Manuale d’uso / di manutenzione del prodotto W 360 WPS del fabbricante Miele
Vai alla pagina of 68
Operating instructions for Washing machine W 360 WPS It is essential to read these operating instructions before Q installing or using the machine, to avoid the risk of accident, or damage to the machine.
Caring for our environment Disposal of the packing mate ria l The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc.
Contents Caring for our environment Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Disposal of your old appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washing environmentally and economically . . . . . . . . . . . . . . . . . . . . . . . . . . 15 How to wash correctly Before washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Programme chart .
Cleaning and care Extra cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Cleaning the detergent dispenser drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Cleaning the fluff (drain) filter and pump .
Warning and safety instructions Read the operating instructions be- fore using this machine for the first time. They contain important infor- mation about the safety, use and maintenance of the machine. This way you will avoid the risk of acci- dents and damage to the machine.
The Miele “Waterproof system” pro- tects from water damage provided the following conditions have been met: – the machine is correctly plumbed in and connected to the electricity sup- ply. – if a fault has been identified, the ma- chine must be examined by a com- petent person before further use, and repaired if necessary.
7 If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale the machine only use proprietary non-corrosive de- scaling agents and strictly observe the instructions on the packaging.
Description of the appliance Special program mes – Programme for hand-washable fabrics (Silks / ) Hand-washable fabrics which crease easily but do not contain wool can be washed in the Silks / pro- gramme.
Delay start h/mins Delay start allows you to delay the s tart of a programme from 30 minutes up to a maximum of 24 hours. Time remaining d isplay After the start of a programme, the dur- ation of the programme selected w ill be shown in the display counting down in hours and minutes and finally in minutes.
Control panel b Display see following pages for more infor- mation c Delay start button for delaying the start of a programme d START bu tton starts the wash programme e Addition al optio n butto ns I.
Display The following functions are shown in the d isp lay: – duration (Time remaining d isplay) – delay st art – programmable functions Durat ion of the progr amm e If a programme without delay.
Important contr ol panel featur es Programme selector The programme selector is used to set the basic wash programme and the temperature for that programme. The light ring will go out a few minutes after the end of the programme to save en- ergy. Addition al optio n butto ns Additional options can be added to the basic progr am me.
Before using for the first time Before using the machine for the first time ensure that it is correctly in- stalled and connected. See the rele- vant section under “ Installation ” . Also check that the fluff filter is se- curely tightened. Otherwise there is a risk of water leakage during use.
Washing environmentally and economically – Water consumption and energy usage are determined by the size of the load. Load to the maximum rec- ommended for the programme se- lected. – To save energy wash normally and lightly soiled laundry at lower tem- peratures.
How to wash correctly Before washing 1 Sort th e laundr y Empty all pockets. Foreign objects (e.g. nails, coins, paper clips, etc.) can cause dam- age to garments and components in the machine.
Programme chart COTTONS 9ö876 Fabric Cottons and linen fabrics, e.g. bed linen, table linen, towelling, jeans. underwear, T-shirts, nappies. Additional options Soak, Pre-wash, Short, Water plus Notes – Only use the COTTONS 95 ° C programme for heavily soiled and incontinent laundry.
DELICATES a@ Fabric Acrylics, acetate and triacetate, 100% cotton easy care shirts and blouses. Curtains, specified machine-washable by the manufacturer. Additional options Soak, Pre-wash, Short. Notes – Laundry remains relatively crease-fr ee for easier ironing.
Quick wash 7 Fabric Very lightly soiled fabrics, which can be was hed in the Cottons programme. Additional option Water plus. Notes – Add less detergent (half load). Detergent Powder detergent, detergent for coloured fabrics, liquid detergent. max. load 2.
Selecting a program me 2 Switch on the washing machine Press in the I-ON/0-OFF button. 3 Open th e dru m door Press the Door button and open the drum door. 4 Load the drum Unfold the laundry and load loosely in the drum. To achieve best results it is advisable to make up mixed loads consisting of both large and small items.
Addition al optio ns 8 Select any additional option re- quire d. Press the appropriate additional op- tion button. Soak For heavily soiled and stained items with dried-on stains, or ones which cannot be bleached out, (e.g. blood, fats and oils, cocoa).
9 Add deterg ent It is important to dispense the correct amount, because . . . . . . too little results in the following: – Laundry will not be properly clean and will in time become grey and hard to the touch. – Greasy particles cling to the laundry.
Delay start ! Select delay start if required. Press the Delay start button. Each press on the button increases the de- layed time: – by 30 minutes up to 10 hours, – by 1 hour from 10 hours upwards. To delete delay start Press the Delay start button once when 24 ^ is showing in the display.
At the end of a programme ~ Open th e dru m door Press the Door button. $ Remove the laundry Check the folds in the door seal for any small articles, e.g. buttons which might be lodged there. Check that all the items have been removed. Items left in the drum could discolour other items in the next wash or become discoloured themselves.
