Manuale d’uso / di manutenzione del prodotto 2010 E350 Sedan del fabbricante Mercedes-Benz
Vai alla pagina of 372
E-Class Sedan Operator’s Manual 212_AKB; 2; 41, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T09:14:21+02:00 - Seite 1.
Symbols Trademarks: R BabySmart TM is a trademark of Siemens Automotive Corp. R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R HomeLink ® is a registered trademark of Prince, a Johnson Controls Company. R PRE-SAFE ® is a registered trademark of Daimler.
Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and will provide years of service.
212_AKB; 2; 41, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T09:14:21+02:00 - Seite 2.
Index ....................................................... 4 Introduction ......................................... 20 At a glance ........................................... 25 Safety and security ............................. 35 Controls in detail .
1, 2, 3 ... 4-ETS see ETS/4-ETS 4MATIC see All-wheel drive (4MATIC) A ABS (Antilock Brake System) ............. 62 Indicator lamp ................................ 305 Messages in the multifunction display ................................... 288, 289 Accessory weight .
ATTENTION ASSIST ........................... 178 Messages in the multifunction display ........................................... 292 Switching on or off ......................... 138 Audio menu ........................................ 134 Auto-dimming rear view mirrors .
C CAC (Customer Assistance Center) ... 23 California retail buyers and lessees, important notice for ............. 21 Calls (phone) ...................................... 135 Can holders see Cup holders Capacities and recommended fuel/lubricants .....
Messages in the multifunction display ........................................... 295 Temperature gauge ........................ 125 Warning lamp ................................. 311 Corner-illuminating lamps ................ 102 Replacing bulbs ....
RACE START (E 63 AMG) ............... 159 Safety systems ................................ 61 Systems ......................................... 146 Through standing water ................. 257 With DISTRONIC PLUS ................... 157 Driving and parking Safety notes .
ESC (Electronic Stability Control) ...... 65 ETS/4-ETS ....................................... 65 Messages in the multifunction display ........................... 288, 289, 290 Warning lamp ................................. 309 ETD (Emergency Tensioning Device) .
Generator see Al ternato r Global locking/unlocking see Key, SmartKey Glove box ........................................... 201 Gross Axle Weight Rating see GAW R Gross Vehicle Weight see GVW Gross Vehicle Weight Rating see GVW R GVW (Gross Vehicle Weight) .
Rear ............................................... 104 Rear reading lamps ........................ 104 Interior rear view mirror ..................... 94 Auto-dimming rear view mirrors ....... 95 Interior storage spaces see Storage compartments Intermittent wiping .
SRS .......................................... 36, 308 Turn signals ..................................... 29 Lane Keeping Assist .......................... 177 Messages in the multifunction display ........................................... 283 Switching on or off .
Brake pads ..................................... 287 Child seat ...................................... 279 Coolant .......................................... 295 Corner-illuminating lamps .............. 303 Cruise control .............................
Oil, oil level see Engine oil On-board computer see Con trol syst em One-touch gearshifting ..................... 121 Operating safety .................................. 22 Ornamental moldings, cleaning ....... 262 Overhead control panel .............
Program mode selector dial (E 63 AMG) Automatic shift program ........ 121, 123 Program mode selector switch Automatic shift program ................ 120 Proximity key see Key, SmartKey PSI (air pressure unit) ....................... 251 R RACE START (E 63 AMG) .
Safety notes ..................................... 48 Telltale ............................... 29, 52, 307 Seat heating ......................................... 92 Seating capacity ................................ 238 Seats ..........................
T Tachometer .................................. 28, 126 Overspeed range ........................... 126 Tail lamps Cleaning lenses ............................. 262 Tar stains ........................................... 261 Technical data Air conditioning refrigerant .
Air pressure ................................... 229 Care and maintenance ................... 242 Cleaning ......................................... 243 Direction of rotation, spinning ....... 241 Important notes on tire inflation pressure ...........
V Valet locking ........................................ 85 Vehicle Battery ........................................... 336 Care ............................................... 260 Control system .............................. 126 Identification Number (VIN) .
Product Information Please observe the following in your own best interest: We recommend using Genuine Mercedes- Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.
Rhode Island, and Vermont Emission Control System Warranty R State Warranty Enforcement Laws (Lemon Laws) Important notice for California retail buyers and lessees of Mercedes-Benz automobiles Under C.
contacting you in a timely manner should the need arise. If you sell your Mercedes, please leave all literature with the vehicle to make it available to the next operator.
Proper use of the vehicle Proper use of the vehicle requires that you are familiar with the following information and rules: R the safety precautions in this manual R the “Technical data” section .
This information helps, for example, to diagnose vehicle systems after a collision and to continuously improve vehicle safety. Daimler may access the information and share it with others R for safety .
Exterior view ....................................... 26 Cockpit ................................................. 27 Instrument cluster .............................. 28 Multifunction steering wheel ............. 30 Center console ...................
Exterior view i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Cockpit Function Page : Steering wheel gearshift control 121 ; Cruise control lever: Cruise control 146 DISTRONIC PLUS 149 = Instrument cluster 125 ? Multifunction steering wheel 126 A Horn B Gear sel.
Instrument cluster i Please refer to the overview of the indicator and warning lamps ( Y page 29). Function Page : Fuel gauge 126 ; Speedometer = Cruise control speed segments 146 DISTRONIC PLUS segme.
Indicator and warning lamps Function Page : ESC OFF warning lamp 308 ; Preglow indicator lamp, diesel engine only 110 = Front foglamp indicator lamp 99 ? Rear foglamp indicator lamp 99 A Left turn sig.
Function Page N Low-beam headlamp indicator lamp 97 O ESC SPORT warning lamp 67 P Fuel tank reserve warning lamp 310 Multifunction steering wheel Function Page : Multifunction display 128 ; Press button W or X to set the volume.
Function Page ? Press button % briefly: to go to the next higher menu level 128 to confirm display message 128 to cancel the Voice Control System 3 Press and hold button % to select the standard display.
Center console Function Page : Hazard warning flasher switch 101 ; Alarm system indicator lamp 72 = Front passenger front air bag off indicator lamp, USA only 43, 314 Front passenger front air bag off.
Overhead control panel Function Page : Rear interior lighting on/off 103 ; Automatic interior lighting control 103 = Right reading lamp on/off 103 ? Roof panel switch 192, 195 A Information button (Te.
Door control panel Function Page : Memory function (for storing seat, exterior mirror and steering wheel settings) 96 ; Seat adjustment switches 88 = Central locking/unlocking switch 81 ? Inside door .
Vehicle equipment .............................. 36 Occupant safety .................................. 36 Panic alarm .......................................... 61 Driving safety systems ....................... 61 Anti-theft systems ..................
