Manuale d’uso / di manutenzione del prodotto J3600 del fabbricante Motion
Vai alla pagina of 96
J3600 T ablet PC Model T 008 Use r ’ s G u id e.
© 2013 Motion Computing, Inc. All rights reserved. This document contains information protected by copyright. No part of this document ma y be reproduced in any form without written consent from Motion. The information in this document is pr ovided “ as is ” and is subject to change wit hout notic e.
iii Contents Chapter 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Optional f eatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Mobile broadband with GPS .
Contents iv Using the Fr ont panel button s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Configuring the fron t panel b uttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents v Finding other softwar e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Chapter 3 Caring for your J3600 . . . . . . . . . . . . . . . . . . . . 71 General care . . . . . .
Chapter 1 Getting Started 1 Getting St ar ted 1 The Motion® J3600 T abl et PC is rugged, powerful, and mobile, providing re al-time access to information in the field.
Chapter 1 Getting Started Optional features 2 Optional featur es This section describes th e optional f eatur es avail able when y ou purchase your J360 0.
Chapter 1 Getting Started Overview of the J3 600 3 V iew Anywhere displa y The View Anywhere display option enhances o utdoor viewing a nd bright-light view ing environments.
Chapter 1 Getting Started Overview of the J3 600 4 F r ont view Speakers Listen to music or ot her audio. Microphones Record sounds and use for speech recognition. Ambient light sensor Measures background light and can automatically adjust the display brightness .
Chapter 1 Getting Started Overview of the J3 600 5 Back view Flex D oc k co nn ec to r (cover shown) Connects to the FlexDock when docked. R emove the cover befor e attaching the J3600 to th e dock. Batt ery power indicator lights Shows the amount of r emaining battery power .
Chapter 1 Getting Started Overview of the J3 600 6 Right side view Shoulder strap attach point Attach point for the shoulder str ap. Air vent Dissipates heat from the T ablet PC . Battery status light Indicates charging when the T ablet PC is plugged in or docked.
Chapter 1 Getting Started Overview of the J3 600 7 Left side view Universal lock slot Connect a security cable to prot ect the T ablet PC from theft. Air vent Dissipates heat from the T ablet PC. Audi o i n/ Microphone por t Connect a micropho ne or other audio so urce usin g a 3.
Chapter 1 Getting Started Overview of the J3 600 8 Bottom view Digitizer P en The J3600 suppor ts touch with a digitizer pen as well as with your finger . Y ou may find the pen handy when you want to write a quick em ail or take notes. The pen is par ticularly effective f or precise data entry and navigation.
Chapter 1 Getting Started Where to begin with your J36 00 9 Where to begin with y our J3600 This section includes some steps you can f oll ow to po wer up and get familiar with your J3600 T able t PC. Step 1: P ow er up the T ablet PC 1. Plug the power cord into an outlet.
Chapter 1 Getting Started Where to begin with your J3600 10 Step 2: Connect to a wireless network The J3600 comes w ith built-in Wi-Fi. Y our T ablet PC may also be equip ped with mobile broadband for accessing the Internet and Bluetooth®. T o set up available wireless networks: 1.
Chapter 1 Getting Started Where to begin with your J3600 11 Set up mobile broadband with GPS If you purchased y our J3600 with the option al mobile br oadband mo dule, you can connec t to high-speed cellular networks worldwide.
Chapter 1 Getting Started Where to begin with your J3600 12 Step 3: Get familiar with your J3600 T ablet PC Once you’ ve set up your J3600, take a few mi nutes to get f amiliar with your T ablet PC. • Calibr ate to uch. If you ha ve a J360 0 with a touchs creen display , you should adjust th e touch settings by calibrating the digitizer .
Chapter 1 Getting Started Where to begin with your J3600 13 N OTE : While in Sleep mode , the pow er button flash es green. T o wake up the T ablet PC from Sleep mode: • Press and release the power button . The T ablet PC quickly resumes activit y and your desktop is the same as you left it.
Chapter 1 Getting Started Optional setup tasks 14 Optional setup tasks Cr eate a r eco v er y image Once you have configured your J3600 T ablet PC—including insta lling your applications— cr e at e a s y s te m i ma g e o n an e x t e r na l U S B dr i v e.
