Manuale d’uso / di manutenzione del prodotto T 699 C del fabbricante Miele
Vai alla pagina of 44
Operating instructions for condenser tumble dryer T 699 C It is essentia l to read these operating instruc tions before Q installing or us ing the machine to avoid the risk of accide nt, or damage to the machine.
Contents Guide to the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Caring for t he environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 W arning and safety instructions .
Cleaning and care Cleani ng the fluf f filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Cleani ng the tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Guide to the appliance General view 1 Supply cable f or electrical connection 2 Condensed w ater contain er 3 Door 4 Control panel 5 Drain ho se for condensed wate r (if fitted) 6 Four height -adjusta.
Control panel b “I-On/0-Of f”button to switch the applian ce on and off. When the ma chine is swi tched on, t he drum light will come on as y ou open the door . c “Door” button to open th e door/cancel a programme. This butto n does not stay pushed in.
Caring fo r the enviro nment Disposal of packing The trans port and protective packin g has been selec ted from materials which are environment ally frien dly for disposal an d can no rmally be recycled. Rather than just throwing th ese ma- terials awa y , please ensu re they are of- fered for recycling.
W ar ning and sa fety instru ctions Please read the operating instruc- tions b efore using the tumble dryer for the first ti me. They contain im- por tant infor mat ion about the saf ety , use and maintenance of the machine. This will av oid the risk of acciden ts and damage to the ma- chine.
For safety reasons, do not use an ex- tension cable. There is a danger of overheating. Faulty compo nents must only be exchanged for Miele o riginal spare parts. Only when these parts are fitted can the saf ety standa rds of the ma- chine be guaranteed.
Using accessori e s Accesso ry part s may o nly be fit ted when expressly approved by Miele. If other par ts are used, guaran- tee, per for mance an d product liability claims may be invalidated. Disposing of your old machine Before discarding an old machine, unplug it a nd render the plug us e- less.
Brief instruc tions Brief description When the ma chine is swi tched on, t he indicator lights fo r all programmes will come on. Programmes are selected by pressing the appropriate button and can be supplemente d by pressing th e additional opt io n buttons.
Notes on laundr y care Before drying, check the drying sym- bol on the textile care label. Significance of symbols: q = Dry at nor mal temperature r = Dry at low temperatu re (also push i n the “Low.
How to dry corr ectly Hints on saving energy Make sur e that your laundry has been thoroughly spun at t he highest appropriate spin speed before dry ing. Spinning a t 1600 rpm, for example, sa ves approxi mately 30% energy and time compared with 800 rpm.
2 Selecting a programme See the “Programme char t” for a de- scription of each programme. COTTONS; MINI MUM IRON; SPE- CIAL CARE Pre ss the touch pad for the req uired programme. The length of the programme is dete r- mined by th e electronics acco rding to each load.
3 Selecting additional options One or more additio nal options can now be switche d on or off. If required, the delay star t option can be selected. See the “Additional options” and “Delay star t” sections for fur ther inf orma tion. 4 Starting a programme Pre ss the “ST ART” touch pad.
Additional o ptions Additional options ca n be switched on or of f by pr essing th e releva nt but- ton before th e start of a progra mme. Indicator lights: – on = additional option switched on – .
Programme chart Programme Fabric type maximum load (2 ) Special notes COTTONS Extra dry Multi-layered fabrics, not thoroughly dried with “Normal + ” 5 kg Do not dry jersey wear in the Extra dry programme – tendency to shrink .
Programme Fabric type Maximum load (2) Special notes MINIMUM IRON Normal+ Minimum iron items which are made of synthetics or blended fabrics, (eg pullovers, dresses , trousers) which are not dried adequately in the “Normal” programme 2.
Display V ari ous pieces o f infor mation are shown in the displa y: - the length of time a programme still has to r un (time le ft); - the length of programme select ed for timed drying; - the number of hou rs selected for t he delay st ar t option ; - pr ogrammable fu nctions as the y are switched on or off.
Delay st art Once a programme has been se- lected, th e star t can be delayed from 30 minut es ( 30 ) up to 2 4 hours ( 24 h). Select a programme. Press the “Delay start” button. Pre ss the > butt on repeatedly until the r equired time appears i n the dis- play: –u p t o i0 h in 30 minute stage s; –f r o m i0 h to 24 h in 1 hour stages.
Altering a programme Once a programme has star ted, no changes to the programme or addi- tiona l options wil l be accept ed. T o cancel a programme Open the door or switch t he machine off. T o select a differe nt pro- gramme T ur n the machin e off and on again.
Electr onic system lock The system lock preve nts anyone from interf ering with the dry er . T o a ctivate the system lock 1 Close the door . 2 T ur n the ma chine on. 3 Press the “Short” bu tton and keep it pressed in while carr ying out steps 4 to 7 .