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
G Warning! The SRS self-check has detected a malfunction when the SRS indicator lamp 6 R does not come on at all R fails to go out after approximately 4 seconds after the engine was started R comes on.
adjusting the seat and steering wheel. If you have any difficulties, please contact an authorized Mercedes-Benz Center. R Do not lean your head or chest close to the steering wheel or dashboard.
whether or not your vehicle is equipped with air bags. It is important to your safety and that of your passengers to have deployed air bags replaced and to have any malfunctioning air bags repaired. This will help to make sure the air bags will continue to provide supplemental crash protection for occupants.
abrasions or other, potentially more serious injuries resulting from air bag deployment. If you sell your vehicle, we strongly recommend that you inform the subsequent owner that the vehicle is equipped with SRS. Also refer them to the applicable section in the Operator’s Manual.
operate together with the driver front air bag in certain frontal impacts if the system determines that air bag deployment can offer additional protection to that provided by the seat belt. Knee bag = operates best in conjunction with a properly positioned and fastened seat belt.
Pelvis air bags G Observe Safety notes, see page 37. Pelvis air bags : are designed to provide increased protection for the pelvis. Pelvis air bags : are deployed R in instances with a high rate of la.
Occupant Classification System The Occupant Classification System (OCS) is standard equipment in USA. The OCS activates or deactivates the front passenger front air bag automatically. The respective status is based on the classified occupant weight category determined by weight sensor readings from the front passenger seat.
indicating that the front passenger front air bag is activated. If the 45 indicator lamp is illuminated, the front passenger front air bag is deactivated and will not be deployed.
A child in a rear-facing child restraint on the front passenger seat will be seriously injured or even killed if the front passenger front air bag inflates.
OCS Self-test After turning the SmartKey in the starter switch to position 1 or 2 or pressing the KEYLESS-GO start/stop button once or twice, the 45 indicator lamp illuminates.
completely eliminate this risk is to never place a child in a rear-facing child restraint in the front seat. We therefore strongly recommend that you always place a child in a rear-facing child restraint in a backseat.
If the 45 indicator lamp should not come on or is continuously lit, the system is not functioning. You must see an authorized Mercedes-Benz Center before seating any child on the front passenger seat. More information can be found in the “Practical hints” section ( Y page 313).
seat belt provide the best restraint when the wearer is in a position that is as upright as possible and the seat belt is properly positioned on the body. G Warning! Never let more people ride in the vehicle than there are seat belts available. Make sure everyone riding in the vehicle is correctly restrained with a separate seat belt.
R Never use a seat belt for more than one person at a time. Do not fasten a seat belt around a person and another person or other objects at the same time. R Seat belts should not be worn twisted. In a crash, you would not have the full width of the seat belt to distribute impact forces.
X With a smooth motion, pull the seat belt out of seat belt outlet : . X Place the shoulder portion of the seat belt across the top of your shoulder and the lap portion across your hips.
X Raising: Slide the seat belt outlet height adjuster upward. The seat belt outlet height adjuster engages in different positions. X Lowering: Press and hold release button : . X Slide the seat belt outlet height adjuster downward. X Release release button : and make sure the seat belt outlet height adjuster engages into place.
The ETDs for the rear outer seats will activate with or without the respective seat belts fastened. In an impact, the ETDs remove slack from the seat belts in such a way that the seat belts fit more snugly against the body.
tension and decreases the air pressure in the air pockets of the drive-dynamic multicontour front seats. All of the PRE-SAFE ® system settings can be re-adjusted following the critical driving event. If the seat belts do not release: X Adjust the seat backrest or seat slightly to the rear until the seat belt tension is reduced.
R steering wheel adjustment R rear view mirror adjustment R fastening of seat belts Steering wheel G Observe Safety notes, see page 93. X Position steering wheel : properly ( Y page 93). Make sure: R You can reach the steering wheel with your arms slightly bent at the elbows.
Children in the vehicle Safety notes If an infant or child is traveling with you in the vehicle: X Secure the child using an infant or child restraint appropriate to the age and size of the child. X Make sure the infant or child is properly secured at all times while the vehicle is in motion.
G Warning! Never release the seat belt buckle while the vehicle is in motion, since the special seat belt retractor will be deactivated. i Information on child seats with mounting fittings for tether anchorages ( Y page 58). For information on LATCH-type (ISOFIX) child seat anchors ( Y page 59).
R A child in a rear-facing child restraint on the front passenger seat will be seriously injured or even killed if the front passenger front air bag inflates in a collision which could occur under some circumstances, even with the air bag technology installed in your vehicle.
X Move the respective head restraint : to its uppermost position ( Y page 90). X Lift up anchorage ring cover ; from anchorage ring = . X Guide top tether strap A between head restraint : and top of the seat backrest. X Securely fasten hook ? , which is part of top tether strap A , to anchorage ring = .
The LATCH-type (ISOFIX) anchors are blended with covers. Information sign : on the cover indicates the position of anchor ; . X Install a LATCH-type (ISOFIX) child seat according to the manufacturer’s instructions. The anchorage ring covers of anchors ; swings back with insert the mounting fittings of a LATCH-type (ISOFIX) child seat.
The rear door windows can no longer be operated using the respective switch located in the rear doors. You can still operate the rear door windows using the switches located on the door control panel of the driver’s door. X Deactivating: Press override switch : again.
i In winter operation, the maximum effectiveness of most of the driving systems described in this section is only achieved with winter tires, or snow chains as required.
G Warning! If the ABS malfunctions, other driving safety systems such as the BAS or the ESC are also switched off. Observe indicator and warning lamps that may come on as well as messages in the multifunction display that may appear.
boost to a level that is suitable for the traffic situation. If BAS PLUS requires a particularly high brake power boost, PRE-SAFE ® is activated at the same time. X Keep constant pressure on the brake pedal until the emergency braking situation is over.
ESC G Observe Safety notes, see page 62. The Electronic Stability Control (ESC) is operational as soon as the engine is running. It monitors the vehicle’s traction (force of adhesive friction between the tires and the road surface) and handling. The ESC recognizes that the vehicle deviates from the direction of travel as intended by the driver.
Switching the ESC off or on (except E 63 AMG) G Warning! The ESC should not be switched off during normal driving other than in the circumstances described below. Disabling the system will reduce vehicle stability in driving maneuvers. Do not switch off the ESC when a spare wheel is mounted.
E 63 AMG Switching ESC SPORT on or off G Warning! ESC SPORT should not be switched on during normal driving. Switching ESC SPORT on will result in the following: R no restriction to engine torque R sy.
ESC SPORT switches off automatically when you turn off the engine. When starting the engine, the ESC is activated automatically. Switching the ESC off or on G Warning! The ESC should not be switched off during normal driving.
G Warning! When the ESC OFF warning lamp å is on, the ESC is switched off. When the ESC warning lamp ä and the ESC OFF warning lamp å are on continuously, the ESC is not operational due to a malfunction. When the ESC is switched off or not operational, vehicle stability in standard driving maneuvers is reduced.
i USA only: This device has been approved by the FCC as a “Vehicular Radar System”. The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC.
To maintain the proper distance to the vehicle in front of you and thus prevent a rear-end collision, you must apply the brakes yourself. X Brake the vehicle immediately to avoid a collision. Under no circumstances should the driver await the intermittent warning sound before braking.
