Manuale d’uso / di manutenzione del prodotto PRM-400 del fabbricante Nady Systems
Vai alla pagina of 15
PRM-400 6 Channel Powered Mixer with Internal DSP Effects OWNER’S MANUAL.
2 PRM-400 6-CHANNEL POWERED MIXER WITH INTERNAL DSP EFFECTS Congratulations on your choice of powered mixers — you have purchased one of the finest compact mixing consoles on the market today . This unit was developed using the expertise of professional sound engineers and working musi- cians.
W ARNING 3 IMPORT ANT SAFETY INSTRUCTIONS When using this electronic device, basic precautions should always be taken, including the following: 1. Read all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.
FEA TURES 4 The PRM-400 is compact desk console or rackmountable 200W/channel stereo powered mixer with 16 built-in selec- table preset DSP echo and reverb effects and a comprehensive mixer section with extensive routing capability .
5 INST ALLA TION T o ensure years of enjoyment from your NADY AUDIO PRM-400 powered mixer console, please read this manual thoroughly before using the unit. 1. INSPECTION Y our NADY AUDIO PRM-400 was carefully packed at the factory in packaging designed to protect the units in shipment.
CONTROLS AND CONNECTIONS 6 1. CHANNEL INPUT SECTION (1) MIC INPUT The Mic input is an elec- tronically balanced XLR type designed to accept signals from any bal- anced low impedance (Low Z) microphone.
CONTROLS AND CONNECTIONS (5) P AD This control attenuates the input signal -20dB when set to the IN (button depressed) position. (6) EQUALIZER CON- TROLS All input channels are fit- ted with a three-band EQ. All three bands have up to 15 dB of cut and boost, with a center detent for “ off ” .
CONTROLS AND CONNECTIONS 8 2. MASTER SECTION a. AUX Send/Return Function and Operation (13) AUX RETURN (31) AUX RETURN CONTROL The Aux Return jack enables a convenient input to the left and right Master Mix busses.
CONTROLS AND CONNECTIONS 9 The PRM-400 is equipped with a 7- band Stereo Graphic Equalizer (22) , allowing final tonal adjustments on the Master Mix. This master EQ is post- Stereo Master faders (27A,27B) so you must exercise care in the proper use of these EQs for best overall sound [see also INPUT SECTION, (6) EQ above].
CONTROLS AND CONNECTIONS 10 by the Channel faders, and the Right speaker output is the signal controlled by the Channel AUX controls (7) . Therefore the Main speakers, for example, can be controlled b.
BACK P ANEL CONTROLS AND CONNECTIONS 11 and is pre the master AUX send control (30) . When the AUX/MON switch (26) button is depressed, this output serves as the monitor output for the Right bus (see also Master Mix Function and Operation ).
CONNECTIONS This NADY AUDIO powered mixer uses 4 different types of audio connectors for the various input/output connections: (1) XLR balanced; (2) 1/4” TRS phone jacks for balanced, unbalanced, stereo, or in/out inserts; (3) 1/4” TS unbalanced; (4) RCA pin unbalanced 1 2 3 2 1 3 Figures 1.
SPECIFICA TIONS 13 The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice. 1. POWER OUTPUTS (R.
BLOCK DIAGRAM 14.
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET , EMERYVILLE, CA 94608 T el: 510.652.2411 • Fax: 510.652.5075 • www .nadywireless.com SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via tele- phone at (510) 652-241 1, or e-mail at service@nadywireless.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Nady Systems PRM-400 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Nady Systems PRM-400 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Nady Systems PRM-400 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Nady Systems PRM-400 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Nady Systems PRM-400, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Nady Systems PRM-400.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Nady Systems PRM-400. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Nady Systems PRM-400 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
