Manuale d’uso / di manutenzione del prodotto DILA1080pHD del fabbricante Meridian Audio
Vai alla pagina of 40
Home Theater Optimized DILA1080pHD Installation and Operations Manual NOTICE: THIS PROJECTOR HAS BEEN SIGNIFICANTL Y MODIFIED AND OPTIMIZED TO PRODUCE VER Y HIGH QUALITY IMAGES USING THE F AROUDJA PROCESSOR. ANY CHANGES MADE TO THESE SETTINGS CAN CORRUPT THIS PROCESS.
2 About burning-in of the D-ILA device Do not allow the same still picture to be projected for a long time or an abnormally bright video picture to be projected. Do not project video images with high-intensity or high con- trast on a screen. The video image could be burnt into the D-ILA device.
3 – Slots and openings in the cabinet are provided for ventila- tion. These ensure reliable operation of the product and pro- tect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by plac- ing the product on bed, sofa, rug, or similar surface.
4 W ARNING: THIS APP ARA TUS MUST BE EAR THED. IMPORT ANT : The wires in the mains lead on this product are colored in accordance with the following cord: Green-and-yellow : Earth Blue : Neutral Brown.
5 Maintenance Procedures ● Clean dirt on the cabinet with a soft cloth. In case of heavy soiling, soak a cloth in neutral detergent diluted with water, wring dry and wipe, followed by wiping again using a dry cloth. ● Pay attention to the following as the cabinet may deteriorate in condition, get damaged or paint may come off.
6 The following accessories are packed together with this unit. Please confirm all items. If any item is missing, please contact your dealer. Contents Instructions .......................................................................................
7 6 Remote Sensor (Front) When operating with the remote control, aim it towards this sensor. ( ☞ Page 17) •A remote sensor is also located on the rear of the unit. 7 Focus Ring Turn manually to focus the projected image. ( ☞ Page 20) Remove metal cover to access lens.
8 1 Connection Panel Access panel by removing four screws and removing side panel. 2 Lamp Cover Remove this cover when replacing the lamp. See manual insert for details on accessing bulb. 3 Exhaust Vent Warm air is expelled through this vent to keep the system cool.
9 1 [SYNC OUT] Terminal This terminal is intended for servicing purposes. Do not use it. Using it may give rise to error or malfunction of the unit. 2 [SERVICE] Terminal This terminal is intended for servicing purposes. Do not use it. Using it may give rise to error and malfunction of the unit.
10 7 [OPERATE] Indicator Light on : When this unit is in operation (during projec- tion). ( ☞ Page 20) 8 [OPERATE] Button When this unit is in the standby mode, pressing this button for more than 1 second will turn this unit on and cause the [OPERATE] indicator to light up.
11 Indicator Display on the Control Panel L AMP TEMP ST AND B Y OPERA TE L AMP TEMP ST AND B Y OPERA TE L AMP TEMP ST AND B Y OPERA TE LAMP TEMP ST AND B Y OPERA TE LAMP TEMP ST AND B Y OPERA TE LAMP .
12 1 Remote Control’s Signal Transmitter ( ☞ Page 17) 2 [OPERATE ON] Button When this unit is in the standby mode, pressing the button for more than 1 second will turn this unit on and cause the [OPERATE] indicator to light up. ( ☞ Page 20) 3 [LIGHT] Button Lights up illumination (light) of the remote control buttons for about 10 seconds.
13 Precautions for Using Batteries Loading Batteries into the Remote Control 1 Open the back cover Press the back cover slightly and slide it in the direction of the arrow. 2 Load the batteries Insert the 2 (AAA) batteries supplied according to the , 뵂 marks.
14 Installing the Projector Precautions for Installation Please read the following carefully when installing this unit. Minimum Space Required Adjusting the Inclination Vertical angle adjustment range Adjusting the vertical angle While pushing the foot lever upward, raise this unit to extend the front foot (maximum extension is about 31 mm).