Activating X With SmartKey: Remove the SmartKey from the starter switch. X With KEYLESS-GO: Turn off the engine and open the driver’s door. Deactivating X Switch on the ignition.
i Unless you open a door or the trunk within approximately 40 seconds after unlocking the vehicle: R The vehicle will be locked again. R The anti-theft alarm system will be rearmed. Canceling the alarm To cancel the alarm, do one of the following: X Insert the SmartKey into the starter switch.
74 212_AKB; 2; 41, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T09:14:21+02:00 - Seite 74.
Vehicle equipment .............................. 76 Locking and unlocking ....................... 76 Starter switch positions ..................... 85 Seats .................................................... 87 Multifunction steering wheel .........
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Any unauthorized modification to this device could void the user’s authority to operate the equipment. i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2.
i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device.
Possibility 2 (One SmartKey in the vehicle, no SmartKey outside the vehicle): When exiting and trying to lock the vehicle, the message Key Detected in Vehicle appears in the multifunction display. The vehicle will not be locked. Factory setting X Global unlocking: Grasp an outside door handle.
X Have the SmartKey deactivated by an authorized Mercedes-Benz Center. X Report the loss of the SmartKey or the mechanical key to your car insurance company immediately. X Have the mechanical lock replaced if necessary. Any authorized Mercedes-Benz Center will be glad to supply you with a replacement.
out when the vehicle is pushed or towed or is on a test stand. X Switching off: Press and hold central unlocking switch : until an acoustic signal sounds.
You can open the trunk when the vehicle is stationary. A minimum height clearance of 5.78 ft (1.76 m) is required to open the trunk lid. Opening the trunk from the outside X Press and hold button F ( Y page 76) on the SmartKey until the trunk unlocks and begins to open.
Closing the trunk from the inside automatically G Warning! Maintain sight of the area around the rear of the vehicle while operating the trunk lid with the door mounted switch. Monitor the closing procedure carefully to make sure no one is in danger of being injured.
Example: Vehicles with KEYLESS-GO X Press trunk closing switch : briefly. If the trunk lid comes into contact with an object while closing, the closing procedure is stopped and the trunk lid reopens slightly. This will happen only while the trunk is in its upper motion sequence.
The emergency release button does not open the trunk, if the vehicle battery is discharged or disconnected. Valet locking You can lock the trunk separately with the mechanical key. This denies unauthorized access to the trunk, e.g. when you valet park the vehicle.
X Always remove the SmartKey from the starter switch when the engine is not in operation. This will help to prevent accelerated vehicle battery discharge or a completely discharged vehicle battery. If the SmartKey cannot be turned in the starter switch, the vehicle battery may not be sufficiently charged.
Position 0 Before you press the KEYLESS-GO start/stop button, the vehicle’s on-board electronics have status 0 (as with SmartKey removed). Position 1 X Press the KEYLESS-GO start/stop button once. This supplies power for some electrical consumers, e.
R Adjust the head restraint so that it is as close to the head as possible. The center of the head restraint must support the back of the head at eye level. R Never place hands under the seat or near any moving parts while a seat is being adjusted. Failure to do so could result in an accident and/or serious personal injury.
X Seat cushion tilt: Press the switch up or down in direction of arrow ; until your upper legs are lightly supported. X Head restraint height: Press the switch up or down in direction of arrow : . Head restraint fore and aft adjustment X Push or pull on the lower edge of the head restraint cushion to the desired position.
lowest non-use position and have the occupant adjust the head restraint properly. Do not drive the vehicle without the seat head restraints installed when the rear seats are occupied. Head restraints are intended to help reduce injuries during an accident.
X Removing: Unlock the rear seat backrest ( Y page 199) and fold it slightly forward. X Pull head restraint to its highest position. X Press release button : and pull out head restraint. X Installing: Position the head restraints so that the notches on the rod are on the left when looking in the direction of travel.
X Switching on: Press button ? repeatedly until the desired level is set. One or two indicator lamps in the button come on. The air cushions in the lumbar region inflate and deflate rhythmically for approximately 20 minutes.
Multifunction steering wheel Safety notes G Warning! Do not adjust the steering wheel while driving. Adjusting the steering wheel while driving could cause the driver to lose control of the vehicle. The electrical steering wheel adjustment feature can be operated at any time.
in starter switch position 0 or 1 or the KEYLESS-GO start/stop button in position 1 . i When the current position for the steering wheel is in the uppermost tilt position, the steering wheel will no longer be able to move upward when the easy-entry/exit feature is activated.
Exterior rear view mirrors G Warning! Exercise care when using the passenger-side exterior rear view mirror. The mirror surface is convex (outwardly curved surface for a wider field of view). Objects in mirror are closer than they appear. Check your interior rear view mirror and glance over your shoulder before changing lanes.
X Switch on the ignition. X Press button ; , to select the passenger- side exterior rear view mirror. X Shift the automatic transmission into reverse gear R .
Storing positions into memory X Adjust the seats. X On the driver’s side, also adjust the steering wheel and exterior rear view mirrors to the desired positions. X Press memory button M once and within 3 seconds press memory position button 1 , 2 or 3 .
the driver’s door with the ignition switched off. When the parking lamps or the rear fog lamp are switched on and you remove the SmartKey from the starter switch and open the driver’s door, an acoustic signal sounds. In addition the message Switch Off Lights appears in the multifunction display.
X Activate the daytime running lamp mode using the control system, see “Switching daytime running lamp mode on or off (USA only)” ( Y page 141). X Turn the exterior lamp switch to position c . When the engine is running and the ambient light is bright, the daytime running lamps come on.
X Switching on rear fog lamp: Press switch N ( Y page 97). The rear fog lamp, the front fog lamps, the green N and the yellow indicator lamp R in the instrument cluster come on.
G Warning! The Adaptive Highbeam Assist is only an aid intended to support you while driving. The driver is and remains responsible for proper vehicle lighting in accordance with the prevailing light, sight and traffic conditions. The system may be impaired or unavailable when R visibility is poor, e.
X Switching on: Press hazard warning flasher switch : . All turn signal lamps are flashing. i With the hazard warning flasher activated and the combination switch set for either left or right turn, only the respective left or right turn signals will operate when the ignition is switched on.
then again in the other direction shortly thereafter. The corner-illuminating lamp remains lit for a short time only. It then goes out automatically. Switching off X Switch off the left or right turn signal. or X Steer straight ahead. The corner-illuminating lamp goes out.
Interior lighting in the rear ! An interior lamp switched on manually does not go out automatically. Leaving an interior lamp switched on for an extended period of time with the engine turned off could result in a discharged battery.
! If you have set intermittent wiping, dirt on the surface of the rain sensor or optical effects may cause the windshield wipers to wipe in an undesired fashion. This could then damage the windshield wiper blades or scratch the windshield. You should therefore switch off the windshield wipers when weather conditions are dry.
The switches for the respective door windows are located on the front passenger door and on the rear doors. i Operating the rear door windows from the rear is not possible when you activate the override switch ( Y page 60). G Observe Safety notes, see page 56.
