Manuale d’uso / di manutenzione del prodotto GEM-P3200 del fabbricante Napco Security Technologies
Vai alla pagina of 68
HARDWIRE WIRELESS GEM-P3200 CONTROL P ANEL/COMMUNICA T OR Programming the GEM-P3200 Control Panel with the "Classic" GEM- RP1CAe2 Keypad and the "K Series" GEM-K1C A Keypad WI818G 10/05 © NAPCO 2005 Quick Start (for "Classic" GEM-RP1CAe2) 1.
THIS MANUA L INCLUDES FEA TURES WHICH ARE O NLY A V A IL ABLE IN CON TROL PA NEL FIRMWARE VE RSION 50 OR LA TER. IMPORT A NT NOTE This manual supports the keyp ad programming of the GEM-P3200 control panel with the NAPCO "classic" GEM- RP1CAe2 keypad as well as the GEM-K1CA "K Series" keyp ad.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 3 W I818G 10/05 IMPOR T A NT NOT E ................................ ...................... 2 CHA NGES FROM PR EVIOUS E DITION ..................... 2 SYSTEM PRO GR A MMING OPTI ONS .
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 4 WI818G 10/0 5 SY STEM PROGRAMMING OPTIONS INTR OD UC TIO N The GEM-P32 00 control panel m ay be prog rammed by vario us mean s, each of w hich will be covered in d etail in the sec tions that follow .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 5 W I818G 10/05 EASY MENU DRIVEN PROGRAM MODE EASY MENU DRIVEN PROGRA M MO DE DEALER PROGRAM - PRELIMINARY INFORM ATION Only Ke ypad #1 m ay be used f or both dealer and us er progra mming, however t his keypa d may be located in any area.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 6 WI818G 10/0 5 GEM-RP 1CAe2/ GEM-K1CA Ke ypad Easy Pr ogram Menu T o create a c ustom prog ram using the GEM-RP1CAe2/GE M-K1CA k eypad, sim ply answer the f ollowi ng question s and re- cord your information on the Easy Menu Programmi ng Workshe et .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 7 W I818G 10/05 GEM-RP1 C A E2/GEM-K1CA KE YPAD EASY PROGRA M MENU Chime 2 Zon e s in Area 1 (New Program Only) • Enter the zone numbers which are to be used as Chime 2 Zones. • Valid entri es are f rom 01 to 4 8.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 8 WI818G 10/0 5 GEM-RP1CA E2 /GEM-K1CA KE YPAD EA SY PROGRAM MENU Enable SIA CP-01 Features? • Press the NEXT/YES button to enable. • Press the PRIOR/NO button to continue. The SIA CP-01 Features are designed to reduce the inci dence of false alarms.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 9 W I818G 10/05 Central Station Recei ver 1 A ccount Number • Enter an account number of up to f our digits. • Press 0 through 9 for digits 0–9, and G 0 for a blank ( • ).
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 10 WI818G 10 /05 Enter User Codes (Press the R button to set cursor.) Enter up to 48 User Codes with User Options, Authority Lev el and Access Control Options (if necessary ) fo r each code.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 11 W I818G 10/05 Press U to save each code. To proceed to the next User Code, set the cursor to the User Number and change it using the number buttons. Program a new User Code as previously described.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 12 WI818G 10 /05 GEM-RP1CA E2 /GEM-K1CA KE YPAD EA SY PROGRAM MENU Enter Proximity Card Users (FOR ACM USE ONLY). (Press the R button to set cursor). See WI1221 for more information.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 13 W I818G 10/05 RF Transmitter Points (Press R to set cursor.) For each transmitter enter: (For wireless systems only. Also se e Quick Method, which follows) • The zone number (01–48) to which the transmitter will be mapped.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 14 WI818G 10 /05 KeyFob Tra nsmitters a s Zone Input De vices (Refer to display above: press the PRIOR button to go back wards). Each of the 4 keyfob buttons c an be assigned to a zone.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 15 W I818G 10/05 DIR ECT A DDRE SS OVER V IEW Direct Address Programming allows you to go directl y to th e address locations (up to 4095) and change the da ta entries manually in orde r to cust omize your control panel options.