Manuale d’uso / di manutenzione del prodotto Electric Fireplace EF30 del fabbricante Napoleon
Vai alla pagina of 16
1 W415-0675 / A / 03.28.08 W415-0675 / A / 03.28.08 $10.00.
W415-0675 / A / 03.28.08 2 • Do not burn wood or other materials in this fireplace. • Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition. Supervise young children when they are in the same room as the fireplace.
3 W415-0675 / A / 03.28.08 Electrical components and wearable parts such as fan/heater, motors, switches, nylon bearing components and remote controls are covered and NAPOLEON® will provide replacement parts free of charge during the first year of limited warranty.
W415-0675 / A / 03.28.08 4 When using electric appliances, basic precautions should always be followed to reduce the risk of fi re, electric shock, and injury to persons, including the following: 1. Read all instructions before using this fi replace.
5 W415-0675 / A / 03.28.08 This fi replace has been tested in accordance with the CSA Standards for fi xed and location-dedicated electric room fi re- places in the United States and Canada. If you need assistance during installation, please contact your local dealer .
W415-0675 / A / 03.28.08 6 LOCA TING FIREPLACE ! W ARNING Due to high temperatures, this electric fi replace should be located out of traffi c. Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.
7 W415-0675 / A / 03.28.08 ! W ARNING RISK OF FIRE! The power cord must not be pinched against a sharp edge. Secure cord to avoid tripping or snag- ging to reduce the risk of fi re, electric shock or personal injury . Do not run cord under carpeting.
W415-0675 / A / 03.28.08 8 THERMOST A T AND THERMAL SENSOR INST ALLA TION This fi replace has two options for heat control. First is a thermal controlled sensor , which comes plugged into the fi replace beside the main power cord.
9 W415-0675 / A / 03.28.08 HARDWIRE INST ALLA TION HARD WIRING CONNECTION If it is necessary to hard wire this fi replace, a qualifi ed electrician may remove the cord connection, and wire the unit directly to the house hold wiring. This fi replace must be electrically connected and grounded in ac- cordance with local codes, if hard wired.
W415-0675 / A / 03.28.08 10 NOTE: In order to avoid the possibility of exposed insulation or vapour barrier coming in contact with the fi replace body , it is recommended that the walls of the fi replace enclosure be “fi nished” (ie: drywall/sheetrock), as you would fi nish any other outside wall of a home.
11 W415-0675 / A / 03.28.08 OPERA TING BY REMOTE CONTROL 1. Plug in your electric fi replace. 2. Make sure the unit's main Power ON/OFF button is at the ON position! The remote control will NOT work if the main Power button is at the OFF position.
W415-0675 / A / 03.28.08 12 ! W ARNING PREP ARA TION FOR MAINTENANCE Always disconnect the power and allow the electric fi replace to cool before performing any cleaning, maintenance or relocation of this electric fi replace.
13 W415-0675 / A / 03.28.08 EMBER BED BULB REPLACEMENT 1. Remove the 7 screws from the bottom half of the back of fi replace shown in Figure 16 . Remove back plate. 2. Locate the ember bed bulbs which are underneath the fl ame generation cylinder drum.
W415-0675 / A / 03.28.08 14 # P ART NO. DESCRIPTION 1 DQ017-002 LIGHT BULBS 2 RC3 DQ002-006 CIRCUIT BOARDS 3 Q/T FRT01-000-00B HE A TER (HEA TER WITH BLOWER) 4 DQ006-003 SWITCHES 5 R-14 REMOTE CONTROL Contact your dealer for questions concerning prices and availability of replacement parts.
15 W415-0675 / A / 03.28.08 ! W ARNING T urn off the fi replace completely and let cool before servicing. Only a qualifi ed service person should service and repair this electric fi replace. OBSERVED PROBLEM POSSIBLE CAUSE REMEDY Dim or no fl ame 1.
W415-0675 / A / 03.28.08 16 NO TES.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Napoleon Electric Fireplace EF30 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Napoleon Electric Fireplace EF30 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Napoleon Electric Fireplace EF30 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Napoleon Electric Fireplace EF30 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Napoleon Electric Fireplace EF30, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Napoleon Electric Fireplace EF30.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Napoleon Electric Fireplace EF30. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Napoleon Electric Fireplace EF30 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
