Manuale d’uso / di manutenzione del prodotto H 4681 del fabbricante Miele
Vai alla pagina of 60
Operating and Installation instructions Pyrolytic o v ens SuperVision H 4681 BP KA T T o avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time.
Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Appliance overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Control panel . . .
Pyrolytic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Heating-up phase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Recommended temperatures .
Appliance overvie w a Control panel b Door lock for pyrolytic operation, Door contact switch c Heating element for top heat and grilling with roof liner d Air inlet for fan e Connection socket for the.
Control panel a Sensors for selecting menu options in the display b Context sensitive numerical key pad c ON/OFF s sensor d Display e Minute minder l sensor f + C (Clear) sensor See "Controls" for mor e details.
Features Electronic contr ols In addition to operating the various cooking programmes to bake, r oast and grill the electronic contr ols also offer the following featur es: – Clock display – Minut.
P erfectClean treated surfaces The following surfaces are all treated with PerfectClean enamelling: – Runners – Baking tray – Grill pan – Rack PerfectClean enamelled sur faces have very good anti-stick properties and are much easier to keep clean than conventional enamel, if cleaned regularly .
Baking tray , grill pan and rac k The baking tray , grill pan and rack are fitted with non-tip safety notches which prevent them being pulled right out when they only need to be partially pulled out. When pushing the tray , pan and rack back in, always ensure that the safety notches are at the r ear of the oven (see illustration).
The rotisserie fits into the grill pan for grilling or roasting. The grill pan goes into the first runner level and this automatically engages the rotisserie. The grill motor will then start up and turn the rotisserie. Food is grilled evenly on all sides as it rotates.
Disposal of the packing material The transport and protective packing has been selected from materials which are envir onmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
This appliance complies with all relevant legal safety r equirements. Improper use of the appliance can, however , present a risk of both personal injury and material damage. T o avoid the risk of accidents and damage to the appliance, please read these operating instructions carefully befor e installation and before using it for the first time.
Installation, maintenance and repair work may only be carried out by a suitably qualified and competent person in accordance with national and local safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work.
Use oven gloves when placing food in the oven, turning or removing it. When working with "Conventional" heating or when grilling, the element in the roof of the oven and the r oof liner become very hot, and there is a danger of being burnt. The oven door gets much hotter during pyrolytic operation than during normal use.
If you wish to leave food in the oven after cooking, e.g. to take advantage of the residual heat, do not turn the oven off. Simply select the lowest temperature and leave the function at the position set. Do not switch the appliance off until the food has been removed.
Always ensure that food is sufficiently cooked or r eheated. Many factors will affect the overall cooking time, including the size and amount of food, its temperature, changes to the recipe and the shape and size of cooking container .
Sensors The electronic sensors ar ound the display react to touch. An audible tone will sound each time a sensor is pressed. Y ou can deactivate this, if wished (see "Changing oven settings - Buzzer tones") C These sensors are used to call up options marked with a dot ß in the display .
K Pressing this sensor calls up additional information about the option selected. Select "OK" to close the information screen. When the oven is s witched off the display will either remain dark or show the time of day , if this has been set to appear .
The oven will switch on automatically when it is connected to the electricity supply . A welcome screen will appear in the display and you will then be requested to select some basic settings which are needed to set up the appliance up for using for the first time.
Cleaning and heating up for the first time Before use, please r emove - any stickers from the floor of the oven, baking trays, grill pan etc. - the protective cork discs fr om the sides of the oven. - any protective foil fr om the oven front. See "Cleaning and care" for mor e information.
The minute minder can be used to time any activity in the kitchen, e.g. boiling eggs. Y ou can enter a time up to a maximum of 59 minutes. Y ou can set the minute minder at the same time as another timed programme, e.g. as a r eminder to stir a dish or add seasoning etc.
Y our oven has three heating elements: – The ring heating element is located with the fan behind the back panel. – The bottom heating element is underneath the oven floor . – The top heating or grilling element is below the roof liner . The number of heating elements used will depend on the oven function.
A uto roast In this system, the heat is created by the ring heating element and the fan. The oven heats initially to a high temperature (230 °C) which seals the meat to keep it succulent and tasty . As soon as this temperature has been reached, the oven temperatur e automatically drops back down to the pre-selected setting.
