Manuale d’uso / di manutenzione del prodotto 2010 Sentra del fabbricante Nissan
Vai alla pagina of 360
® 2010 S E NTRA OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2010 N IS SAN SE NTRA B16-D Printing : February 2010 Publication No.
W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure.
This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing.
BLUETOOTH 威 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon. XM Radio 威 requires subscription, sold separately after first 90 days. Not available in Alaska, Hawaii or Guam. For more information, visit www.xmradio.com. © Nissan Mexicana, S.
NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs.
T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Display screen, heater, air co.
.
0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment .................
1. T op tether anchor (P . 1-28) 2. Rear headrest (P . 1-5) 3. Rear seat belts (P . 1-13) 4. Roof-mounted curtain side-impact supplemental air bag (P . 1-43) 5. Front seat-mounted side-impact supplemental air bag (P . 1-43) 6. Front-seat Active Head Restraint (P .
1. Engine hood (P . 3-23) 2. Windshield wiper and washer switch (P . 2-20) 3. Windshield (P . 8-20) 4. Moonroof (if so equipped) (P . 2-37) 5. P ower windows (if so equipped) (P . 2-34) 6. Door locks, keyfob (if so equipped) , NISSAN Intelligent K ey ™ (if so equipped) , keys (P .
1. T runk lid (P .3-23 ) 2. V ehicle loading (P . 9-12) 3. Interior trunk lid release (P . 3-24) 4. Rear window defroster switch (P . 2-21) 5. Child safety locks (P . 3-7) 6. Fuel-filler door (P . 3-25) 7. Fuel-filler cap, fuel recommendation (P . 3-25, P .
1. Rear seat (P . 1-3) 2. Moonroof (if so equipped) (P . 2-37) 3. Interior lights, illuminated entry , moonroof switch (if so equipped) (P . 2-39, P . 2-22, P . 2-37) 4. Sun visors (P . 3-27) 5. Rearview mirror (P . 3-28) 6. Glove box (P . 2-31) 7. Cup holders (P .
1. Headlight/fog light (if so equipped) /turn signal switch (P . 2-22); Manual shift paddles (if so equipped) (P .5-15) 2. Steering wheel switch for audio control and Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-60, 4-62) 3. Driver’s supplemental air bag/Horn (P .
25. Tilt steering (P .3-27) 26. Storage bin (P . 2-28) 27. Hood release lever (P . 3-23) 28 V ehicle Dynamic Control (VDC) off switch (if so equipped) (P .2-16) * Refer to the separate Navigation System Own- er’s Manual (if so equipped) . See the page number indicated in paren- theses for operating details.
MR20DE engine 1. Engine coolant reservoir (P . 8-8) 2. Engine oil filler cap (P . 8-9) 3. Brake fluid reservoir/Clutch fluid reservoir (M/T model) (P . 8-13) 4. Battery (P . 8-15) 5. Air cleaner (P . 8-18) 6. Fuse/fusible link box (P . 8-22) 7. Radiator cap (P .
QR25DE engine 1. Engine coolant reservoir (P . 8-8) 2. Engine oil filler cap (P . 8-9) 3. Brake fluid reservoir/Clutch fluid reservoir (M/T model) (P . 8-13) 4. Battery (P . 8-15) 5. Air cleaner (P . 8-18) 6. Fuse/fusible link box (P . 8-22) 7. Radiator cap (P .
W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light (if so equipped) 2-10 or Brake warning light 2-10 Charge warning light 2-11 Door open warning light 2-11 Electric power steer.
Indicator light Name Page Overdrive off indica- tor light (CVT mod- els) 2-15 Security indicator light 2-15 Side light and head- light indicator light (green) 2-16 Slip indicator light (if so equipped.
MEMO 0-12 Illustrated table of contents.
1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front manual seat adjustment ....................1 - 2 Rear folding seat system (if so equipped) .........1 - 3 Head restraints ....
WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries.
Forward and backward Pull the center of the bar up and hold it while you slide the seat forward or backward to the desired position. Release the bar to lock the seat in position. Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward.
Interior trunk access (if so equipped) The trunk can be accessed from the rear seat for loading and unloading, as shown. 1. Stow outboard seat belts with clip before folding rear seatbacks. When folding the passenger’s side rear seat- back, first disconnect and stow the center seat belt.
Folding the rear cushions and seatbacks (if so equipped) 1. Lift up on the front edge of the seat cushion and fold it toward the front of the vehicle. 2. Fold down the rear headrest. Pull the head- rest forward and rotate until it clicks into the locked position 䊊 1 .
3. T o return the headrest to the normal position, push down 䊊 1 and release then rotate up until in position 䊊 2 . 4. Fold down seatbacks. See “Interior trunk access” earlier in this section. WARNING ● Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position.
Center armrest (if so equipped) Pull the armrest down until it is horizontal. HEAD RESTRAINTS WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions.
Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the head restraint so the center is level with the center of the seat occupant’s ears.
T o lower, push and hold the lock knob and push the head restraint down. Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat.
Front-seat Active Head Restraints The Active Head Restraint moves forward utiliz- ing the force that the seatback receives from the occupant in a rear-end collision.
Components 1. Adjustable headrest 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the headrest so the center is level with the center of the seat occupant’s ears.
T o lower, push and hold the lock knob and push the headrest down. Removal Use the following procedure to remove the ad- justable headrests. 1. Pull the headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the headrest from the seat.
PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced.
WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit.
WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST .
PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest.
䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat.
WARNING When fastening the seat belts, be certain that the seatbacks are completely se- cured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle.
Center of the rear seat (except SE-R model) The rear seat center seat belt has a connector tongue 䊊 1 and a seat belt tongue 䊊 2 . Both the connector tongue and the seat belt tongue must be securely latched for proper seat belt opera- tion. WARNING ● Always fasten the connector tongue and the seat belt in the order shown.
Stowing the rear center seat belt When folding down the rear seat, the center seat belt can be retracted into a stowed position as follows: 䊊 1 Hold the connector tongue so that the seat belt does not retract suddenly when the tongue is released from the connector buckle.
Attaching the rear center seat belt Always be sure the center seat belt connector tongue and connector buckle are attached. Dis- connect only when folding down the rear seat. T o connect the buckle: 䊊 1 Pull out the connector buckle from the fabric sleeve.
WARNING ● After adjustment, release the adjust- ment button and try to move the shoul- der belt anchor up and down to make sure it is securely fixed in position.
Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations.
LARGER CHILDREN Children who are too large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 cm) tall and weighs between 40 lbs (18 kg) and 80 lbs (36 kg) .
WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly.
This vehicle is equipped with a universal child restraint anchor system, referred to as the LA T CH (Lower Anchors and T ethers for CHildren) sys- tem. Some child restraints include rigid or webbing-mounted attachments that can be con- nected to these anchors.
LA T CH lower anchor WARNING Failure to follow the warnings and instruc- tions for proper use and installation of child restraints could result in serious in- jury or death of a child or other passen- gers in a sudden stop or collision: – Attach LA TCH system compatible child restraints only at the locations shown in the illustration.
The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments or seat belts. See “T op tether anchor” for installation instructions. When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint.
REAR-FACING CHILD RESTRAINT INSTALLATION USING LA T CH Refer to all W arnings and Cautions in the “Child safety” and “Child restraints” sections before in- stalling a child restraint. Follow these steps to install a rear-facing child restraint using the LA T CH system: 1.
3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments.
REAR-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING ● The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured.
2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manufacturer’s in- structions for belt routing. 3. Pull the shoulder belt until the belt is fully extended.
5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 6. After attaching the child restraint, test it be- fore you place the child in it.
2. Secure the child restraint anchor attach- ments to the LA T CH lower anchors. Check to make sure the LA T CH attachment is prop- erly attached to the lower anchors. If the child restraint is equipped with a top tether strap, route the top tether strap and secure the tether strap to the tether anchor point.
6. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the LA T CH attachment path. The child re- straint should not move more than 1 inch (25 mm) , from side to side.
2. P osition the child restraint on the seat. Al- ways follow the child restraint manufactur- er’s instructions. The back of the child restraint should be secured against the vehicle seatback. If necessary , adjust or remove the head re- straint or headrest to obtain the correct child restraint fit.
5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 6. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt.
9. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 2 through 8. 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position.
INSTALLING TOP TETHER STRAP First, secure the child restraint with the LA T CH lower anchors (rear outboard seat positions only) or the seat belt, as applicable. 1. Flip up the anchor cover 䊊 1 from the anchor point which is located directly behind the child seat.
Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213.
Booster seat installation CAUTION Do not use the lap/shoulder belt in the Automatic Locking Retractor mode when using a booster seat with the seat belts. Refer to all W arnings and Cautions in the “Child safety” , “Child restraints” and “Booster seats” sections before installing a child restraint.
If the seating position does not have an adjustable head restraint or headrest and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. P osition the lap portion of the seat belt low and snug on the child’s hips.
PRECAUTIONS ON SUPPLEMENTAL RESTRAINT SYSTEM This Supplemental Restraint System (SRS) sec- tion contains important information concerning the following systems: ● Driver and passenger supplemental f.
WARNING ● The front air bags ordinarily will not inflate in the event of a side impact, rear impact, rollover, or lower severity fron- tal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.
WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations.
ARS1042 ARS1043 ARS1044 1-46 Safety—Seats, seat belts and supplemental restraint system.
WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained.
WARNING ● The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat with both feet on the floor.
SSS0159 SSS0162 Safety—Seats, seat belts and supplemental restraint system 1-49.
1. Roof-mounted curtain side-impact supplemental air bags 2. Front seat-mounted side-impact supplemental air bag modules 3. Supplemental front-impact air bag modules 4. Crash zone sensor 5. Air Bag Control Unit (ACU) 6. Occupant classification sensor (pressure sensor) 7.
flate if the forces in another type of collision are similar to those of a higher severity frontal impact. They may not inflate in certain frontal collisions. V ehicle damage (or lack of it) is not always an indication of proper front air bag system opera- tion.
Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection.
tions is on the seat, its weight and the child’s weight can be detected and cause the air bag to turn OFF . Occupant classification sensor opera- tion can vary depending on the front passenger seat belt sensors.
until you have confirmed with your dealer that your air bag is working properly , reposition the occupant or child restraint in a rear seat. The air bag system and passenger air bag status light will take a few seconds to register a change in the passenger seat status.
● Work on and around the front air bag system should be done by a NISSAN dealer. Installation of electrical equip- ment should also be done by a NISSAN dealer.
practical from the door finishers and side roof rails. The side air bags and curtain air bags inflate quickly in order to help protect the front and rear outboard occupants.
Seat belts with pretensioners (front seats) WARNING ● The pretensioners cannot be reused af- ter activation. They must be replaced together with the retractor and buckle as a unit.
1. SRS Front Air Bag W arning Labels SUPPLEMENTAL AIR BAG WARNING LABELS W arning labels about the supplemental front- impact air bag system are placed in the vehicle as shown in the illustration.
Repair and replacement procedure The front air bags, side air bags, curtain air bags and pretensioners are designed to inflate on a one-time-only basis. As a reminder, unless it is damaged, the supplemental air bag warning light remains illuminated after inflation has occurred.
2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer .....................2 - 4 T rip computer (if so equipped) ...................2 - 4 T achometer .
Windows ........................................ 2-34 P ower windows (if so equipped) ................ 2-34 Manual windows (if so equipped) ................ 2-37 Moonroof (if so equipped) ......................... 2-37 Electric moonroof ..............
1. Headlight/fog light (if so equipped) /turn signal switch (P . 2-22); Manual shift paddles (if so equipped) (P .5-15) 2. Steering wheel switch for audio control and Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-60, 4-62) 3. Driver’s supplemental air bag/Horn (P .
25. Tilt steering (P .3-27) 26. Storage bin (P . 2-28) 27. Hood release lever (P . 3-23) 28 V ehicle Dynamic Control (VDC) off switch (if so equipped) (P .2-16) * Refer to the separate Navigation System Own- er’s Manual (if so equipped) . See the page number indicated in paren- theses for operating details.
SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates the vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer records the total distance the ve- hicle has been driven.
Distance to empty (dte—mile or km) The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly be- ing calculated, based on the amount of fuel in the fuel tank and the actual fuel consumption.
g (gravity) -FORCE GAUGE (if so equipped) This gauge shows the straight-line acceleration and deceleration g-forces while you are driving. NO TE: The g-force gauge does not indicate cor- nering g-forces. FUEL GAUGE NO TE: The ignition switch must be placed in the ON position for the gauge to give a reading.
ENGINE COOLANT TEMPERATURE GAUGE NO TE: The ignition switch must be placed in the ON position for the gauge to give a reading. The gauge indicates the engine coolant tempera- ture. The engine coolant temperature is within the normal range when the reading is within the zone 䊊 A shown in the illustration.
CAUTION ● This gauge is not designed to indicate low engine oil level. Use the dipstick to check the oil level. (See “Engine oil” in the “Maintenance and do-it-yourself” section.) ● If the gauge needle does not move with the proper amount of engine oil, have the vehicle checked by a NISSAN dealer.
or Anti-lock Braking System (ABS) warning light (if so equipped) NISSAN Intelligent Key™ warning light (if so equipped) Malfunction Indicator Light (MIL) or Brake warning light P position selecting .
CHECKING BULBS With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: or , , , , , If equipped,.
ABS is not functioning properly . Have the brake system checked, and if necessary , repaired by a NISSAN dealer promptly . Avoid high-speed driv- ing and abrupt braking.
Low fuel warning light This light comes on when the fuel level in the fuel tank is getting low . Refuel as soon as it is conve- nient, preferably before the fuel gauge reaches E (Empty) . There will be a small reserve of fuel in the tank when the fuel gauge reaches E (Empty) , showing no more fuel bars.
● When a spare tire is mounted or a wheel is replaced the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting.
Refer to “Seat belts” in the “Safety—Seats, seat belts and supplemental restraint system” section for precautions on seat belt usage. Supplemental air bag warning light When the ignition switch is placed in the ON or ST ART position, the supplemental air bag warn- ing light illuminates for about 7 seconds and then turns off.
The high beam indicator light also comes on when the passing signal is activated. Malfunction Indicator Light (MIL) If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction.
For vehicles with Intelligent K ey: This light blinks when the ignition switch is placed in the L OCK position with the key removed from the ignition switch. The blinking security indicator light indicates that the security systems equipped on the vehicle are operational.
Light reminder chime With the ignition switch placed in the OFF posi- tion, a chime sounds when the driver’s door is opened if the headlights or parking lights are on.
The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Al- ways secure your vehicle even if parking for a brief period. Never leave your keys in the ignition, and always lock the vehicle when unattended.
● The alarm automatically turns off after ap- proximately 50 seconds. However, the alarm reactivates if the vehicle is tampered with again. The alarm can be shut off by unlocking the driver’s door with the key , a request switch or by pressing the button on the keyfob or Intelligent K ey.
Security indicator light For vehicles without Intelligent K ey: This light blinks whenever the ignition switch is placed in the L OCK, OFF or ACC position. For vehicles with Intelligent K ey: This light blinks when the ignition switch is placed in the L OCK position with the key removed from the ignition switch.
Push the lever up 䊊 4 to have one sweep opera- tion (MIST) of the wiper. Pull the lever toward you 䊊 5 to operate the washer. The wiper will also operate several times. WARNING In freezing temperatures the washer solu- tion may freeze on the windshield and obscure your vision which may lead to an accident.
