Manuale d’uso / di manutenzione del prodotto IA260-LX del fabbricante Moxa
Vai alla pagina of 24
IA260 Hardware User ’ s Manual Third Edition, April 2009 www .moxa.com/product © 2009 Moxa Inc. All righ ts reserved. Reproducti on without permi ssion is prohibited.
IA260 Hardware User’s Manual Any softwa re described in this manual is furnished under a license agreem ent and may be used only in accordance with the term s of that agreement. Copyright Notice Copyright © 2009 Moxa Inc. All rights reserved. Reproducti on without permi ssion is prohibited.
Table of Contents Chapter 1 Introduction .................................................................................................. 1-1 Overview ..................................................................................................
1 1 Chapter 1 Introduction Thank you for purcha sing the Moxa IA260 RISC-based industrial ready-to- run embedded computer. T his computer features 4 R S-232/422/485 serial ports, dual 10/ 100 Mbps Eth.
IA260 Hardware User’s Manual Overview Overview The IA260 embedded co mputers feature 4 RS-232/422/48 5 serial ports, dual Ethernet ports, 8 digital inp ut channels, 8 di gital output cha nnels, VGA outp ut, 2 USB hosts an d a CompactFlash socket in a com pact, industrial-strength al uminum rugged casing .
IA260 Hardware User’s Manual Overview Both models are shipped with the following items: y 1 IA 260 Embedded C omputer y Wall-Mounting Kit y DIN-Rail Mounting Kit (attach to the product’s casing) y.
IA260 Hardware User’s Manual Overview Console/Debu gging Port RS-232 (TxD, Rx D, GND), 4-pin h eader outpu t (1 15200, n, 8, 1) Serial Communication Parameters Data Bits 5, 6, 7, 8 Stop Bits 1, 1.
IA260 Hardware User’s Manual Overview Environmental Limits Operating Temperature Standard Mo dels: -10 to 6 0°C (14 to 14 0°F) Wide Temp. Models: -4 0 to 75°C (-40 to 167°F) Operating Humidity 5 to 95% RH Storage Temperature Standa rd Models: -20 to 80°C (- 4 to 176°F) W ide T emp.
IA260 Hardware User’s Manual Overview Hardware Block Diagram Cirrus Logic EP9315 32-bit ARM9 200 MHz 128MB RAM 32MB Flash Power Circuit RTC Watchdog LAN MAC PHY Ethernet x 2 LAN CF Function RS-232/422/485 x 4 LAN Controller PHY VGA USB 2.
2 2 Chapter 2 Hardware Introduction The IA260 embedded computers a re compact and rugged, making them suit able for industrial applications. The LED indicat ors allow users to monitor performance and identify troub le spots quickly, and t he multiple port s can be used to connect a variety of devices.
IA260 Hardware User’s Manual Hardware Introduction Appearance Top View DI x 8 DO x 8 Power Input (12 to 48 VDC) Reset Front View LED Indicators 10/100 Mbps Ethernet x 2 RT 4 CompactFlash Socket Power, Ready, Storage Serial, Tx/Rx LED Indicators VGA Output RS-232/422/485 Serial Port x 4 USB 2.
IA260 Hardware User’s Manual Hardware Introduction Rear View DIN-rail Kit Dimensions 60 1 1.1 GND DI7 DI6 DI5 DI4 DI3 DI2 DI1 DI0 COM DO6 DO0 DO5 DO4 DO3 DO2 DO1 GND DO7 DC 12-48V 132.
IA260 Hardware User’s Manual Hardware Introduction LED Indicators The IA260 has 15 LED ind icators on the fr ont pa nel. Refer to the following table for information about each LED. LED Name Color Meaning Green Power is ON. Power Off No power is being receive d, or power error exists.
IA260 Hardware User’s Manual Hardware Introduction Real Time Clock The IA260’s real time clock is powered by a lithium battery. We strongly recommend that you do not replace the lithium battery without help from a qu alified Moxa support engi neer.
IA260 Hardware User’s Manual Hardware Introduction W all Mounting (optional) For some applications, you will find it conve nient to mount the IA260 on the wall, as depicted in the following illustrations. STEP 1: Attach the wall mount kit to t he IA260’s rear panel with 2 screws.
3 3 Chapter 3 Hardware Connection Description This section de scribes how to con nect the IA260 to a net work and various devices for first tim e testing purp oses.
IA260 Hardware User’s Manual Hardware Connection Description Wiring Requirements In this section, we describe how to connect various devices to the embedded com puter.
IA260 Hardware User’s Manual Hardware Connection Description ATTENTION The power for this product is intended to be supplied by a Listed Power Supp ly Unit that is rated to deliver 12 to 48 VD C at a minimum of 1200 mA for 12 VDC, and 260 mA fo r 48 VDC.
IA260 Hardware User’s Manual Hardware Connection Description Connecting to a Display The IA260 comes with a D-Sub 15-pin female connector to connect a VGA CR T monitor . T o ensure that the monitor image remains clear , be sure to tighten the monitor cable after connecting it to the V481.
IA260 Hardware User’s Manual Hardware Connection Description Connecting to a Serial Device Use properly wired se rial cables to connect the IA 260 to serial devices. The se rial ports of the IA260 use male DB9 co nnectors. The ports can be conf igured by software for RS-232, RS-422, or 2-wire RS- 485.
IA260 Hardware User’s Manual Hardware Connection Description Digital Input Wiring Dry Cont act Wet Cont act Note: If you are usi ng wet contacts, you must connect “COM” to power.
IA260 Hardware User’s Manual Hardware Connection Description 3. Be sure to insert the Com pactFl ash card correctly into the prot ective cover , as shown in the figure below . 4. Inse rt the CompactFlash protec tive cover with the CompactFlash card into the s ocket, as shown in the figure.
IA260 Hardware User’s Manual Hardware Connection Description ATTENTION The IA260 does not suppo rt CompactFlash hot swap and PnP (Plug and Play) fun ction. It is necessary to re move power so urce first before inserting or removi ng the Compact Flash card.
A A Appendix A Regulatory Approval Statements This device complies with part 15 of the FCC Rules. Operation is subject to the followin g two conditions: (1) This device m ay not cause harm ful interference, and (2) this de vice must accept any interference received, including interference that m a y cause undesired operation.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Moxa IA260-LX è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Moxa IA260-LX - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Moxa IA260-LX imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Moxa IA260-LX ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Moxa IA260-LX, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Moxa IA260-LX.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Moxa IA260-LX. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Moxa IA260-LX insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
