Manuale d’uso / di manutenzione del prodotto G52-M7031X1 del fabbricante MSi
Vai alla pagina of 75
i RS350M G52-M7031X1 MS-7031 (v1.X) M-A TX Mainboard.
ii Manual Rev: 1.0 Release Date: September 2004 FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules.
iii Copyright Notice The material in this document is the intellectual property of MICRO-ST AR INTERNA TIONAL . We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice.
iv 1. Always read the safety instructions carefully. 2. Keep this User’s Manual for future reference. 3. Keep this equipment away from humidity. 4. Lay this equipment on a reliable flat surface before setting it up. 5. The openings on the enclosure are for air convection hence protects the equip- ment from overheating.
v CONTENTS FCC-B Radio Frequency Interference Statement ........................................................ i i Copyright Notice ........................................................................................................... i i i Revision History .
vi Fan Power Connectors: CPUF AN1/SYSFAN1 .......................................... 2-14 Hard Disk Connectors: IDE1 & IDE2 ........................................................... 2-15 CD-In Connector: JCD1 ....................................
vii Playing KaraOK .................................................................................................. 4-10 Chapter 5. Introduction to A Ti IXP 300 SA T A RAID .......................................... 5 -1 Introduction ...............
1-1 Getting Started Thank you for purchasing RS350M Series (MS-7031) v1.X Micro A TX mainboard. The RS350M Series is based on AT I ® Radeon 9100 IGP Pro & AT I ® IXP 300 chipsets and provides 8 USB 2.
1-2 MS-7031 Micro A TX Mainboard Mainboard Specifications CPU h Socket 478 for P4 processors (Northwood/Prescott) at 400/533/800 MHz h Supports up to 3.4GHz. h Hyper-Threading CPU. (For the latest information about CPU, please visit http://www.msi.com.
1-3 Getting Started - 1 Line-In/Line-Out/Mic-In port - 1 RJ-45 LAN connector - 1 IEEE 1394 port (Optional) - 1 CD-IN pin header IEEE1394 (Optional) h VIA VT6307 PCI Controller with integrated PHY (optional) h Supports 2 1394 ports (Rear x1 / Front x 1) Audio h AC97 link controller integrated in A TI IXP 300.
1-4 MS-7031 Micro A TX Mainboard Mainboard Layout RS350M Series (MS-7031) v1.X Micro A TX Mainboard D I M M 2 D I M M 4 D I M M 1 D I M M 3 AGP Slot T: m o u s e B: keyboard T: Line-Out B:Mic Line-In .
1-5 Getting Started MSI Special Features Live Update The Live Update 3™ is a tool used to detect and update your BIOS/ drivers/VGA BIOS/VGA Driver/OSD/Utility online so that you don’t need to search for the correct BIOS/driver version throughout the whole W eb site.
1-6 MS-7031 Micro A TX Mainboard Core Center CoreCenter is just like your PC doctor that can detect, view and adjust the PC hardware and system status during real time operation. In the left side it shows the current system status including the Vcore, 3.
1-7 Getting Started Left-wing: Current system status In the left sub-menu, you can configure the settings of FSB, Vcore, Memory V oltage and AGP V oltage by clicking the radio button next to each item.
2-1 Hardware Setup Chapter 2. Hardware Setup This chapter tells you how to install the CPU, memory modules, and expansion cards, as well as how to setup the jumpers on the mainboard. Also, it provides the instructions on connecting the peripheral devices, such as the mouse, keyboard, etc.
2-2 MS-7031 Micro A TX Mainboard B A T T + Quick Components Guide JAUD1 , p.2-17 JTV1 , p.2-20 CPU , p.2-3 Back Panel I/O , p.2-9 CPU_FAN1 , p.2-14 FDD1 , p.2-14 SATA1, SATA2 p.2-18 JCD1 , p.2-16 JFP1 , p.2-17 SYSFAN1 , p.2-14 DDR DIMMs , p.2-6 IDE2 , p.
