Manuale d’uso / di manutenzione del prodotto 900 del fabbricante N-Tron
Vai alla pagina of 18
900 Series Industrial E thernet Switch Installa tion & User ’s Guide.
4/26/2007 2 Industrial Ethernet Switch In stallation Guid e 900B/900N (3 Slot Enclosur e and Backplane) 900B-FP (Filler Panel fo r empty slo ts) 908TX (Module) 902FX-SC (Module) 902FX-ST (Module) 902F.
4/26/2007 3 Copyright, © N-TRON Corp., 2 006 N-TRON Corp. 820 S. University Blvd., Suit e 4E Mobile, AL 36609 All r ights r eserved. Reproduction, adaptation, or translation without prior wri tten permission from N-TR ON Corp. is prohibited, exc ept as allowed under copyright laws.
4/26/2007 4 Safety Warnings ELECTRICAL SAFETY WARNING: Disconn ect the power cable before removing the en closure top. WARNING: Do not opera te the unit with the top cover removed. WARNING: Do not wor k on equipment or cables du ring periods of lightnin g activity.
4/26/2007 5 900 Series Hazardous Locat ion Installation Requirem ents 1. WARNING: EXPLOSION H AZARD. DO NOT DISCONNE CT UNIT WHILE CIRCUIT I S LIVE, UNLESS KNOWN TO BE NO N-HAZARDOUS. 2. AVERTISEMENT : RISQUE D’EXPLOSION. NEP AS DE’BRANCHER TANT QUE LE CIRCUIT EST SOUS TENSION, A’M OINS QU’IL S’ A GISSE D’U N EMPLACEMENT NON D ANGEREUX.
4/26/2007 6 900 Series Industrial Ethernet Switches The 900 Series Modular Industrial Ethernet Swi tches suppor t high speed l ayer 2 switching between por ts. The 900B a nd 900N enc losures contain a three slot backplane that supports up to three modules.
4/26/2007 7 PACKAGE CONTENTS Please make sure the Ethernet Switch package contains the following items: 1. 900 Series Ethernet Swi tch 2. Installed Modules 3.
4/26/2007 8 902FX/FXE & 904FX /FXE H ALF DUPLEX SETUP All 900 series fiber modules are fact ory configure d for full dup lex opera tion. The se tting is controlled by jumper JP1 on the backpla ne. Note: Most 100Mbit fiber systems will be compatible with this Full Duplex setting.
4/26/2007 9 DIN-Rail Mounting Install the unit in a standard DIN- Rail. Recess the unit to allow at least 5” of horizonta l clearance for fiber optic cable bend radius (2” for TX models) . Note: This unit may be mounte d hor izontally o r vertically.
4/26/2007 10 MODULE CONFIGURATION SETTINGS In order for the 900 Series modules to communicate properly the chassis must be populated with modules from the top slot down as sho wn below. In add ition, JP1 and JP2 jumper s (located on top side of all modules) must b e configured as indicated belo w.
4/26/2007 11 908TX Module From Left to Right: RJ45 Ports Ports 1-8 Auto sensi ng 10/100BaseT Ports Upper Left LED Por t Link Status Upper Right LED Port Activity Status Green LED lights whe n Power is connected Note: At power cycle , all LED’s flash on for approxi mately two seconds, and the n return to proper state.
4/26/2007 12 902/904 FX & FXE Module From Left to Right: TX Fiber Optic Transmit Port RX Fiber Optic Receive Port LNK Link LED (top LED) for Fiber Optic Port ACT Activity LED (bottom LED) for Fibe.
4/26/2007 13 APPLYING POWER 1. Unscrew the flange & Re move the DC Voltage Input Pl ug(s) from the side headers. 2. Install the DC Power Ca bles into the Plug(s) (observing polarity). 3. Tightening torque for the t erminal block power plug i s 0.22 Nm/0.
4/26/2007 14 N-TRON SWITCH GRO UNDING TECHNIQ UES The grounding philosophy of any control sys tem is an integral part of t he design. N-Tron switches are designed to be gro unded, but the us er has been given the fle xibility to floa t the switch when required.
4/26/2007 15 CONNECTING THE UNIT For 902 & 904 FX & FXE units, remove the dust cap from the fiber optic connectors and connect the fiber optic cables. The TX por t on the 902 and/or 904 u nits should be connected t o the RX port o f the far end station.
4/26/2007 16 Key Specifications Physical Height: 3.2" (8.13 cm) Width: 7.1" (18.03 cm) Depth: 4.1" (10.41 cm) Weight: ~3.0 lbs (2.3 kg) (Note: This unit may be mounted h orizontally or vertically) Electrical Input Voltage: 10-30 VDC (Regulated) Input Current: 390 mA @ 24VDC (Steady St ate) Inrush Current: 13.
4/26/2007 17 Regulatory Approvals: Safety: UL 1604 (US and Cana da) Hazardous Locati ons, Class I, Zone 2, Group IIC, T4A EMI: EN50081-1:19 92, EN55022 – Class A FCC Part 15 Class A EMS: EN55024:199.
4/26/2007 18 N-TRON Limited Warrant y N-TRON, C orp. wa rrants t o the end user that this hardware product wi ll be free from defects in workmanship and mat erials, un der normal use and service, fo r the applicable warranty period from the date of purchase from N-TRON or its a uthorized reseller.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il N-Tron 900 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del N-Tron 900 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso N-Tron 900 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul N-Tron 900 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il N-Tron 900, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del N-Tron 900.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il N-Tron 900. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo N-Tron 900 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