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 16 WI818G 10 /05 PROGRAM THE DATA ENTRIES 1. Enter the panel's Dealer Security Code, then pres s R . 2. Ans wer NO to all qu estions until “ ACTIV ATE P ROGRA M Y/N ” i s d is played; then press YES.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 17 W I818G 10/05 DIRECT A DDRESS PROGRAM M ODE advance to the data field. 5. Press 015 . The numbers 015 will appear on the k eypad display indicat ing the nu mber of seconds entered.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 18 WI818G 10 /05 DIRECT A DDRE SS PROGR AM MO DE PROGRAM THE DATA ENTRIES 1. Enter the panel 's Deale r Security Cod e, then press R . 2. Ans wer NO to all questio ns until “ ACTI VA TE P RO GRA M Y /N ” is displayed; then pr ess YES.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 19 W I818G 10/05 SYSTEM DELAYS & TIMEOUTS (ADDRESS 0000-0002, 2402, 2406, 2414 & 3902) SYSTEM DELAYS & TIM EOUTS (ADDRESS 2407, 2408 & 4088) SYSTEM DEL A Y S/TIMEOUTS EXIT ADDRESS 0000 DELAY (sec.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 20 WI818G 10 /05 [Default = blank (•) blank (•) f rom address 0490-0492] SYSTEM DELAYS & TIMEOU TS (ADDRESS 24 00, 2401.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 21 W I818G 10/05 ADDRESS 0525 CS Receiver 1 Format ADDRESS 0550 CS Receiver 2 Format Default for C S Receiver 1 Form at depends on Easy M en u Question “R C VR FORMA T ”. [Default = •(blank) E] for CS Receiver s 1, 2 and 3 Formats .
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 22 WI818G 10 /05 CS Receiver 1 Tele phone Number (Digits 1-20) ADDRESS 052 7-0546 (DIGITS 1-20) 0527 0528 0529 0530 0531 0532 0.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 23 W I818G 10/05 CS SUBSCRIBER ID NUMBERS (ADDRESS 0650 -0787) CS SUBSCRIBER ID NUMBERS (TELCO 1 & 2) AREA 1 ADDRESS 0650-06.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 24 WI818G 10 /05 CS REPORTING CODES (ADDRESS 0859- 0883) LEFT ADDR RIGHT blank (•) 0859 blank (•) 0860 blank (•) 0861 bla.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 25 W I818G 10/05 CS SYSTEM REPORTING C ODES: 1. Enter in corr esponding addres s lo c ation (left and right digits ). NOTE: L eft digit is the first digit an d righ t digit is t he second digit in a tw o digit CS receiver format .
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 26 WI818G 10 /05 ADDRESS 09 10-0917 ZONES REPORT CODE (CONTROL PANEL) ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8 0.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 27 W I818G 10/05 CS USER REPORTING C ODES (ADDRESS 10 30-1074) NOTE: These opening events w ill report as the user numbe r shown. Also, Ke yfobs 1-8 (see Eas y Menu Program Driven Mode) w ill report as Users 25-32, respectively.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 28 WI818G 10 /05 GLOBAL SYSTEM EVENT/TROUBLE SYSTEM RESPONSE ACTIVATED BY GLOBAL EVENT/TROUBLE ADDR TEST TIM ER ALARM SUPERV. COMM. BUS 1 MEMORY FAILU RE LOW BATTE RY AC FAIL EZM TAMPER SENSOR WAT CH 1 2 3 4 5 6 7 8 Burglary Alarm Output 1082 Pulsed Burg.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 29 W I818G 10/05 AREA SYSTEM TROUBLE REPORTING OPTIONS AREA SYSTEM TROUBLE R EPORTING OPTIONS (ADDRESS 1120-1 137) 1. Select the desired option entering the option number (1-8) for each digit.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 30 WI818G 10 /05 ZONES 1 8 ZONES 9 16 ZONE OPTIONS ADDR Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z8 ADDR Z9 Z10 Z11 Z12 Z13 Z14 Z15 Z16 1 2.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 31 W I818G 10/05 ZONE OPTIONS / ZONES 17-32 (ADDRESS 1402 -1586) ZONE OPTIONS / ZONES 17-32 ZONES 17 24 ZONES 25 32 ZONE.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 32 WI818G 10 /05 ZONE OPTIONS / ZONES 33-48 (ADDRESS 1602-17 86) ZONE OPTIONS / ZONES 33-48 ZONES 33 40 ZONES 41 48 ZON.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 33 W I818G 10/05 NOTES: (A) 50ms & 20 ms Loop Response only available for zones 1-8. (B) 2-wire Smoke Detectors only av ail able for zones 1-8. Refer to Instal lation Instr uctions (W I817) for more details.