Closing when a door window is blocked G Warning! Make sure that nobody can become trapped and be seriously or even fatally injured when closing a door window with greater force or without automatic reversal function. If the upward movement of a door window is blocked during the closing procedure, the door window will stop and open slightly.
Convenience closing feature When locking the vehicle, you can simultaneously close R the door windows R the tilt/sliding sunroof R the panorama roof with power tilt/sliding panel Afterward, you can extend the roller sunblinds of the panorama roof with power tilt/sliding panel.
sensor surface : on an outside door handle once more. The roller sunblinds extend. X Release sensor surface : on the outside door handle to interrupt the extending procedure. Driving and parking Safety notes G Warning! Make sure absolutely no objects are obstructing the pedals’ range of movement.
X Make sure the automatic transmission is in park position P . The transmission position indicator in the multifunction display should be on P ( Y page 118). With SmartKey X Do not depress the accelerator pedal. X Gasoline engine: Turn the SmartKey in the starter switch to position 3 ( Y page 85) and release it.
The engine does not start. You can hear the starter. There could be a malfunction in the engine electronics or in the fuel supply system. Carry out the following steps: X If you are starting the engine with the SmartKey: Turn the SmartKey in the starter switch to position 0 and repeat the starting procedure.
The automatic central locking function can be switched off ( Y page 144). Automatic transmission G Warning! It is dangerous to shift the automatic transmission out of park position P or neutral position N if the engine speed is higher than idle speed.
If no damage on major assemblies, fuel system, and engine mount can be determined: X Start the engine in the usual manner. Parking G Warning! Do not park this vehicle in areas where combustible materials such as grass, hay or leaves can come into contact with the hot exhaust system.
X Shift the automatic transmission into park position P ( Y page 116). X Engage the parking brake. i Always engage the parking brake in addition to shifting the automatic transmission into park position P .
! Allow the engine to warm up under low load use. Do not place full load on the engine until the operating temperature has been reached. Avoid spinning of a drive wheel for an extended period when driving off on slippery road surfaces.
i Shifting the automatic transmission out of park position P is only possible with the brake pedal depressed. Without the brake pedal depressed, the gear selector lever can be moved up or down, but the parking pawl remains engaged, not allowing shifting to occur.
G Warning! Keep in mind that turning off the engine alone only will shift the automatic transmission into neutral position N automatically. Always shift the automatic transmission into park position P before turning off the engine. Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury.
Shifting procedure The automatic transmission selects individual gears automatically, depending on R the selected gear range ( Y page 120) R the selected program mode: C / S ( Y page 120) or M (E 63 A.
Effect B Park position Shift the automatic transmission into park position P only when the vehicle is stopped. The park position is not intended to serve as a brake when the vehicle is parked. Rather, the driver should always engage the parking brake in addition to shifting the automatic transmission into park position P to secure the vehicle.
Rocking the vehicle Rocking the vehicle by shifting the automatic transmission directly between drive position D and reverse gear R can help free a vehicle stuck in mud or snow.
Program mode selector dial on E 63 AMG C Comfort For standard driving S Sport For sporty driving S+ Sport Plus For sporty driving with shorter shift times M Manual For manual gearshifting ( Y page 122) RS RACE START For optimum acceleration from a standing start i Program mode RS cannot be selected while driving.
manual program mode M , see “Manual shift program” ( Y page 122). E 63 AMG: For information on using the steering wheel gearshift control in manual program mode M , see “Manual shift program” ( Y page 122).
Program mode selector dial on E 63 AMG C Comfort For standard driving S Sport For sporty driving S+ Sport Plus For sporty driving with shorter shift times M Manual For manual gearshifting RS RACE START For optimum acceleration from a standing start i Program mode RS cannot be selected while driving.
Downshifting G Warning! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle’s ABS will not prevent this type of loss of control. X Briefly pull left gearshift control : ( Y page 122).
Instrument cluster Introduction For a full view illustration of the instrument cluster, see “Instrument cluster” ( Y page 28). G Warning! No messages will be displayed if either the instrument cluster or the multifunction display is inoperative.
! Excessive coolant temperature triggers a warning in the multifunction display. The engine should not be operated with a coolant temperature above 248 ‡ (120†), i.e. in the red zone of the coolant temperature gauge. Doing so may cause serious engine damage which is not covered by the Mercedes-Benz Limited Warranty.
: Multifunction display ; Press button ~ to end a call to reject an incoming call 6 to answer a call to dial 9 to redial 9 8 to mute Press button W X to set the volume to operate the RACETIMER 10 = Pr.
serve to call up relevant information or to customize the settings for your vehicle. It is helpful to think of the menus, and the functions within each menu, as being arranged in a circular pattern. In the Sett. menu, instead of functions, you will find a number of submenus for calling up and changing settings.
Menus and submenus Function : Trip menu ( Y page 129) ; AMG 12 menu ( Y page 131) = Navi menu ( Y page 134) ? Audio menu ( Y page 134) A Tel menu ( Y page 135) B Assistance menu ( Y page 137) C Servic.
If another display appears instead of the standard display: X Press button = or ; to select the Trip menu. or X Press button % repeatedly until the standard display appears. or X Press and hold button % until the standard display appears. Fuel consumption statistics since start X Press button = or ; to select the Trip menu.
X Press button : to select Yes . X Press button a to confirm. Remaining driving range and current fuel consumption X Press button = or ; to select the Trip menu. X Press button : or 9 to select the estimated remaining driving range and current fuel consumption display.
SETUP X Press button = or ; to select the AMG menu. X Press button 9 to select SETUP. or X Tap the AMG button on the center console ( Y page 165). i You can store and call up automatic transmission program mode and suspension style settings with the AMG button on the center console.
: RACETIMER ; Best lap time = Lap number Resetting current lap X Press button W while the timer is running. The timer stops. X Press button X . The lap time is reset to “0”. Deleting all laps It is not possible to delete a single saved lap. X Press button W while the timer is running.
: Lap number ; Lap time = Average speed during lap ? Lap length A Maximum speed during lap X Press button : or 9 to see other lap analyses. Navi menu The Navi menu contains the functions needed to operate your navigation system. X Press button = or ; to select the Navi menu.
Example illustration for FM radio : Stored memory position ; Station frequency = Wave band setting X Selecting next or previous stored station: Press button : or 9 briefly to select a stored station. X Selecting next or previous station in wave band: Press and hold button : or 9 to select a station.
Some jurisdictions prohibit the driver from using a mobile phone while driving a vehicle. Bear in mind that at a speed of just 30 mph (approximately 50 km/h), your vehicle is covering a distance of 44 feet (approximately 14 m) every second.
Example illustration : Selected name from the phone book X If the Symbol G appears on the right-hand side of the name several entries are present for the same name: Press button 6 or a and select the desired entry. X Press button 6 or a . The control system dials the selected phone number.
X Press button a again if you would like to change the current status. After the function has been activated, the PRE-SAFE ® Brake indicator Ä appears in the lower part of the multifunction display. When the HOLD function is switched on, the PRE-SAFE ® Brake indicator Ä will not appear.
R Vehicle status message memory ( Y page 139) R Restarting the tire pressure loss warning system (Canada only) ( Y page 233) R Checking tire inflation pressure electronically with the Advanced TPMS ( .