Chapter 1 Getting Started For more information 15 Connect the T ablet PC to a display monitor Y ou can connect a display monitor to your J3600 using the VGA por t located on the dock ing station or your T ablet PC.
Chapter 1 Getting Started For more information 16 Y ou’ll find other useful information on our website: • T ablet PC Tips & T ricks • Motion C omput ing S upport • Fr ee online training vi.
Chapter 2 Using your J3600 17 Usin g you r J3 600 2 This chapter pro vides information about per forming the following tasks: • Using the Motion Dashboard on page 19 • Using touch and the digitize.
Chapter 2 Using your J3600 Introducing the J360 0 desktop and applications 18 Introducing the J3600 desktop and applications When you star t up the J360 0 for the first ti me, the desktop may l ook like the following illustration. Motion Computing applicatio ns appear in the task bar and Windows® notification area.
Chapter 2 Using your J3600 Using the Motion Dashboard 19 Changing the location of the taskbar Y ou may find it convenient to place the Windows® task bar on the lef t edge of the display , especially if your T ablet PC has a touchsc reen disp lay . T o plac e the taskbar on the left edge of the screen: 1.
Chapter 2 Using your J3600 Using the Motion Dashboard 20 Motion Dashboard is or ganize d into cat egories, wh ich are list ed on the left of the Dashboard. T ap a cat egory to display its sett ings. In the following illustration, Motion Dashboard is open to Display settings .
Chapter 2 Using your J360 0 Accessing Motion tools from Windows® notification a rea 21 Ac cessing Motion tools fr om W indo ws® notifica tion area F or convenience , you can access common Motion too ls from the Windows® notification area. N OTE : Initially , the Motion icons don ’t appear in th e notification area.
Chapter 2 Using your J3600 Using touch and the digitizer pen 22 T ap the Motion icon to di splay: • Battery Health —Shows the current battery charge level.
Chapter 2 Using your J3600 Using touch and the digitizer pen 23 N OTE : If the T ablet PC doesn ’t respond when you tap wi th y our finger , tr y using more area of your fingertip. Unlike other types of t ouchscre ens, the J36 00 capacitive touc hscreen do esn ’ t respond to other input.
Chapter 2 Using your J3600 Using touch and the digitizer pen 24 Configuring t ouch input mode Y ou can determine how touch input is configur ed by setting the input mode. Y ou can use: • Y our finger only ; no pe n input is detec ted. • The pen only ; no finger input is detected.
Chapter 2 Using your J3600 Using touch and the digitizer pen 25 T o change t ouch settings: 1. Open Motion Das hboar d . 2. T ap Pen & T ablet . 3. T ap Pe n & I n p u t D ev i ce s . 4. T ap the T ouch tab. 5. T o enable T ouch, tap Use y our finger as an input devic e .
Chapter 2 Using your J3600 Using touch and the digitizer pen 26 6. T o adjust the speed and duration of the P ress and ho ld action, under Pen a c t i o n , tap Press and hold then tap Setti ngs . Mov e the slider to make you r adju stme nts. 7. T o enable the func tion button on the pen, tap Use the pen button as a right- click equivalent .
Chapter 2 Using your J3600 Enteri ng text and handwriting recognition 27 Entering tex t and handwriting recognition Y ou can ent er text by either tapping characters on an on -screen ke yboard or writing on a virtual writing pad. When you write on the writ ing pad, your handwriting c onverts to digital ink.
Chapter 2 Using your J3600 Enteri ng text and handwriting recognition 28 Opening and closing the input panel The T ablet PC input panel often opens automati cally when you tap in a text field. Y ou can also tap the tab located on the left side of the screen to expand the input panel.
Chapter 2 Using your J3600 Enteri ng text and handwriting recognition 29 Entering numbers with numbers pad If you find yourself typing a lot of numbers, use the numbers pad. T o open the numbers pad: • T ap the Num key at the bo ttom of the writing pad .
Chapter 2 Using your J3600 Enteri ng text and handwriting recognition 30 Using handwriting r ecognition Handwriting recognition is enabled by default. The more you write, the quicker y our handwriting is recognized because the J3600 has an automatic learning tool that collec ts data about the words you use and how you write them.
Chapter 2 Using your J3600 Us ing the Front panel buttons 31 Using the F ront panel buttons Y ou can use the butt ons on the fron t of the T ablet PC to perform man y functions without having to use the pen. The buttons a re customiz able, so you can modify their functions to sui t th e way you wo rk .
