Manuale d’uso / di manutenzione del prodotto N8406-022 del fabbricante NEC
Vai alla pagina of 102
N8406-022 1Gb Intelligent L2 Switch Command Reference Guide (ISCLI) Part number: 856-126757-301-00 First edition: Jan 2007.
2 Legal notices © 2007 NEC Corporation The information contained herein is subject to change without notice. The onl y warra nties for NEC products and services are set forth in the express warranty statements accompanying such products and se rvices.
ISCLI Reference 3 Contents ISCLI Reference Introduction ............................................................................................................................................................. 6 Additional references .............
ISCLI Reference 4 Statistics command s Introduction ........................................................................................................................................................... 41 Port Statistics ........................
ISCLI Reference 5 VLAN configuration ......................................................................................................................................... 82 Layer 3 configuration ...................................................
ISCLI Reference 6 ISCLI Reference Introduction The 1Gb Intelligent L2 Switch is ready to perform b asic swit ching functions right out of the box. Som e of the more advanced features, however, require some administrat ive configuration bef ore th ey can be used effectivel y.
ISCLI Reference 7 To establish a console conn ection with the switch: 1. Connect the terminal to the cons ole port using the nu ll modem cable. 2. Power on the terminal. 3. Press the Enter key a few times on the terminal to establish the connection. 4.
ISCLI Reference 8 The supported SSH encryption and auth entication methods are listed b elow. • Server Host Authentication—Client RSA authenticat es the s witch in the beginning of ever y connecti.
ISCLI Reference 9 Table 2 User access levels User account Description and tasks performed User The User has no direct responsibility for sw itch management. He or she can view all switch status information and statistics, but cannot ma ke any configuration changes to the switch.
ISCLI Reference 10 Typeface or symbol Meaning brackets [ ] Indicate optional elements in syntax descriptions. Do not type the brackets when entering the command. Example: If the command syntax is show ip interface [< 1-256 >] you can enter show ip interface or show ip interface 1 italic text Indicates variables in command syntax descriptions.
ISCLI basics 11 ISCLI basics Introduction The ISCLI is used for viewing switch information and statis tics. In ad dition, the administrator can use the CLI for performing all levels of switch configuration.
ISCLI basics 12 Global commands Some basic commands are recognized thr oughout the ISCLI hierarchy. These comma nds are useful for obtaining online Help, navigating thro ugh the interface, and saving c onfiguration changes. T o get help about a specific command, type the command, followed by help .
ISCLI basics 13 Command line interfac e shortcuts The following shortcuts allo w you to enter commands quickly and easily. Command abbreviation Most commands can be abbreviated by entering the first c hara cters that distinguish the command from the others in the same mode.
Information Commands 14 Information Commands Introduction You can view configuration information for the s witch in the ISCLI. This chapter discusses how to use the ISCLI to display switch information. The following table describes ge neral information comman ds.
Information Commands 15 System Information commands The following table describes the System Information comman ds. Table 6 System Information commands Command Usage show snmp-server v3 Displays SNMP v3 information.
Information Commands 16 SNMPv3 USM User Table information The following command displays SNMPv3 user information: show snmp-server v3 user Command mode: All The User-based Security Mode l (USM) in SNMPv3 provides security services such as authentication and pri vacy of messages.
Information Commands 17 The following table describes the SNMPv 3 View Table information. Table 9 View Table param eters Field Description View Name Displays the name of the view. Subtree Displays the MIB subtree as an OID string. A view subtree is the set of all MIB object instances which have a common Obje ct Identifier prefix to their names.
Information Commands 18 SNMPv3 Group Table information The following command displays SNMPv3 group information: show snmp-server v3 group Command mode: All Sec Model User Name Group Name ---------- --.
Information Commands 19 SNMPv3 Target Address Table information The following command displays SNMPv3 target address information: show snmp-server v3 target-address Command mode: All Name Transport Addr Port Taglist Params ---------- --------------- ---- ---------- --------------- trap1 47.
