Manuale d’uso / di manutenzione del prodotto TRACKER 5600 del fabbricante Navman
Vai alla pagina of 42
CHARTPLOTTERS NA VMAN Installation and Operation Manual www .navman.com English ............. 2 Español .......... 41 Português ...... 79 TRA CKER 5600.
2 TRACKER 5600 Installation and Operation Manual NAVMAN FCC St atement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a normal installation.
3 TRACKER 5600 Installation and Operation Manual NAVMAN Contents 1 Introduction ..................................................................................................... 6 1-1 Care ..........................................................
4 TRACKER 5600 Installation and Operation Manual NAVMAN 1 10 Routes ........................................................................................................ 22 10-1 Routes display .......................................................
5 TRACKER 5600 Installation and Operation Manual NAVMAN It is the owner ’ s sole responsibility to install and use the instrument in a manner that will not cause accidents, personal injury or property damage. The user of this product is solely responsible for observing safe boating practices.
6 TRACKER 5600 Installation and Operation Manual NAVMAN 6 1-2 Plug-in cards 1 Introduction TRACKER chartplotters NA VMAN’s TRACKER chartplotters are compact, ruggedly built, highly integrated navigation instruments. They have been designed to be easy to use.
7 TRACKER 5600 Installation and Operation Manual NAVMAN 1-3 Removing and replacing the display unit If the display unit is bracket mounted then the display unit can easily be removed and replaced for security or protection. Removing the display unit: 1 T urn the TRACKER off by holding until the display turns off.
8 TRACKER 5600 Installation and Operation Manual NAVMAN 2 Basic operation Overview of the keys ESC Go back to an earlier menu or display . Any changes are ignored. DISP Show a menu of the main TRACKER displays. T o go to a display , select it from the menu (see section 2-2).
9 TRACKER 5600 Installation and Operation Manual NAVMAN 2-1 T urning on and off / auto power Auto power If the TRACKER is wired for auto power (see section 15-3), then the TRACKER automatically turns on and off with the boat power , and can not be turned on or off manually .
10 TRACKER 5600 Installation and Operation Manual NAVMAN 2-6 Simulate mode Simulate mode allows a user to become familiar with the TRACKER of f the water. In Simulate mode, the data from the GPS receiver and other sensors is ignored and the TRACKER generates this dat a internally to simulate the movement of the boat.
11 TRACKER 5600 Installation and Operation Manual NAVMAN 2-7 Navigating The TRACKER has two ways of navigating, going straight to a point or following a route. Enter waypoints at points of interest before starting to navigate (see section 9-2-1). Ti p : Create a waypoint at the start of the trip to navigate back to.
12 TRACKER 5600 Installation and Operation Manual NAVMAN 3 Chart 3-1-1 Chart modes The Chart has two modes, centre on boat mode and cursor mode. These are explained below . Centre on boat mode T o switch to centre on boat mode in the chart display, press ESC .
13 TRACKER 5600 Installation and Operation Manual NAVMAN 3-1-2 Latitude and longitude Latitude and longitude can be displayed at the top of the chart. Normally the position is the boat’s position, a.
14 TRACKER 5600 Installation and Operation Manual NAVMAN 3-2 Dist ance and bearing calculator The distance and bearing calculator can plot a course of one or several legs and to show the bearing and length of each leg, as well as the total distance along the course.
15 TRACKER 5600 Installation and Operation Manual NAVMAN If Projected course is turned on, then the TRACKER will display the projected position based on the course over ground (COG), speed and a specified time. T o turn Projected course on and off and to set the time, see section 13-2.
16 TRACKER 5600 Installation and Operation Manual NAVMAN T o use the fuel display , the optional fuel kit must be installed and the fuel dat a set up (see section 13-4). T o go to the fuel display , press DISP and select Fuel . The fuel display shows: Used : The total fuel used since it was reset to 0 by the Clear Used command (see section 13-4).
17 TRACKER 5600 Installation and Operation Manual NAVMAN 6 Highway display The highway display has a bird’s eye view of the boat’s course to a destination: T o go to the highway display , press DISP and select Highway . W arning: The highway display does not show land, dangerous waters or chart symbols.
18 TRACKER 5600 Installation and Operation Manual NAVMAN Differential beacon DGPS Differential beacons are land based radio transmitters that broadcast correction signals that can be received by a special receiver on the boat. Differential beacons are usually only installed near ports and import ant waterways, and each beacon has a limited range.
19 TRACKER 5600 Installation and Operation Manual NAVMAN 8 Tides display The tides display shows tide information at a tide station for the selected date. T o go to the tides display for the tide station nearest to the boat, press DISP and select Tides .
20 TRACKER 5600 Installation and Operation Manual NAVMAN T o go to the waypoints display , press DISP and select Waypoints (see right). The waypoints display is a list of the waypoints that have been entered, each with waypoint symbol, name, latitude and longitude, distance and bearing from the boat, type and display option.
21 TRACKER 5600 Installation and Operation Manual NAVMAN Creating and editing a new waypoint from the chart display 1 T o create a waypoint at the boat position, press ESC to switch the chart to centre on boat mode (or press , see above). Or , to create a waypoint at a different point, move the cursor to that point on the chart.
22 TRACKER 5600 Installation and Operation Manual NAVMAN Warning: A fter creating or changing a route, display the route on the chart and check that it does not cross land or dangerous water .
23 TRACKER 5600 Installation and Operation Manual NAVMAN B. Creating a new route from the routes display 1 In the routes display , press MENU and select Create . 2 A new route, with a default name and no waypoints, is displayed. 3 T o change the route name: i Select the route name at the top of the display and press ENT .