HEADLIGHT CONTROL SWITCH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on.
CAUTION Even though the battery saver feature au- tomatically turns off the headlights after a period of time, you should turn the head- light switch to the OFF position when the engine is not running to avoid discharging the vehicle battery.
T URN SIGNAL SWITCH T urn signal 䊊 1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signals cancel automatically . Lane change signal 䊊 2 T o signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the lever does not latch.
The flashers will operate with the ignition switch placed in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving. T o sound the horn, push the top portion of the steering wheel’s center pad. WARNING Do not disassemble the horn.
The front seats are warmed by built-in heaters. 1. Start the engine. 2. Push the low or high position of the switch, as desired, depending on the temperature. The indicator light in the switch will illumi- nate. The heater is controlled by a thermostat, automatically turning the heater on and off.
CAUTION ● The outlet and plug may be hot during or immediately after use. ● The power outlets are not designed for use with a cigarette lighter. ● Do not use with accessories that ex - ceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory.
STORAGE BIN Pull the lid down to open the storage bin. Some models are equipped with a soft lining in the storage bin for storing sunglasses. WARNING Keep the storage bin closed while driving to prevent an accident. STORAGE TRAYS WARNING Do not place sharp objects in the trays to help prevent injury in an accident or sud- den stop.
● The inside of the storage tray can get hot. Do not place objects inside which can melt or be easily deformed. WARNING Keep the tray lid closed while driving to help prevent contents from becoming pro- jectiles causing injury in an accident or during a sudden stop.
CUP HOLDERS Adjust the cup holder size by turning the adjust- ment knob and sliding the cup holder divider to the desired position. CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger.
GLOVE BOX Open the glove box by pulling the handle. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. CONSOLE BOX T o open the console box, press in on the lever 䊊 1 and raise the lid 䊊 2 . T o close, push the lid down until the lock latches.
Once the rear seats have been lowered, the trunk divider can be opened by pressing down on the securing latch and pushing the divider toward the rear of the vehicle.
The cargo net helps keep packages in the cargo area from moving around while the vehicle is in motion. T o install the cargo net, attach the net to the retainers.
P OWER WINDOWS (if so equipped) WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ● Do not leave children unattended inside the vehicle.
Front passenger’s power window switch The passenger’s window switch operates only the corresponding passenger’s window . T o open the window , push the switch to the first detent and continue to hold it down until the desired window position is reached 䊊 1 .
Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs.
MANUAL WINDOWS (if so equipped) The side windows can be opened or closed by turning the hand crank on each door. ELECTRIC MOONROOF This moonroof only operates with the ignition switch placed in the ON position. NO TE: If the battery is discharged or is discon- nected, the moonroof may not operate cor- rectly, and must be reset.
WARNING ● In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints. ● Do not allow anyone to stand up or extend any portion of their body out of the moonroof opening while the vehicle is in motion or while the moonroof is closing.
WARNING There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc .
● The driver’s door is opened and then closed while the ignition switch is placed in the OFF position. ● The ignition switch is placed in the OFF position while all doors are closed. The interior light will turn off while the 30 second timer is activated when: ● The driver’s door is locked by the keyfob, a key or the lock -unlock switch.
The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off. For bulb replacement procedures, refer to “Exte- rior and interior lights” in the “Maintenance and do-it-yourself” section of this manual.
MEMO 2-42 Instruments and controls.
3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN V ehicle Immobilizer System keys .........3 - 2 NISSAN Intelligent K ey™ (if so equipped) .........3 - 3 Doors ...................................
1. T wo master keys (black) with transpon- der chip and chrome NISSAN brand symbol on one side 2. T ransponder chip 3. K ey number plate A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle.
1. T wo Intelligent K eys 2. Mechanical keys (inside Intelligent K eys) 3. K ey number plate NISSAN INTELLIGENT K EY™ (if so equipped) Y our vehicle can only be driven with the Intelligent K eys which are registered to your vehicle’s Intel- ligent K ey components and NISSAN Vehicle Im- mobilizer System components.
Mechanical key The Intelligent K ey contains the mechanical key, which can be used in case of a discharged bat- tery . T o remove the mechanical key, release the lock knob on the back of the Intelligent K ey. T o install the mechanical key, firmly insert it into the Intelligent K ey until the lock knob returns to the lock position.
LOCKING WITH KEY Manual (if so equipped) T o lock a door, turn the key toward the front of the vehicle 䊊 1 . T o unlock, turn the key toward the rear 䊊 2 . P ower (if so equipped) The power door lock system allows you to lock or unlock all doors at the same time.
LOCKING WITH POWER DOOR LOCK SWITCH T o lock all the doors without a key, push the door lock switch (driver’s or front passenger’s side) to the lock position 䊊 1 . When locking the door this way , be certain not to leave the key inside the vehicle.
CHILD SAFETY REAR DOOR LOCK Child safety locks help prevent the rear doors from being opened accidentally , especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors. When the lever is in the unlock position 䊊 1 , the door can be opened from the outside or the inside.
● Do not place the keyfob for an extended period in an area where temperatures exceed 140°F (60°C) . ● Do not attach the keyfob with a key holder that contains a magnet. ● Do not place the keyfob near equip- ment that produces a magnetic field, such as a TV , audio equipment and per- sonal computers.
Unlocking doors Press the button on the keyfob once. ● Only the driver’s door unlocks. ● The hazard warning lights flash once if all doors are completely closed with the ignition switch in any position except the ON posi- tion.
Using the panic alarm (if so equipped) If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pressing and holding the button on the keyfob for longer than 0.5 seconds. The panic alarm and headlights will stay on for 25 seconds.
The hazard warning lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated. Deactivating the horn beep feature does not si- lence the horn if the alarm is triggered. WARNING ● Radio waves could adversely affect electric medical equipment.
● When the vehicle is parked near a parking meter. In such cases, correct the operating conditions before using the Intelligent K ey function or use the mechanical key . Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years.
OPERATING RANGE The Intelligent K ey functions can only be used when the Intelligent K ey is within the specified operating range from the request switch 䊊 1 .
● T o prevent the Intelligent Key from being left inside the vehicle, make sure you carry the Intelligent K ey with you and then lock the doors. ● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open.
NO TE: ● Doors lock with the door handle request switch while a mechanical key is in the igni- tion switch or the ignition switch is pushed in. ● Doors lock with the door handle request switch while the ignition switch is not in the L OCK position.
Unlocking doors 1. Carry the Intelligent K ey. 2. Push the door handle request switch 䊊 1 . 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door handle request switch 䊊 1 again within 60 seconds to unlock all doors.
Opening the trunk lid 1. Push the trunk opener request switch 䊊 A for more than 1 second while carrying the Intel- ligent K ey with you. 2. The trunk will unlatch.
CAUTION After locking the doors using the Intelli- gent Key, be sure that the doors have been securely locked by operating the door handles. Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 60 sec- onds to unlock all doors.
Releasing the trunk lid Press the button for longer than 0.5 sec- onds to open the trunk lid. The trunk release button will not operate when the ignition switch is placed in the ON position.
Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the Intelligent K ey. T o deactivate: Press and hold the and buttons for at least 2 seconds. The hazard warning lights will flash 3 times to confirm that the horn beep feature has been deactivated.
CAUTION When the buzzer sounds and the warning light illuminates, be sure to check both the vehicle and the Intelligent Key. W ARNING SIGNALS T o help prevent the vehicle from moving unex- pectedly by.
T ROUBLESHOOTING GUIDE Symptom Possible Cause Remedy When pushing the door handle request switch The front door beep sounds for approxi- mately 2 seconds. The doors cannot be locked. T ake out the Intelligent Key from the vehicle and push the door handle request switch.