Adding or r emoving l aundry after a programme has started Laundry can be added or removed after the programme has started when using the following programmes: – COTTONS – MINIMUM IRON – Quick w ash – Mixed wash – Starch Press the Door button in and hold it until the door springs open.
Interrupting a pr ogramme Switch the washing machine off with the I-ON / 0-OFF button. To continue with the same programme: Switch the washing machine back on again with the I-ON / 0-OFF but- ton.
Program me sequence This washing machine has fully elec- tronic controls with automatic load rec- ognition. The machine determines the amount of water to use depending on the load and the absorbtion rate of the laundry as water is taken in. The pro- gramme sequence and duration will therefore vary with the load.
WOOLLE NS / Main wash Water level: medium Wash rhythm: Woollens Rinses Water level: medium No of rinses: 2 Spinning Rinse and interim spin 2) : yes Final spin: yes Quick wash Main wash Water level: lo.
Detergent All modern detergents produced for automatic washing machines are suit- able, including liquid, compact (con- centrated), tablets and special applica- tion detergents. Use dispensing aids , e.g. balls, if these are supplied with the detergent.
Fabric conditioners and l iquid star ch Fabric conditioners make garments soft and fluffy to handle and help pre- vent static cling when tumble drying. Starch stiffens and gives body to items of laundry, e.g. shirts, tablecloths and bed linen. Dispense according to the amount specified on the packaging.
Locking functions Electronic programm e locking Programme locking prevents the ma- chine from being opened or the pro- gramme cancelled during a wash programme. To activate programme locking After the start of a programme, press the START button for at least 4 sec- onds until the locked check light (lower right on the control panel) comes on.
Electroni c system loc k The system lock prevents your ma- chine being used without your knowl- edge. When the system lock has been acti- vated: – the drum door cannot be opened with the Door button and – a programme cannot be started.
Programmable functions The programmable functions can be used to tailor washing progr ammes to suit your individual requirements. Water plus system ( P2 ) Selecting the Water plus additional option increases the water intake in the programmes listed below.
Follow steps 1 to 7 to prog ramme and store a setting in memory. The programmable functions are acti- vated to call up further features not shown on the control panel by using the additional option buttons in combi- nation with the programme selector.
Gentle acti on ( P9 ) Activating gentle action reduces the drum action. Slightly soiled items are washed more gently. Gentle action can be used with the COTTONS, MINIMUM IRON, Qui ck wash, Starch and Mixed wash pro- grammes.
Top-up rinse for COTTONS ( P10 ) When this is activated, additional water flows into the drum at the end of the main wash and the suds are cooled down. Hot suds can damage plastic drainage pipes. Top-up rinse takes place when tem- peratures of 95 ° C and 75 ° C are se- lected.
Memory Function ( P11 ) If an additional option(s) is selected for a programme, and / or the spin speed is altered, the machine stores these changes in memory at the start of a programme.
Cleaning and care Disconnect the appliance from the mains electricity supply and with- draw the plug from the socket prior to cleaning the machine. Clean the casing with a mild non-ab- rasive detergent or soap and water. Wipe dry with a soft cloth. Clean the fascia panel with a damp cloth and wipe dry with a soft cloth.
Cleaning the detergent dispenser drawer Remo ve de terge nt res idues regu larl y. Pull out the detergent dispenser drawer until a resistance is felt. Press down the release catch and at the same time pull the drawer right out of the machine. Clean the detergent drawer with warm water.
Cleaning and care Cleaning the fluff (drain) filter and pump Check the drain filter initially after 3-4 washes to ascertain how often it is likely to require cleaning. With normal cleaning approx. 2 litres of water run out. If the drain outlet is clogged, more water will be retained in the machine (up to 25 litres) .
Once the flow of water ceases: Remove the fluff filter completely. Clean the fluff filter thoroughly. Remove any foreign objects (e.g. buttons, coins, etc) and fluff. Turn the impeller by hand to check that it is free to rotate. Any foreign object causing an obstruction should be re- remov ed.
Cleaning the filter in the water inlet The washing machine has a filter to pro- tect the water inlet valve. The accessible filter in the union in the open end of the inlet hose should be checked every six months , or more often if there are frequent interruptions to the external water supply.
Problem solving guide With the help of the following notes minor faults in the performance of the ap- pliance, some of which may result from incorrect operation, can be put right with- out contacting the Service Department.
– The wash programme stops and a fault indicator light com es on. Fault indicator Possible cause Remedy 1 The buzzer sounds and the Check d rain light flashes. “– – –” appears in the display. The water outlet is blocked. Clean the fluff (drain) filter and drain pump.
– A fault indicator light comes on but the wash programme continues as normal. Fault indicator Possible cause Remedy 1 The Check dr ain light flashes. The drain outlet is restri cted . Clean the fluff (drain) filter and drain pump. The Check inlet lig ht flashes.