Information Commands 20 SNMPv3 Notify Table information The following command displays the SNMPv3 Notify Table: show snmp-server v3 notify Command mode: All Name Tag -------------------- -------------------- v1v2trap v1v2trap The following table describes the SNMPv 3 Notify Table information.
Information Commands 21 SNMPv3 dump The following command disp lays SNMPv3 information: show snmp-server v3 Command mode: All Engine ID = 80:00:07:50:03:00:0F:6A:F8:EF:00 usmUser Table: User Name Prot.
Information Commands 22 System information The following command displays system information: show sys-info Command mode: All System Information at 6:56:22 Thu Jan 11, 2006 Time zone: Asia/Tokyo Blade.
Information Commands 23 Show recent syslog messages The following command displays system log messages: show logging messages Command mode: All Date Time Severity level Message ---- ---- -------------.
Information Commands 24 The following table describes the us er status information. Table 16 User status Information Field Usage user Displays the status of the user access level. oper Displays the status of the oper (operator) access level. admin Displays the status of the admin (administrator) access level.
Information Commands 25 FDB information commands The forwarding database (FDB) contains inform ation that maps the media access control (MAC) a ddress of each known device to the switch port where the devic e addre ss was learned. T he FDB also shows which other ports have seen frames destined for a particular MAC address.
Information Commands 26 S panning T r ee information The following command displays Spanning T ree information: show spanning-tree stp <1-32> information Command mode: All ----------------------.
Information Commands 27 Table 19 STP parameters Parameter Description FwdDel The forward delay parameter specifies, in seconds, the amount of time that a bridge por t has to wait before it changes from learning state to forwarding state.
Information Commands 28 The switch software can be set to use the IEEE 802.1w Rapid Spanning T ree Protocol (RSTP) or the IEEE 802.1s Multiple Spanning Tr ee Protocol (MSTP).
Information Commands 29 Common Internal S panning T ree information The following command displays Common In ternal Spanning T ree (CIST) information: show spanning-tree mstp cist information Command .
Information Commands 30 You can also refer to the following port-specific CIST information: • Port number and priority • Cost • State • Role • Designated bridge and port • Hello interval • Link type and port type The following table describes the CIST parameters.
Information Commands 31 T runk group information The following command displays Trunk Group information: show portchannel information Command mode: All Trunk group 1, Enabled port state: 17: STG 1 forwarding 18: STG 1 forwarding When trunk groups are configure d, you can view t he state of each port in the various tru nk groups.
Information Commands 32 Layer 3 information The following table describes bas ic Layer 3 Information commands. T he following sections provide more detai led information and commands.
Information Commands 33 Show all ARP entry information The following command di splays ARP information: show ip arp Command mode: All except User EXEC IP address Flags MAC address VLAN Port --------------- ----- ----------------- ---- ---- 192.168.2.4 00:50:8b:b2:32:cb 1 18 192.
Information Commands 34 IGMP multicast group information The following table describes the comm ands used to disp lay informati on about IGMP groups learned by the s witch. Table 25 IGMP Multicast Group commands Command Usage show ip igmp groups address <IP address> Displays a single IGMP multicast group by its IP address.
Information Commands 35 The following table describes the RMON Histor y Information parameters. Table 27 RMON History Information Command Usage Index Displays the index number that identifies each history instance. IFOID Displays the MIB Object Identifier.
Information Commands 36 The following table describes the RMON Alarm Information pa rameters. Table 28 RMON Alarm Information Command Usage Index Displays the index number that identifies each alarm instance. Interval Displays the time interval over which data is sampled and compared with the rising and falling thresholds.
Information Commands 37 Link status information The following command displays link information: show interface link Command mode: All except User EXEC ------------------------------------------------.
Information Commands 38 Port information The following command disp lays port information: show interface information Command mode: All except User EXEC Port Tag RMON PVID NAME VLAN(s) ---- --- ---- -.