15 Projector and Screen Installation When viewed from the left (or right) When viewed from the top (or bottom) The optimum image can be obtained when the center of this unit lens and the screen are placed perpendicular to each other. Take note of the projection angle when placing them.
16 Projection Screen Size (Diagonal Length) of Aspect Ratio 16:9 40" (Approx. 101.6 cm) 50" (Approx. 127.0 cm) 60" (Approx. 152.4 cm) 70" (Approx. 177.8 cm) 80" (Approx. 203.2 cm) 90" (Approx. 228.6 cm) 100" (Approx.
17 Effective Range of Remote Control Unit The operable distance of the remote control unit is about 7 m for direct reception. The remote control unit can be used by having the transmission signal reflected off a screen. ● If the fluorescent lamp is lit, the remote control unit might not function properly.
18 Connecting to Various Devices Connecting to Devices Before connection, be sure to turn off both the projector and the device to be connected. Connecting to digital video processors ● Read the manual that is supplied with the digital video processor thoroughly.
19 2 1 1 Connect the supplied power cord to the power in- put terminal of this unit 2 Insert the main plug of the supplied power cord into the wall outlet Connecting the Power Cord (supplied) After all devices have been connected, connect the supplied power cord.
20 LAMP TEMP ST AND BY OPERA TE ON ENTER OFF FOCUS TEST MENU EXIT PRESET HIDE LIGHT OPERA TE 1 - 2 LAMP TEMP ST AND BY OPERA TE 2 3 If setting for this unit is not completed, please refer to “Adjustments and Settings Using Menus”( ☞ Page 22) upon turning on the power and perform the required setting accordingly.
21 ON ENTER OFF FOCUS TEST MENU EXIT PRESET HIDE LIGHT OPERA TE 5 - 1 4 LAMP TEMP ST AND BY OPERA TE 4 Hiding the image temporarily Press [HIDE] ● The displayed image will disappear.
22 Image adjust Set up Options Information GREEN BLUE RED Gamma NORMAL NORMAL A CUST CUST OM OM B Color temp. T est pattern USER2 USER2 USER1 USER1 D65 D65 ENTER Image adjust Options Information Men Men u P u P osition osition Mask Off Off 5% 5% 2.5% 2.
23 ON ENTER OFF FOCUS TEST MENU EXIT PRESET HIDE LIGHT OPERA TE LAMP TEMP ST AND BY OPERA TE PRESET MENU EXIT ENTER HIDE M ENU MENU ENTER ENTER EXIT EXIT ENTER ENTER Menu Operation Buttons The menus are operated using buttons on this unit or remote control unit.
24 LAMP TEMP ST AND BY OPERA TE MENU EXIT ENTER 4 4 ON ENTER OFF FOCUS TEST MENU EXIT PRESET HIDE LIGHT OPERA TE 1, 6 1, 6 2, 3 2, 3 1 Press the [MENU] button ● The main menu is displayed on the screen. 2 Press [ /] to select a main menu item and [ENTER] to confirm ● The “Information” menu does not have a setting menu (submenu).
25 Item values shown in { } are factory settings. 1 “Image adjust” Menu To adjust images. On the “Image adjust” menu, you can adjust the following items. “Gamma” Switches the gradation characteristics of the image. Select your preference setting values according to the image to be viewed.
26 PRESET MENU EXIT ENTER HIDE ON ENTER OFF FOCUS TEST MENU EXIT PRESET HIDE LIGHT OPERA TE 2, 5 2, 5 3, 4 3, 4 Screen Masking Images for which quality at the outer area has deteriorated can be projected by masking (hiding) the outer area of the projected image.
27 PRESET MENU EXIT ENTER HIDE ON ENTER OFF FOCUS TEST MENU EXIT PRESET HIDE LIGHT OPERA TE 2, 5 2, 5 3, 4 3, 4 Image adjust Set up Options Information GREEN BLUE RED Color temp.