2-3 Hardware Setup Central Processing Unit: CPU Example of CPU Core Speed Derivation Procedure If CPU Clock = 133MHz Core/Bus ratio = 23 then CPU core speed = Host Clock x Core/Bus ratio = 133MHz x 23 = 3.06 GHz The mainboard supports Intel ® Pentium ® 4/Celeron Northwood/Prescott proc- essor in the 478 pin package.
2-4 MS-7031 Micro A TX Mainboard 1. Please turn off the power and unplug the power cord before installing the CPU. 2. Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-de- gree angle. 3. Look for the cut edge. The cut edge should point towards the lever pivot.
2-5 Hardware Setup 5. Connect the fan power cable from the mounted fan to the 3-pin fan power connector on the board. Installing the CPU Fan As processor technology pushes to faster speeds and higher performance, thermal management becomes increasingly important.
2-6 MS-7031 Micro A TX Mainboard Memory DDR DIMM Slots (DIMM 1~4, from left to right) Channel A: DIMM1 & DIMM2 (green) Channel B: DIMM3 & DIMM4 (purple) The mainboard provides 4 slots for 184-pin, 2.5V DDR DIMM with 8 memory banks. Y ou can install DDR266 / DDR333 / DDR400 SDRAM modules on the DDR DIMM slots (DIMM 1~4).
2-7 Hardware Setup Installing DDR Modules 1. The DDR DIMM has only one notch on the center of module. The module will only fit in the right orientation. 2. Insert the DIMM memory module vertically into the DIMM slot. Then push it in until the golden finger on the memory module is deeply inserted in the socket.
2-8 MS-7031 Micro A TX Mainboard Power Supply The mainboard supports A TX power supply for the power system. Before inserting the power supply connector, always make sure that all components are installed properly to ensure that no damage will be caused.
2-9 Hardware Setup The back panel provides the following connectors: Back Panel Mouse Keyboard U S B Parallel COM 1 VGA (Optional) L-out L-in MIC USB LAN (Optional) (Optional) 1394 Keyboard Connector The mainboard provides a standard PS/2 ® keyboard mini DIN connector for attaching a PS/2 ® keyboard.
2-10 MS-7031 Micro A TX Mainboard RJ-45 LAN Jack: 10/100 LAN (8100C) /Giga-bit LAN (81 10SB) (Optional) The mainboard provides two standard RJ-45 jacks for connection to Local Area Network (LAN). Giga-bit LAN enables data to be transferred at 1000, 100 or 10Mbps.
2-11 Hardware Setup IEEE1394 Port (Optional) The mainboard provides one standard IEEE1394 port. The stand- ard IEEE1394 port connects to IEEE1394 devices without exter- nal power.
2-12 MS-7031 Micro A TX Mainboard USB Connectors The mainboard provides a UHCI (Universal Host Controller Interface) Universal Serial Bus root for attaching USB devices such as keyboard, mouse or other USB- compatible devices. Y ou can plug the USB device directly into the connector.
2-13 Hardware Setup Parallel Port Connector: LPT1 The mainboard provides a 25-pin female centronic connector as LPT . A parallel port is a standard printer port that supports Enhanced Parallel Port (EPP) and Extended Capabilities Parallel Port (ECP) mode.
2-14 MS-7031 Micro A TX Mainboard The mainboard provides connectors to connect to FDD, IDE HDD, case, modem, LAN, USB Ports and CPU/System/Power Supply F AN. Floppy Disk Drive Connector: FDD1 The mainboard provides a standard floppy disk drive connector that supports 360K, 720K, 1.
2-15 Hardware Setup Hard Disk Connectors: IDE1 & IDE2 The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100/133 controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 function. Y ou can connect up to four hard disk drives, CD-ROM, 120MB Floppy (reserved for future BIOS) and other devices.