Information Commands 39 Logical Port to GEA Port mapping The following command dis plays information about GEA ports: show geaport Command mode: All Logical Port GEA Port(0-based) GEA Unit -----------.
Information Commands 40 Information dump The following command dumps s witch information: show information-dump Command mode: All Use the dump command to dump all s witch information avail able from this switch memor y (10K or more, depending on your configuration).
Statistics commands 41 S t atistics commands Introduction You can view switch performance statistics in the us er, operator, and a dministrator command modes. This chapter discusses how to use the ISCLI to display switch statistics. The following table describes gener al Statistics commands.
Statistics commands 42 Bridging statistics Use the following command to displa y the br idging statistics of the selected port: show interface gigabitethernet <port number> bridging-counters Com.
Statistics commands 43 The following table describes the Et her net statistics for a selected port: Table 33 Ethernet statistics for port Statistics Description dot3StatsAlignmentErrors A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the Frame Check Sequence (FCS) check.
Statistics commands 44 Table 33 Ethernet statistics for port Statistics Description dot3StatsFrameTooLongs A count of frames received on a pa rticular interface that exceeds the maximum permitted frame size.
Statistics commands 45 Table 34 Interface statistics for port Statistics Description UcastPkts—IfHCOut The total number of packets that hi gher-level protocols requested to be transmitted, and which were not address ed to a multicast or broadcast address at this sublayer, including those t hat were discarded or not sent.
Statistics commands 46 Link statistics Use the following command to display th e link statistics of the selected port: show interface gigabitethernet <port number> link-counters Command mode: Al.
Statistics commands 47 Layer 3 statistics The following table describes bas ic Layer 3 statistics co mmands. The follo wing sections provide more detailed information and commands. Layer 3 function ality is limited in this rele ase. Table 39 Layer 3 Statistics commands Command Usage show ip counters Displays IP statistics.
Statistics commands 48 Table 40 IP statistics Statistics Description ipInDiscards The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but whic h were discarded (for example, for lack of buffer space).
Statistics commands 49 DNS statistics show ip dns counters Command mode: All except User EXEC DNS statistics: dnsInRequests: 0 dnsOutRequests: 0 dnsBadRequests: 0 The following table describes the D o.
Statistics commands 50 Table 43 ICMP statistics Statistics Description icmpOutDestUnreachs The number of ICMP Destinati on Unreachable messages sent. icmpOutTimeExcds The number of ICMP Time Exceeded messages sent. icmpOutParmProbs The number of ICMP Parameter Problem m essages sent.
Statistics commands 51 Table 44 TCP statistics Statistics Description tcpRetransSegs The total number of segments retransmitted, that is, the number of TCP segm ents transmitted containing one or more previously transmitted octets. tcpInErrs The total number of segments received in error (for exam ple, bad TCP checksums).
Statistics commands 52 IGMP Multicast Group statistics The following command displays statistics about the use of the IGMP Multicast Groups: show ip igmp counters Command mode: All except User EXEC En.
Statistics commands 53 TCP statistics The following command displays T CP statistics: show mp tcp-block Command mode: All except User EXEC All TCP allocated control blocks: 10ad41e8: 0.0.0.0 0 <=> 0.0.0.0 80 listen 10ad5790: 47.81.27.5 1171 <=> 47.
Statistics commands 54 CPU statistics The following command displays the CPU utilization statistics: show mp cpu Command mode: All except User EXEC CPU utilization: cpuUtil1Second: 8% cpuUtil4Seconds:.
Statistics commands 55 Table 51 SNMP statistics Statistics Description snmpInASNParseErrs The total number of ASN.1 (Abstract Syntax Notation One ) or BER (Basic Encoding Rules), errors encountered by the SNMP protocol entity when decoding SNMP messages received.
