Manuale d’uso / di manutenzione del prodotto KWT1601VI del fabbricante Miele
Vai alla pagina of 64
Operating and Installation Instructions Wine Storage Unit KWT 1601 Vi KWT 1611 Vi To prevent accidents and appliance damage read these instructions before installation or use.
IMPORTANT SAFETY INSTRUCTIONS .................................4 Guide to the wine storage unit .......................................7 Before use .......................................................9 Before using for the first time ..............
Installation ......................................................3 5 Installation site ....................................................3 5 Base ............................................................3 6 Furniture/fixtures ..................
When using the appliance, follow basic safety precautions, including the following: Read all instructions before installation and use to prevent accidents and machine damage. This appliance is intended for residential use only. Use only as described in this Operating manual.
Installation This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. Keep the door closed until the appliance is completely installed and secured per installation instructions. ~ This appliance must be installed and connected in compliance with the installation instructions.
Disposal of your old appliance ~ Before disposing of an old appliance, first make the door latch or lock unusable. ~ Take off the door. ~ Leave the shelves in place so that children may not easily climb inside. ~ Consult with your municipal policy on recycling.
a Circulation fans / Active charcoal filter b Wooden racks c Insulation panel to separate the upper and middle temperature zones d Bottle display rack e Control panel / Insulation panel to separate th.
Control panel a Access button b Upper temperature zone c Middle temperature zone d Lower temperature zone e Temperature display: Allows you to set the temperature ( X colder; Y warmer) and set the dur.
Before using for the first time ^ Clean the inside of the appliance and the accessories with a mild solution of warm water and liquid dish soap. Dry with a soft cloth.
Using the settings When a sensor button has been selected with a finger touch, it will appear yellow. A de-selected button will appear white. ^ Touch the access button so it turns yellow. On the control panel you will now see the sensor buttons of the three temperature zones.
^ To de-select a temperature zone touch the sensor button for that particular zone so that it turns white, or select another sensor button. ^ To leave the settings menu, touch the access button " p " so it turns white. The last settings entered are stored.
Turning the button sound On/Off If you prefer the buttons to be silent when touched, the button sound can be turned off. ^ Touch the access button " p "s oi t turns yellow. ^ Touch the sensor button for any temperature zone so it turns yellow.
Turning off for longer periods of time If the appliance is not going to be used for an extended time (for example, during a vacation) some precautions should be taken.
The appliance is equipped with an alarm system, to ensure that the temperature does not rise unnoticed because of energy loss or an open door. The alarm system is always operational, it does not need to be turned on. Temperature alarm If the temperature becomes too warm, an alarm sounds, the "alarm" indicator turns red and flashes.
Wine will continue to mature depending on the surrounding conditions. The length of time which wine can be kept in good condition will therefore depend not only on the temperature but also on the air quality.
Temperatures can be independently set in all three zones. The unit comes factory pre-set for white wine, red wine, and wine storage. If you wish, you can change any or all of these factory settings. ^ Select the temperature zone you would like to change the temperature in.
Temperature display The temperature display on the control panel always shows the desired temperature. The temperature display will flash if the temperature in one of the zones is too warm or too cold. Tap the X and Y sensor buttons to raise/lower the temperature 1°, or hold them down to move through the temperature range more quickly.
Temperature unit (Fahrenheit/Celsius) The temperature can be displayed in degrees Fahrenheit (°F) or Celsius (°C). ^ Touch the access button " p "s oi t turns yellow. ^ Touch the sensor button for any temperature zone, so that it turns yellow.
Humidity In a conventional refrigerator, the humidity levels are too low for storing wines. High humidity levels (60 - 70 %) are very important for the storage of wine, so that the corks remain moist. Under low humidity, the corks dry out from the outside and can no longer seal the bottles properly.
^ While holding down the X button, press the access button " p " once. Keep holding the X button down until the following appears in the display (approx. 5 seconds). ^ Tap the X button until 0 appears in the display. ^ Touch the access button " p "t o confirm.
Storage tips – Always unpack bottles – do not store wine in crates or boxes. – Always lay bottles on their side for storage. This keeps the corks moist from the inside, preventing air from entering. – Store similar wine varieties beside each other on the same shelf, to avoid restacking and the need to disturbed other bottles.
