Manuale d’uso / di manutenzione del prodotto MultiSync LCD2080UXI-BK del fabbricante NEC
Vai alla pagina of 54
1-1 User's Manual 1. A Vers ion Mu lt iS ync ® L CD2080UX i TM.
1-2 Inde x Warning .................................................................................................................... 1 Cont ents .......................................................................................................
1-3 1 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
1-4 2 Content s Your new NEC MultiSync ® LCD monitor box* should contain the following: • MultiSync LCD 2080UXi™ monitor with tilt/swivel/pivot/adjustable stand • Power Cord • Video Signal Ca.
1-5 3 Quick S t ar t T o attach the MultiSync ® LCD monitor to your system, follow these instr uctions: 1. T urn off the power to your computer . 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.
1-6 4 Quick S t ar t –continued Raise and Lower Monitor Screen The monitor may be raised or lowered in either Portrait or Landscape mode. To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.
1-7 5 Quick S t ar t –continued Screen Rotation Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching your fingers. To raise the screen, place hands on each side of the monitor and lift up to the highest position ( Figure RL.
1-8 6 Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place hands on each side of the monitor and lift up to the highest position. 3. Place monitor face down on a nonabrasive surface.
1-9 7 Long Cable Compensation Adjustment T o per form the long cable compensation adjustment, use the following steps: Set the Auto Adjust Level (Auto SW) to “DET AIL” in the Advanced OSM T o enter the Advanced OSM • T ur n off your monitor .
1-10 8 OSM ® (On-Screen Manager) control buttons on the front of the monitor function as follows: To access OSM menu, press any of the control buttons ( , , – , + ). To change signal input, press the SELECT button. NOTE: OSM must be closed in order to change signal input.
1-11 9 C ontr ols –continued width of the picture. Use left/Right Menu to center the image on the screen. If the H.Size is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous. FINE (Analog input only) Improves focus, clarity and image stability by increasing or decreasing this setting.
1-12 10 CUSTOM (Digital input and Resolution of 1600 x 1200 only): Select one of nine expansion rates. In this mode the resolution may be low and there may be blank areas. This mode is for use with special video cards. VIDEO DETECT: Selects the method of video detection when more than one computer is connected.
1-13 11 OSM Turn Off submenu, you can select how long the monitor waits after the last touch of a button to shut off the OSM control menu. The preset choices are 10, 20, 30, 45, 60 and 120 seconds. OSM LOCK OUT: This control completely locks out access to all OSM control functions.
1-14 12 R e commende d Us e Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
1-15 13 R e commende d Us e –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
1-16 14 S p e c if ications Monitor MultiSync ® LCD 2080UXi Notes Specifications Monitor LCD Module Diagonal: 20.1 inch Active matrix; thin film transistor (TFT) Viewable Image Size: 20.
1-17 15 Fe atu r e s ambix ® T echnology: Dual input technology allowing both analog and digital inputs of f of one connector (DVI-I) as well as additional legacy analog support of f of a traditional 15- pin VGA connector .
1-18 16 (such as screen size and resolutions supported) directly to your computer, automatically optimizing display performance. IPM ® (Intelligent Power Manager) System: Provides innovative power-sa.
1-19 17 T r oub le sho oting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Check the Vacation Switch should be in the ON position. • Front Power Switch and computer power switch should be in the ON position.
1-20 18 R e f er ence s NEC Monitor Customer Ser vice & Suppor t Customer Ser vice and T echnical Suppor t: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (800) 632-4662 W arranty Information: www .necdisplay .com Online T echnical Suppor t www .
1-21 19 Limite d Warr ant y NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrants this Product to be free from defects in material and workmanship and, subject to t.
1-22 20 T C O’03 White Model Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
1-23 21 T C O’03 –continued NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in tr ying to minimize the burden placed on the environment.
1-24 22 T C O’99 Black Model Congratulations! You have just purchased a TCO’99 approved and labelled product!Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
1-25 23 T C O’99 –continued accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur. TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound chlorine and bromine.
1-26 24 Declaration of the Manufacturer W e hereby cer tify that the color monitor MultiSync ® LCD2080UXi (L202EV) is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: – EN 55022 – EN 61000-3-2 – EN 61000-3-3 – EN 55024 and marked with NEC Display Solutions, Ltd.
1-27 49 App endix If you need detailed information about the controls, please use the advanced menu. <How to use the advanced menu> • T urn of f your monitor . • T urn on your monitor by pushing the "POWER" and "SELECT" button at the same time for at least one second simultaneously .
1-28 50 App endix –continued Tag4 Auto Automatically adjusts the Image Position and H. Size settings and Fine (Analog input only) settings. Press "SELECT" to activate Auto Adjustment. H. Position Controls Horizontal Image Position within the display area of the LCD.
1-29 51 T ag7 Sharpness This is a digital capability for keeping a crisp image at all signal timings. It continuously adjusts to maintain a distinct or soft image as you prefer , and is set independently according to different timings.
1-30 52 OSM Lock Out This control completely locks out access to all OSM control functions. When attempting to activate OSM controls while in the Lock Out mode, a screen will appear in di cati ng the OSM controls are locked out. T o activate the OSM Lock Out function, press SELECT , then + key and hold down simultaneously .
1-31 NEC LCD Series PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Display Solutions of America, Inc.
1-32 2. B Vers ion MultiSync LCD2080UXi User’ s Manual.
