Manuale d’uso / di manutenzione del prodotto XD80 del fabbricante Mitsubishi
Vai alla pagina of 64
IMPORT ANT * DLP™ (Digital Light Processing) and DLP™ chip are registered trademarks of T exas Instru-ments Incor porated (U .S.A.). * V GA and XGA are trademarks or registered trademarks of Inter national Business Machines Corporation (U.S .A.). * S-V GA is a registered trademark of Video Electronics Standards Association.
E-1 IMPORT ANT SAFETY INFORMA TION CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK) NO USER-SER VICEABLE P AR TS INSIDE REFER SER VICING T O QU ALIFIED SER VICE PERSONNEL.
E-2 IMPORT ANT SAFETY INFORMA TION Please read all these instructions regarding your projector and retain them f or future reference . Follo w all war nings and instructions marked on the projector . 1. Read instructions All the saf ety and operating instructions should be read bef ore the appliance is operated.
E-3 IMPORT ANT SAFETY INFORMA TION COMPLIANCE NOTICE OF FCC This equipment has been tested and f ound to comply with the limits for a Class B digital de vice, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonab le protection against har mful interference in a residential installation.
E-4 Major Featur es 䡵 Evolution of the Best Seller Mobile Pr ojector The newly de veloped Iris Lens Cov er and Auto K eystone permit speedy setup and projection, and after the presentation is finished, just s witch off the power of the projector and the Instant Shut Do wn function allows it to soon be mov ed to another location.
E-5 T able of Contents IMPORT ANT SAFETY INFORMA TION ................................................................................... E-2 Major Features ..............................................................................................
E-6 T able of Contents View ........................................................................................................................... ............ E-45 Aspect ..........................................................................
E-7 Checking the Supplied Accessories Remov e the main unit and the accessories from the box and chec k that the follo wing items are included. Carrying case (for projector and accessories) [1] This is a case designed f or storing the projector and its acces- sories.
E-8 Names of the Main Unit Parts E CL O Z STA TUS STAN DBY S O U R C E AUTO MENU DUAL COLOR MODE Adjuster button [E-23] (Also on opposite side) F ocus ring [E-23] Exhaust vents F ront adjusters [E-23].
E-9 Names of the Main Unit P ar ts AUDIO S-VIDEO VIDEO RGB AUDIO S-VIDEO VIDEO RGB ST AT U S STANDBY SO U R C E AUTO MENU DUAL COLOR MODE ST ATUS ST ANDBY MENU DU AL COLOR MODE SOURCE AUTO V entilatio.
E-10 Names of the Remote Contr ol Parts RGB VIDEO FREEZE MUTE LAMP MODE AUTO ASPECT TIMER VOL KSTN ZOOM CANCEL QUICK MENU ENTER Q STANDBY 123 4 Infrared transmitter [E-11] V OL button [E-27] (V olume adjustment) ST ANDBY button [E-19, 21] This button is used to s witch ON the pow er and set the unit to the ST ANDBY mode.
E-11 Using the r emote control for the first time The battery compar tment is fitted with a transportation insulation sheet at the time of shipping. Pull out the sheet and remov e it. The remote control is no w ready for use. Replacement Method 1 (A) With the knob pressed to the right side, (B) draw out the battery case.
E-12 The Pr ocedur e Up to Projecting to the Scr een P erform setup adjustments in the following order . 1 P osition the projector Deter mine the locations to set up the screen and the projector . See “Placement Guide” on P age E-13. 2 Connect the video equipment and personal computer Connect your equipment to the pr ojector .
E-13 Placement Guide • Use this information as a guide to find out about the screen siz e when the projector is placed at a certain location, or to find out the appro ximate siz e of a screen that will be required. • The pr ojection distance over which focussing is adjustab le is 1.
E-14 Connecting Personal Computers and V ideo Equipment Connecting this unit with a personal computer permits presentation data to be pr ojected as a large screen display at conferences, lectures, and on other occasions.
E-15 Connecting P ersonal Computer s and Video Equipment T o Output the External Output Signal of a Notebook Computer When projection will be with a notebook computer connected, knowledge will be required f or the cable connection and notebook computer star tup procedure as well as the operation that f ollows notebook startup.