2-16 MS-7031 Micro A TX Mainboard CD-In Connector: JCD1 The connector is for CD-ROM audio connector. SPDIF-Out Connector: JSPD1 (Optional) This connector is used to connect SPDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission.
2-17 Hardware Setup Front Panel Connector: JFP1 The mainboard provides one front panel connector for electrical connection to the front panel switches and LEDs.
2-18 MS-7031 Micro A TX Mainboard PIN SIGNAL PIN SIGNAL 1 GND 2 TX P 3 TXN 4 GND 5 RXN 6 RX P 7 GND S A T A1 & SA T A2 Pin Definition Connect to serial A T A ports T ake out the dust cover and con.
2-19 Hardware Setup IEEE 1394 Connector: J1394_1 (Optional) The mainboard provides one 1394 pin header that allows you to connect optional IEEE 1394 bracket.
2-20 MS-7031 Micro A TX Mainboard TV-Out Connector: JTV1 (Optional) The mainboard optionally provides a TV-Out connector for you to attach a TV- Out bracket. The TV-Out bracket offers two types of TV-Out connectors: S-V ideo and RCA Composite connector.
2-21 Hardware Setup The motherboard provides the following jumpers for you to set the computer’s function. This section will explain how to change your motherboard’s function through the use of jumpers.
2-22 MS-7031 Micro A TX Mainboard AGP (Accelerated Graphics Port) Slot The AGP slot allows you to insert the AGP graphics card. AGP is an interface specification designed for the throughput demands of 3D graphics. It introduces a 66MHz, 32-bit channel for the graphics controller to directly access main memory.
3-1 BIOS Setup Chapter 3. BIOS Setup This chapter provides information on the BIOS Setup program and allows you to configure the system for optimum use. Y ou may need to run the Setup program when: An error message appears on the screen during system boot up, and requests you to run SETUP.
3-2 MS-7031 Micro A TX Mainboard Entering Setup Power on the computer and the system will start POST (Power On Self T est) process. When the message below appears on the screen, press <DEL> key to enter Setup.
3-3 BIOS Setup The Main Menu Standard CMOS Features Use this menu for basic system configurations, such as time, date etc. Advanced BIOS Features Use this menu to setup the items of A W ARD ® special enhanced features. Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system’s performance.
3-4 MS-7031 Micro A TX Mainboard Load Fail-Safe Defaults Use this menu to load the default values set by the BIOS vendor for stable system performance. Load Optimized Defaults Use this menu to load the default values set by the mainboard manufacturer specifi- cally for optimal performance of the mainboard.
3-5 BIOS Setup Standard CMOS Features Date This allows you to set the system to the date that you want (usually the current date). The format is <day><month> <date> <year>. day Day of the week, from Sun to Sat, determined by BIOS.
3-6 MS-7031 Micro A TX Mainboard Drive A: This item allows you to set the type of floppy drives installed. Available options: [None], [360K, 5.25 in.], [1.2M, 5.25 in.], [720K, 3.5 in.], [1.44M, 3.5 in.], [2.88M, 3.5 in.]. Video The setting controls the type of video adapter used for the primary monitor of the system.
3-7 BIOS Setup Advanced BIOS Features BIOS Sector Protection The item is to set the Virus Warning feature for IDE Hard Disk boot sector protection. If the function is enabled and any attempt to write data into this area is made, BIOS will display a warning message on screen and beep.
3-8 MS-7031 Micro A TX Mainboard Full Screen LOGO Show This item enables you to show the company logo on the bootup screen. Settings are: [Enabled] Shows a still image (logo) on the full screen at boot.
3-9 BIOS Setup Advanced Chipset Features DRAM Clock By Selects whether DRAM clock is controlled by the SPD (Serial Presence Detect) EEPROM on the DRAM module. Setting to [By SPD] enables the following fields auto- matically to be determined by BIOS based on the configurations on the SPD.