Chapter 2 Using your J3600 Us ing the Front panel buttons 32 Configuring the fr ont panel butt ons As you bec ome more familiar with your T abl et PC, you may wa nt to customize the buttons on the front panel. Y ou can configure the buttons to star t your favorite program, run a comm an d, or ente r a key combination.
Chapter 2 Using your J3600 Using the camera (optional) 3 3 Using the camera (optional) Y our J3600 T ablet PC may be equipped with a built-in 3.0 MP auto-focus camera with an illumination light. The JPEG format camera ha s a maximum resolution of 2048x1 536 pixels, which suppor ts tak ing photos and capturing video.
Chapter 2 Using your J3600 Using Motion QuickNav 34 Using Motion QuickNa v Motion QuickNav is a user inter face applicatio n designed specifically for to uch. Y ou can use Motion QuickNav to: • T ake photos and insert them directly into yo ur documents or email.
Chapter 2 Using your J3600 Using Motion QuickNav 35 The Motion Qu ickNav keyboard appea rs at the bottom of your de sktop. Motion QuickNav keyboard N OTE : As Motion QuickNav star ts up, the screen disp lays “Motion QuickNa v powered b y Dial Keys. ” Dial Keys is the vendor that created Motion QuickNav f or Motion Computing.
Chapter 2 Using your J3600 Using Motion QuickNav 36 Hiding and showing the Motion QuickNav toolbar While Motion QuickNav is runni ng, the Motion QuickNav toolba r appears on the r ight side of the desktop. Y ou can hide the to olbar from view and show it only when you want to use it.
Chapter 2 Using your J3600 Using Motion QuickNav 37 2. T ap the Options icon to set up the scanner . Y o u can choose to: • Set the t ype of barcode the scanner recognizes. F or best per formance, disable the codes you don ’t need . • Use the front- or r ear-facing camera to scan the codes .
Chapter 2 Using your J3600 Using Motion QuickNav 38 When you select the camera tool from th e Motion QuickNav toolbar , the viewfinder appears. Motion QuickNav photo viewfinder The Action menu on the top r ight allows you to choose how Motion QuickN av handles your photos as you take them.
Chapter 2 Using your J3600 Using Motion QuickNav 39 T ake photos and sav e in a f older T o tak e photos using Motion Quic kNav and save them in a folder: 1. Open th e Motion QuickNav toolbar then tap the camera icon to open the viewfinder . 2. Make sure the folder icon is selec ted under the Actio ns menu.
Chapter 2 Using your J3600 Using Motion QuickNav 40 T ake photos and insert in an application Y ou can inser t a photo directly into a n appl ication by choosing the clipboard icon from the Action menu. T ake a photo , close the viewfinder , then th e photo appears where your cursor is located in the application.
Chapter 2 Using your J3600 Using Motion QuickNav 41 Motion QuickNav edit window Motion QuickNav calls this “r eview mode” beca use photos ar e availa ble for ed iting as long as you have the Motion QuickNav viewfinder open. On ce you close the viewfinder , Motion QuickNav send s the photo to the chosen output: c lipboard , email , or f older .
Chapter 2 Using your J3600 Using Motion QuickNav 42 3. T ap the pencil icon to enter annotate mode. Motion QuickNav pencil toolbar 4. T ap the desired pen color or highlighter . Use the eraser if necessar y. T hen tap the pencil icon agai n to retu rn to the ed it toolba r .
Chapter 2 Using your J3600 Using Motion QuickNav 43 Motion QuickNav folder mode T o locate the folders where Motion QuickNav stor es con tent: 1. Open th e Motion QuickNav toolbar then tap the folder icon to switch to f older mode. 2. T ap the folder icon for the tool whose output you want to change.
Chapter 2 Using your J3600 Setting display options 44 Setting display options This sect ion contains information about custom izing your display settings . Y ou can adjust the brightness level, r otate the display , and change the order in which the display rotat es.
Chapter 2 Using your J3600 Setting display options 45 Setting up an ex ternal display Y ou can use your J3600 with an extern al monitor or projector . Display settings When connecting to an e xternal di spla y , you can specify whether t o: • Duplicate (mirror) the displa ys.
Chapter 2 Using your J3600 Setting display options 46 Extended with monit or primary display theme Display resolution Y ou can change the display resolution of the ex ternal monitor or projector if you’ r e using either extende d scheme.