E-16 VIDEO S-VIDEO Connecting P ersonal Computer s and Video Equipment Connections with Composite Signals V ideo Equipment with VIDEO Connectors • Connect to the projector’ s VIDEO connector using a commercially a vailab le video cable . Please attach the supplied f err ite core to the video cable as described below .
E-17 Cr Cb Y Pr Pb Y COMPONENT COMPONENT Component cable (A vailab le as an option) (Mini D-sub 15-pin to RCA ⳯ 3) (Order code: 246C558-10) Connecting P ersonal Computer s and Video Equipment Connec.
E-18 R L AUDIO OUT Connecting P ersonal Computer s and Video Equipment Connections with the AUDIO Jack * Connect to the projector’ s A UDIO jack using a commercially av ailable audio cab le. If the other device has an RCA phono type audio jac k, connect via a commercially availab le audio conv er ter cable.
E-19 Power Cable Connections and Switching the Power On/Of f There is an order in whic h the power cable is connected and the po wer is switched on/off. AUDIO RGB S-VIDEO VIDEO STATUS S T A N D B Y S O U R C E AUTO MENU D U A L C O L O R M O D E Firmly plug in all the wa y .
E-20 When [Menu Language Select] is Displayed Upon Switching On the Power The first time the power is s witched on after purchase, [Menu Lan- guage Select] will be displa yed. Follo w the procedure descr ibed be- low and select the displa y language of the projector .
E-21 P ower Cab le Connections and Switching the P ower On/Off Finishing 1 Switch off the power of the connected equip- ment 2 Switch off the power of the pr ojector Press the ST ANDBY button.
E-22 Adjustment of the Pr ojection Scr een Switch on the power of the connected equipment and make the adjustments with the video signal being input to the projector . 2 Adjust the projection image to the screen. Check that the screen is set le v el and ver tically .
E-23 Adjustment of the Projection Screen E CL O Z STA T US STANDBY SOURCE AUTO MENU D U A L C O L O R M O D E ( 1 ) ( 2 ) ( 1 ) Note: When the projector has a rear installation is used, the orientation of the projection will need to be changed. Please see “ Vertical Flip / Horizontal Flip ” on Page E-46.
E-24 General Operation This section describes the use of direct operation with the main unit or remote contr ol buttons. For information about operation using the men u, see “ Menu Operation Method ” on P age E-33 and the various items on P ages E-40 to E-53.
E-25 General Operation Selection of Aspect Ratio Note: When selection has been made for the “ Real ” setting of the personal computer signal (i.e., when the input signal and the projector display .
E-26 ST ATUS ST ANDBY MENU DU AL COLOR MODE Fr eezing a Moving Picture This function is used to stop and vie w a moving picture. Note that the input image continues to adv ance ev en though the picture there is a still picture condition. A press of the FREEZE button c hanges the screen to a still picture .
E-27 The dotted lines indicate the pr oper condition Keystone Manual Adjustment Use this to adjust f or trapezoidal (keystone) distortion of the pro- jected image. The projector has both an automatic and a man ual key- stone adjustment function. The manual adjustment will be described here.
E-28 General Operation Enlargement of the Image and V ideo Movement Note: * Zoom and image movement functions are cancelled when the input is switched. * The greater the zoom enlargement, the less distinct the image will appear . The reason for this is that the dots are being digi tally corrected so that they are not conspicuous.
E-29 General Operation Using the Pr esentation Timer Note: * The timer display will be closed while the menu or the quick menu is displayed, and while a message is displayed; however , the timer will still be operating at such times. Also, the timer will not be displayed unless a signal is being input.
E-30 General Operation Pr otecting the Projector with the Security Lock A passw ord can be registered and the security loc k set in order to pr otect the projector from unauthorized use. Registering the passw ord The pass word is registered using the menus.
E-31 General Operation If the passw ord input displa y appears when the power is turned on When a pass word has been registered, the “Pass word” input windo w appears on the projected image when the power is turned on. The projector continues projecting this image until the correct pass word is input.