X Press button : or 9 to select the Factory Setting function. X Press button a . The function Reset All Settings? appears in the multifunction display. X Press button : or 9 to select Yes or No . Select Yes if you want to reset to factory settings. X Press button a to confirm.
Selecting speedometer display mode X Press = or ; to select the Sett. menu. X Press button : or 9 to select the Instr. Cluster submenu. X Press button a . X Press button : or 9 to select the Display Unit Speed-/Odometer: function. The current setting is shown.
X Press button a to change the current status. Depending on the previous status, the Daytime Running Lamps: mode will be Enabled or Disabled . With Daytime Running Lamps mode enabled and the exterior lamp switch at position $ or c , the daytime running lamps are switched on when the engine is running.
If, after turning off the engine, you do not open or close a door, the lamps will automatically go out after 60 seconds. The following lamps will come on R Parking lamps R Tail lamps R License plate lamps R Side marker lamps R Front fog lamps X Press button = or ; to select the Sett.
X Press button a to change the current status. Depending on the previous status, the interior lighting delayed shut-off feature will be Enabled or Disabled . Vehicle submenu Access the Vehicle submenu via the Sett. menu. Use the Vehicle submenu to switch the automatic central locking or the radar sensors on or off.
Removal, tampering, or altering of the device will void any warranties, and is not permitted. Do not tamper with, alter, or use in any non-approved way. Any unauthorized modification to this device could void the user’s authority to operate the equipment.
X Press button = or ; to select the Sett. menu. X Press button : or 9 to select the Convenience submenu. X Press a . X Press button : or 9 to select the Belt Adjustment: function. The current setting Enabled or Disabled is shown. X Press button a to change the current status.
previously set speed and wishes to resume this particular preset speed. G Warning! The cruise control brakes automatically so that the set speed is not exceeded.
The cruise control speed segments in the multifunction display goes out and an acoustic warning will sound. Observe additional messages in the multifunction display that may appear. Depressing the accelerator pedal does not deactivate the cruise control.
X Briefly pull the cruise control lever in direction of arrow ? . If no speed is stored, the current speed is set and stored. X Remove your foot from the accelerator pedal.
The DISTRONIC PLUS does not function in adverse sight and distance conditions. Do not use the DISTRONIC PLUS during conditions of fog, heavy rain, snow or sleet. G Warning! The DISTRONIC PLUS cannot take weather conditions into account. Switch off the DISTRONIC PLUS or do not switch it on if: R roads are slippery or covered with snow or ice.
refer to this section of your Operator’s Manual when asked. i USA only: This device has been approved by the FCC as a “Vehicular Radar System”. The radar sensor is intended for use in an automotive radar system only. Removal, tampering, or altering of the device will void any warranties, and is not permitted by the FCC.
vehicle ahead and your vehicle’s current speed indicate that the DISTRONIC PLUS will not be capable of slowing the vehicle sufficiently to maintain the preset following distance, which creates a danger of a collision. Immediately brake the vehicle to increase your distance to the preceding vehicle.
DISTRONIC PLUS deactivated When the DISTRONIC PLUS is deactivated, you will see the following display in the multifunction display. Example illustration : Preceding vehicle, if detected ; Actual dista.
Switching on while driving You can switch on the DISTRONIC PLUS when the vehicle speed is above 20 mph (30 km/h). Below 20 mph (30 km/h) , you can only switch on the DISTRONIC PLUS if the preceding vehicle has been detected and is shown in the multifunction display.
will no longer brake your vehicle. You are always responsible for maintaining a distance from other vehicles, observing road speeds and braking well in advance.
of the vehicle could cause an accident and/ or serious injury to you and others. You can increase or decrease the set speed in 1 mph (Canada: 1 km/h) increments or in 5 mph (Canada: 10 km/h) increments.
R you shift the automatic transmission into park position P , reverse gear R , or neutral position N while driving R the radar sensors are switched off R you pull the DISTRONIC PLUS lever in direction.
PLUS could lose sight of the preceding vehicle. Your vehicle could then accelerate to the previously selected speed. The DISTRONIC PLUS regulates only the distance between your vehicle and those directly ahead of it. It may not register stationary objects in the road, e.
The DISTRONIC PLUS has not yet detected the vehicle changing lanes. There will be insufficient distance to the lane-changing vehicle. Narrow vehicles Because of their narrow profile, the vehicles traveling near the outer edges of the lane have not yet been detected by the DISTRONIC PLUS.
R the vehicle is standing still and the brake pedal is depressed (left foot) R the automatic transmission is in drive position D Activating RACE START X Depress the brake pedal with your left foot and keep it depressed. X Turn the program mode selector dial clockwise ( Y page 121) until the RS lamp on the dial comes on.
X Release the brake pedal. X Carefully depress the accelerator pedal. The hill-start assist system is inactive R when starting off on a level road or downhill grades R with the automatic transmission .
Activating HOLD X Make sure the activation conditions are met. X Depress the brake pedal. X Continue to depress the brake pedal with increased pedal pressure until the message HOLD appears in the multifunction display. The HOLD function is activated. You can now release the brake pedal.
suspension setup adjusts the damping behavior and the ride height for your vehicle. The AIRMATIC consists of two components. The electronically controlled damping system ( Y page 163) and the vehicle level control ( Y page 163). Damping system The damping system is controlled electronically and operates continuously.
i These height adjustments are so small that you may not notice any change. Adjusting vehicle level manually G Warning! To help avoid personal injury, keep hands and feet away from wheel housing area, and stay away from under the vehicle when lowering the vehicle chassis.
damping is adjusted individually for each wheel. Driving safety and tire comfort are increased. The fine tuning of the damping is dependent on: R your driving style R road surface conditions R your personal settings (Comfort, Sport, or Sport+) When you start the engine, the Comfort driving mode is selected automatically.
indicates the relative distance between the vehicle and an obstacle visually and audibly. The Parktronic system is activated automatically when R you switch on the ignition and R you release the parki.
Front sensors Center approx. 40 in (100 cm) Corners approx. 24 in (60 cm) Rear sensors Center approx. 48 in (120 cm) Corners approx. 32 in (80 cm) Minimum distance Center approx.
R Front area: An intermittent acoustic warning will sound as the first red distance segment illuminates and a constant acoustic warning lasting a maximum of 2 seconds will sound for the second red distance segment. The signal is canceled when the automatic transmission is shifted into park position P or the parking brake is engaged.
G Warning! The Parking Guidance is only an aid and may display parking spaces that are not suitable for parking such as R no-parking zones R parking space with unsuitable road/ground surface R driveways R entrances/exits The Parking Guidance scans for and measures potential parking spaces when driving past.
speed of up to 22 mph (35 km/h). It scans automatically for and measures potential parking spaces on both sides of the vehicle. Example illustration : Detected parking space on the left ; Parking spac.
Example illustration X With the vehicle still standing, turn the steering wheel in the indicated direction until the arrow is completely white and an acoustic signal sounds. X Pulling into parking space: Keep the steering wheel in position and drive backward carefully.
