Manuale d’uso / di manutenzione del prodotto PK20 del fabbricante Mitsubishi
Vai alla pagina of 52
EN-1 LED Projector MODEL PK20 User Manual This User Manual is important to you. Please read it before using your projector..
EN-2.
EN-3 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
EN-4 WARNING Only use the attached specified AC adapter and power cord. If you use another AC adapter and power cord, it may cause interference with radio and television reception or damage your projector. The attached AC adapter and power cord are to be used exclusively for this product.
EN-5 Declaration of Conformity Model Number : PK20 Trade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A Telephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules.
EN-6 Impor tant safe guar ds Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1 . Read instructions All the safety and operating instructions should be read before the appliance is operated.
EN-7 1 1 . Power-cord protection Power-supply cord should be routed so that it is not likely to be walked on or pinched by items placed upon or against it. Pay particular attention to cord at plug, convenience receptacles, and points where it exit from the appliance.
EN-8 WARNING: Unplug the power cord or remove the battery immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector, adaptor or battery. It may cause fire or electric shock.
EN-9 Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols near the projector. Flammable substances may ignite causing fire or breakdown because the temperature inside the projec- tor rises very high while the lamp is illuminating.
EN-10 Ov er view 1 2 5 7 4 8 6 3 COMPUTER VIDEO COMPUTER VIDEO AUTO POSITION AUTO POSITIO N 1 Focus ring 2 Control panel 3 Terminal cover 4 Terminal board 5 Air outlet grille 6 Lens 7 Remote control s.
EN-11 Power supply Using the provided AC adapter or an optional Lithium-ion rechargeable battery . Warning: The projector must be used with the provided AC adapter. Damage caused by the use of an incorrect adapter is not covered under the warranty. Using the AC adapter 1.
EN-12 4. Insert the plug from the AC adapter into the DC IN terminal. 5 . Insert the appropriate end of the power cord into the AC adapter. 6 . Insert the plug on the power cord into a wall outlet. The CHARGE indicator lights red when charging is started and turns off when charging is completed.
EN-13 When you use the battery, please observe the following safety precautions: Warning: Dispose of used batteries according to your local regulations. Please do not put battery into fire or heat, otherwise it may cause heating, fire, rupture or explosion.
EN-14 R emote contr ol Catch Battery holder 1 Power button 2 Four directional buttons 3 Enter button 4 Menu button 5 Volume buttton 6 Keystone button 7 Hi-Bright button 8 Computer button 9 Video butto.
EN-15 Remote Control Precautions Handle the remote control carefully. Do not use the remote control if it got wet. Remove the battery immediately. Make sure the remote control and battery are dry before use. Avoid excessive heat and humidity. Do not place the battery upside down.
EN-16 Installation Layout of the projector Image size varies depending on the distance between the screen and the projector. Front projection Caution: Do not place the projector on a carpet or any flammable materials.
EN-17 Using the tripod Mount the projector onto a tripod as shown in the illustration. Important: After attaching the tripod plate onto the projector, be sure that the adjustable rubber foot is properly tighten. Do not place the tripod on inclined or unstable surfaces.
EN-18 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player, or personal computer that have analog RGB output connectors. Important: Make sure that the connected device is turned off before starting connection.
EN-19 Projector + DVD player or HDTV Some DVD players have an output connector for 3-line fitting (Y, C B , C R ). When connecting such DVD player with this projector, use the COMPUTER IN terminal. Important: The terminal’s names Y, P B , and P R are given as examples of when a HDTV decoder is connected.
EN-20 Caution: Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord. Do not plug in or out the power cord with your hand wet. It may cause electric shock. Important: Install the screen on a flat wall at 90 degrees to the floor.
EN-21 Important: When the keystone adjustment is carried out, the adjustment value is indicated. Note that this value doesn’t mean a projection angle. The allowable range of the adjustment value in the keystone adjustment varies depending on the installation conditions.