E-32 General Operation Using the Quick Menu Dual Color Mode Select the preset color mode. See page E-42. Brightness Adjusts the brightness of the image. See page E-40. Contrast Adjusts the contrast of the image. See page E-40. V olume This function adjusts the v olume of the built-in speaker .
E-33 Menu Operation Method • This section describes only the men u operation method. Please see this item should you need inf ormation while perf orming menu operations. • For information about a men u function, adjustment, or setting, please see one of the pa ges containing such descrip- tions.
E-34 Menu Operation Method Menu Screen Names and Functions Menu Name This is the title of the menu. There is a change to the title screen when the menu is selected. The cursor mov es to the selected menu name. Cursor (Deep Blue) This permits setting/adjustment of the item located at the cursor position.
E-35 Menu Operation Method Performing Menu Operations • Only “ Setup ” , “ Options ” and “ Info. ” can be selected when no signal is being input. • The menu displa y will close if, after pressing a button, the next b utton operation is not made within 30 seconds.
E-36 3 Press the SELECT 왔 button to display the item name selection cursor . Displaying the Cursor This condition al- lows selection of the item name.
E-37 Menu Operation Method 6 Press the MENU button and close the menu display Closing the Menu RGB STANDBY VIDEO FREEZE MUTE LAMP MODE AUTO ASPECT TIMER VOL KSTN ZOOM CANCEL QUICK ENTER Q 123 4 MENU Selecting Another Menu Name with Remote Contr ol Operation When a sub menu is displa yed, press the CANCEL but- ton and close the sub menu.
E-38 List of Item Names Of fering Input Selection and Adjustments/Settings The item names that can be adjusted/set will differ depending on the input signal.
E-39 RGB Component VIDEO S-VIDEO Menu name Setup Info. Auto Source E-47 嘷嘷嘷嘷 Item Name Reference Page Sub Menu Item Name Auto Power Off E-47 嘷嘷嘷嘷 嘷嘷 嘷 嘷嘷 嘷 Menu Position La.
E-40 Image • P erform this operation while pr ojecting the picture for which the adjustment/setting will be made. • Select the menu name “ Image ” . See “Menu Operation Method” on Page E-33 f or information about perf or ming menu operations .
E-41 Fine Pictur e Adjust this when the picture shows a lac k of color fidelity or flickering. Select the “Fine Picture” item name and adjust with the SELECT ( 왗왘 ) but- tons so that the lack of color fidelity or the flic ker ing disappears. Image H Position Adjust this when the picture is shifted to the left or right.
E-42 Color • Do the f ollowing operation while displaying the ima g e y ou want to adjust or set. • Select the menu name “ Color ” . See “Menu Operation Method” on Page E-33 f or information about perf or ming menu operations . The item name displa y will diff er depending on the input signal.
E-43 Color Color T emp. The screen color is affected b y the color of the illumination and other extraneous light. This function adjusts the white, which is the reference color f or video equipment, and impro ves the quality of color reproduction. Adjustment can also be used to enhance skin colors.
E-44 White Balance Color This function automatically adjusts the b lack le vel and the white level of the analog RGB input signal to suit the personal computer . 1 Select the item name [White Balance] and press the ENTER b utton. The displa y will change to [Input Black Signal].
E-45 V iew • P erform this operation while pr ojecting the picture for which the adjustment/setting will be made. • Select the menu name “ View ” . See “Menu Operation Method” on Page E-33 f or information about perf or ming menu operations .
E-46 V er tical Flip / Horizontal Flip In selecting the method of pr ojecting to the screen, these functions are set when the pr ojector is in a rear screen installation. Select the item name “V er tical Flip” or “Hor izontal Flip” and select the setting contents with the SELECT ( 왗왘 ) buttons .
E-47 Setup • Select menu name “ Setup ” . See “Menu Operation Method” on Page E-33 f or information about perf or ming menu operations . The item name displa y will diff er depending on the input signal. See “List of Item Names Off ering Input Selection and Adjustments/Settings” on P age E-38.
E-48 Setup Menu Position This function sets the display position of the men u. Select item name “Menu P osition” and select the setting contents with the SELECT ( 왗왘 ) b uttons.
