Manuale d’uso / di manutenzione del prodotto MIL-S8000G del fabbricante Milan Technology
Vai alla pagina of 22
8-Port Gigabit Switch MIL-S8000G User Guide Eight Auto-negotiation 10/100/1000Mbps Gigabit Ethernet RJ-45 Ports. Each port with Auto MDI/MDIX..
Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 Number 950 - EN60950 - CE EN55022 Class A EN55024 Canadian EMI Notice This Class A digital apparatus meet s all the requirements of the Canadian Interference-Causin g Equipment Regulations.
1 T able of Content s 1. Introduction Features Package Contents 2. Hardware Description Front Panel LED Indicators Rear Panel 3. Installation Desktop Installation Rack-mount Installation Power On 4. Network Application Backbone Switch 5. Network Configuration Login to the Console Interface 5.
2 1. Introduction Gigabit Ethernet over copper technology is a cost-effective way for network equipment to be upgraded from Fast Ethernet to Gigabit speeds without the use of expensive fiber opti cs cabling. Gigabit networks create high-speed backbone connections bet ween switches, servers, databases and end stations.
3 Package Content s MIL-S8000G 8 port Gigabit switch Power Cord Four Adhesive Rubber Feet User’s Manual W arranty Card Compare the content s of your MIL-S8000G package with the standard checklist above. If any it em is missing or damaged, please contact your local deal er for service.
4 2. Hardware Description Front Panel The Front Panel of the 8-Port Gigabi t Switch consists of eight auto- negotiation 10/100/1000Mbps Ethernet RJ-45 connectors, supporting automatic MDI/MDIX, and four LED- indicators (1000M, 100M, LK/ACT , FUL/COL) for each Gigabit port.
5 LED S t atus Description Green Power On Power Off Power is not connected Green The port is operating at the speed of 1000Mbps. 1000M Off No device attached or in 10/100Mbp s mode Green The port is operating at the speed of 100Mbps. 100M Off No device attached or in 10Mbp s mode Green The port is connecting with the device.
6 3. Inst allation Desktop Inst allation Set the switch on a sufficiently large flat sp ace with a power outlet nearby . The surface should be clean, smooth, level, and sturdy . Make sure there is enough clearance around the switch to allow attachment of cables, power cord and air circulation.
7 Figur e 3-2. Attach mounting br ackets with scr ews B. After att aching both mounting brackets, position the MIL-S8000G switch in the rack by lining up the holes in the brackets with the appropriate holes on the rack. Secure the switch to the rack with a screwdriver and the rack-mounting screws.
8 4. Network Application The MIL-S8000G Switch can be used connect servers, switches, workstations, and PCs (a Gigabit 1000Base-T NIC is required for PC installation) to each other by connecting these devices directly to the Switch.
9 Workgroup A Workgroup B Figur e 4-1. An example of a ne twork connection, with the MIL-S8000G Switch acting as the cor e switch. This switch is an ideal solution for backbone connectivity . In the above example, servers, department swit ches, and workst ations are directly connected to the core swit ch, the MIL-S8000G Switch.
10 5. Network Configuration The Console port is a female DB-9 connector that enables a connection to a PC or terminal for monito ring and configuring the MIL-S8000G Switch. Use the supplied RS-232 cable with a male DB-9 connector to connect a terminal or PC to the Console port.
11 Login to the Console Interface When the connection between Switch and PC is finished, turn on the PC and run a terminal emulation program or Hyper T erminal . Configure the communication parameters to ma tch t he following default characteristics of the console port: Figur e 5-2.
12 5.2 Port Configuration Figur e 5-4. The Port Configuration menu Select each port to change the status , toggle the Enable / Disable field and enter the appropriate value in the Flow Control field.
13 5.3 Mirror Configuration Figur e 5-5. The Device Configuration Setup menu Figur e 5-6. The Device Configuration Setup menu By enabling port mirroring, the source port will be forwarded to the target port. Select either Enable or Disable by using the <Backspace> key.
14 5.4 VLAN Configuration Figur e 5-7. The VLAN Configuration menu Assigning physical ports within a work group is a simple and common method of defining a virtual work group – VLAN. It delivers the benefit of broadcast control and simplifies config uration for the network manager .
15 5.5 VLAN Setup Figur e 5-8. The VLAN Setup menu Select the VLAN entry to Enable or Disable the VLAN group. Use the <Backsp ace> key to Enable (add) or Disable (remove) ports in the VLAN group.
16 5.7 Miscellaneous Configuration Figur e 5-10. The Misc. Configuration menu Select each port to change the status , toggle the Enable / Disable field and enter the appropriate value in the Aging T ime field.
17 6. T roubleshooting This troubleshooting section is intended to help solve many common problems that might occur when inst alling the MIL-S8000G . The switch can be easily monitored through panel indicators to assist in identifying problems.
18 7. MIL-S8000G T echnical S pecifications St andards Compliance IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet ANSI/IEEE 802.
.
Part No. 90000404_A.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Milan Technology MIL-S8000G è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Milan Technology MIL-S8000G - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Milan Technology MIL-S8000G imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Milan Technology MIL-S8000G ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Milan Technology MIL-S8000G, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Milan Technology MIL-S8000G.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Milan Technology MIL-S8000G. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Milan Technology MIL-S8000G insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
