Manuale d’uso / di manutenzione del prodotto UPORT 1100 del fabbricante Moxa Technologies
Vai alla pagina of 45
UPort 1 100 Series User ’ s Manual Fourth Edition, April 2009 www .moxa.com/product © 2009 Moxa Inc. All righ ts reserved. Reproducti o n wi t ho ut perm ission is prohi bi t e d.
UPort 1100 Series User’s Manual The software d escribed in this m anual is furnished under a license agreem ent and may be use d only in accordance with the term s of that agreement. Copyright Notice Copyright © 2009 Moxa Inc. All rights reserved. Reproducti o n wi t ho ut perm ission is prohi bi t e d.
Table of Contents Chapter 1 Introduction .............................................................................................. 1-1 Overview ......................................................................................................
1 1 Chapter 1 Introduction The UPort 1100 Series of USB-to- s er ial converters provide an easy way to add CO M ports to your computer. The U Port 1110 prov ides one RS-232 po rt, the UPort 113 0 provides on e RS-422/RS-485 port, and the UPort 1150 and UPor t 1150I each prov ide one RS-232/4 22/485 port.
UPort 1100 Series User’ s Manual Introduction Overview The UPort 1110, UPort 1130, and UPort 1150/11 50I are part of Moxa’s UPort line of USB-to-serial converters. The UP ort line provi des a range of easy -to-use solutions for adding COM ports through a PC’s USB port.
UPort 1100 Series User’ s Manual Introduction Product Features The UPort converter has the follo wing features: y Full-Speed USB operation at up to 12 Mbps y Additional I/ O or IRQ not required y Serial transm ission speed up to 921.
UPort 1100 Series User’ s Manual Introduction Material UPort 1110/1130 /1150: ABS + PC UPort 1150I: Metal Gross Weight UPort 1110/113 0/1150: 60 g (0.
UPort 1100 Series User’ s Manual Introduction LED Indicators Active RxD TxD 1110 USB-to-Serial Adaptor Active RxD TxD 1130 USB-to-Serial Adaptor Active RxD TxD 1150 USB-to-Serial Adaptor RS-232/422/.
UPort 1100 Series User’ s Manual Introduction TR 150 KX 1K 2 1 ON DIP 3 Adjustable Pull High/low, Terminat or Resistors for the RS-485 Port In some critical environments, you may need to add termination resistors to prevent the reflection of serial signals.
2 2 Chapter 2 Installation and Configuration Installation of the converter is a simple process. Fi rst install the driver, then plug the converter into a USB port. When the converter is plugged in, Windows will load the correct dr ivers for the converter and the new COM port.
UPort 1100 Series User’s Manual Installation and Configuration Initial Driver Installation The Document ation and Software CD contain the drivers for the co nverter. You may also download th e drivers at www.moxa.com . The installation procedure is the same for all Wind ows operating systems.
UPort 1100 Series User’s Manual Installation and Configuration 2. Click Next to install the driver in the indicated folder, or use the drop-down folder list to locate a different folde r.
UPort 1100 Series User’s Manual Installation and Configuration 4. A window will pop up cautioning you that this software has not passed Windows logo testin g. This is a standard warning, and Mox a has thoroughly tested the dr iv er for safe Windows operation.
UPort 1100 Series User’s Manual Installation and Configuration Hardware Installation After installing the driver, plug the conv erter into any upstrea m USB port, such as a USB port on your computer. W indows will automatically detect the converter and b egin installing the driver.
UPort 1100 Series User’s Manual Installation and Configuration 3. Windows will automatically detect and install th e n ew serial port. No further action is required Windows XP, Windows 2003, and Win dows Vista (32-bit and 64-bit) The following in structions are for Windows XP , Windows 2003, and Windows Vista systems.
UPort 1100 Series User’s Manual Installation and Configuration 3. On the next wi ndow that appears, select Install the software automatically (Recomme nded) , then click Next .
UPort 1100 Series User’s Manual Installation and Configuration 5. Windows will spend a few moments installing the UPort driver. 6. The next window indicates that Windows has completed the installation. Click Finish to continue with installation procedure.
UPort 1100 Series User’s Manual Installation and Configuration 8. The Found New Hardware Wizard will open. If you see the following screen, select No, not this time , then click Next . 9. After a moment, the Found New Hardware Wizard will open. Select Inst all the software automatically (Recommende d) , then click Next .
UPort 1100 Series User’s Manual Installation and Configuration 10. The installation wizard will search for the correct drivers. After a moment, a window will pop up cautioning you that this software has not passe d Windows logo testin g. This is a standar d warning, and Moxa has thor ou g hl y test ed t he dri ver for safe Windows operati on.
UPort 1100 Series User’s Manual Installation and Configuration 12. The next window indicates that Windows has completed the installation. Click Finish to proceed with inst all a t i on pr o cedu re. 13. The Found New Hardware balloon will reappear, indicating that the installation was successful.
UPort 1100 Series User’s Manual Installation and Configuration Configuring the COM Port After the driver and hardware have been succe ssfully in stalled, the new COM port will have a COM number and can be accessed and controlled ju st like your PC’s built-in COM ports.
UPort 1100 Series User’s Manual Installation and Configuration Configuring the Converter If you need to change t he COM number that the co nverter assigns to the COM port, or ad just other advanced settings, you may go to Device Manager and right-click the UPort converter, which will be listed u nder Multi-por t serial adaptors .
UPort 1100 Series User’s Manual Installation and Configuration In the Port Configuration tab, you will see the new COM port listed. Click Port Setting to modify the C OM number and ot her parameters.
