Manuale d’uso / di manutenzione del prodotto R104-11 del fabbricante METRObility Optical Systems
Vai alla pagina of 16
Installation & User Guide Model: R104-1 1 M ETROBILITY ® F OUR - POR T S WITCH PWR 10/100 BASE LK AT LK AT LK AT LK AT 1 2 3 4.
This publication is protected by the copyright laws of the United States and other countries, with all rights reserved. No part of this publication may be reproduced, stored in a retrieval system, tra.
T able of Contents Metrobility 4-port Switch Installation & User Guide Overview .............................................................................................................. 4 Installation Guide ...................................
4 Overview Overview The Metrobility ® R104-1 1 is a four -port 10/100Mbps TX switch that provides a cost-effective solution for situations in which a simple switching option with few ports is required. When configured for stacking in a Metrobility chassis, the card eliminates the need for any external equipment.
Metrobility 4- port Switch 5 Installation Guide Follow the simple steps outlined in this section to install and start using the R104. NOTE: Electr ostatic dischar ge pr ecautions should be taken when handling any cir cuit boar d. Pr oper gr ounding is r ecommended (i.
6 Installation Guide *DIP switches also can be managed via console commands or with the Metrobility NetBeacon® or WebBeacon™ management software. Refer to the Command Line Interface Reference Guide.
Metrobility 4- port Switch 7 Duplex Switch (FD) Switch FD determines the duplex mode on all ports that have auto- negotiation disabled. • The ports will operate at full duplex if FD is OPEN. (default) • They will operate at half duplex if FD is CLOSED.
8 Installation Guide AN indicates that auto-negotiation is enabled. + indicates the switch is enabled (OPEN) . — indicates the switch is disabled (CLOSED). A blank space indicates that the switch setting is not applicable and can be either OPEN or CLOSED.
Metrobility 4- port Switch 9 • Insert the card into either slot in the R400 or R1000. In the R5000 chassis,any slot excluding slot #17. Make sure the top and bottom edges of the board are aligned with the top and bottom card guides in the chassis. Do not force the card into the chassis unnecessarily .
10 Installation Guide Connect to the Network T o connect the R104 to the network, insert the twisted-pair cables into the appropriate connectors. Be sure the card is secured to the chassis by tightening the thumbscrew before making network connections.
Metrobility 4-port Switch 11 User Guide This section contains information regarding the operating featur es of the Metrobility R104. LED Indicators The R104 provides several LEDs for the visible verification of unit status and proper functionality . These LEDs can assist in troubleshooting and with overall network diagnosis and management.
12 User Guide T echnical Specifications Network Connections T wisted-Pair Interface Connector __________________________________ Shielded RJ-45, 8-pin jack Impedance ________________________________________ 100 Ohms nominal Signal Level Output (differential) ________________ 0.
Metrobility 4-port Switch 13 Product Safety , EMC and Compliance Statements This equipment complies with the following requirements: •U L • CSA •C E •C B • FCC Part 15, Class A • EN55022 C.
14 User Guide W arranty and Servicing T elco Systems’ Pr oduct W arranty TELCO MAKES NO W ARRANTIES EXCEPT AS HEREIN SET FOR TH: T elco warrants that the equipment and accessories manufactured by T .
Metrobility 4-port Switch 15 Replacement, Repair or Refund Procedur e for Hardware: T elco’ s sole obligation under this express warranty shall be, at T elco’ s option and expense, to repair the defective product or part or deliver to Customer an equivalent product or part to replace the defective item.
5660-000023 D 12/06 US Headquarters 2 Hampshire Street Suite 3A Foxboro MA USA 02035 tel: 1.781.551.0300 • fax: 1.781.255.2344 www .telco.com.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il METRObility Optical Systems R104-11 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del METRObility Optical Systems R104-11 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso METRObility Optical Systems R104-11 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul METRObility Optical Systems R104-11 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il METRObility Optical Systems R104-11, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del METRObility Optical Systems R104-11.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il METRObility Optical Systems R104-11. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo METRObility Optical Systems R104-11 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