3-10 MS-7031 Micro A TX Mainboard TRCD When DRAM is refreshed, both rows and columns are addressed separately. This setup item allows you to determine the timing of the transition from RAS (row address strobe) to CAS (column address strobe). The less the clock cycles, the faster the DRAM performance.
3-11 BIOS Setup TV Standard Select the TV standard which is used as the video signal format of your TV if you have connected a TV to the system. Three TV standards are available for the field: [NTSC] NTSC format which is used in United States. [P AL] P AL format.
3-12 MS-7031 Micro A TX Mainboard Integrated Peripherals USB Controller Select [Enabled] if your system contains a Universal Serial Bus (USB) controller and you have USB peripherals. Setting options: [Disabled], [Enabled]. USB 2.0 Controller Set to [Enabled] if you need to use any USB 2.
3-13 BIOS Setup IDE Device Configuration Press <Enter> to enter the sub-menu and the following screen appears: On-Chip IDE Channel0/1 The integrated peripheral controller contains an IDE interface with support for two IDE channels. Choose [Enabled] to activate each channel separately.
3-14 MS-7031 Micro A TX Mainboard SA T A Device Configuration Press <Enter> to enter the sub-menu and the following screen appears: Onboard Serial A T A This item is used to enable/disable the onboard Serial A T A controller . Setting options: [Enabled], [Disabled].
3-15 BIOS Setup Parallel Port Mode SPP : Standard Parallel Port EPP : Enhanced Parallel Port ECP : Extended Capability Port ECP + EPP: Extended Capability Port + Enhanced Parallel Port Normal SPP/EPP/ECP/ECP+EPP T o operate the onboard parallel port as Standard Parallel Port only , choose [SPP].
3-16 MS-7031 Micro A TX Mainboard Power Management Setup ACPI Function This item is to activate the ACPI (Advanced Configuration and Power Management Interface) Function. If your operating system is ACPI-aware, such as Windows 98SE/ 2000/ME/XP, select [Enabled].
3-17 BIOS Setup Wake Up Event Setup Press <Enter> and the following sub-menu appears. Resume by PCI (PME #) This controls how and whether the system can be powered on by the devices installed on PCI slots. Setting options: [Disabled], [Enabled].
3-18 MS-7031 Micro A TX Mainboard VGA Palette Snoop Bit Setting Action [Disabled] Data read or written by the CPU is only directed to the PCI VGA device’s palette registers.
3-19 BIOS Setup Assign IRQ For VGA/USB Set to [Enabled] allows BIOS to assign an IRQ to VGA card/USB device. Choose [Disabled] if you want to release the IRQ. Setting options: [Enabled], [Disabled]. PCI Latency Timer (CLK) This item controls how long each PCI device can hold the bus before another takes over.
3-20 MS-7031 Micro A TX Mainboard PC Health Status This section shows the status of your CPU, fan, overall system status, etc. Monitor function is available only if there is hardware monitoring mechanism onboard. CPU W arning T emperature This item is used to specify a thermal limit for CPU.
3-21 BIOS Setup Use this menu to specify your settings for frequency/voltage control. Frequency/V oltage Control Current CPU FSB Clock/DRAM Clock These two items show the current clocks of CPU/DRAM.
3-22 MS-7031 Micro A TX Mainboard Spectrum if you are overclocking because even a slight jitter can introduce a tempo- rary boost in clock speed which may just cause your overclocked processor to lock up. Options: [Disabled], [Enabled]. Adjust CPU FSB Clock This item specifies the clock frequency of CPU host bus (FSB), AGP (3V66) and PCI bus.
3-23 BIOS Setup Load Fail-Safe/Optimized Defaults The two options on the main menu allow users to restore all of the BIOS settings to the default Fail-Safe or Optimized values. The Optimized Defaults are the default values set by the mainboard manufacturer specifically for optimal performance of the mainboard.