Programmable functions Notes The programmable functions can be used to c reate drying programmes to suit your individua l requir e ments. They will remain in the machine’ s memory until cancell ed. One or all of the programmable f unc- tions can be activated or ca ncelled.
Activating a nd storing in the memory The programmable function s are acti- vated using the additional option but- tons in spe cial combinations with the programme selector bu ttons to int ro- duce extra featur es not m arked up on the control panel. 1 Switch the machine off and shu t the door .
Cleaning and c are Cleaning the fluff filters The fluff which i s created by the drying process is collected in the fluff filters in the door a nd door openin g. Clean the filters aft er eve ry p ro - gramme to reduce drying time and save energy . Open the door .
Emptying the condensed water container If the h ose drain has not been fitt ed and connect ed, the con densed wate r will be collected in the condens ed water contain er . The condensed water cont ainer should be emptie d after eve ry dry ing cycle, or as s oon as the “Empty out container” indicator light comes on.
Cleaning the condenser unit The machine must be disconn ected from the electricity supply bef ore cleaning. The condens er unit should be clean ed at least fou r times a year . Open the door . T urn the cover lock downwards to the ver tical posit ion.
Pull the condenser un it out. Clean the condenser unit at both ends (front and back). Wipe the r ubber seals at b oth ends gently but thoroughly . Clean th e two long si des of the unit . Stand the c ondenser unit lengthwise on a to wel until it is quite dr y .
Problem solving guide What to do if ... Electrical appliances should only be repaired by qualified personnel. Incorrectly repaired ma- chines may pose a cons iderable risk to the user .
What to do if . . . Cause . . . Remedy . . . . . . the drying process goes on too long. V entilation to and from the dryer is insufficient (eg in a small room). This could cause the room temperature to ri se sharply . Open a door or window while the machine is in operation for increased air flow .
Check and indicator lights and display messa ges: What to do if . . . Cause . . . Remedy . . . . . . the “Locked” indic ator light flashes when the ma- chine is switched on. The system lock is activated. The programme cannot be started. See section “Electronic system lock”.
The interior drum lighting does not come on: changing the bulb Open the door . Before changing the bulb, di scon- nect the machin e from the mains power supply . Unscr ew the plasti c cover abo ve the door inside the drum. Replace the bulb. The light bulb must not exce ed the maximum wattage quoted on the data plat e and the light cove r .
After sales servi ce Repairs In the even t of any fault which you ca n- not remedy yours elf, please contact: – your Miele dealer or – your n earest Miele Se rvice De part - ment (see back cover for the a d- dre ss).
Install ation The machine must be perf ectly leve l to ensure safe and proper operation. Minor differences do not, ho wever , have an adverse ef fect on oper ation. The screw feet can be adjus ted to compensate for an y uneveness in the floor sur face.
Fitting or changing the decor panel Note: The door should be shut for fit- ting or cha nging the decor panel. Remove the 4 screws from the decor strip on th e door catch s ide of the door and r emove the decor strip.
Fitting the plinth facia – The appliance plinth below the door can be concea led using a plinth facia. – The height and retur n of the ap- pliance plinth cannot be a ltered. – A talle r plinth facia can on ly be in- stalled if t he overall niche height is higher .
External condensed water out- let The condensed water can be drained off directly if the machine is installed near a sink, drain outlet etc. Maximum drain hos e length: 3 .
The dr yer is fitted with a non -return valve as standard to prevent water f rom flowing back in to the mach ine. Close the w ater inlet port to the con- densed water container with the bot- tom par t of the rubber plug. The plug must face toward s the inte- rior of the machin e so that the con- densed wa ter container ca n be pushed in e asily .
Electrical conne ction Electrical connection U.K. All electrical work sho uld be carried out only by a suitably c ompetent pers on, in strict acco rdance with national an d local saf ety regulations. The appliance is supplied with a mains cable with moulded plug for con nection to a 230-240V mains supply .
Consumption dat a Programme Cap- acity Final spin speed (in a domestic washing machi ne) Electricity consump- tion Drying time incl. cooling down time Minutes kg rpm kWh 10 A (2) 16 A (2) COTTONS Extra dry 51 2 0 0 1400 1600 3.0 2.9 2.6 95 92 82 77 74 67 Normal + 51 2 0 0 1400 1600 2.
T echnical data Height . . . . . . . . . . . . . . . . . . . . . . . . . . Width . . . . . . . . . . . . . . . . . . . . . . . . . . Depth . . . . . . . . . . . . . . . . . . . . . . . . . . Wei ght . . . . . . . . . . . . . . . . . . . . . . . . . Drum vol ume .
41.
42.
43.
Alteration rights r eserved/002 3198 This paper is made from 100% chlorine free bleached ce llulose and is recyclable..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Miele T 699 C è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Miele T 699 C - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Miele T 699 C imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Miele T 699 C ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Miele T 699 C, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Miele T 699 C.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Miele T 699 C. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Miele T 699 C insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