1. Pull the hood lock release handle 䊊 1 located below the instrument panel until the hood springs up slightly . 2. Locate the lever 䊊 2 in between the hood and grille and push the lever sideways with your fingertips. 3. Raise the hood 䊊 3 . 4. Remove the support rod 䊊 4 and insert it into the slot on the underside of the hood 䊊 5 .
T RUNK LID RELEASE The trunk lid release is located on the floor to the left of the driver’s seat. T o open the trunk lid, pull the trunk lid release. T o close the trunk lid, lower and push the trunk lid down securely . Y ou can also open the trunk lid with the keyfob (if so equipped) or Intelligent K ey (if so equipped) .
T o open the trunk from the inside, pull the illumi- nated release handle until the lock releases and push up on the trunk lid. The release handle is made of a material that glows in the dark after a brief exposure to ambient light. The handle is located inside the trunk compart- ment on the interior of the trunk lid.
WARNING ● Gasoline is extremely flammable and highly explosive under certain condi- tions. Y ou could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling.
TILT OPERATION Push the lock lever 䊊 1 down and adjust the steering wheel up or down 䊊 2 to the desired position. Pull the lock lever up to lock the steering wheel in place. WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident.
REARVIEW MIRROR The night position 䊊 1 reduces glare from the headlights of vehicles behind you at night. Use the day position 䊊 2 when driving in daylight hours. WARNING Use the night position only when neces- sary, because it reduces rear view clarity.
Electric control type (if so equipped) The outside mirror remote control only operates when the ignition switch is in the ACC or ON position. Rotate the control lever to select the right or left mirror. Adjust the mirror to the desired position by moving the control lever.
4 Display screen, heater, air conditioner, audio and phone systems Control panel buttons — color screen with Navigation System (if so equipped) ..................4 - 2 How to use the touch screen ....................4 - 3 How to use the back button .
CD care and cleaning .......................... 4-59 Steering wheel switch for audio control (if so equipped) ............................... 4-60 Antenna ...................................... 4-61 Car phone or CB radio ............................ 4-62 Bluetooth 姞 Hands-Free Phone System (if so equipped) .
WARNING ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● In case you notice any foreign object in the system hardware, spill liquid on it, or notice smoke or smell coming from it, stop using the system immediately and contact your nearest NISSAN dealer.
9. P ower button/Volume control knob *For Navigation system control buttons, refer to the separate Navigation System Owner’s Manual. When you use this system, make sure the engine is running. If you use the system with the engine not running (ignition ON or ACC) for a long time, it will discharge the battery, and the engine will not start.
Adjusting the item: For screens where an item can be adjusted incre- mentally , such as when adjusting the bass and treble for the audio system, touch the “+” key 䊊 1 or the “ ⫺ ” key 䊊 2 to adjust the settings of an item.
● OK: Completes the character input. T ouch screen maintenance If you clean the display screen, use a dry , soft cloth. If additional cleaning is necessary , use a small amount of neutral detergent with a soft cloth. Never spray the screen with water or de- tergent.
System setup Select the “System” key to select and/or adjust various functions of the system. A screen with additional options will appear. Display: Select the “Display” key to adjust the appearance of the display .
Clock: Select the “Clock” key to adjust the time and the appearance of the clock on the display . The fol- lowing settings can be adjusted: Time Format The clock can be set to 12 hours or 24 hours. Use GPS Clock When this setting is activated, the clock is set and continually updated via the GPS used by the Navigation System.
Beep tones: Select the “Beep T ones” key to toggle the beep tones feature on or off. When activated, a beep sound will be heard when a pop-up message appears on the screen or a button on the unit (such as the button) is pressed and held for two seconds.
HOW TO READ THE DISPLAYED LINES Lines which indicate the vehicle clearance and distances to objects with reference to the bumper line 䊊 A are displayed on the monitor. They are indicated as reference distances to objects. The lines and colors in the display indi- cate distances from the back bumper line 䊊 A in the illustration.
Backing up on a steep uphill When backing up the vehicle up a hill, the dis- tance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.
the hill is the place 䊊 B . Note that any object on the hill is viewed in the monitor closer than it appears. Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display . However, the position 䊊 C is actually at the same distance as the position 䊊 A .
ADJUSTING THE SCREEN (models without Navigation System) T o adjust the quality of the screen, press the setting control knob on the audio system. ● T o adjust the Brightness or Contrast, press the setting control knob repeatedly until the setting you wish to adjust is displayed.
OPERATING TIPS ● When the shift selector is shifted to R (Re- verse) , the monitor screen automatically changes to the RearView Monitor mode. However, the radio can be heard. ● It may take some time until the RearView Monitor is displayed after the shift selector has been shifted to R (Reverse) .
Adjust air flow direction for the driver’s and pas- senger’s side 䊊 1 , and center 䊊 2 ventilators by moving the ventilator slide and/or ventilator as- semblies. Open or close the ventilators 䊊 1 by using the dial. Move the dial toward the to open the ven- tilators or toward the to close them.
1. Fan control dial 2. Air recirculation button 3. T emperature control dial 4. Air flow control dial 5. Rear window defroster T ype A WHA0470 Display screen, heater, air conditioner, audio and phone .
1. Fan control dial 2. Air recirculation button 3. T emperature control dial 4. Air conditioner button 5. Air flow control dial 6. Rear window defroster CONTROLS Fan control dial The fan control dial turns the fan on and off, and controls fan speed. Air flow control dial The air flow control dial allows you to select the air flow outlets.
On position (Indicator light on) : Interior air is recirculated inside the vehicle. Press the button to the on position when: ● driving on a dusty road. ● to prevent traffic fumes from entering pas- senger compartment. ● for maximum cooling when using the air con- ditioner.
● T o quickly remove ice or fog from the win- dows, turn the fan control dial to HI and the temperature control lever to the full HO T position. ● When the or position is se- lected, the air conditioner automatically turns on (however, the indicator light will not illuminate) .
● For quick cooling when the outside tem- perature is high, push the button to the on position (indicator light on) . Be sure to return the button to the off position for normal cooling. MAX A/C may be used for quick cooling. Dehumidified heating This mode is used to heat and dehumidify the air.
WHA1116 WHA1117 4-20 Display screen, heater, air conditioner, audio and phone systems.
WHA1118 WHA1119 Display screen, heater, air conditioner, audio and phone systems 4-21.
The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone layer. Special charging equipment and lubricant is re- quired when servicing your NISSAN air condi- tioner.
RADIO Place the ignition switch in the ACC or ON position and press the POWER/VOLUME con- trol knob to turn the radio on. If you listen to the radio with the engine not running, the ignition switch should be placed in the ACC position.
SATELLITE RADIO RECEPTION (if so equipped) When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly .
● Do not expose the CD to direct sun- light. ● CDs that are in poor condition or are dirty, scratched or covered with finger- prints may not work properly.
● Sampling frequency — Sampling frequency is the rate at which the samples of a signal are converted from analog to digital (A/D conversion) per second.
Specification chart : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported.
T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player.
Universal Serial Bus (USB) memory (if so equipped) This system supports various USB memory sticks, USB hard drives and iP od 姞 players. There are some USB devices which may not be sup- ported with this system. ● Make sure that the USB device is connected correctly into the USB connector.
● If the iP od 姞 automatically selects large video podcast files while in the shuffle mode, the vehicle center display may momentarily black out, but it will soon recover. ● Improperly plugging in the iP od 姞 may cause a checkmark to be displayed on and off (flickering) .
1. FM-AM button 2. CD eject button 3. SEEK button 4. CD button 5. CD insert slot 6. AUX button 7. TUNE button 8. MENU button 9. RPT button 10. AUX IN jack 11.
Press the SEEK or or TUNE or button to adjust the Bass, T reble, Fade and Balance to the desired level. Fade adjusts the sound level between the front and rear speak - ers and Balance adjusts the sound between the right and left speakers.