Econom y grill Pre-heat the grill for at least 5 minutes with the oven door closed before grilling. The inner part of the top heating element acts as the grill. This will glow red for a few minutes after being switched on, and it is then ready for use.
Selecting an oven function ^ Switch the oven on. ^ Select the function requir ed. After selecting an oven function, options which can be entered or changed for the cooking process will appear in the display , e.
Changing the heating-up phase The "Heating-up phase" option will appear with the Fan plus, Auto roast and Conventional functions. A rapid heat-up phase is set as stan - dard for these functions.
Entering duration, star t time or finish By entering the duration, start time or finish time, the cooking process can be programmed to switch of f, or on and off automatically . ß Duration Enter the cooking duration you requir e. Once the duration set has elapsed, the oven will switch itself off automatically .
Change function Y ou can change the function selected via this option. The times already enter ed will be kept. Programme sequence, Cooling fan As soon as the settings for a cooking programme have been accepted, – the oven will start heating up, – and the cooling fan will switch on.
T o create a User programme via the "User programme" men u ^ Select the "User programme" menu. ^ Select "Create", then select and confirm the cooking function you want. ^ Alter and confirm the pre-set recommended temperatur e if requir ed.
Y ou can change the standard default settings as follows: ^ Switch the oven on. ^ Call up the "Settings J " menu. ^ Call up the sub-menu you requir e. Currently selected settings ar e indicated by a tick L next to them. If you do not make a selection in the sub-menu within approx.
Light The oven interior lighting can be set so that it goes out 15 seconds after a cooking programme has started, or so that it stays on throughout cooking. If this option has been set, the lighting can be switched back on for a further 15 seconds by pressing one of the sensors next to the display .
Pyrol ytic A message will appear in the display after a certain length of time to remind you to run a pyrolytic cleaning programme. Y ou can disable this message if you do not wish to be reminded.
Activating the system loc k $ ^ Call up the "Safety" sub-menu. ^ Select "System lock $ " and confirm "On". ^ Switch off the oven. Using the system lock: ^ Call up the ) symbol and confirm "on". The $ symbol indicates that the lock has been activated.
In the UK, Miele branded cleaning and conditioning products as well as a microfibr e E-cloth, which is suitable for cleaning surfaces such as stainless steel, glass, plastic and chrome without the use of chemicals, are available fr om the Miele Spare Parts Dept.
Stainless steel fronted appliances Stainless steel surfaces are susceptible to scratches and abrasion. Stainless steel surfaces can be cleaned using a Miele E-Cloth or with a proprietary non-abrasive cleaning agent designed specifically for use on stainless steel.
Accessories Remove all accessories as well as the runners and any extra accessories such as, for example, the baking carriage, or telescopic runners from the oven interior befor e starting the pyrolytic cleaning process.
P erfectClean Before using for the first time r emove any stickers from PerfectClean surfaces. The enamelled surfaces of the baking tray , grill pan, anti-splash tray (if fitted), rack and runners have been treated with a special type of enamelling called "P erfectClean" .
Apply a spray oven cleaner to the soiled areas. Leave to take ef fect for a couple of minutes onl y! If necessary use a soft sponge, soft nylon brush or a scraper suitable for glass surfaces to loosen the soiling. Repeat the process if necessary . After cleaning rinse thoroughly with clean water and then dry thoroughly .
Oven interior The oven interior , back panel and roof liner are coated with dark p yrol ytic enamel which facilitates cleaning. This is a particularly hard enamel with an extremely smooth surface. Because of its anti-stick properties most debris can be easily removed with warm water and a little washing-up liquid applied with a soft cloth.
During the pyrolytic pr ocess the oven is heated to approx. 460 °C . Any r esidual soiling is burnt off by the high temperatures. The pyrolytic pr ogramme duration will vary depending on the level of soiling. For safety reasons the o ven door is automatically loc ked at the beginning of the pyrolytic pr ogramme.
After the pyr olytic pr ocess any debris (e.g, ash), can easily be wiped away . Remember to wait until the oven has cooled down before doing so! Danger of burning. T r y not to wipe the fibre-glass seal when cleaning the oven cavity . It is particularly sensitive and should not be cleaned unless absolutely necessary .
T o remove the o ven door Please note: the oven door is heavy and should be gripped firmly at both sides when being removed or refitted. The oven door is connected to the oven by hinges. Before r emoving the door , the locking clamps on both hinges have to be released.