3-24 MS-7031 Micro A TX Mainboard When you select this function, a message as below will appear on the screen: T ype the password, up to eight characters in length, and press <Enter>. The pass- word typed now will replace any previously set password from CMOS memory .
4-1 Introduction to ALC655 Audio Codec The motherboard is equipped with Realtek ALC655 chip, which pro- vides support for 6-channel audio output, including 2 Front, 2 Rear, 1 Center and 1 Subwoofer channel. ALC655 allows the board to attach 4 or 6 speakers for better surround sound effect.
4-2 MS-7031 Micro A TX Mainboard Installing the Audio Driver Y ou need to install the driver for Realtek ALC655 chip to function properly before you can get access to 4-/6-channel audio operations. Follow the procedures described below to install the drivers for different operating systems.
4-3 Introduction to ALC655 Audio Codec 3. Click Next to start installing files into the system. 4. Click Finish to restart the system. Select this option.
4-4 MS-7031 Micro A TX Mainboard Using the Back Panel In addition to a default 2-channel analog audio output function, the audio con- nectors on the Back Panel also provide 4- or 6-channel analog audio output function if a proper setting is made in the software utility.
4-5 Introduction to ALC655 Audio Codec 2 3 5 4 6.
4-6 MS-7031 Micro A TX Mainboard Connecting the Speakers When you have set the Multi-Channel Audio Function mode properly in the software utility, connect your speakers to the correct phone jacks in accordance with the setting in software utility.
4-7 Introduction to ALC655 Audio Codec 1 Line Out (Rear channels) * 2 Line Out (Front channels) 3 Line Out (Center and Subwoofer channel) * * Both Line In and MIC function are converted to Line Out func- tion when 6-Channel Mode for 6-Speaker Output is selected.
4-8 MS-7031 Micro A TX Mainboard T esting the Connected Speakers T o ensure that 4- or 6-channel audio operation works properly , you may need to test each connected speaker to make sure every speaker work properly.
4-9 Introduction to ALC655 Audio Codec 4. While you are testing the speakers in 6-Channel Mode, if the sound coming from the center speaker and subwoofer is swapped, you should select Swap Center/ Subwoofer Output to readjust these two channels .
4-10 MS-7031 Micro A TX Mainboard Playing KaraOK The KaraOK function will automatically remove human voice (lyrics) and leave melody for you to sing the song. Note that this function applies only for 2-channel audio operation. Playing KaraOK 1. Click the audio icon from the window tray at the lower-right corner of the screen.
5-1 Introduction to A Ti IXP300 SA T A RAID Chapter 5. Introduction to A T i IXP 300 SA T A RAID The southbridge IXP300 provides a hybrid solution that combines two independent SA T A ports for support of up to two Serial A T A (Serial A T A RAID) drives.
5-2 MS-7031 Micro A TX Mainboard Introduction RAID - Redundant Array of Independent Disks RAID technology manages multiple disk drives to enhance I/O performance and provide redundancy in order to withstand the failure of any individual member, without loss of data.
5-3 Introduction to A Ti IXP300 SA T A RAID BIOS Configuration The A T i RAID should be integrated with the system BIOS on all motherboards with a supported A Ti chipset.
5-4 MS-7031 Micro A TX Mainboard (2) Delete RAID Sets 1. Select the Delete RAID Set in the main menu, and select the desire set and press <Enter>. 2. Press Y when asked “Are Y ou Sure?” 3. The drive will be returned to the original status which the RAID Set can be created.
5-5 Introduction to A Ti IXP300 SA T A RAID Install Driver in Windows XP / 2000 h New Windows XP / 2000 Installation The following details the installation of the drivers while installing Windows XP / 2000. 1. Start the installation: Boot from the CD-ROM.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il MSi G52-M7031X1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del MSi G52-M7031X1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso MSi G52-M7031X1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul MSi G52-M7031X1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il MSi G52-M7031X1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del MSi G52-M7031X1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il MSi G52-M7031X1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo MSi G52-M7031X1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
