Manuale d’uso / di manutenzione del prodotto 2282-20 del fabbricante Milwaukee
Vai alla pagina of 19
Milwaukee 2282 - 20 1 EN Table of Contents Genaral Safety Instructions - - - - - - - - - - - - - 2 Instrument Set-up - - - - - - - - - - - - - - - - - - - - - - - 3 Introduction - - - - - - - - - - - .
Milwaukee 2282 - 20 2 EN Genaral Safety Instructions WARNING Read all safety warnings and instructions. Before using the appliance, read these safety instructions, the appliance’s oper- ator’s manual (found on the enclosed CD) and all labels on the appliance.
Milwaukee 2282 - 20 3 EN Instrument Set-up Introduction The safety instructions and the user manual should be read through carefully before the product is used for the first time. The person responsible for the product must ensure that all users understand these directions and adhere to them.
Milwaukee 2282 - 20 Instrument Set-up 4 EN Display Horizontal measure- ment Units Stake out Slope distance Circumfer- ence Measuring reference 2nd result Area / Volume Angle Wall area Addition / Subtr.
Milwaukee 2282 - 20 Instrument Set-up 5 EN Labeling Laser Radiat ion Do not star e into the beam Laser class 2 acc. IEC 6 0825-1:2007 Maximum radia nt power: <1mW Emitted wavel eng th : 620- 690nm Beam diver gence: 0. 16 x 0.6 mrad Impulse durat ion: 0.
Milwaukee 2282 - 20 6 EN Operations Switching ON/OFF Clear Message Codes 2 sec Device is turned OFF. i Press ON but- ton 2 sec to start continuous laser mode. If no key is pressed for 180 sec, the device switches off au- tomatically. 1x Undo last a cti on.
Milwaukee 2282 - 20 Operations 7 EN Adjusting measuring reference / tripod Distance is measured from the front of the device. 1 Distance is measured from the tripod thread permanently. 2 Distance is measured from the rear of the device (standard setting).
Milwaukee 2282 - 20 Operations 8 EN Distance unit setting Tilt unit setting 0.000 m 0.0000 m 0.00 m 0.00 ft 0‘00‘‘ 1/32 0.00 in 0 in 1/32 Switch between the following units: 2 sec 0.0 ° 0.0 % 2 sec simult aneously Switch between the following units: Timer (automatic release) s 1 Adjust delay of au- tomatic release (max.
Milwaukee 2282 - 20 9 EN Measuring Functions Measuring single distance 1 Aim active laser at target. 2 8.532 m 3 i Target surfaces: Measuring errors can occur when meas- uring to colourless l iquids, glass, styrofoam or semi-per- meable surfaces or when aiming at high gloss surfac- es.
Milwaukee 2282 - 20 Measuring Functions 10 EN Area 1 1x 2 Aim laser at first target point. 3 4 Aim laser at sec- ond target point. 24.352 m 2 5 i The result is shown in the main line and the measured value above.
Milwaukee 2282 - 20 Measuring Functions 11 EN Volume 1 2x 2 Aim laser at first target point. 3 4 Aim laser at sec- ond target point. 5 6 Aim laser at third target point. 78.694 m 3 7 i The result i s shown in the main line and the measured value above.
Milwaukee 2282 - 20 Measuring Functions 12 EN Pythagoras (2-point) 1 2 Aim laser at up- per point . 3 4 Aim laser rectan- gular at lower point. 8.294 m 5 i Notice additional Pythagoras measurement in- formation at the bottom of the next page. Pythagoras (3-point) 1 2x 2 Aim laser at up- per point .
Milwaukee 2282 - 20 Measuring Functions 13 EN Pythagoras (partial height) 1 3x 2 Aim laser at upper point. 3 4 Aim laser at 2nd point. 5 6 Aim laser at rec- tangular point. 2.602 m 7 i • Pressing the measuring key for 2 sec in the functi on activates automatically Minimum or Maximum measurement.
Milwaukee 2282 - 20 Measuring Functions 14 EN Stake out i Two different distances (a and b) can be entered to mark off de- fined meas- ured len gths. 1 2 3 a = b a b b 1 2 3 a b b a = b 1 .000 m 1 4x 1. 01 2 m Adjust value "a". 2 3 Approve value "a".
Milwaukee 2282 - 20 Measuring Functions 15 EN Smart Horizontal Mode 1 Aim laser at target. 2 z x y 0.032 m 5.20 4 m 40.8 ° 4.827 m x y z 3 (up to 360° and a tra nsverse tilt of ±10°) i Press key again to switch off horizontal measure- ment.
Milwaukee 2282 - 20 Measuring Functions 16 EN Memory (20 last displays) Delete Memory 8.294 m 20 20 last displays are displayed. 1 8.294 m 20 Navigates trough 20 last displays. 2 The value from the main line can be used for fur- ther calculations. 2 sec 3 2 sec simultaneously Memory is completely de- leted.
Milwaukee 2282 - 20 17 EN Calibration Calibration of tilt sensor (Tilt Calibration) 1 2 sec simultane- ously 2 Place device on absolutely flat sur- face. 3 180° 4 Turn the device horizontal ly by 180° and place it again on absolutel y flat surface. 5 6 Turn the device and place it again on ab- solutely flat surface.
Milwaukee 2282 - 20 18 EN Technical Data * applies f or 100 % target reflectivity (white pain ted wall), low backg ro un d illu min at ion, 25 ºC ** applies fo r 10 to 500 % target ref lectivit y, high back- ground illumin ation, - 10 ºC to + 50 ºC *** Tolera nces apply fr om 0.
Milwaukee 2282 - 20 Care 19 EN Care • Clean the device with a damp, soft cloth. • Never immerse the device in water. • Never use aggressive cleaning agents or solvents. Service - United States MILWAUKEE prides itself in producing a premium quality product that is Nothing But Heavy Duty ® .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Milwaukee 2282-20 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Milwaukee 2282-20 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Milwaukee 2282-20 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Milwaukee 2282-20 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Milwaukee 2282-20, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Milwaukee 2282-20.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Milwaukee 2282-20. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Milwaukee 2282-20 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