24 TRACKER 5600 Installation and Operation Manual NAVMAN 1 1 User card display A C-MAP™ user card is an optional plug-in card that can store data files (see section 1-2). There are three types of files: waypoints, routes or a track. T o go to the user card display , press DISP and select User card .
25 TRACKER 5600 Installation and Operation Manual NAVMAN 12 About display T o go to the about display , press DISP and select About . The about display shows: The software version and date. The world chart version. Any card fitted. The number of waypoints, routes and tracks in the TRACKER.
26 TRACKER 5600 Installation and Operation Manual NAVMAN System Language (English) Rotation (North up) Colours (Normal) Projected course (Off) Keybeep (On) CDI scale (0.1 nm) Factory reset Chart Plotter mode (Off) Map datum (WGS84) Map shift (None) W aypoints (Selected) Lat.
27 TRACKER 5600 Installation and Operation Manual NAVMAN 13-2 Chart setup Rotation The options for chart rotation are: North up : North is always at the top of the chart display . Track up : The chart is rot ated so that the boat direction is to the top of the display .
28 TRACKER 5600 Installation and Operation Manual NAVMAN 13-3 GPS setup GPS Source Disable or enable the TRACKER’ s internal GPS receiver . Disable this if a non-standard GPS antenna that sends NMEA data is installed. DGPS Source Enables or disables the satellite based DGPS correction (see section 7).
29 TRACKER 5600 Installation and Operation Manual NAVMAN 13-5 T rack setup T racking records and displays the boat’s course on the chart (see section 3-5). Record Of f : The TRACKER stops recording a track. 1 to 5 (select a track number): The TRACKER starts recording the boat’ s course into the selected track.
30 TRACKER 5600 Installation and Operation Manual NAVMAN 13-8 Unit s setup Distance unit s Options are nm (nautical miles), mi (statute miles) or km (kilometres). Speed units Options are kn (knots), mph (miles per hour) or kph (kilometres per hour). Depth units Options are ft (feet), fm (fathoms) or m (metres).
31 TRACKER 5600 Installation and Operation Manual NAVMAN Simulate mode is a way of becoming familiar with the TRACKER (see section 2-6). W arning: Never have simulate mode on when the TRACKER is navigating on the water . Simulate T urn simulate mode Off or On .
32 TRACKER 5600 Installation and Operation Manual NAVMAN 15 Inst allation 15-1 What comes with the TRACKER St andard configuration TRACKER display unit, with a holder for plug- in cards and blanking cap for fuel connector . Dust cover for display unit.
33 TRACKER 5600 Installation and Operation Manual NAVMAN 15-3 Inst allation W arning: Ensure that any cut holes will not weaken the boat. If in doubt, consult a qualified boat builder or marine engineer .
34 TRACKER 5600 Installation and Operation Manual NAVMAN Power/data cable for display unit Wire the cable as shown on the next page. Note : The unit requires 12 V DC power . This power supply must be protected with a fuse or circuit breaker of between 2 and 3 A.
35 TRACKER 5600 Installation and Operation Manual NAVMAN External GPS antenna Fuel transducer(s) (optional) Inst allation T o engine From fuel tank Auto Power Wiring Black wire: Connect this to the negative battery terminal. Red Wire: Connect this to the 12 V positive battery terminal after the main switch.
36 TRACKER 5600 Installation and Operation Manual NAVMAN Physical Size 179.5 mm H x 195 mm W x 54 mm D (7.06" x 7.6" x 2.1"). Weight, display unit 20 oz (600 g). Display: 6.4" diagonal, TFT colour, 234 x 320 pixels. Electrical Power supply 1 1 to 18 V DC; current at 13.
37 TRACKER 5600 Installation and Operation Manual NAVMAN ADINDAN AFGOOYE AIN EL ABD 70 AM.SAMOA 1962 ANNA 1 AS. 65 ANTIGUA AS. 43 ARC 1950 ARC 1960 AS.BEACON 'E' AS.DOS 71/4 AS.ST A TION 52 AS.TERN ISL. ASCENS.ISL.58 AUS.GEOD. 66 AUS.GEOD. 84 A Y ABELLE BELLEVUE (IGN) BERMUDA 1967 BISSAU BOGOT A OBS.
38 TRACKER 5600 Installation and Operation Manual NAVMAN Appendix B - T roubleshooting This troubleshooting guide assumes that you have read and understood this manual. It is possible in many cases to solve difficulties without having to send the unit back to the manufacturer for repair .
39 TRACKER 5600 Installation and Operation Manual NAVMAN c T ank Full or Set Remaining has not been set every refuelling. d When refuelling, air pockets may have prevented the tank filling completely . e Fuel transducers wear out over time and should be replaced every 5000 litres (1316 US gallons) of fuel as a guide.
40 TRACKER 5600 Installation and Operation Manual NAVMAN Navigation data The boat is sailing from the start to the destination and has moved off the plotted course from the start to the destination. BRG Bearing to Destination Bearing to the destination from the boat.
119 TRACKER 5600 Installation and Operation Manual NAVMAN Appendix D - How to cont act us NORTH AMERICA NAVMAN USA INC. 18 Pine St. Ext. Nashua, NH 03060. Ph: +1 603 577 9600 e-mail: sales@navmanusa.com OCEANIA New Zealand Absolute Marine Ltd. Unit B, 138 Harris Road, East Tamaki, Auckland.
80 NAVMAN MUL TI 3100 Installation and Operation Manual Lon 174° 44.535`E Lat 36° 48.404`S Made in New Zealand MN00019 2 C NA VMAN TRACKER 5600.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Navman TRACKER 5600 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Navman TRACKER 5600 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Navman TRACKER 5600 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Navman TRACKER 5600 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Navman TRACKER 5600, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Navman TRACKER 5600.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Navman TRACKER 5600. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Navman TRACKER 5600 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