The rear view camera does not relieve you of the responsibility to be cautious. Take care and pay careful attention. The rear view camera may not show objects which are R very close to the rear bumper.
A camera at the top of the windshield measures the infrared light and shows a black-and-white image in the COMAND system display. The image in the COMAND system display corresponds to a road lit up by high-beam headlamps. G Warning! The Night View Assist Plus is only an aid to support you while driving and cannot substitute your careful attention.
i The infrared headlamps only come on above a speed of approximately 6 mph (10 km/h). Therefore, when you are at a standstill, you do not have a complete view and cannot check the function of the Night View Assist Plus. Pedestrian detection The Night View Assist Plus detects pedestrians by means of specific characteristics, e.
X Cleaning inside of windshield: Use a soft, non-scratching cloth ( Y page 263). Blind Spot Assist The Blind Spot Assist uses radar sensors to monitor the area on both sides of your vehicle. It will assist you when you change lanes driving at speeds of above 20 mph (30 km/h).
G Warning! The Blind Spot Assist monitors certain areas in the immediate vicinity of your vehicle. Vehicles approaching and passing at speeds that exceed the speed of your vehicle significantly will not be detected. There will be no warning display and no audible warning.
When you shift the automatic transmission in reverse gear R , yellow indicator lamps : in the exterior rear view mirrors goes out after approximately 3 seconds. The Blind Spot Assist is then not active. The brightness of indicator lamps/warning lamps : is controlled automatically depending on the brightness of the ambient light.
The system does not issue a warning when R steering, braking, or accelerating in a clearly active manner, e.g. when changing lanes, passing, exiting a highway R cutting a narrow curve R making a very .
recognize dangers too late which could result in an accident and serious injury to you and/ or others. The ATTENTION ASSIST interprets your fatigue or increasing inattentiveness considering the follow.
Climate control system Overview of climate control system functions Your vehicle is equipped with either of the following climate control systems: Dual-zone automatic climate control USA only Canada o.
Control panels Dual-zone automatic climate control USA only Function Recommendation/Notes : Air distribution and air volume (automatic mode) i Switch on the automatic mode. The indicator lamp above button à comes on. ( Y page 186) ; Front defroster i Keep this setting selected only until the windshield and the front door windows are clear again.
Function Recommendation/Notes H Temperature control, driver’s side i Set the temperature to 72‡ (22†). ( Y page 186) I Display Canada only Function Recommendation/Notes : Air recirculation i Only use this function for a short time, e.g. in a tunnel.
Function Recommendation/Notes G Air volume ( Y page 189) H Temperature control, driver’s side i Set the temperature to 72‡ (22†). ( Y page 186) 3-zone automatic climate control Canada only Function Recommendation/Notes Front climate control panel : Air distribution and air volume (automatic mode) i Switch on the automatic mode.
Function Recommendation/Notes B Residual heat/ ventilation i With the engine turned off, it is possible to continue to heat or ventilate the interior. ( Y page 191) C A/C cooling on/off i Switch on/off the air conditioning. ( Y page 185) D Rear window defroster ( Y page 191) E Climate control on/ off i Switch on/off the climate control system.
It can only function optimally when you are driving with the windows, the tilt/sliding sunroof or tilt/sliding panel closed. Nearly all dust particles, pollutants and odors are filtered out before outside air enters the passenger compartment through the air distribution system.
The air conditioning uses the refrigerant R134a. This refrigerant is free of CFCs which are harmful to the ozone layer. Deactivating It is possible to deactivate the air conditioning. The interior air will then no longer be cooled or dehumidified. X Press button ¿ .
in small increments, preferably starting at 72‡ (22†). X Increasing/decreasing: Press rocker switch E or H ( Y page 181) up or down. 3-zone automatic climate control You can set the air temperature for each of the 3 zones separately. You should raise or lower the temperature setting in small increments, preferably starting at 72‡ (22†).
Side air vents Example illustration driver’s side : Left side defroster air vent, fixed ; Left side air vent, adjustable = Thumbwheel for air volume control for adjustable left side air vent X Opening/closing: Turn thumbwheel = upward or downward.
B-pillar air vents Vehicles with 3-zone automatic climate control, Canada only : Side air vent, adjustable ; Thumbwheel for air volume control for side air vent X Opening/closing: Turn thumbwheel ; to the left or to the right.
i Keep this setting selected only until the windshield or the front door windows are clear again. X Activating: Press button ¬ . The indicator lamp above the button comes on.
A quantity of outside air is added after approximately 30 minutes. X Deactivating: Press button g again. The indicator lamp above the button goes out. i The manually selected air recirculation mode is.
some time of operation depending on the outside temperature. X Switch on the ignition. X Switching on: Press button ¤ . The indicator lamp above the button comes on. X Switching off: Press button ¤ again. The rear window defroster switches off when the battery voltage is too low.
Sunroof switch : Raising ; Opening = Closing With the sunroof closed or raised, you can slide the sunroof screen forward and back. X Switch on the ignition. Opening X Opening manually: Press and hold the sunroof switch to the resistance point in direction of arrow ; .
in direction of arrow = until the tilt/sliding sunroof is fully closed. The tilt/sliding sunroof closes with greater force. If the tilt/sliding sunroof is blocked again and opens slightly: X Immediate.
until the roller sunblinds have reached their desired position. X Express operation: Move the roof panel switch past the resistance point in direction of arrow : , ; or = and release. The roller sunblinds retract/extend completely. X Stopping during express operation: Move the roof panel switch in any direction.
Opening X Opening manually: Press and hold the roof panel switch to the resistance point in direction of arrow ; . X Release the roof panel switch when the desired position is reached. X Express operation: To open the tilt/ sliding panel completely, press the roof panel switch past the resistance point in direction of arrow ; and release.
if the tilt/sliding panel does not open smoothly. ! Do not attempt to open the tilt/sliding panel before the tilt/sliding panel is properly synchronized.
Roof rack For information about further roof rack equipment, contact an authorized Mercedes- Benz Center. G Warning! Only use roof racks approved by Mercedes- Benz for your vehicle model to avoid damage to the vehicle. Follow the manufacturer’s installation instructions.
Parcel nets G Warning! Parcel nets are intended for storing light- weight items only, such as road maps, mail, etc. Heavy objects, objects with sharp edges, or fragile objects may not be transported in the parcel nets.
The two sections can be folded down separately. G Warning! When expanding the cargo volume, always fold the seat backrests fully forward. Unless you are transporting cargo, the seat backrests must remain properly locked in the upright position.
i To prevent unauthorized persons from access to the trunk, always lock the seat backrests in its upright position. Front storage compartments G Warning! To help avoid personal injury during a collision or sudden maneuver, exercise care when storing objects in the vehicle.
Front armrest storage compartment All models except E 63 AMG X Opening storage compartment: Pull button : . The armrest opens to the left and the right side automatically. X Closing storage compartment: Swing the left and/or right armrest backward until it engages.