T o dismantle the oven door In the rare event that condensate has worked its way in between the glass panes, the door can be dismantled in order to clean in between the panes. Do not use scouring agents, hard sponges or brushes or sharp metal tools to clean glass as these can scratch the surface.
^ Then carefully lift the mid dle panes up and out. ^ The individual panes can then be cleaned. Handle them very carefully to avoid the risk of breakage. When putting the door back together again replace the middle panes first. These panes are identical and both have a corner missing.
^ Finally replace the black printed inner pane. The print should face the middle pane. ^ Lift the upper of the two middle panes up a little and refit the spacers to the panes.
^ Open the door fully . ^ Flip both locking clamps back up to lock them. T ur n them as far as they will go into a horizontal position. Make sure that the notches on the locking clamps hook into the slots on the door as illustrated. It is essential that the locking clamps lock securely when the door is re-fitted after cleaning.
Installation, maintenance and repairs may only be carried out by suitably qualified and competent persons in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous, and the manufactur er will not be held liable for unauthorised work.
^ Pull the glass cover out of the rear metal brackets. ^ Pull the defective halogen lamp out. When purchasing a new lamp it is a good idea to take the old one with you to make sure you get the corr ect replacement (12 V , 20 W , heat resistant to 300 °C, G4 fitting, Osram, T ype 64428).
. . . no noise is heard when the o ven door is opened during operation. This is not a fault. If the door is opened during operation, the door contact switch causes the oven heating, and the fan if on "Fan" setting, to be switched off. ...a noise can be heard after baking, roasting or grilling.
...a fault message appears in the display Faults whic h you can rectify y ourself , are indicated by the following message "Please read notes in the operating instruction booklet". Fault 23 The pyrolytic temperatur e of approx. 460 °C was not reached.
In the event of any faults which you cannot remedy yourself, please contact – your Miele Dealer or – the Miele Service Department (see back cover for contact details). When contacting your Dealer or the Service Department, please quote the model and serial number of your appliance.
The following accessories may come are standar d with some models. They following accessories are available at extra cost from your Miele Dealer , the Miele Spare Parts Department or via the Internet (depending on countr y). T elescopic baking carriage The telescopic baking carriage with 4 levels of runners can be drawn right out of the oven.
Baking stone The baking stone is ideal for items which need a well baked base such as pizza, quiche, bread, br ead rolls and savoury snacks. The baking stone is made from heat retaining fir e brick and is glazed.
All electrical work should be undertaken by a suitably qualified and competent person in strict accordance with curr ent national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous.
IRL The v oltage and rated load are given on the data plate, visible when the oven door is open. Please ensure that these match the household mains supply . The appliance is supplied with a 3-core cable for connection to a 230-240 volt 50 Hz supply . The fuse rating is 16 amps for the "B"-model.
All electrical work should be undertaken by a competent person in strict accordance with national and local safety regulations. The voltage and rated load are given on the data plate, visible when the oven door is open. Please ensure that these match the household mains supply .
T o ensure adequate ventilation to the oven once installed: - provide a ventilation cut-out in the housing unit as illustrated. - do not fit a rear panel into the housing unit. - do not fit insulation material inside the housing unit. Important: Remove the protective cork spacers from the sides of the oven befor e installation.
Y ou can sign a maximum of 11 appliances on to the system. These can include: – up to three washing machines, – up to three tumble dryers, – up to two dishwashers, – up to three r efrigeration and/or freezing appliances. If several appliances of the same type are signed on, these will appear with a number beside them in ascending order , e.
Settings Y ou can select and alter the following sub-menus in the "Settings J - Miele { home" menu: The Miele { home option will only appear if your appliance is fitted with Communication module XKM 2000 SV and has been signed on to the Miele | home with SuperVision system.
Prob lem solving guide Prob lem P ossible cause Remedy A communication enabled appliance does not appear in the list of signed on appliances. The appliance has not been signed on.
Alteration rights reserved / 22 / 1607 (H 4681 BP KA T) M.-Nr . 07 088 350 / 00 e n-G B.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Miele H 4681 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Miele H 4681 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Miele H 4681 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Miele H 4681 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Miele H 4681, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Miele H 4681.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Miele H 4681. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Miele H 4681 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