If the battery cable is disconnected or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Compact disc (CD) player operation Place the ignition switch in the ACC or ON position and carefully insert the compact disc into the slot with the label side up.
1. MUTE button 2. DISP/TEXT button 3. FM-AM button 4. CD button 5. CD insert slot 6. iP od button 7. AUX button 8. CL OCK button 9. CD eject button 10. TUNE/FF-REW/FOLDER button 11. SCAN/RPT button 12. AUDIO button 13. AUX IN jack 14. Station select (1 - 6) buttons 15.
MUTE button: Press the button to mute the audio sound. Press the button again to resume playing the audio at its previous volume. AUDIO button (Bass, T reble, Fade, Bal- ance, SSV , Beep) : Press the .
TUNE button (T uning) : Press the TUNE/FF-REW/FOLDER button or for manual tuning. SEEK tuning: Press the SEEK/TRACK button or to tune from low to high or high to low frequen- cies and to stop at the next broadcasting station. SCAN tuning: Press the SCAN/RPT button to stop at each broadcasting station for 5 seconds.
CD with MP3 or WMA: When the TUNE/FF-REW/FOLDER button (fast forward) or (reverse) is pressed for less than 1.5 seconds while the compact disc is playing, the folders in the CD will change. When the TUNE/FF-REW/FOLDER button (fast forward) or (reverse) is pressed for more than 1.
1. SCAN button 2. Station select (1 - 6) buttons 3. CD insert slot 4. iP od MENU button 5. CD eject button 6. TUNE/FOLDER knob/Setting control button 7. SEEK/TRACK buttons 8. AUX IN jack 9. AUX button* 10. CD button 11. FM-AM button 12. RPT button 13.
T o turn the system off, press the VOL/ON·OFF control knob. T urn the VOL/ON·OFF control knob to adjust the volume. This vehicle may be equipped with Speed Sen- sitive V olume (SSV) for audio. When this feature is active, the audio volume changes as the driving speed changes.
Display settings: T o adjust the brightness or contrast of the display screen, press the ENTER button until the chosen setting is displayed. Use the TUNE/SCROLL knob to adjust the display to the desired level. On-screen Clock: The clock is shown in the upper right corner of the screen.
iPod 姞 MENU button This button can only be used for iP od 姞 opera- tions. See “iP od 姞 Player Operation without Navi- gation System (T ype B)” in this section for details about the function of this button.
If the battery cable is disconnected or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Compact disc (CD) player operation Place the ignition switch in the ACC or ON position and carefully insert the compact disc into the slot with the label side up.
TUNE/SCROLL knob (MP3/WMA CD only) : If an MP3/WMA CD with multiple folders is play- ing, turn the TUNE/SCROLL knob to change folders. T urn the knob to the left to skip back a folder.
1. XM button 2. CD insert slot 3. Display screen 4. CD eject button 5. SETUP button 6. BACK button 7. TUNE/SCROLL knob, AUDIO button 8. Station select (1 - 6) buttons 9. AUX button 10. VOL/ON-OFF control knob 11. SEEK/CA TEGORY button 12. CD button 13.
T urn the VOL/ON·OFF control knob to adjust the volume. This vehicle may be equipped with Speed V ol- ume for audio. When this feature is active, the audio volume changes as the driving speed changes. Audio settings: Press the SETUP button to display the audio settings on the screen.
FM/AM/SA T radio operation FM·AM button: Press the FM·AM button to change the band as follows: AM → FM1 → FM2 → AM If another audio source is playing when the FM·AM button is pressed, the audio source play- ing will automatically be turned off and the last radio station played will begin playing.
T uning with the touchscreen: When in AM or FM mode, the radio can be tuned using the touchscreen. T o bring up the visual tuner, touch the “T une” key on the lower right corner of the screen. A screen appears with a bar running from low frequencies on the left to high frequencies on the right.
CD/MP3 display mode While listening to a CD or an MP3/WMA CD, certain text may be displayed (when a CD en- coded with text is being used) . Depending on how the CD or MP3/WMA CD is encoded, the text is displayed listing the artist, album and song title.
Browse: T ouch the “Browse” key to display the titles on the CD in list format. T ouch the title of a song in the list to begin playing that song. If an MP3 CD is playing, touching the “Browse” key will also list the folders on the disc. Follow the procedure for selecting a song with the touchscreen to choose a folder.
For more information about the USB input jack, see “USB interface” in this section. EJECT button: When the button is pressed with a com- pact disc loaded, the compact disc will eject and the last source will be played. When the button is pressed twice with a compact disc loaded, the compact disc will be ejected further for easier CD removal.
Play information Information about the audio files being played can be displayed on the display screen of the vehicle’s audio system. Depending on how the audio files are encoded, information such as Folder, Song and Artist will be displayed. The track number and number of total tracks in the folder are displayed on the screen as well.
The current play pattern of the USB device is displayed on the screen unless no pattern is applied. TUNE/SCROLL knob: If there are multiple folders with audio files on the USB device, turn the TUNE/SCROLL knob to change folders. T urn the knob to the left to skip back a folder.
Play information Information about the audio files being played is shown on the display screen of the vehicle’s audio system. T ouch “Browse” to display the list of folders and files on the USB device. T ouch the name of a song on the screen to begin playing that song.
iP od 姞 * PLAYER OPERATION WITHOUT NAVIGATION SYSTEM (T ype A) (if so equipped) Connecting iP od 姞 The iP od 姞 outlet connector is located on the center console. Y our vehicle is equipped with the specialized cable for connecting the iP od 姞 to your vehicle audio unit.
ENTER and BACK buttons: Press the ENTER button while the top menu is displayed to show program details on the audio display . Use the SEEK buttons or to scroll through the choices and press the ENTER button to make a selection. Press the BACK button to return to the previous display .
the battery of your iP od 姞 (if compatible) is charged during the connection to the vehicle. While connected to the vehicle, the iP od 姞 can only be operated by the vehicle audio controls. T o disconnect the iPod 姞 from the vehicle, remove the USB end of the cable from the USB jack on the vehicle, then remove the cable from the iP od 姞 .
RDM button: Press the RDM button while a track is playing to change the play pattern as follows: TRK SHUFFLE → ALBUM SHUFFLE → SHUFFLE OFF TRK SHUFFLE: the tracks in the current list will be played randomly . ALBUM SHUFFLE: the albums in the current list will be played randomly .
Audio main operation AUX button: Place the ignition switch in the ACC or ON position and press the AUX button repeatedly until the iP od 姞 mode is displayed on the screen. If another audio source is playing and the iP od 姞 is connected, press the AUX button repeatedly to switch to the iP od 姞 mode.
Random: T ouch the “Random” key to apply a random play pattern to the iP od 姞 . When the random mode is active, the icon is displayed to the left of the song title or album name to denote which random pattern is applied. T o cancel Random mode, touch the “Random” key until no icon is displayed.
1. T uning switch 2. MODE select switch 3. POWER on/off switch 4. V olume control switch 1. T uning switch 2. Phone operation switch 3. POWER on and MODE select switch 4. V olume control switch STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the steering wheel.
MODE select switch (models with Navigation System) Push the MODE select switch to change the mode in the following sequence: AM/FM* → XM** → CD*** → USB/AUX*** → AM/FM* * When using the MODE switch, the audio mode switches to the preset bank (AM, FM1 or FM2) that was last active.
When installing a CB, ham radio or car phone in your NISSAN, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular telephone should not be used while driving so full attention may be given to vehicle operation.
Y our NISSAN is equipped with the Bluetooth 姞 Hands-Free Phone System. If you have a com- patible Bluetooth 姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module.
– Y our cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice dur- ing a call.
Operating tips T o get the best performance out of the NISSAN V oice Recognition system, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.
– NO T “One eight hundred six six two sixty two hundred,” and – NO T “One eight oh oh six six two sixty two hundred” ● Numbers can be spoken in small groups.
Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” in this section for more information. PHONE/END While the voice recognition system is active, press and hold the button for 5 seconds to quit the voice recognition system at any time.
3. Say: “ Add phone” 䊊 B . The system acknowl- edges the command and asks you to initiate connecting from the phone handset 䊊 C . The connecting procedure of the cellular phone varies according to each cellular phone model. See the cellular phone Own- er’s Manual for details.
LIST OF VOICE COMMANDS Main Menu “Call” “Phonebook” “Recent Calls” “Connect Phone” When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the com- mands in each sub-menu.
If a call back number does not exist, the system announces, “There is no number to call back” and ends the VR session. During a call During a call there are several command options available. Press the button on the steering wheel to mute the receiving voice and enter com- mands.
“T ransfer entry” 䊊 A Use the T ransfer Entry command to store a new name in the system. When prompted by the system, say the name you would like to give the new entry . For example, say: “Mary .” If the name is too long or too short, the system tells you, then prompts you for a name again.
NO TE: Each phone has its own separate phone- book. Y ou cannot access Phone A’s phone- book if you are currently connected with Phone B . “List names” 䊊 A Use the List Names command to hear all the names and locations in the phone book. The system recites the phone book entries but does not include the actual phone numbers.
Use the Recent Calls command to access out- going, incoming or missed calls. “Outgoing” 䊊 A Use the Outgoing command to list the outgoing calls made from the vehicle. “Incoming” 䊊 B Use the Incoming command to list the incoming calls made to the vehicle.
5. Press the button. For information on selecting a different lan- guage, see “Choosing a language” in this section. 6. V oice memory A or memory B is selected automatically . If both memory locations are already in use, the system will prompt you to overwrite one.
MANUAL CONTROL While using the voice recognition system, it is possible to select menu options by using the steering wheel controls instead of speaking voice commands. The manual control mode does not allow dialing a phone number by digits. The user may select an entry from the Phonebook or Re- cent Calls lists.
T ROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 Tire Pressure Monitoring System (TPMS) (if so equipped) ...
WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle.
CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in the ignition, fuel injection, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat.
● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h) . Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) . ● The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted for all 4 tires.
Some examples are: – Facilities or electric devices using similar radio frequencies are near the vehicle. – If a transmitter set to similar frequencies is being used in or near the vehicle. – If a computer (or similar equipment) or a DC/AC converter is being used in or near the vehicle.
● If you decide that it is not safe to return the vehicle to the road surface based on vehicle, road or traffic conditions, gradually slow the vehicle to a stop in a safe place off the road. RAPID AIR PRESSURE LOSS Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole.
WARNING ● Never remove or turn the key to the LOCK position while driving. The steer- ing wheel will lock (for models with a steering lock mechanism) . This may cause the driver to lose control of the vehicle and could result in serious ve- hicle damage or personal injury.
Operating range The Intelligent K ey functions can only be used when the Intelligent K ey is within the specified operating range. When the Intelligent K ey battery is almost dis- charged or strong radio waves are present near the operating location, the Intelligent K ey sys- tem’s operating range becomes narrower and may not function properly .
● When removing the key from the ignition switch, make sure the shift selector is in the P (Park) position. When the ignition switch cannot be turned to the L OCK position: 1. Shift the shift selector to the P (Park) posi- tion. 2. T urn the ignition switch slightly in the ON direction.
In order for the steering wheel to be locked, it must be turned about 1/8 of a turn clockwise from the straight up position. T o lock the steering wheel (for models with steering lock mechanism) , place the igni- tion switch in the LOCK position. Remove the key.
● Make sure the area around the vehicle is clear. ● Check fluid levels such as engine oil, cool- ant, brake and clutch fluid, and windshield- washer fluid as frequently as possible, or at least whenever you refuel. ● Check that all windows and lights are clean.
3. Crank the engine with your foot off the accelerator pedal by turning the ignition switch to ST ART . Release the switch when the engine starts. If the engine starts, but fails to run, repeat the above procedure.
The CVT in your vehicle is electronically con- trolled to produce maximum power and smooth operation. The recommended operating procedures for this transmission are shown on the following pages. Follow these procedures for maximum vehicle performance and driving enjoyment.
WARNING Apply the parking brake if the shift selec- tor is in any position while the engine is not running. Failure to do so could cause the vehicle to move unexpectedly or roll away and result in serious personal injury or property damage.
Manual shift mode (if so equipped) When the manual shift mode button 䊊 A is pressed with the vehicle stopped or while driving, the transmission enters the manual shift mode. Shift ranges can be selected manually using the paddles on the steering wheel 䊊 B and 䊊 C .
● In the manual shift mode, the transmis- sion may shift up automatically to a higher range than selected if the en- gine speed is too high. When the ve- hicle speed decreases, the transmis- sion automatically shifts down. The transmission shifts to M1 (1st) gear before the vehicle comes to a com- plete stop.
Overdrive (O/D) OFF switch When the O/D OFF switch is pushed with the shift selector in the D (Drive) position, the light in the instrument panel illuminates. See “Overdrive off indicator light (CVT models)” in the “Instruments and controls” section of this manual.
CAUTION ● Do not rest your foot on the clutch pedal while driving. This may cause clutch damage. ● Fully depress the clutch pedal before shifting to help prevent transmission damage. ● Stop your vehicle completely before shifting into R (Reverse) .
Suggested maximum speed in each gear Downshift to a lower gear if the engine is not running smoothly , or if you need to accelerate. Do not exceed the maximum suggested speed (shown below) in any gear. For level road driving, use the highest gear suggested for that speed.
T o engage: Pull the lever up 䊊 A . T o release: 1. Firmly apply the foot brake. 2. Manual transmission models: Place the shift selector in the N (Neutral) position. CVT models: Move the shift selector to the P (Park) position. 3. While pulling up on the parking brake lever slightly , push the button and lower com- pletely 䊊 B .
CAUTION On manual transmission models, do not shift into N (Neutral) without depressing the clutch pedal when the cruise control is set. Should this occur, depress the clutch pedal and turn the main switch off imme- diately. Failure to do so may cause engine damage.
CAUTION During the first 1,200 miles (2,000 km) , follow these recommendations to obtain maximum engine performance and en- sure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in short- ened engine life and reduced engine performance.
WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) for CVT models or in an appropriate gear for manual transmission models.
WARNING ● If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering warning light illuminates with the engine running, there will be no power assist for the steering.
WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not work.
WARNING Do not pump the brake pedal. Doing so may result in increased stopping distances. Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer.
When the VDC system is operating, you may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and indicates that the VDC system is working prop- erly .
FREEING A FROZEN DOOR LOCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole, the remote keyless entry keyfob (if so equipped) or the NISSAN Intelligent K ey™ (if so equipped) .
● Whatever the condition, drive with cau- tion. Accelerate and slow down with care. If accelerating or downshifting too fast, the drive wheels will lose even more traction. ● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement.
MEMO 5-30 Starting and driving.
6 In case of emergency Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) (if so equipped) ................................6 - 2 Changing a flat tire .............................6 - 2 Jump starting .....
TIRE PRESSURE MONITORING SYSTEM (TPMS) (if so equipped) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the low tire pressure warning light is lit, one or more of your tires is significantly under-inflated.
WARNING ● Make sure the parking brake is securely applied and the manual transmission is shifted into R (Reverse) , or the CVT is shifted into P (Park) . ● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous.
2. T o remove the jack, turn the jack screw counterclockwise and lift out. Removing bolt-on wheel cover (if so equipped) CAUTION Do not use your hands to pry off wheel caps or wheel covers. Doing so could re- sult in personal injury. Wheel cover attachment to the wheel is made by one of the wheel lug nuts.
Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands. ● Use only the jack provided with your vehicle to lift the vehicle.