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 34 WI818G 10 /05 SYSTEM OPTIONS (ADDRESS 2415-2419) SYSTEM OPTIONS 2417 System Options 2418 Sy stem O ption s Default Option Default Option OFF 1 Openi ng Re port onl y aft er A lar m Rep ort OFF 1 Auto Bell Test on Arming OFF 2 Cl osi ng Re port onl y on Cond .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 35 W I818G 10/05 SYSTEM OPTIONS (ADDRES S 2420-2422, 387 4, 3905, 3880-3881) SYSTEM OPTIONS 3905 Sys tem Option s Default Option.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 36 WI818G 10 /05 [Default = blank (•) blank (•)] LEFT DI GIT ( SUM OF DA TA VALUES) RIGHT DIGIT (SUM OF DATA VALUES) blank .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 37 W I818G 10/05 RIGHT blank (•) 1 2 OPTION Not Used Area 1 Area 2 KEYPAD AREA ASSIGNMENT KEYPAD OPTIONS (ADDRESS 2425-2446) K.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 38 WI818G 10 /05 AC M O P TI O N S ACM ZONE OPTIONS ( ADDRESS 2740-2769) ACM GLOBAL FLAGS (ADDRESS 278 0) ACM TIMEO UTS (ADDRESS 2782-2783) ACM ZONE OP TIONS: Enter the Zone numbers (in decimal 1-48 f ormat) for each option in the table below.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 39 W I818G 10/05 AC M O P T I O NS ACM DOOR AREA OPTION S (ADDRESS 2784-2787) ACM SCHEDULED FREE ACCESS (ADDRESS 4072-4075) ACM Door Number ADDR ACM DOOR AREA OPTIONS Arm All Areas All owed Disarm All Areas All owed Stealth Mode RSR V D.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 40 WI818G 10 /05 AC M O P TI O N S ACM ZONE OPTIONS: Enter the Zone numbers (in two-digit hexadec imal format) for each option in the table below. The left digit (nibbl e) determines the type of device: " ● " for Keypad and "1" for ACM .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 41 W I818G 10/05 SYSTEM OPTIONS (ADDRESS 2423) SYSTEM OPTION: 1. Select the System Option from the table shown and enter in the corresponding address location at right.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 42 WI818G 10 /05 [Default = blank (•) blank (•) f rom address 2471-2502 Default = blank (•) 1 from address 2455-2462 Defa.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 43 W I818G 10/05 EZM GROUP OPTIONS ( ADDRE SS 2555-2576) Default depends on Easy Menu questions: " # OF Z NS IN AREA1 " and " # OF Z NS IN AREA2 " For example, If 32 zones are used, then all 6 groups will be automatically enabled.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 44 WI818G 10 /05 AREA ARMING OPTIONS ( ADDRE SS 2650-2651) PRIORITY AREA ARMING: 1. Select the desired arming area. 2. Ent er the corresponding Area number in each the addr es s location, in Binary (Bit) Format.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 45 W I818G 10/05 AREA OUTPUT CONTROL OP TIONS (ADDRES S 2700-2739) AREA O UTPUT TU RNS O FF UPON DI SA RM: Select options for any of the 5 Outpu t s per area when disarming a particular area.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 46 WI818G 10 /05 RF RECEIVERS & SUPERVISORY TIMER OPTIONS (ADDRESS 3776 & 3760-3775) RF RECE IVERS: Up to 2 RF Re ceivers may be programme d. NOTE: This adds wireless capability to the s ystem, increasing up to 48 the number of zones.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 47 W I818G 10/05 EXTERNAL RELAY CONTROL / RELAYS 1-24 (ADDRESS 3778-380 1 & 2800-2895) ADDRESS 3778 & 2800 -2803 (RELAY/.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 48 WI818G 10 /05 EXTERNAL RELA Y CONTROL EXTERNAL RELAY CONTR OL STEP 2: AR EA OPTIO NS: Each relay/entry can be assign ed to Area 1 or 2 or both areas.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 49 W I818G 10/05 EXTERNAL RELA Y CONTROL EXTERNAL RELAY CONTROL For a desir ed re lay not l ist ed: A.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 50 WI818G 10 /05 EXTERNAL RELA Y CONTROL STEP 4: EVENT I D CODES: Each relay ev ent ca n be a ssign ed any of the availa ble event IDs f rom the tabl e.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 51 W I818G 10/05 EXTERNAL RELA Y CONTROL NUMBER OF RELAY BOARD MODULES (ADDRESS 3777) [Default = blank (•) blan k (•)] LEFT .