1-33 Index W ar ning, Caution ............................................................................................................... ............ English-1 Declaration ..........................................................................
1-34 English English-1 W ARNING CA UTION CA UTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FR OM W ALL SOCKET . T O FULL Y DISENGA GE THE PO WER T O THE UNIT , PLEASE DISCONNECT THE POWER CORD FR OM THE A C OUTLET .DO NOT REMO VE COVER (OR BA CK).
1-35 English-2 Canadian Depar tment of Comm unications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interf erence-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.
1-36 English English-3 Contents Y our new NEC MultiSync LCD monitor box* should contain the f ollowing: • MultiSync LCD2080UXi monitor with tilt/s wivel/pivot/height adjust stand • P ower Cord •.
1-37 English-4 Quic k Star t T o attach the MultiSync LCD monitor to your system, f ollow these instructions: 1. T urn off the power to your computer . 2. For the PC or MA C with DVI digital output: Connect the D VI signal cable to the connector of the display card in y our system ( Figure A.
1-38 English English-5 Figure C.1 Figure C.2 Figure D .1 Figure RL.1 INPUT2 INPUT1 V acation Switch P ower Button NEC optional product attachment. Do not use this connector unless specified. INPUT2 INPUT1 Raise and Lower Monitor Screen The monitor may be r aised or lowered in either P or trait or Landscape mode.
1-39 English-6 Tilt Grasp top and bottom sides of the monitor screen with your hands and adjust the tilt as desired ( Figure TS.1 ). Figure TS.1 Figure S.1 Swivel Grasp both sides of the monitor screen with your hands and adjust the swiv el as desired ( Figure TS.
1-40 English English-7 Contr ols OSM (On-Screen Manager) control b uttons on the front of the monitor function as follo ws: T o access OSM menu, press an y of the control buttons (EXIT , , , –, +). T o change signal input, press the SELECT button. NO TE: OSM must be closed in order to change signal input.
1-41 English-8 FINE (Analog input only) Improves focus, clarity and image stability by increasing or decreasing this setting. If the “Auto Adjust function” and the “H.Siz e” function do not give y ou a satisfactory picture setting, a fine tuning can be performed using the “Fine” function.
1-42 English English-9 OFF TIMER: Monitor will automatically power-down when the end user has selected a pre-determined amount of time. T ools 2 LANGU AGE: OSM control menus are av ailable in sev en languages. OSM POSITION: Y ou can choose where you w ould like the OSM control image to appear on your screen.
1-43 English-10 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NO TE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TISYNC LCD COLOUR MONIT OR: • DO NO T OPEN THE MONITOR. There are no user serviceable par ts inside and opening or removing cov ers may e xpose you to dangerous shoc k hazards or other r isks.
1-44 English English-11 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN Y OU POSITION THE MONIT OR: • F or optimum performance, allow 20 min utes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly belo w eye le vel.
1-45 English-12 Specifications Monitor Specifications MultiSync LCD2080UXi Monitor Notes LCD Module Diagonal: 51 cm/20.1 inches Active matrix; thin film transistor (TFT) liquid Viewab le Image Size: 51 cm/20.
1-46 English English-13 Features ambix T echnology: Dual input technology allowing both analog and digital inputs off of one connector (D VI-I) as well as additional legacy analog suppor t off of a traditional 15-pin VGA connector .
1-47 English-14 T roubleshooting No picture • The signal cab le should be completely connected to the display card/computer . • The displa y card should be completely seated in its slot. • Chec k the V acation Switch should be in the ON position.
1-48 English English-15 Appendix If you need detailed inf or mation about the controls, please use the advanced menu. <How to use the adv anced menu> • T ur n off your monitor . • T ur n on your monitor b y pushing the “POWER” and “SELECT” button at the same time for at least one second simultaneously .
1-49 English-16 T ag4 Auto Automatically adjusts the Image P osition and H. Size settings and Fine settings . (Analog input only) Press “SELECT” to activate A uto Adjustment. H. Position Controls Horizontal Image Position within the display area of the LCD.
1-50 English English-17 T ag7 Sharpness This is a digital capability for k eeping a cr isp image at all signal timings. It continuously adjusts to maintain a distinct or soft image as you pref er, and is set independently according to different timings .
1-51 English-18 OSM Rotation T o s witch OSM between Landscape and Portrait modes. Press “+” or “-” to select. Resolution Notifier The optimal resolution is 1600 x 1200. If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not set to 1600 x 1200.
1-52 English English-19 Congratulations! Y ou hav e just purchased a TCO’99 approv ed and labeled product! Y our choice has provided you with a product de veloped for professional use . Y our purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
1-53 English-20 TCO’03 (White model) Congratulations! The displa y you ha ve just purchased carries the TCO’03 Displays label. This means that your displa y is designed, manuf actured and tested according to some of the strictest quality and environmental requirements in the world.
1-54 English English-21 Manufacturer’ s Recyc ling and Energy Inf ormation NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’ s top priorities in tr ying to minimize the burden placed on the environment.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il NEC MultiSync LCD2080UXI-BK è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del NEC MultiSync LCD2080UXI-BK - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso NEC MultiSync LCD2080UXI-BK imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul NEC MultiSync LCD2080UXI-BK ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il NEC MultiSync LCD2080UXI-BK, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del NEC MultiSync LCD2080UXI-BK.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il NEC MultiSync LCD2080UXI-BK. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo NEC MultiSync LCD2080UXI-BK insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