X Opening: Pull release catch : and swing the storage compartment cover ; upward in direction of arrow. Storage bags G Warning! Storage bags are intended for storing light- weight items only. Heavy objects, objects with sharp edges or fragile objects may not be transported in the storage bag.
E 63 AMG X Opening/closing: Slide cover : forward or rearward. Cup holder in rear armrest X Opening: Open rear armrest storage compartment ( Y page 202). X Press release button : . Cup holder ; swings out and opens automatically. X Close rear armrest storage compartment.
closed while vehicle is in motion. Reflected glare can endanger you and others. : Sun visor ; Additional sun visor = Mounting ? Holder, e.g. for gas cards A Vanity mirror B Vanity mirror cover Glare through the windshield X Flip sun visor : down when you experience glare.
Ashtrays Center console ashtray i A storage compartment is located under the ashtray insert. ! The storage compartment is not heat- proof. When smoking always make sure the ashtray insert is present and properly inserted. X Opening: Open cover : ( Y page 203).
Power outlets The power outlets can be used to accommodate 12V DC electrical accessories (e.g. auxiliary lamps, mobile phone chargers) up to a maximum of 15 A (180 W). If the engine is off and the power outlets are being used extensively, the vehicle battery may become discharged.
information on to the Customer Assistance Center i Location of the vehicle on a map is only possible if the vehicle is able to receive signals from the GPS satellite network and pass the information on to the Customer Assistance Center.
An emergency call can also be initiated manually ( Y page 209). Once the emergency call is in progress, the indicator lamp in the SOS button will begin to flash. The message Connecting Call appears in the multifunction display and the COMAND system is muted.
Roadside Assistance button X Press and hold Roadside Assistance button : for longer than 2 seconds. A call to a Mercedes-Benz Roadside Assistance dispatcher will be initiated. The indicator lamp in Roadside Assistance button : will flash while the call is in progress.
When the connection is established, the message Call Connected appears in the multifunction display. The Tele Aid system will transmit data generating the vehicle identification number, model, color and location (subject to availability of cellular and GPS signals).
i The remote door unlock feature is available if the relevant cellular phone network is available. The SOS button will flash and the message Connecting Call will appear in the multifunction display to indicate receipt of the door unlock command.
When programming a garage door opener, park vehicle outside the garage. Do not run the engine while programming the integrated remote control. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death.
Rolling code programming To train a garage door opener (or other rolling code devices) with the rolling code feature, follow these instructions after completing the “Programming” portion (steps 1 through 6) of this text. For your convenience and to complete the procedure faster, you might want to have someone assist you.
Reprogramming a single signal transmitter button To program a device using a signal transmitter button previously trained, follow these steps: X Switch on the ignition. X Press and hold the desired signal transmitter button ( ; , = or ? ). Do not release the button.
i USA only: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.
X Press button = approximately 3 seconds. The currently selected zone appears in compass display ; . X Selecting zone: Press button = until the desired zone is selected.
218 212_AKB; 2; 41, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T09:14:21+02:00 - Seite 218.
Vehicle equipment ............................ 220 The first 1000 miles (1500 km) ....... 220 At the gas station ............................. 220 Engine compartment ........................ 223 Tires and wheels ............................... 228 Winter driving .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
! Never refuel vehicles with gasoline engine with diesel fuel. Never refuel vehicles with diesel engine with gasoline. Even small amounts of incorrect fuel will damage the fuel system and engine.
The fuel filler flap is located on the right-hand side of the vehicle towards the rear. X Turn off the engine. i Leaving the engine running and the fuel filler cap open can cause the yellow engine malfunction indicator lamp ; to illuminate. For more information, see also “Practical hints” ( Y page 310).
Engine compartment Hood G Warning! Do not pull the release lever while the vehicle is in motion. Otherwise the hood could be forced open by passing air flow. This could cause the hood to come loose and injure you and/or others. Opening G Warning! Do not open the hood when the engine is overheated.
X Push handle ; under the hood upwards. X Pull up on the hood and then release it. The hood will be held open at shoulder height by gas-filled struts automatically. Closing G Warning! When closing the hood, use extreme caution not to catch hands or fingers.
Example illustration: Gasoline engine Example illustration: Diesel engine X Pull out oil dipstick : . X Wipe oil dipstick : clean. X Slowly insert oil dipstick : fully into the dipstick guide tube. X Pull out oil dipstick : again after approximately 3 seconds to obtain accurate reading.
E 63 AMG X Unscrew filler cap : from filler neck. X Add engine oil as required. Be careful not to overfill with oil. Be careful not to spill any oil when adding. Avoid environmental damage caused by oil entering the ground or water. ! Excess oil must be siphoned or drained off.
The coolant level is correct if the level R for cold coolant: reaches marking bar = in coolant expansion tank ; R for warm coolant: is approximately 0.6 in (1.5 cm) higher X Add coolant as required. X Screw cap : back on and tighten it. For more information on coolant, see the “Technical data” section ( Y page 361) and ( Y page 365).
The brake fluid level is correct when it is between lower mark (MIN) ; and upper mark (MAX) : of the brake fluid reservoir. Tires and wheels Safety notes Contact an authorized Mercedes-Benz Center for information on tested and recommended rims and tires for summer and winter operation.
Recommended tire inflation pressure G Warning! Follow recommended tire inflation pressures. Do not underinflate tires. Underinflated tires wear excessively and/or unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated.
Important notes on tire inflation pressure G Warning! If the tire inflation pressure drops repeatedly, check the tires for punctures from foreign objects and/or whether air is leaking from the valves or from around the rim.
Example illustration: Tire inflation pressures specific to rim diameter Potential problems associated with underinflated and overinflated tires Underinflated tires G Warning! Follow recommended tire inflation pressures.
Tire and Loading Information placard on the driver’s door B-pillar ( Y page 237). If necessary, add air to achieve the recommended tire inflation pressure. X If you have overfilled the tire, release tire inflation pressure by pushing the metal stem of the valve with e.
applying the brakes and avoiding abrupt steering maneuvers. Restarting the tire pressure loss warning system The tire pressure loss warning system must be restarted in the following situations: R afte.
G Warning! The TPMS does not indicate a warning for wrongly selected inflation pressures. Always adjust tire inflation pressure according to the Tire and Loading Information placard or the supplemental tire inflation pressure information on the inside of the fuel filler flap.
pressure displayed by the control system apply to sea level. In high-altitude locations, the reading on a tire pressure gauge will be higher than the reading issued by the vehicle’s control system. Do not reduce the tire inflation pressure under such circumstances.
Example illustration The respective tire is indicated by a red rectangle. Restarting Advanced TPMS G Warning! It is the driver’s responsibility to set the tire inflation pressure to the recommended cold tire inflation pressure. Underinflated tires affect the ability to steer or brake the vehicle.
may be displayed for the wrong position temporarily. After driving for a few minutes, the inflation pressure will be shown for the correct position. Maximum tire inflation pressure G Warning! Never exceed the maximum tire inflation pressure. Follow recommended tire inflation pressures.
Tire and Loading Information G Warning! Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver’s door B-pillar. Overloading the tires can overheat them, possibly causing a blowout.