Chapter 2 Using your J3600 Setting display options 47 Resetting touch after adding other monitors After settin g up an exte rnal m onitor , touch mi ght be disabled on your T ablet PC because Windows® 7 assum es th at the exte rnal display is for to uch i nput.
Chapter 2 Using your J360 0 Connecting headphones, exte rnal speakers, or a microphone 48 Connecting headphones, external speakers, or a microphone Y ou can connect h eadphones or ex ternal spea kers with a 3.5mm plug into the headpho nes port located on the left side of the T ablet PC.
Chapter 2 Using your J3600 Using sp eech recognition 49 Set up the microphones F or best results , move to a quiet en vironmen t. T o set up the microphones: 1. In Control Panel, tap the Ease of Acc ess categor y, then tap Speech Recognition . 2. T ap Set up microphone .
Chapter 2 Using your J3600 Using the battery 50 4. Do one of the following: • F or voice commands, say the appropriate command. F or a list of commands, search Windo ws® Help a nd Support for “ speech commands. ” • F or dictation, open the program you want to use and star t speak ing.
Chapter 2 Using your J3600 Using the battery 51 T o check the battery power: 1. Locate the battery status light located on the right side of the T ablet PC. 2. Check the c olor of the batte ry gauge button for the curr ent status : Steady gr een —Battery is fully charged a nd the T ablet PC is running on AC power .
Chapter 2 Using your J3600 Using the battery 52 T o check the battery status from the battery: • Locate the battery gauge button and indicato r lights on the back of the T ablet PC. The indicator lights show the remaining charge . Each light repr esents appro ximately 20% of a full charge.
Chapter 2 Using your J3600 Using the battery 53 Removing and replacing the J3600 battery Y ou can r emove the ba ttery to check the remain ing power or r eplace it with a fully charged battery. T o remo ve the battery: 1. Ensure that the T ablet PC is pl ugge d into A C power or turned off .
Chapter 2 Using your J3600 Using the battery 54 Hot swapping the batter y Changing a batt ery while the T ablet PC is in use and running on batter y power is called “hot swapping. ” Y o u can hot swap a battery only if you have a second char ged battery to replace the battery that is low on power .
Chapter 2 Using your J3600 Using the battery 55 • When running on ba ttery power , place the T ablet PC in Hibernate mo de or Sleep mode if you ’ re going to leave it unattended f or more than a few minut es. F or mor e information on Hibernate mode and Sleep mode, see Changing how the power button func tions on page 56.
Chapter 2 Using your J3600 Using the battery 56 ENERGY ST AR® compliant The default pow er managemen t settings on the J3600 ha ve been sele cted for comp liance with the ENERGY S T AR® program and are recommended for optimal energy savings.
Chapter 2 Using your J360 0 Using the fin gerprint reader 57 T o change wha t happens when the power button is pr essed: 1. Open Motion Das hboar d . 2. T ap Pow er . 3. Under Powe r Sw it c h on b at t e r y , select what y ou want t o happen when the po wer switch is pressed while the T abl et PC is running on batter y .
Chapter 2 Using your J360 0 Using the fin gerprint reader 58 Y ou can also use the fingerpr int reader as a scrollin g device or to move the cur sor on the screen. N OTE : The scroll and cursor navigation functions ar e disa bled while scannin g a fingerprint.
Chapter 2 Using your J360 0 Using the fin gerprint reader 59 T o configure the fingerprin t reader as a cursor naviga tion devic e: 1. Open Motion Das hboar d . 2. T ap Pen & T ablet . 3. T ab the Navigation Settings button. The T ruePrint Sensor P rop erties window opens.
Chapter 2 Using your J360 0 Using the fin gerprint reader 60 Starting the OmniPass applica tion Y ou use the OmniPass application with the finger print reader to create and manage your fingerprints. After enr olling as an Omni Pa ss user , you use OmniP ass to secur e files, applications, and websites by requiring a fingerprint swipe.
Chapter 2 Using your J360 0 Using the fin gerprint reader 61 Crea te an OmniP a ss user account Y ou crea te (enr oll as) a new OmniP ass user to register your fingerprint.