Statistics commands 56 Table 51 SNMP statistics Statistics Description snmpOutGenErrs The total number of SNMP Protocol Data Units (PDUs), which were gene rated by the SNMP protocol entity and for whic h the value of the erro r-status field is genErr.
Statistics commands 57 The following table describes the NT P statistics: Table 52 NTP statistics Statistics Description Primary Server Requests Sent: The total number of NTP requests the s witch sent to the primary NTP server to synchronize time. Responses Received: The total number of NTP responses received from the primary NTP server.
Configuration Commands 58 Configuration Commands Introduction The Configuration commands ar e available only from an administrator log in. They include commands for configuring every aspect of the swit ch. Changes can be saved to non-volatil e memory (NVRAM).
Configuration Commands 59 Table 55 System Configuration comma nds Command Usage [no] system notice <1-1024 characters multi-line> <’-‘ to end> Displays login notice immediatel y before the “Enter password:” prompt. This notice can contai n up to 1024 characters and new lines.
Configuration Commands 60 Table 56 Syslog Configuration comma nds Command Description [no] logging log { <feature> } Displays a list of features for which syslog messages can be generated. You can choose to enable/disable specific features or enable/disable sy slog on all available features.
Configuration Commands 61 Table 57 SSHD Configuration comm ands Command Description no ssh scp-enable Disables the SCP apply and save. This is the default for SCP. Command mode: Global configuration ssh enable Enables the SSH server. Command mode: Global configuration no ssh enable Disables the SSH server.
Configuration Commands 62 TACACS+ server configuration TACACS+ (Terminal Access Controller Access Control Syste m) is an authentication protoc ol that allows a remote access server to forward a user's logon pass word to an authentication server to det ermine whether access can be allowed to a given system.
Configuration Commands 63 IMPORTANT: If TACACS+ is enabled, you must l ogin usi ng TACACS+ authentication when connecting via the console or Telnet/SSH/HTTP/HTTPS. Backdoor for c onsole is al ways enabled, so you can con nect using notacacs and the administrator password even if the backdoor ( telnet ) or secure back door ( secbd ) are disabled.
Configuration Commands 64 System SNMP configuration The switch software supports SNMP-based network managem ent. In SNMP model of network management, a management station (client/manager) accesses a set of variables k nown as MIBs (Management Information Bas e) provided by the managed devic e (agent).
Configuration Commands 65 SNMPv3 configuration SNMP version 3 (SNMPv3) is an extensible SNMP Fr amework that supplement s the SNMPv2 Framework by supporting the following: • a new SNMP message forma.
Configuration Commands 66 User Security Model configuration You can make use of a defined set of user identities us in g this Security Model. An SNMP engine must hav e the knowledge of applicable attributes of a us er. These commands help yo u create a user security model entry for an authorize d user.
Configuration Commands 67 SNMPv3 View configuration The following table describes the SNMPv 3 View Configuration commands. Table 64 SNMPv3 View Configuration comma nds Command Description snmp-server view <1-128> name <1-32 characters> Defines the name for a family of vi ew subtrees up to a maximum of 32 characters.
Configuration Commands 68 Table 65 View-based Access Control Co nfiguration commands Command Description show snmp-server access <1-32> Displays the View-based Access Control configuration. Command mode: All SNMPv3 Group configuration The following table describes the SNMPv 3 Group Configuration commands.
Configuration Commands 69 SNMPv3 Target Address Table configuration These commands allo w you to configure an entry of a transport address that tra nsmits SNMP traps. The following table describes the SNMPv 3 Target Address Table Configuration commands.
Configuration Commands 70 SNMPv3 Notify Table configuration SNMPv3 uses Notificati on Originator to send out traps. A notificati on typically monitors a system for particular events or conditions, and generates Notification- Cla ss messages based on these events or con ditions.
Configuration Commands 71 User Access Control configuration The following table describes the Us er Access Control commands. Table 73 User Access Control Configur ation commands Command Description access user <1-10> Configures the User ID.