– General pr oblems or an unsatisfactory wash resul t Problem Possible cause Remedy The machine shakes during the spin cycle. The four feet are not resting evenly on the floor. Level the machine. See advice on installation. The laun dry ha s not been spun satisfactorily.
Problem Po ssible cause Remedy The pro gramme selector light ring is not lit up . The machine has switched off the light ring to save energy. To switch the light ring back on again: press one of the additional option buttons or turn the programme selector.
Problem Possible cause Remedy Grey, greasy particles cling to washed laundry. Insufficient amounts of detergent were used to break down the particles of grease in heavily soiled laundry. – Add mor e dete rgent . – Before washing the next load run a COTTONS 95 ° C programme with powder detergent but without a load.
Opening the drum door in the event of a power failure Switch the washing machine off. There is a filter flap opener behind the detergent drawer facia panel. Remove the opener. Use it to open the access flap and drain the water as described in the “ Cleaning the fluff filter and pump ” section of “ Cleaning and care ” .
Customer contac t In the event of any faults which you can- not remedy yourself please contact – Your Miele dealer or – Your nearest Miele Service Depart- ment (see back cover for the ad- dress).
Installation and connection Front view 1 Inlet hose with “ Waterp roof ” system 2 Electricity supply cable 3a - 3c Flexible drain hose (with detachable swivel elbow) 4 Facia panel with controls 5 .
Rear view 1 Protruding lid edge for holding when moving the machine 2 Electricity supply cable 3 Inlet hose with “ Waterp roof ” system 4 Drainage hose 5 Cover with transit bars 6 Restra ining cli.
Installa tion surface A concrete floor is the most suitable in- stallation surface for a washing ma- chine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note the following points: The machine must be level and se- curely positioned.
Turn the left-hand transit bar 90 ° . Withdraw the left-hand transit bar. Turn the right-hand transit bar 90 ° . Withdraw the right-hand transit bar.
Fit the covers on to the two holes. Then plug the holes as shown with the caps. Secure the transit bars to the back of the washing machine. Make sure that holes E are fitted over retainers D . The washing machine must not be moved without the transit bars in place.
Levell ing the machi ne The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase elec- tricity and water consumption and may cause the machine to move about. The four adjustable screw feet are used to level the machine.
Building u nder a continuo us work- top / in a kitchen run – A special building under conversion kit* is required. The machine lid must be replaced by a cover plate.
Connection to the water supply The Waterproof system Funct ion At the heart of this leak protection sys- tem there is an electric safety valve , which works like an automatic stop- cock. The Miele Waterproof system pro- tects from water damage in the follow- ing cases: – Protection in the event of a leaking machine.
The plastic casing of the water connection contains an electric component. The Waterproof system must only be connected to its own stopcock. It must not b e connected to mixer taps or similar and must not be fitted in areas where there is the risk of water or other liquids reaching it.
Maintenance If you intend to unscrew the Waterproof system unit from the mains water sup - ply it is essential that the machine is first disconnected from the electricity supply. Only use a Miele Waterproof system should you ever need a replacement or extension.
Connection to the drainage system The machine drains via a drain pump with a delivery head of 1 metre*. The drain hose is 1.5 m long. It must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull.
Electrical connection U.K. All electrical work should be carried out only by a suitably qualified and compe- tent person, in strict accordance with national and local safety regulations. The appliance is supplied with a mains cable with moulded plug for connection to a 230-240V mains supply.
Non-rewireable plugs BS 1363 If this machine is fitted with a non-re- wireable plug, the following information applies: If the socket outlets are not suitable for the plug supplied with the product, it must be cut off and an appropriate plug fitted. The fuse carrier and fuse should be removed from the old plug and disposed of.
Consumption data Programme (without any additional options or programmable functions) Load Consum ptio n data Energy Water Programme time in kWh in litres normal Short COTTONS 95 ° C 5.0 kg 1.70 49 1 hr 54 mins 1 hr 22 mins 60 ° C 1) 5.0 kg 0.95 49 1 hr 57 mins 1 hr 13 mins 40 ° C 5.
Technical data Height 85 cm Width 59.5 cm Depth 58.0 cm Depth with door open 94.5 cm Weight 94 kg Maximum floor load 1600 Newton (approx. 160 kg) Capacity 5 kg dry laundry Voltage see data plate Rated load see data plate Fuse rating see data plate Consumption data see “ Consumption data ” Water flow pressure min.
66.
67.
Alteration rights reserved/000 0900 This paper consists of cellulose whi ch has been bl eached without the use of chl orine..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Miele W 360 WPS è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Miele W 360 WPS - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Miele W 360 WPS imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Miele W 360 WPS ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Miele W 360 WPS, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Miele W 360 WPS.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Miele W 360 WPS. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Miele W 360 WPS insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