Always refer to the proper illustrations for the correct placement and jack -up points for your specific vehicle model and jack type. Carefully read the caution label attached to the jack body and the following instruc- tions. 1. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench.
4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence illustrated ( 䊊 A , 䊊 B , 䊊 C , 䊊 D ). Lower the vehicle completely . WARNING ● Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off.
WARNING ● Always make sure that the spare tire and jacking equipment are properly se- cured after use. Such items can become dangerous projectiles in an accident or sudden stop.
● If the battery of a vehicle equipped with the Intelligent Key system is dis- charged, the ignition switch cannot be moved from the LOCK position, even using the mechanical key or the valet key.
CAUTION ● Always connect positive ( ⫹ ) to positive ( ⫹ ) and negative ( ⫺ ) to body ground (for example, strut mounting bolt, engine lift bracket, etc .) — not to the battery. ● Make sure the jumper cables do not touch moving parts in the engine com- partment and that the cable clamps do not contact any other metal.
If your vehicle is overheating (indicated by an extremely high temperature gauge reading) , or if you feel a lack of engine power, detect abnormal noise, etc., take the following steps. WARNING ● Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire.
When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could dam- age your vehicle. T owing instructions are avail- able from a NISSAN dealer. Local service opera- tors are generally familiar with the applicable laws and procedures for towing.
T OWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated.
● When towing Continuously V ariable T ransmission (CVT) or manual trans- mission (M/T) models with the rear wheels on the ground (if you do not use towing dollies) : Always release the parking brake.
If your vehicle is stuck in sand, snow , mud, etc., use a tow strap or other device designed specifi- cally for vehicle recovery . Always follow the manufacturer’s instructions for the recovery de- vice. Do not use the tie-down hooks for towing or vehicle recovery .
MEMO 6-16 In case of emergency.
7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody .
In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads.
REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store.
CAUTION Follow the directions below to avoid staining or discoloring the wheels: ● Do not use a cleaner that uses strong acid or alkali contents to clean the wheels. ● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as am- bient temperature.
CAUTION ● Never use benzene, thinner, or any simi- lar material on the interior surfaces or surface damage may occur. Such dam- age is not covered under the NISSAN warranty. ● Small dirt particles can be abrasive and damaging to leather surfaces and should be removed promptly.
SEAT BELTS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belt maintenance” in the “Safety – Seats, seat belts and supplemen- tal restraint system” section of this manual.
CAUTION ● NEVER remove dirt, sand or other de- bris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner or broom. ● Never allow water or other liquids to come in contact with electronic compo- nents inside the vehicle as this may damage them.
MEMO 7-8 Appearance and care.
8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . .....................
Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance.
When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely .
and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange noises. Warning lights and chimes Make sure all warning lights and chimes are operating properly .
When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle.
MR20DE engine 1. Engine coolant reservoir 2. Engine oil filler cap 3. Brake fluid reservoir/Clutch fluid reservoir (M/T model) 4. Battery 5. Air cleaner 6.
QR25DE engine 1. Engine coolant reservoir 2. Engine oil filler cap 3. Brake fluid reservoir/Clutch fluid reservoir (M/T model) 4. Battery 5. Air cleaner 6. Fuse/Fusible link box 7. Radiator cap 8. Engine oil dipstick 9. Drive belt location 10. Windshield-washer fluid reservoir * Engine cover removed for clarity.
The engine cooling system is filled at the factory with Genuine NISSAN Engine Coolant to provide year-round anti-freeze and coolant protection. The anti-freeze solution contains rust and corro- sion inhibitors. Additional engine cooling system additives are not necessary .
CHANGING ENGINE COOLANT A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheat- ing. WARNING ● T o avoid the danger of being scalded, never change the coolant when the en- gine is hot.
5. Remove the dipstick again and check the oil level. It should be between the H (High) and L (Low) marks 䊊 B . This is the normal oper- ating oil level range. If the oil level is below the L (Low) mark 䊊 A , remove the oil filler cap and pour recommended oil through the opening.
CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature, then turn it off. 3. Remove the oil filler cap 䊊 A by turning it counterclockwise. 4.
CHANGING ENGINE OIL FILTER 1. Park the vehicle on a level surface and apply the parking brake. 2. T urn the engine off. 3. Place a large drain pan under the oil filter 䊊 C . 4. Loosen the oil filter with an oil filter wrench by turning it counterclockwise.
CAUTION ● Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluids. ● Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT , which is not covered by the NISSAN new vehicle limited warranty. When checking or replacement of CVT fluid is required, we recommend your NISSAN dealer for servicing.
CLUTCH FLUID Check the clutch fluid level in the reservoir (manual transmissions only) . Add Genuine NISSAN Brake Fluid or equivalent DO T 3 fluid up to the MAX line 䊊 A . If fluid must be added fre- quently , the system should be checked by a NISSAN dealer.
● K eep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge.
2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. . Reinstall the vent caps. V ehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level.
1. Crankshaft pulley 2. Idler Pulley 3. Automatic tensioner 4. W ater pump 5. Generator 6. Air conditioner compressor WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belt. The engine could rotate unexpectedly.
WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to re- move the spark plugs. An incorrect socket can damage the spark plugs. If replacement is required, see your NISSAN dealer for assistance.
5. Wipe the inside of the air cleaner filter hous- ing and the cover with a damp cloth. NO TE: After installing a new air cleaner, make sure the air cleaner cover is seated in the housing and latch the clips. WARNING ● Operating the engine with the air cleaner removed can cause you or oth- ers to be burned.
CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent.
If you wax the surface of the hood, be careful not to let wax get into the washer nozzle 䊊 A . This may cause clogging or improper windshield-washer operation. If wax gets into the nozzle, remove it with a needle or small pin 䊊 B . If the brakes do not operate properly , have the brakes checked by a NISSAN dealer.
T wo types of fuses are used. T ype 䊊 A is used in the fuse boxes in the engine compartment. T ype 䊊 B is used in the passenger compartment fuse box. T ype A fuses are provided as spare fuses. They are stored in the passenger compartment fuse box.
NO TE: For checking and replacing fuses on QR25DE engine models, see a NISSAN dealer. If any electrical equipment does not come on, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Open the engine hood. 3. Remove the fuse box cover by pushing the tabs 䊊 A and lifting the cover up from the front 䊊 B .
PASSENGER COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1.
CAUTION Be careful not to allow children to swallow the battery or removed parts. K EYFOB (if so equipped) Replace the battery in the keyfob as follows: 䊊 1 Open the lid using a coin 䊊 A . 䊊 2 Remove the battery 䊊 B . 䊊 3 Install a new battery 䊊 C with the “+” facing down.
● Do not touch the internal circuit and electric terminals as it could cause a malfunction. ● When changing the battery , do not let dust or oil get on the keyfob. ● There is danger of explosion if a lithium bat- tery is incorrectly replaced. Replace only with the same or equivalent type.
NISSAN INTELLIGENT K EY™ (if so equipped) Replace the battery in the Intelligent K ey as fol- lows: 1. Remove the mechanical key from the Intelli- gent K ey. 2. Insert a small screwdriver 䊊 A into the slit 䊊 B of the corner and twist it to separate the upper part from the lower part.
HEADLIGHTS Replacing the halogen headlight bulb The headlight is a semi-sealed beam type which uses a replaceable headlight (halogen) bulb. Be- cause the headlight assembly must be removed from the vehicle for bulb replacement, see your NISSAN dealer.
EXTERIOR AND INTERIOR LIGHTS Item W attage (W) Bulb No.* Headlight assembly Low/High (Halogen) 55/60 H13 T urn/Park 27/7 3457AK Side marker 4 194 Front fog light* (if so equipped) 55 H11LL Front map l.
1. Front map lights (if so equipped) 2. Interior light 3. Headlight assembly 4. Front fog light (if so equipped) 5. High-mounted stop light (if so equipped) 6.