E-49 Setup Input Format This function is used in setting the input signals of the input connec- tors. Normally , this should be set to A uto. When identification is not possible with Auto, make the setting. Select the item name “Input F or mat”, press the ENTER button, and the sub menu will open.
E-50 Option • Select menu name “ Option ” . See “Menu Operation Method” on Page E-33 f or information about perf or ming menu operations . The item name displa y will diff er depending on the input signal. See “List of Item Names Off ering Input Selection and Adjustments/Settings” on P age E-38.
E-51 Startup Screen Option This is the selection of whether or not to displa y the logo screen at startup time . Select item name “Star tup Screen” and select the setting contents with the SELECT ( 왗왘 ) buttons . Logo ........... Displays the logo.
E-52 Info. • Select menu name “ Info. ” . See “Menu Operation Method” on Page E-33 f or information about perf or ming menu operations . The item name displa y will diff er depending on the input signal. See “List of Item Names Off ering Input Selection and Adjustments/Settings” on P age E-38.
E-53 Resolution / Frequency Info. This function displa ys the resolution and frequency of the detected in- put signal. Lamp Timer This displays the lamp timer . This projector has an Low mode function. The lamp life will diff er between Normal mode and Low mode.
E-54 When an Indicator is Lit or Blinking ST A TUS ST ANDBY SOURCE AUTO MENU DUAL COLOR MODE STA TUS ST ANDBY STA TUS ST ANDBY STA TUS ST ANDBY STA TUS ST ANDBY STA TUS ST ANDBY The indicators on the pr ojector ’ s control panel light or flash to notify of pr oblems, as described below .
E-55 T roubleshooting Check the following matters before r equesting servicing. • Is the pow er cord plugged into a power outlet? • Is the lamp cov er properly mounted? • Is the projector’ s temperature high? T o protect the projector , the power can- not be tur ned on when the projector’ s temperature is abnor mally high.
E-56 Cleaning • Be cer tain to disconnect the power plug from the po wer outlet before cleaning. • Do not spra y or otherwise expose the projector , lens, or screen to volatile substances such as insecticides. Do not leave rubber or vinyl products in contact with the projector f or long per iods.
E-57 • The lamp that is used as a light sour ce in the projector has a limited service life. The rated ser vice life of the lamp is about 1500 hour s (when used in normal mode only). This could be shor tened depending on conditions of use and other factors.
E-58 1 2 3 Replacing the Lamp Cartridg e Preparations: T ur ning the projector upside-down on top of a soft cloth, etc., so that it does not get scratched mak es it easier to replace the lamp car tridge. T ur n the projector r ight-side up after replacing the lamp car tr idge.
E-59 1 2 Replacing the Lamp Cartridg e 5 Mount the new lamp cartridge . (1) Push the lamp car tridge in slowly . (Line it up with the screw holes in the projector .) 6 Mount the lamp cover . (1) Set the tip of the lamp cover in place , then close the lamp cov er .
E-60 Specifications Model XD80U Optical Method of projection : DLP™ (single DLP™ chip) DLP™ chip 0.7 inches 1024 ⳯ 768 dots Lamp 130 W high pressure mercur y lamp Projection lens : Manual zoom ( ⳯ 1.2), Man ual focus F = 2.6 – 2.9, f = 27.
E-61 T able of Supported Fr equency The projector automatically identifies the signal input from the computer and selects the optimum resolution as sho wn on the ta ble below . Manual adjustments ma y be required for some input signals. See “Picture Adj.
E-62 STA TUS STANDBY SOURCE AUTO MENU DUAL COLOR MODE Cabinet Dimensions Unit: mm (inch) 186 (7.3) 46 (1.8) 176 (6.9).
M I T SUBIS HI ELECTRIC CORPORAT I ON 1 Zusho Baba, Nagaokakyo-City , K yoto J apan.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Mitsubishi XD80 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Mitsubishi XD80 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Mitsubishi XD80 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Mitsubishi XD80 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Mitsubishi XD80, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Mitsubishi XD80.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Mitsubishi XD80. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Mitsubishi XD80 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