Configuration Commands 72 HTTPS Access configuration The following table describes the HT TPS Access Configuration commands. Table 75 HTTP S Access Configuration commands Command Description [no] access https enable Enables or disables BBI a ccess (Web access) using HTTPS.
Configuration Commands 73 Port configuration Use the port configuration commands to conf igure settings for individual s witch ports. NOTE: Port 19 is reserved for switch management. The following table describes the Port Co nfiguration commands. The follo wing sections provide mor e detailed information and commands.
Configuration Commands 74 Port link configuration Use these commands to set port parameters for the port link. Link commands are described in the follo wing table. Us ing these commands, you can set p ort parameters such as speed, duplex, flow control, and negotiation mode for the port link.
Configuration Commands 75 Rapid S panning T ree Protocol / Multiple S panning T ree Protocol configuration The switch supports the IEEE 802.1w Rapid Spann ing Tr ee Protocol (RST P) and IEEE 802.1s Multiple Spanning Tree Protocol (MSTP). MST P allows you to map many VLANs to a small number of spanning tree grou ps, each with i ts own topol ogy.
Configuration Commands 76 Common Internal Spanning Tree configuration The Common Internal Spanning Tree (CIST) provides com patibilit y with different MSTP regions and with devices running different Spanning T ree instances. It is equivalent to Spanni ng Tree Group 0.
Configuration Commands 77 CIST port configuration CIST port parameters are used to modify MRST operation on an indiv idual port basis. CIST parameters do not affect operation of STP/PVST.
Configuration Commands 78 S panning T r ee configuration The switch supports the IEEE 802.1d Spanning T ree Protocol (STP) and Cisco pro prietary PVST and PVST+ protocols. You can configure up to 31 spanni ng tree groups on the s witch (STG 32 is reserved for switch management).
Configuration Commands 79 Bridge Spanning Tree configuration Spanning tree bridge parameters can b e configured for each Spanning T ree Group. STP bridge parameters include: • Bridge priority • Br.
Configuration Commands 80 Spanning Tree port configuration By default for STP/PVST+, Spanning tree is turned Off for downlink ports (1-16), and turned On for cross-connect ports (17-18), and uplink ports (20-24).
Configuration Commands 81 Forwarding Database configuration The following table describes the F orw arding Database Config uration commands. Table 86 FDB Configuration comman ds Command Description aging < 0-65535 > Configures the aging value for FDB entries.
Configuration Commands 82 VLAN configuration The commands in this section configur e VLAN attributes , change the status of the VLAN, delete th e VLAN, and change the port membership of the VLAN. By default, the VLANs are disabled exc ept VLAN 1, which is always enabled.
Configuration Commands 83 IP interface configuration The switch can be configured with up to 256 IP interfaces . Each IP interface represents the s witch on an IP subnet on your network. The IP Interface option is disa bled by default. Interface 256 is reserved for s witch management.
Configuration Commands 84 Address Resolution Protocol configuration Address Resolution Protocol (ARP) is the T CP/IP protocol that resides within the Inte rnet layer. ARP resolves a physical address from an IP address. ARP quer ies machines on the local network for their ph ysical addresses.
Configuration Commands 85 Table 94 IGMP Snooping commands Command Description [no] ip igmp snoop vlan <1-4095> fastleave Enables or disables Fastleave processing. Fastleave allows the switch to immediately remove a port from the IGMP port list, if the host sends a Leave mess age, and the proper conditions are met.
Configuration Commands 86 IGMP filter definition The following table describes the IGMP Filter Definiti on commands. Table 97 IGMP Filter Definition commands Command Description ip igmp profile <1-16> range <IP multicast address> <IP multicast address> Configures the range of IP multicast addresses for this filter.