EN-22 Power-on 1 . Turn on the device connected to the projector first. 2. Plug the AC adapter in both the projector and the wall outlet. The POWER indicator lights up. The CHARGE indicator lights up when the projector connects with a not fully charged optional battery.
EN-23 Power-off Use the following procedure to turn off the projector. Do not turn off the projector by unplugging the power cord while the lamp is on. Unplugging while the lamp is on degrades the lamp’s performance and causes failure in the projector.
EN-24 On the remote control Keystone button Press this button to adjust image distortion caused by tilting the projector. Once the keystone control bar appears on the screen, and adjust the image by pressing the S T buttons .
EN-25 Menu operation AUTO SOURCE ON/OFF LOW Split -25 - +25 -25 - +25 * 1 : Not active when connect with VGA signal and SD card * 2 : Not active when connect with Video signal and SD card * 3 : Not ac.
EN-26 1 IMAGE BRIGHTNESS MODE. . . Use to select the brightness mode. • The white color looks greenish so that LED lights out become maximum, when the brightness mode is set to high. • During the high brightness mode, color temperature is not selectable.
EN-27 KEYSTONE................ ............... Use to adjust the image distortion caused by tilting projection. (See page 24) AUTO POWER ON.................. When ON is chosen, the lamp is automatically lit when the power cord is plugged in the wall outlet or battery is attached.
EN-28 3 FEA TURE MENU POSITION................ Use to select the position of the menu on the screen, 1. (upper left) or 2. (lower right). ANAMORPHIC..................... Select ON when playing widescreen images. LANGUAGE......................... Use to select the language used in the menu.
EN-29 Using the SD card viewer This projector enables you to read JPEG and MPEG files from the SD card and show the images on a screen. This can be used to give a presentation and/or present a slide show without using a computer. Important: The input method cannot be changed with the button on the main unit during the [VIEWER] input display.
EN-30 When you use JPEG files When you use JPEG files which are edited and stored by using graphic software with a PC, thumbnail and JPEG file display may take time. (Use of JPEG files which are stored directly on digital cameras is recommended.) Thumbnail and JPEG file display may take time for large files.
EN-31 Current file name Name of file or folder framed in red Time of updated (date - time) JPEG file Movie file Non-playable file File information Folder area File area Displaying thumbnails 1 . Insert an SD card to the SD card slot on this projector.
EN-32 3-1. Displaying JPEG images Display thumbnails in the thumbnails screen. Move the red frame using the / / buttons to select the file you want to play (show) and press the ENTER button. The image changes and a slide appears. To open a folder, move the red frame to the target folder and press the ENTER button.
EN-33 3-3. Playing an MPEG format Select a movie file you want to see from the thumbnail display and press the ENTER button in the same way as displaying a JPEG image. Press the ENTER button to stop the MPEG display and return to the thumbnail display.
EN-34 Image adjustment Image adjustment You can adjust the image using the IMAGE menu. To control the white-to-black level of the image: Adjust CONTRAST in the IMAGE menu. Press the button to increase the contrast and the button to reduce it. To control the light level of the image: Adjust BRIGHTNESS in the IMAGE menu.
EN-35 To move the image vertically: Adjust VERT. POSITION in the SIGNAL menu. Press the button to move the image upward. Press the button to move the image downward. When the image flickers: Adjust FINE SYNC. in the SIGNAL menu. Simple adjustment method 1 .
EN-36 T roubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consult this chart before contacting your dealer. Images aren’t projected on the screen. Problem Power isn’t turned on. Images aren’t projected on the screen.
EN-37 No source found. The projector is turned off. Turn on the power of the connected device, or check whether there is something wrong with the connected device. Check whether the external device outputs signals. (Check this especially when the external device is a notebook computer.
EN-38 Problem Cause and solution This is due to color breaking noise that occurs in a DLP system and is not a malfunction. It occurs because of interference with the screen and isn’t a product malfunction. Change the screen or readjust the focus of the projector.