Chapter 2 Using your J360 0 Using the fin gerprint reader 62 Replace your passw ords Once you have enroll ed in OmniPass, you can use your OmniPass cr edentials instead of your password to logon t o your accounts that requir e passwor ds. This is called passwor d replacement .
Chapter 2 Using your J3600 Using the smart card reader (optional) 6 3 After you restart t he computer , y ou should co nfigure the authentication rules for str ong logon security. T o configur e authentication rules: 1. Start Motion O mniP ass ( page 57 ).
Chapter 2 Using your J3600 Using the Express card r eader (optional) 6 4 T o insert the smar t card: 1. Remove the card slot cover . 2. Slide the smart card into th e slot, with the metal contacts of the embedded chip facing the top of the T ablet PC, until the card is firmly se ated in the r eader .
Chapter 2 Using your J3600 Using the SIM card slot 65 Using the SIM car d slot The SIM card slot holds one SIM (Subscriber Identity Module) card. Y ou need to use a SIM card only if you’ re using mo bile broadband on a GS M/UMTS/HSP A ne twork . Contact your ser vice provider f or details.
Chapter 2 Using your J3600 Using Windows® Action Center 66 Using W indow s® A c tion Cent er Windows® A ction Center provides a central location for you to manage the T ablet PC ’ s security settings and learn more about impro ving security.
Chapter 2 Using your J3600 Backing up your system 67 An aler t sounds when you ’ve accessed the BIOS Setup Utility. If you miss the splash screen, restart the T ablet PC and tr y again. T IP : If a keyboard is attached, you can press F2 to open the Setup Utility t hen press the arrow keys to select items and press Enter to select a submenu.
Chapter 2 Using your J3600 Restorin g your system 68 N OTE : W e recommend that you cr eate a system image as soon as you set up your T ablet PC and then periodically thereafter . T o cre ate a sy stem image: 1. Ensure you have a USB flash drive or other ex ternal dr ive on which to store your system image.
Chapter 2 Using your J3600 Restorin g your system 69 Y ou need to press F8 as soon as the tablet star ts up to access the BIOS. If the Windows® logo appear s, you need to tr y again by waiting until t he Windows® logon prompt appears, and restartin g your tablet from the Star t menu.
Chapter 2 Using your J3600 Finding other software 70 F inding other sof t ware F or information about othe r sof tware for your tablet, go to M otion Computing Acc essories and the Motion Computing Store . Y ou will find links to software solutions for purchase as well as free downloads from Motion Computing and its ser vice par tners.
Chapter 3 Caring for your J3600 71 C aring for y our J3600 3 Pr oper care and maintena nce will keep your J3600 T ablet PC work ing and in good condition. F or general information about care of the tablet an d its components and accessories, see the Safet y and Reg ulatory Guid e included with your T ablet PC.
Chapter 3 Caring for your J3600 Caring for the display 72 Caring f or the disp lay F ollo w these suggestions to keep y our displa y clea n: • Clean fingerprints and smudges from the disp lay sur f ace by wiping it with the display cloth provided . • If needed, use a cleanin g solution recommended by M otion Computing to cl ean the display .
Chapter 3 Caring for your J3600 Cleaning the fingerp rint reader 73 N OTE : T o order pens o r new pen tips , go to Motion Computing Ac cessories . Replacing pen tips P en tips eventually wear do wn or get damaged, so the pen includes extra tips and a tool for repla ci ng t he m.
Chapter 3 Caring for your J3600 Caring for the Table t PC battery 74 Caring f or the T ablet PC batter y T o maximize batt er y performance, c ondition the battery o nce a month. T o condition it, run the T ablet PC on battery pow er until the batte ry ’ s charge level drops belo w 20%.
Chapter 4 Troubleshooting and FAQs 75 T roubleshooting and FA Q s 4 Motion Computing T ablet PCs are thor oughly tested for performa nce and quality, but occasional ly issues can still oc cur . If you don ’t find the inf ormation you ’ re looking for in this sect ion, go to Motion C ompu ting S upport .
Chapter 4 Troubleshooting and FAQs Troubleshooting 76 The display goes black while th e tablet PC is still turned on • The T ablet PC might have turned off the display to sav e power . T o restor e the display , touch the scr een with your finger or the digitizer pen.
Chapter 4 Troubleshooting and FAQs Troubleshooting 77 When I disconnect an external monitor , the desktop area is lar ger than the tablet PC display • The T ablet PC may have expanded the desktop beyond the display area of the ta blet PC display when it was conn ecte d to the ex tern al monitor .