Use a cloth 䊊 1 to protect the interior light hous- ing. Use a cloth 䊊 A to protect the light housing. If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual.
Tire inflation pressure Check the tire pressures (including the spare) often and always prior to long dis- tance trips. The recommended tire pres- sure specifications are shown on the F .M.V .S.S./C.M.V .S.S. certification label or the Tire and Loading Information label under the “Cold Tire Pressure” heading.
Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See “V ehicle load- ing information” in the “T echnical and consumer information” section.
Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage.
TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information iden- tifies and describes the fundamental characteristics of the tire and also pro- vides the tire identification number (TIN) for safety standard certification.
䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number.
䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown.
studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS CAUTION Tire chains/cables should not be installed on P225/45R17 size tires. Installation of the tire chains/cables on P225/45R17 size tires will cause damage to the vehicle.
Wheel nut tightening torque: 83 ft-lb (113 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure.
Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual.
Care of wheels ● W ash the wheels when washing the vehicle to maintain their appearance. ● Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed. ● Do not use abrasive cleaners when washing the wheels.
MEMO 8-42 Maintenance and do-it-yourself.
9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation . . .........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations .
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity.
FUEL RECOMMENDATION MR20DE and QR25DE engine except Spec-V Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . QR25DE engine Spec-V only Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) num- ber (Research octane number 96) .
● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol) . It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors.
ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section.
Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval.
ENGINE Model MR20DE QR25DE T ype Gasoline, 4-cycle, DOHC Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder, inline 4-cylinder, inline Bore x Stroke in (mm) 3.307 x 3.547 (84.0 x 90.1) 3.5 x 3.9 (89.0 x 100.0) Displacement cu in (cm 3 ) 121.86 (1,997) 151.
WHEELS AND TIRES Wheel type Size Offset in (mm) Steel 15 x 6.5JJ 1.77 (45) Aluminum and steel 16 x 6.5JJ 1.77 (45) Aluminum 17 x 7.0JJ 1.97 (50) Tire size P205/60R15 P205/55R16 P225/45VR17 P225/45WR17 Spare tire T125/70D16 DIMENSIONS AND WEIGHTS Unit: in (mm) Model MR20DE QR25DE Overall length 179.
When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICATION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .
EMISSION CONTROL INFORMATION LABEL The emission control information label is at- tached to the underside of the hood as shown. TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown.
Use the following steps to mount the front license plate: 䊊 1 Slide the metal mounting clips onto the li- cense plate holder as indicated. 䊊 2 Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the drill.
● GVW (Gross V ehicle W eight) - curb weight plus the combined weight of passengers and cargo. ● GVWR (Gross V ehicle W eight Rat- ing) - maximum total combined weight of the unloaded vehicle, pas- sengers, luggage, hitch, trailer tongue load and any other optional equipment.
Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle.
WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged.
T emperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease engine power.
T owing capacities are calculated assuming a base vehicle with driver and any options required to achieve the rating. Additional passengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle’s maximum towing capacity and trailer tongue load.
T OWING LOAD/SPECIFICATION T OWING LOAD / SPECIFICATION UNIT : lb (kg) MAXIMUM T OWING L OAD *1 1,000 (454) MAXIMUM T ONGUE L OAD 100 (45) *1: The towing capacity values are calculated assuming a base vehicle with driver and any options required to achieve the rating.
CAUTION ● Do not use axle-mounted hitches. ● The hitch should not be attached to or affect the operation of the impact- absorbing bumper. ● Do not modify the vehicle exhaust sys- tem, brake system, etc .
WARNING Never connect a trailer brake system di- rectly to the vehicle brake system. Pre-towing tips ● Be certain your vehicle maintains a level position when a loaded and/or unloaded trailer is hitched.
T o drive away: 1. Start the vehicle. 2. Apply and hold the brake pedal. 3. Shift the transmission into gear. 4. Release the parking brake. 5. Drive slowly until the vehicle and trailer are clear from the blocks. 6. Apply and hold the brake pedal. 7. Have someone retrieve and store the blocks.
● Some states or provinces have specific regulations and speed limits for vehicles that are towing trailers. Obey the local speed limits. ● Check your hitch, trailer wiring harness con- nections, and trailer wheel lug nuts after 50 miles (80 km) of travel and at every break.
DO T (Department of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.
Y our NISSAN vehicle is covered by the following emission warranties: For USA 1. Emission Defects W arranty 2. Emissions Performance W arranty Details of this warranty may be found with other vehicle warranties in your W arranty Information Booklet which comes with your NISSAN vehicle.
WARNING Always drive the vehicle in a safe and prudent manner according to traffic con- ditions and obey all traffic laws. 1. Start the engine when the engine coolant temperature gauge needle points to C. Al- low the engine to idle until the gauge needle points between the C and H (normal oper- ating temperature) .
T o read data recorded by an EDR, special equip- ment is required and access to the vehicle or the EDR is needed. In addition to the vehicle manu- facturer and NISSAN dealer, other parties, such as law enforcement, that have the special equip- ment, can read the information if they have ac- cess to the vehicle or the EDR.
Insist on the use of genuine NISSAN collision parts! If you want your vehicle to be restored using parts made to NISSAN’s original exacting specifica- tions – if you want to help it to last and hold its resale value, the solution is simple. T ell your insurance agent and your repair shop to only use Genuine NISSAN Collision Parts.
10 Index A ABS (Anti-lock Braking System) ....... .5-25 Air bag (See supplemental restraint system) .................... .1-43 Air bag system Front (See supplemental front impact air bag system) .............. .1-50 Side and curtain (See supplemental side air bag and curtain side-impact air bag system) .
Clutch Clutch fluid ................. .8-14 C.M.V .S.S. certification label ......... .9-10 Cold weather driving ............. .5-28 Compact disc (CD) player ........... .4-33, 4-36, 4-42, 4-47 Console box .................. .2-31 Continuously V ariable T ransmission (CVT) .
Front air bag system (See supplemental restraint system) ..... .1-50 Front seats .................... .1-2 Fuel Capacities and recommended fuel/lubricants ................ .9-2 Fuel economy ............... .5-22 Fuel gauge .................. .2-6 Fuel octane rating .
Light Air bag warning light ........ .1-58, 2-14 Brake light (See stop light) ........ .8-29 Bulb check/instrument panel ....... .2-10 Bulb replacement ............. .8-29 Charge warning light ........... .2-11 Fog light switch .............. .2-24 Headlight and turn signal switch .
Precautions on supplemental restraint system ................... .1-43 Precautions when starting and driving . . . .5-2 Programmable features ............. .4-5 Push starting .................. .6-10 R Radio Car phone or CB radio .......... .4-62 FM/AM radio with compact disc (CD) player .
Switch Automatic power window switch ..... .2-35 Fog light switch .............. .2-24 Hazard warning flasher switch ...... .2-24 Headlight and turn signal switch ..... .2-22 Headlight control switch ......... .2-22 Ignition switch ................ .5-7 Power door lock switch .
W arning labels (for SRS) ......... .1-58 W arning/indicator lights and audible reminders .................. .2-9 W arning lights .................. .2-9 W asher switch Windshield wiper and washer switch . . .2-20 W eights (See dimensions and weights) .
RECOMMENDED FUEL: MR20DE and QR25DE engine except Spec-V Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . QR25DE engine Spec-V only Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) num- ber (Research octane number 96) .
® 2010 S E NTRA OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle. 2010 N IS SAN SE NTRA B16-D Printing : February 2010 Publication No.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Nissan 2010 Sentra è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Nissan 2010 Sentra - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Nissan 2010 Sentra imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Nissan 2010 Sentra ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Nissan 2010 Sentra, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Nissan 2010 Sentra.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Nissan 2010 Sentra. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Nissan 2010 Sentra insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