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 52 WI818G 10 /05 DIRECT A DDRE SS PROGRAM MODE--USER PROGR AM MODE USER PROGRAM MODE PREL IMIN ARY INFORM ATION The User Program Mode is covered in detail in the operating instructi ons for the keypad in use.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 53 W I818G 10/05 ACCE SS ING US ER PR OG RAM MO DE 1. Press EEEEEE R 2. Press Q Until “ ACTIVA TE PROG RAM Y/N ” appears on LCD screen. 3. Press P To Enter User Program Mode 4.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 54 WI818G 10 /05 ZONE DE SCRIPTIO NS (GEM-RP1C AE2 / GE M-K1CA KE YPADS) Ent er an i dentifying descri ption for each zone. Characte rs are se lected by pressing keypad buttons multipl e times, "Cell Phone" sty le.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 55 W I818G 10/05 KEYP AD CONFIGURA TION MODE This sectio n will focus on configuring the GEM-RP1CAe2/GEM-K1CA Keypads. If there is more than one keypad in the system, only Keypad No.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 56 WI818G 10 /05 Compat ibili ty Nu mber A 4-digit Compatibility Number, if program med, will restrict this key pad to work on a panel programmed with a matching number. 1. Enter a 4-digit number 2.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 57 W I818G 10/05 ALPHABETICAL INDEX ABORT DELAY ADDRESS 2406, 19 ABORT DELAY ZONE OPTION, 30, 31, 32 AC FAIL REPORT DELAY AD DRESS 2408, 19 ACCESS CO NTROL (PANEL) O N AUX.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 58 WI818G 10 /05 ALPHABETICAL INDEX (CONT'D) DIALING—ROTARY O R TOUCH-TONE, 25 DIGITAL D I ALER RPT ENTER/EXIT TEST MODE.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 59 W I818G 10/05 ALPHABETICAL INDEX (CONT'D) 1400HZ HANDSHA KE/KISSOFF AD DR ESS 0576, 21 FUNCTION MODE , 4 GEM-RP1CAE2 /GE.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 60 WI818G 10 /05 ALPHABETICAL INDEX (CONT'D) RPT TROUBLE RESTORE TEL 1 Z ONE OPTION, 30, 31, 32 RPT TROUBLE RESTORE TEL 3 .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 61 W I818G 10/05 ADDRESS NUMBER INDEX ADDRESS 0000 ......... ............. EXIT DELAY ..... .................... ..................... ............................................
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 62 WI818G 10 /05 ADDRESS NUMBER INDEX (CONT'D) ADDRESS 0577-0596 .. .......... CS RECEIVER TELEPHONE NUMBERS .. .................................. ................ .........
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 63 W I818G 10/05 ADDRESS NUMBER INDEX (CONT'D) ADDRESS 2408 ............ .......... AC FAIL REPORT DE LAY ........... .................... ..................... .............
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 64 WI818G 10 /05 ADDRESS NUMBER INDEX (CONT'D) ADDRESS 2421 ...................... VERI-PHONE ZONES PRIO RITY OVER ALARMS .......... ............................... ......35 ADDRESS 2421 .
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 65 W I818G 10/05 ADDRESS NUMBER INDEX (CONT'D) ADDRESS 3874 ............ .......... ENABLE SET TIME/DAT E MESSAGE .......... .................... ................. ..........
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 66 WI818G 10 /05 NOTES.
L NAPCO Security System s X GEM-P3200 Programming Instructions Page 67 W I818G 10/05 NOTES.
X GEM-P3200 Programming Instruction s L NAPCO Securit y Systems Page 68 WI818G 10 /05 GEM-P3200 WIRING DIA GRAM.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Napco Security Technologies GEM-P3200 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Napco Security Technologies GEM-P3200 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Napco Security Technologies GEM-P3200 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Napco Security Technologies GEM-P3200 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Napco Security Technologies GEM-P3200, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Napco Security Technologies GEM-P3200.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Napco Security Technologies GEM-P3200. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Napco Security Technologies GEM-P3200 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