Bottle display rack The display rack, allows you to display selected bottles so they can be seen even with the door closed. ^ Lay the wine bottles in the display rack, so that they touch the wooden guide-rail a . ^ To remove the display rack pull it up and out, then attach it to the rear position on the wooden rack b .
Display lighting The display lighting can be turned on if you wish the bottles to be lit up even when the door is closed. Turning on ^ Touch the access button " p "s oi t turns yellow. ^ Touch the "Display light" sensor button so that it turns yellow.
During normal operation, condensate and frost can form on the rear wall of the refrigerator and drawers. You do not need to remove this build-up, it will defrost and evaporate automatically with the heat generated by the appliance.
To reduce the risk of electrical shock, disconnect the appliance from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before maintenance. Never use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents.
Ventilation slits ^ Check the ventilation slits regularly. Remove any dirt/dust with a vacuum cleaner or brush. Clean as needed. Door seals Do not use any oils or grease on the door seals as these will cause the seals to deteriorate and become porous over time.
Changing the light bulbs Do not remove the light covers for the display lighting. Should the lighting covers be damaged or need to be removed due to damage, do not look directly or with an optical instrument at the lighting. Interior lighting: The lighting automatically switches off after the door has been open for approx.
With the aid of the following guide minor problems can be corrected without a ser - vice call. Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage and may void the warranty.
What if the alarm is ringing? Possible fault Solution The appliance door has been open for longer than 5 minutes. Close the door. What if the alarm is ringing and the "alarm" indicator is lit? The door is not closed. One of these conditions has caused the temperature in the appliance to become too warm.
The appliance is making noises. Issue Possible fault Solution Brrrrr... Humming noise made by the compressor. This noise can get louder for brief periods when the motor is switching on. These noises are not a fault. The noise of the compressor and the coolant circulating in the system is unavoidable.
In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting the Technical Service Department, please quote the model and serial number of your appliance given on the data plate inside the appliance.
32.
Installation instructions To prevent accidents and machine damage read these instructions before installation or use..
Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc.
, In areas with a tropical climate (over 100°F/38°C and more than 70% air humidity) the wine cooler must only be operated in air conditioned locations. Otherwise the function of the machine cannot be guaranteed. Have the appliance installed by a qualified technician, according to the enclosed installation instructions.
Base A fully loaded appliance is very heavy. The load-bearing capacity of your floor must meet the following requirements: KWT 16x1 Vi ........7 0 4l b s (319 kg) To ensure that the appliance is installed securely and functions properly, the base must be flat, level and made of a hard, rigid material.
Installation options There are many different installation options. You are limited only by the design of the kitchen. The door hinge cannot be exchanged. Single column The appliance can be installed at any preferred location in the kitchen. However, be sure the door will open and close properly in the chosen location.
Installation with partition using the "Merging Kit" The minimum thickness of the partition is 5 / 8 " (16 mm). If there is a partition with a thickness from 5 / 8 " (16 mm) to 6 5 .
Power supply 1. Power supply A KWT 16X1 Vi 12" (305 mm) Door dimensions (open min. 90°) A KWT 16X1 Vi 26 5 / 8 " (677 mm) Dimensions 39.
Niche dimensions Dimensions 40.
Dimensions 41.
Before you begin Read these instructions completely and carefully. Have the appliance installed by a qualified technician, according to the enclosed installation instructions. To reduce the risk of injury or damage to the product, two people should be used for installation.
Check the installation niche To ensure a safe, trouble-free installation and the best possible cosmetic result, check to be sure that the installation space complies with the installation requirements. ^ Check the base (see "Installation"). ^ Check the dimensions of the cavity.
^ Loosen the bracket that holds the appliance to the pallet. , Caution! The appliance is no longer secured and may be unstable. ^ From the rear of the appliance carefully lift it from the pallet. Once the appliance is on the ground it can be rolled around.
If the indicator light does not come on, installation of the module was unsuccessful. In that case, repeat the process. If that does not correct the problem, contact Miele. ^ Pull the antenna d straight out. ^ Guide the cover b over the antenna d and screw on the cover.
^ Choose the desired switching contact and connect according to alarm system requirements. Output of the Home Security System on the electronic board: NC: normally closed Com: common NO: normally open Switching capacity: 120 V/250mA 30 V/1A ^ Continue with the appliance installation.