Configuration Commands 87 Remote Monitoring configuration Remote Monitoring (RMON) allows you to monitor traffi c flo wing through the switch. The RMON MIB is described in RFC 1757. The following table describes t he RMON Config uration commands. Table 100 RMON commands Command Description show rmon Displays the current RMON configuration.
Configuration Commands 88 Table 102 RMON Event commands Command Description no rmon event <1-65535> Deletes this event index. Command mode: Glo bal configuration show rmon event Displays the current RMON Event parameters. Command mode: All RMON alarm configuration The Alarm RMON group can track rising or falling valu es for a MIB object.
Configuration Commands 89 Port mirroring Port Mirroring is used to configure, enable, and disabl e the monitored port. Whe n enabled, network packets being sent and/or received on a target port are duplicated an d sent to a monitor port.
Configuration Commands 90 Failure Detection Pair configuration Use these commands to configure a Fail ure Detection Pair , which consists of one Link to Mon itor (LtM) and one Link to Disable (LtD). When the s witch detects a failure on the LtM, it automatically di sables the ports in the LtD.
Configuration Commands 91 Saving the active switch configuration When the copy running-config tftp command is used, the active configur ation commands of the switch will be uploaded to the specified script conf igur ation file on the TFT P server.
Operations Commands 92 Operations Commands Introduction Operations-level commands are used for making imm edi ate and temporary cha nges to s witch configuration. Operations commands are used for bringing ports temporari ly in and out of service. These commands are av ailable only from an administrator and operator lo gin.
Boot Options 93 Boot Options Introduction You must be logged in to the switch as the ad ministrator to use the Boot Optio ns commands. The Boot Options allow you to perform the follo wing functions: • Select a switch software image to be used when the switch is next reloaded.
Boot Options 94 5. The system prompts you to confirm your request. You should next select a software image to run, as described in the “Selecting a Soft Image to Ru n” section. 6. If you are loading an image from which you are not cu rrently booted, the system prompts you to change the image.
Boot Options 95 5. The system then requests confirmation of what you have enter ed. To have the file uploaded, enter y. image2 currently contains Software Version 1.1.0 Upload will transfer image2 (1889411 bytes) to file "test" on TFTP server 192.
Maintenance Commands 96 Maintenance Commands Introduction The Maintenance commands are used for debugging purpose s, enabling yo u to generate a technic al support dump of the critical state information in the switch, and to clear entries in the For warding Database and the Address Resolution Protocol (ARP) and routing tables.
Maintenance Commands 97 Debugging options The Miscellaneous Debug comma nds display trace buffer information about events that can be helpful i n understanding switch operation.
Maintenance Commands 98 IGMP Snooping maintenance The following table describes the IGMP Snoop ing Maintenance commands. Table 116 IGMP Snooping Maintenanc e commands Command Usage show ip igmp groups address <IP address> Shows a single IGMP Multicast group by IP address.
Maintenance Commands 99 TFTP system dump put Use this command to put (save) the system dump to a TFTP server. NOTE: If the TFTP server is running SunOS or the Solaris operati ng system, the specified .
Maintenance Commands 100 Unscheduled system dump s If there is an unscheduled system dump to flash memor y, the following message is displayed when you log on to the sw itch: Note: A system dump exists in FLASH. The dump was saved at 13:43:22 Wednesday October 30, 2006.
Index 101 Index A abbreviating commands, 14 access control, user, 70 active configuration block, 59, 97 active switch configuration: gtcfg, 93; ptcfg, 92; restoring, 93 Address Resolution Protocol (AR.
Index 102 S save command, 13, 97 save n command, 13 secret, radius server, 62 Secure Shell (SSH): encryption and authentication methods, 9 Secure Shell Server (SSHD) Menu, 61 shortcuts, 14 snap traces.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il NEC N8406-022 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del NEC N8406-022 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso NEC N8406-022 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul NEC N8406-022 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il NEC N8406-022, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del NEC N8406-022.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il NEC N8406-022. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo NEC N8406-022 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