28 Light-source Lamp and Lamp Usage Time The light-source lamp has a service life. The life of lamps used for this unit is about 2000 hours. ● The lamp life of 2000 hours is merely the average life span of lamps and we do not provide any guarantee for this figure.
29 Handle Lamp Unit 2 Loosen the screws on the lamp unit and lift up the handle ● Loosen the 2 screws with a screwdriver. 3 Pull out the lamp unit 4 Insert the new lamp unit until it is fully in 5 Tighten the screws of the lamp unit and close the handle ● Fasten the 2 screws with a screwdriver.
30 EXIT PRESET HIDE Resetting Lamp Time After installing a new lamp (lamp unit), reset the lamp time. The lamp time counter will be reset and a new count will start. If display of the accumulated lamp time has reached 2000 hours, this unit will not work (lamp does not light up) unless the lamp time is reset.
31 1 Pull out the plug from the power outlet ● Pull out the power plug from the outlet while the [STAND BY] indicator is still on. 2 Remove the lower filter ● Withdraw the filter backwards along the rail in the direc- tion of the arrow.
32 Lamp replacement EXIT Warning Lamp replacement EXIT EXIT 1000h No Signal D VI-D Cause (Details) No device is connected to the DVI terminal. The terminal is connected but there is no signal output. [ Input the video signals. When lamp time reaches 1000 hours [ A message indicating “1000 h” will be displayed on the screen.
33 About warning indicators If abnormality occurs in this unit during projection, the warning mode will be triggered and the type of abnormality will be indicated by a combination of indicators displayed on the control panel. This unit will then automatically stop projection and run the cooling fan for about 90 seconds.
34 ● This unit uses a microcomputer. External noise may cause it to malfunction. If this happens, turn off the power and remove the plug from the power outlet. Insert plug again into the outlet and check operation of the unit. (See Pages 20, 21 on how to turn on/off the power of the unit.
35 9 8 7 6 54321 8 16 24 7 15 23 6 14 22 3 11 19 2 10 18 5 13 21 4 12 20 1 9 17 Pin Arrangement TMDS = Transition Minimized Differential Signaling DDC = Display Data Channel Terminal Description Pin No. 1 2 3 4 5 Signal Name N/C RD TD N/C GND Pin No. 6 7 8 9 Signal Name N/C N/C N/C N/C Pin No.
36 [ [ [ [ Control of this unit via a computer is possible by connecting the computer to this unit with a RS-232C cross cable (D-sub 9 pins). The commands to control this unit and the response data format against the received commands are explained here.
37 3 Special parameters Parameters for input video image format Operation mode parameters 3. External control command table Operation mode: Only Asking command is possible Character 0000 0001 0002 000.
38 DILA1080pHD Home Theater Projector D-ILA* 1 (Reflective Active Matrix Principle) D-ILA Device* 2 /0.82" (1920 pixels x 1080 pixels) x 3 (Total no. of pixels: Approx. 6,220,000) x 1.3 zoom lens (1.8:1 to 2.35:1) (Zoom/Focus adjustment: manual) 250 W Ultra-high Pressure Mercury Lamp [Part No.
39 181 20 67.5 38.2 298 300 292 63.5 421 148 160 413 Dimensions (Unit: mm) Top Front Side Bottom M6 (Depth: 10 mm) Mounting screw should be more than 6 mm but less than 10 mm in length.
F AROUDJA W ARRANTY ST A TEMENT Fa r oudja ® , a division of Genesis Microchip Inc. warranties that its pr oducts will substantially conform to published specifications, subject to the terms and conditions below .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Meridian Audio DILA1080pHD è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Meridian Audio DILA1080pHD - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Meridian Audio DILA1080pHD imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Meridian Audio DILA1080pHD ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Meridian Audio DILA1080pHD, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Meridian Audio DILA1080pHD.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Meridian Audio DILA1080pHD. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Meridian Audio DILA1080pHD insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