UPort 1100 Series User’s Manual Installation and Configuration You may chan ge the Port Num ber and enable or disa ble the Fast Flush f unction. For the UPort 1130, you m ay also select between RS- 422, 2-wire RS-485, and 4-wire RS-485 modes.
UPort 1100 Series User’s Manual Installation and Configuration Removing the Converter The converter i s a plug and pl ay device. No special proce dures are requi red to remove the converter; yo u may simply pull the converter o ut of the USB p ort. You shoul d verify that no data is being transmitted before removin g the converter.
UPort 1100 Series User’s Manual Installation and Configuration Uninstalling the Driver The UPort d river may be remove d through Ad d/Remove Pro grams in the Wi ndows Control Panel . Click Remove next to MO XA UPort 1110/1130/1150 Window s Driver Ver1.
UPort 1100 Series User’s Manual Installation and Configuration Install Linux Driver Linux Kernel 2.4.20 and above The Linux driver for the Moxa UPort 1000 Series converters will map Linux host ttyUSBxx po rts to UPort devic e ports.
UPort 1100 Series User’s Manual Installation and Configuration Unloading the Moxa Driver The driver will not be unloaded when you remove the MOXA UPort 1100 from the PC.
UPort 1100 Series User’s Manual Installation and Configuration In this section, we provid e four proce dures to introduce the Moxa Linux Driver. 1. Installing Linux Driver File 2. Loading/Unload ing the Moxa Driver 3. Setting the Serial Parameters 4.
UPort 1100 Series User’s Manual Installation and Configuration Setting the Serial Parameters The UPort 1 130 supports thre e interfaces (RS-48 5 2W, RS-485 4 W, RS-422) an d the UPort 1150/1150I supports four interfaces (RS-232, R S-4 85 2W, RS-485 4W, RS-422).
UPort 1100 Series User’s Manual Installation and Configuration Installation with an installation package for Win CE 6.0 Installation procedure Copy the UP ort 1200/140 0/1600 WinCE 6.
UPort 1100 Series User’s Manual Installation and Configuration Step 2: The WinCE 6.0 OS Design Wizard will start, click “ Next ” to continu e . In the “Board Support Packa ges” page, select the “CEPC: x86.
UPort 1100 Series User’s Manual Installation and Configuration Step 3: Under Design Templates and Design Template Variants, select your environment, such as PDA Device or Mobile Handheld, and th en click Next . I n Application & Me dia and Networking & Communication, als o select your enviro nment, such as .
UPort 1100 Series User’s Manual Installation and Configuration 2-25.
UPort 1100 Series User’s Manual Installation and Configuration Step 4: When the OS Design Projec t Wizard Complete screen appears, click Finish . The notification will pop up.
UPort 1100 Series User’s Manual Installation and Configuration Step 5: Open the project you c reated. Click Project on top of the screen, and the n select Add Existing Subproject . Switch the folder to “C:MOXAUPORTwin ce600 Uport” and add subprojects into your OS Design .
UPort 1100 Series User’s Manual Installation and Configuration Step 6: After the subproject is adde d, you may configure the “mxup ce6.reg” registry file with the location [HKEY_LOCAL_MACHINEDriv ersUSBClientDriv ersMXU_PO RT]. Step 7: Open “ B uild ”, select “ Advanced Build Commands ” and “ Build Sysgen ”.
UPort 1100 Series User’s Manual Installation and Configuration Step 8: After building sysgen, select “Build” and “Make Run-Time Image” to create the WinCE OS image.
UPort 1100 Series User’s Manual Installation and Configuration Installation with an installation package for Win CE 5.0 In this section, we show how t o install the Moxa WinCE 5.0 dri ver on a Windows C E 5.0 operating syst em directly . Step 1: Obtain a copy of th e UPo rt 1110/1130/1150 W in CE 5.
UPort 1100 Series User’s Manual Installation and Configuration 2-31.
UPort 1100 Series User’s Manual Installation and Configuration Removing the Moxa WinCE 5.0 / CE 6.0 Driver For WinCE 6.0 Driver: Step 1: Select driver to Remove . Step 2: Switch the folder to C: MOXAUP1100 and double click “ unins000.exe ” to remove installation folder.
UPort 1100 Series User’s Manual Installation and Configuration For WinCE 5.0 Driver: Step 1: In the “OSDesign_View”, delete “USB to Serial Adaptors (Prefi x XXX)”. Step 2: Remove driver from control panel . Step 3: Check “clean before building” Step 4: Use “build and sysgen” to rebuild th e image.
UPort 1100 Series User’s Manual Installation and Configuration 2-34.
UPort 1100 Series User’s Manual Installation and Configuration Step 3: Click on the “Explore” bu tton in the ActiveSync window, and then co p y the UP1100_C OM_v1.0_Setup.C AB (For WinC E 6.0) or UP11 00_COM_v1.1_Set up.CAB (For WinCE 5.0) file to the Mobile/Target Dev ice.
3 3 Chapter 3 Pin Assignment UPort DB9 Pin Assignments The UPort 1100 series uses male DB9 connectors . Pin assign ments are shown in the following diagram: DB9 (male) Pin RS-232 RS-422 4- wire RS-485.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Moxa Technologies UPORT 1100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Moxa Technologies UPORT 1100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Moxa Technologies UPORT 1100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Moxa Technologies UPORT 1100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Moxa Technologies UPORT 1100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Moxa Technologies UPORT 1100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Moxa Technologies UPORT 1100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Moxa Technologies UPORT 1100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