Chapter 4 Troubleshooting and FAQs Troubleshooting 78 T ouch or pen issues The tablet PC doesn’ t respond to the pen I’ m using • Use only the J3 600 digitizer pen wi th the T able t PC. The T ablet PC doesn’ t respond to other pens , eve n Motion Compu ting digitiz er pens f or othe r models .
Chapter 4 Troubleshooting and FAQs Troubleshooting 79 F r ont panel butt ons The buttons on the T ablet PC don’ t do what I expect them to do • The button funct ions may have been customized. Y ou can use the T ablet an d Pen Settings windo w to chan ge the bu tto ns t o the desired functions.
Chapter 4 Troubleshooting and FAQs Troubleshooting 80 Wi-F i issues I can’ t connect to a W i-Fi netw ork • Y our J3600 may not have located a Wi-Fi network. From the Star t menu, tap Con t ro l Pan el then Network and Internet . V iew your activ e networks .
Chapter 4 Troubleshooting and FAQs Troubleshooting 81 My Bluetooth device doesn ’t work properly • Some issues arise when using Bl uetooth devices as listed be low . Bluetooth wireless tips Motion Co mputing and its Blue tooth partners ha ve w orked to ensure a positiv e experience with this technology and to ensure Bluetooth interoperability .
Chapter 4 Troubleshooting and FAQs Troubleshooting 82 Mobile broadband with GPS issues I can ’t c onnect to a mobile broadband network • Mobile broadband is only available if yo u pur chased your J360 0 with the optional Mobile Broadband with GPS module.
Chapter 4 Troubleshooting and FAQs Troubleshooting 83 My GPS isn’ t w orking properly • Mobile Broadband with GPS must be enab led from the Motion Dashboard. Open Motion Dashboard , tap W i reless and tap the check box next to Enable M obile Broadband with GPS .
Chapter 4 Troubleshooting and FAQs Troubleshooting 84 Photos are backwar d (display mirr or image) • Set the camera rotation to F lip X. Open the M otion QuickNav toolbar then tap the camera icon , tap Options icon , tap the Camera tab, tap the Camera tab then under Rotation , select Rotate 180 & Flip X .
Chapter 4 Troubleshooting and FAQs Frequently asked questions 85 F requently asked questions How can I make the battery charge last longer? • By default, the power plan f or the J360 0 is a balance b etween optimal performance and a long batter y ch arge.
Chapter 4 Troubleshooting and FAQs Frequently asked questions 86 How sensitive is the scr een to various elemen ts? • As with any computer or ele ctronic dev ice, yo u should protect the ta blet PC from liquids, dirt and sand, oth er contaminants, and extreme heat.
87 Index Numerics 802.11 Wi-Fi 10 A AC power 9 accessories 16, 70 air vent 6, 7 amber light 85 ambient light sensor 4, 44 application inserting photos in 40 audio drivers 83 settings 21 troubleshootin.
Index 88 connecting display monitor 15 docking station 14 external speakers 48 headphones 48 microphone 48 context-sensitive menu 2 5 credit card 23 crop photos 42 Ctrl+Alt+Del 6 , 12, 83 customizing buttons 32 D Dashboard button about 4, 31 configuring 32 desktop Getting Started doc 18 introduction 18 QuickNav 18 Dial Keys 35, 83 DialKeys.
Index 89 GPS receiver 2, 11 troubleshooting 82 H handwriting recognition 30 hard drive activity 22 hardware ov erview 4 headphones port 7 headphones, connecting 48 hibernate 13, 75 about 56 Home key 29 hot swapping battery 54 http //www.motioncomputin g.
Index 90 pen 6 calibrating 23 care and main tenance 72 disable function butt on 25 disabling pen input 24 taking care of 72 troubleshooting 78 Pen & Input Devices 25 Pen and Button Options 32 pen .
Index 91 19 optional features 2 shutting down 56 software 70 training tutorials 86 Tablet PC input panel 28, 29 Tablet PC Tips & Tricks 16 taskbar 10, 19 moving to left 19 text entering 27–30 to.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Motion J3600 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Motion J3600 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Motion J3600 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Motion J3600 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Motion J3600, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Motion J3600.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Motion J3600. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Motion J3600 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