EN-39 Others This air comes out as a result of cooling the inside of the projector. This isn’t a product malfunction. The microcomputers inside the projector may be wrongly operating because of noise. Press the POWER button to turn off the lamp and unplug the power cord from the wall outlet.
EN-40 Maintenance Caution: Be sure to turn off the lamp and unplug the power cord from the wall outlet before you perform any maintenance on the projector. Cleaning of the projector and the ventilation slots Use a soft cloth to clean the projector and the ventilation grilles.
EN-41 LAMP (Green) ON OFF POWER (Red) OFF ON CHARGE (Red) OFF OFF CONDITION System ON System standby Nor mal condition (AC Adaptor onl y) Indicators This projector has three indicators, each of which shows the operation condition of the projector. The following offer solutions to possible problems.
EN-42 Nor mal condition (Batte r y onl y) Abnor mal condition POWER (Red) OFF ON ON CHARGE (Red) OFF OFF OFF CONDITION System ON System standby Low Battery (System turned off) LAMP (Green) ON OFF OFF .
EN-43 Type DLP projector Model PK20 Rated input 15V, 2.4A Display technology Single 0.55” DLP panel Native resolution 800 x 600 pixels Colors 16,777,000 colors Projection lens Fixed zoom with focus adjustment; F2.
EN-44 Dimensional drawings (unit : mm) 48.2 mm 123.0 mm 97.0 mm 123.0 mm 97.0 mm 48.2 mm 22.8 mm 25.7mm.
EN-45 What’s included in the box 1 Soft Carrying Bag P7939-3000-00 1 CD ROM (User manual) P7939-A001-00 1 Quick Reference Guide P7939-4001-00 1 Composite Video Cable 02552-0068-00 1 Remote Control (.
EN-46 Signal mode Resolution (H x V) Horizontal frequency (kHz) Vertical frequency (Hz) VGA 60 640 x 350 31.47 59.94 VGA 85 640 x 350 37.86 85.08 VGA mode3 640 x 480 31.47 59.94 M A C 640 x 480 37.86 72.00 VGA VESA 72 640 x 480 37.86 72.80 VGA VESA 75 640 x 480 37.
EN-47 Important: Some computers aren’t compatible with the projector. The projector’s maximum resolution is 800 x 600 pixels. It may not display images of higher resolutions than 800 x 600 correctly. Images with SYNC on G (Green) signal may jitter.
EN-48 MITSUBISHI Projector Contact Infor mation Nor th America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.ca Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada Sales & Technical Inquiries Phone : +1-(800) 450-6487 Fax : +1-(905) 475-7958 E-mail : projectors@mitsubishielectric.
EN-49 Sales & Technical Inquiries Phone : +39-(0)39-60531 Fa x : +39-(0)39-6053214 E-mail : info.projector@it.mee.com MEU-NL (Mitsubishi Electric Europe B.
EN-50 Sales Inquiries Phone : +86(21) 5211-0882-3002 Fa x : +86(21) 5211-0576 Technical Inquiries Phone : +86(21) 5211-0882-3020 Fa x : +86(21) 5211-0576 HONG KONG (Mitsubishi Electric Ryoden Air-Conditioning & Visual Information Systems (HongKong) Ltd.
EN-51 Sales Inquiries Phone : +65-6473-2308 Fa x : +65-6475-9503 E-mail : Peripherals@asia.meap.com Technical Inquiries Phone : +65-6470-2666 Fa x : +65-6475-9503 STC (Setsuyo Astec Corporation Seoul .
EN-52 MITSUBISHI ELECTRIC CORPORATION Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Mitsubishi PK20 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Mitsubishi PK20 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Mitsubishi PK20 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Mitsubishi PK20 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Mitsubishi PK20, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Mitsubishi PK20.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Mitsubishi PK20. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Mitsubishi PK20 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
