brake light (See stop light) ........ .8-28 Bulb check/instrument panel ....... .2-13 Bulb replacement ............. .8-28 Charge warning light ........... .2-15 Fog light switch .............. .2-33 Headlight and turn signal switch .
Power rear windows ............ .2-50 Power steering fluid ............ .8-12 Power steering system .......... .5-31 Power windows .............. .2-48 Rear power windows ........... .2-50 Precautions Maintenance precautions .......... .8-5 On-pavement and off-road driving precautions .
Push starting ................ .6-10 Starting the engine ............ .5-12 Startup screen .................. .4-3 Steering Power steering fluid ............ .8-12 Power steering system .......... .5-31 Tilting steering wheel ........... .3-14 Steering wheel audio control switch .
V ehicle dimensions and weights ........ .9-9 V ehicle dynamic control (VDC) off switch . . .2-36 V ehicle dynamic control (VDC) system .... .5-34 V ehicle electronic system ............ .4-9 V ehicle identification .............. .9-10 V ehicle identification number (VIN) (Chassis number) .
RECOMMENDED FUEL (without Flexible Fuel V ehicle [FFV] option): Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Only vehicles with the E-85 filler door label can operate on E-85.
® 2011 TIT AN OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2011 N I SSAN TIT AN A6 0-D Printing : July 2010 (16) Publication No.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Nissan 2011 Titan è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Nissan 2011 Titan - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Nissan 2011 Titan imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Nissan 2011 Titan ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Nissan 2011 Titan, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Nissan 2011 Titan.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Nissan 2011 Titan. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Nissan 2011 Titan insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