Anti-tip-brackets The anti-tip brackets help keep the appliance safely secured to the installation niche to prevent tipping. Two anti-tip brackets are recommended for each appliance or appliance combination (side-by-side). The distance " D " between the anti-tip brackets b is the width of the appliance.
Securing an alternative anti-tip device If the anti-tip brackets cannot be attached securely, an alternative anti-tip device can be used. Ensure that there is no "give" between the appliance and the anti-tip device. If possible, always screw the wooden beam to existing studs.
Sliding the appliance into the installation niche ^ Unscrew the plinth. ^ To protect the corners of the installation space, attach the supplied edge protector a on both sides with adhesive tape. ^ Plug the appliance into the power outlet b . The plug of the appliance should be easily accessible after installation.
Aligning the appliance ^ Align the appliance with the custom front. The installation aids e have been designed for the following total thickness of custom doors: – 3/4" (19 mm) – 1 1/2" (38 mm). Be sure to take into account the possible differing thicknesses of the custom doors that are to be fitted subsequently.
Note: – Do not twist or jam the appliance inside the niche. When unscrewing the height-adjustable feet, proceed gradually, alternating between left and right. – The adjustment of the rear feet is aided if the appliance is lifted at the rear (tipped forward slightly).
^ If necessary, shorten the filler strip j to the required height. ^ Place the 2 strips on top of each other k . ^ Insert the filler strip until you hear it click into place l .
Preparing the custom door ^ Open the appliance door. ^ Unscrew the installation supports n from the appliance door. ^ Loosen the remaining screws from the strips o on each side of the door, then remove. ^ Set aside the screws and side strips o - you will need them again later.
^ Mark the distance X on the back-side of the custom door. ^ Also calculate and mark the center of the custom door Y . ^ Remove the mounting frame from the appliance door and position it according to the markings on the custom door. ^ Pre-drill the holes.
^ Adjust the custom door to adjacent furniture/fixtures. ^ Align the custom door with the double-threaded bolts. ^ Tighten the nuts on the adjusting rail. This will correct the side alignment of the door. ^ Put the side strips o back into place and screw them completely down on both sides of the appliance door.
^ Insert the cover strip into the space between the appliance and the side panel. For side-by-side combinations, the cover strips (on both sides of the appliance) are applied to the outermost spaces only.
^ Remove the foil from the adhesive strips. ^ Attach a toe-kick cover to the plinth. Attaching the cover strips If the frame width is narrow, the cover strip side piece may need to be shortened. To determine the required length of the side piece, one test piece is enclosed with the cover strip.
Mounting the air separator The air separator keeps the supply and exhaust air separate. This prevents warm exhaust air from flowing into the machine, optimizing the energy performance of the unit. ^ If necessary, shorten the three parts of the air separator.
, Avoid the risk of electrical shock - Plug into a grounded 3-prong outlet. - Do not move the ground plug. - Do not use an adapter. - Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Improper connection of the equipment grounding conductor may result in electric shock.
Miele's RemoteVision Wi-Fi technology creates a 'virtual link' between your appliance and our monitoring center. If a fault occurs, Miele's client service center will be notified and contact you, or another trusted individual identified on your call roster, in order to gain access to your appliance to fix the problem.
Accessing the RemoteVision control panel ^ Touch the access button " p "s oi t turns yellow. ^ Touch the sensor button for any temperature zone so it turns yellow. ^ Note the position of the X button, but do not touch. ^ Touch the access button " p " again so it turns white.
MasterCool control panel options for RemoteVision Status indicators Description of function Flashing ; ~ Module booting phase Flashing ; ‡ Not connected to network Flashing ; | Connection to network.
63.
Alteration rights reserved / 4209 KWT 1601 Vi, KWT 1611 Vi For the most updated manual see the Miele web site. M.-Nr. 07 682 490 / 02 M.-Nr. 07 682 490 / 02.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Miele KWT1601VI è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Miele KWT1601VI - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Miele KWT1601VI imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Miele KWT1601VI ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Miele KWT1601VI, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Miele KWT1601VI.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Miele KWT1601VI. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Miele KWT1601VI insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