X Step 4: The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1 400 lbs and there will be five 150 lbs passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1 400 - 750 (5 x 150) = 650 lbs).
Example 1 Example 2 Example 3 Step 1 Combined weight limit of occupants and cargo from Tire and Loading Information placard 1 500 lbs 1 500 lbs 1 500 lbs Example 1 Example 2 Example 3 Step 2 Number of.
Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for either the front or rear axle. You can obtain the GVWR and GAWR from the certification label. The certification label can be found on the driver’s door B-pillar, see the “Technical data” section ( Y page 346).
MOExtended system The MOExtended system allows you to continue driving your vehicle even if there is a total loss of pressure in one or more tires. You may only use the MOExtended system in conjunction with the tire pressure loss warning system ( Y page 232) or the Advanced TPMS ( Y page 233).
Do not allow your tires to wear down too far. Adhesion properties on wet roads are sharply reduced at tread depths of less than 1 / 8 in (3 mm). Treadwear indicators (TWI) are required by law. These indicators are located in six places on the tread circumference and become visible at a tread depth of approximately 1 / 16 in (1.
tire graded 150 would wear one and one-half (1 1 / 2 ) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, h.
G Warning! Have the tightening torque checked after changing a wheel. Wheels could become loose if not tightened with a torque of 96 lb-ft (130 Nm). Only use genuine Mercedes-Benz wheel bolts specified for your vehicle’s rims. Tire rotation can be performed on vehicles with tires of the same dimension all around.
Tire size designation, load and speed rating : Tire width ; Aspect ratio in % = Radial tire code ? Rim diameter A Load index B Speed symbol i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration.
For example, a load rating of 91 corresponds to a maximum load of 1356 lb (615 kg) the tire is designed to support. See also “Maximum tire load” ( Y page 241) where the maximum load associated with the load index is indicated in kilograms and lbs.
Index Speed rating H M+S 14 up to 130 mph (210 km/h) V M+S 14 up to 149 mph (240 km/h) i Not all M+S rated tires provide special winter performance. Make sure the tires you use show M+S and the mountain/ snowflake i marking on the tire sidewall.
The TIN is a unique identifier. The TIN facilitates efforts by tire manufactures to notify purchasers in recall situations or other safety matters concerning tires.
radio, and heater, to the extent that these items are available as factory-installed equipment (whether installed or not). Air pressure The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi), kilopascal (kPa), or bar.
Maximum permissible tire inflation pressure This number is the greatest amount of air pressure that should ever be put in the tire. Normal occupant weight The number of occupants the vehicle is designed to seat, multiplied by 68 kilograms (150 lb).
Treadwear indicators Narrow bands, sometimes called “wear bars” that show across the tread of a tire when only 1 / 16 in (1.6 mm) of tread remains. Uniform Tire Quality Grading Standards A tire information system that provides consumers with ratings for a tire’s traction, temperature and treadwear.
control. Other settings may result in damage to your vehicle. ! Some tire sizes do not leave adequate clearance for snow chains. To help avoid serious damage to your vehicle or tires, make sure the use of snow chains is permissible as specified in the “Technical data” section of this Operator’s Manual.
Depressing the brake pedal periodically when traveling at length on salt-strewn roads can bring road-salt-impaired braking efficiency back to normal. If the vehicle is parked after being driven on salt-treated roads, the braking efficiency should be tested as soon as possible after driving is resumed.
When using the engine’s braking power, a drive wheel may not spin for an extended period of time, e.g. on slippery road surfaces. This may cause serious damage to the drivetrain which is not covered by the Mercedes-Benz Limited Warranty.
! Vehicles with 4MATIC: Only conduct operational or performance tests on a two-axle dynamometer. If such tests are necessary, contact an authorized Mercedes-Benz Center. You could otherwise seriously damage the brake system or the transfer case which is not covered by the Mercedes-Benz Limited Warranty.
Driving off Warm up the engine smoothly. Do not place full load on the engine until the operating temperature has been reached. ! When driving off on a slippery surface, do not allow a drive wheel to spin for an extended period with the ESC switched off.
Emission control Certain systems of the engine serve to keep the toxic components of the exhaust gases within permissible limits required by law. These systems will function properly only when maintained strictly according to factory specifications.
Clearing the maintenance service indicator message The maintenance service indicator message is cleared automatically R after approximately 10 seconds when you switch on the ignition R after approxima.
engine damage and/or other vehicle damage not covered by the Mercedes-Benz Limited Warranty. Vehicle care Cleaning and care of the vehicle Notes Regular and proper care will help to maintain the value of your vehicle. G Warning! Many cleaning products can be hazardous.
Scratches, corrosive deposits, corrosion or damage due to negligent or incorrect care cannot always be removed or repaired with the vehicle-care products recommended here.
X Only use a mild vehicle wash detergent, such as Mercedes-Benz approved Car Shampoo. X Thoroughly spray the vehicle with a diffused jet of water. X Do not spray directly towards the ventilation intake. X Use plenty of water and rinse the sponge and chamois frequently.
Cleaning the driving systems sensors X Switch off the ignition. X Clean DISTRONIC PLUS/PRE-SAFE ® Brake system sensor cover : by hand. To clean DISTRONIC PLUS/PRE-SAFE ® Brake system sensor cover : .
covering a distance of 44 feet (approximately 14 m) every second. ! Do not clean the lens of the Night View Assist Plus camera. If the camera lens is dirty, please contact an authorized Mercedes-Benz Center. X Use recessed handle : of camera cover to swing camera cover downward.
Cleaning the panorama roof The rear part of the tilt/sliding panel has a protective layer on the inside. X Use a soft, clean cloth and a mild window cleaning solution. An automotive glass cleaner is recommended. ! Do not use a dry cloth, abrasives, solvents or cleaners containing solvents.
Carpets X Use Mercedes-Benz approved Carpet and Fabric Care for cleaning the carpets. Headliner and shelf below rear window X Use a soft bristle brush or a dry-shampoo cleaner in case of excessive dirt. Seat belts X Only use clear, lukewarm water and soap.
Vehicle equipment ............................ 268 Where will I find ...? .......................... 268 Vehicle status messages in the multifunction display ....................... 272 What to do if … .................................. 304 Unlocking/locking manually .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
X Engage floor handle = on upper trunk lip ; . Vehicles without spare wheel i Vehicles without spare wheel are not factory-equipped with the tools required for a wheel change such as a jack or a wheel wrench. Some tools required for a wheel change are specific to your vehicle.
X Removing vehicle tool kit box: Pull tab : in direction of arrow ; and lift vehicle tool kit box D . X Remove vehicle tool kit box D from luggage bowl E . X Opening vehicle tool kit box cover: Pull tab B in direction of arrow A and open vehicle tool kit box cover = .
Storage position X Turn the crank handle in the direction of arrow as far as it will go. Operational position X Turn the crank handle clockwise. Before placing the jack back into the vehicle tool kit: X Fully collapse the jack. X Fold in the crank handle (storage position).
Storing the spare wheel after use If you wish to store the spare wheel after use, carry out the following steps. Otherwise, the spare wheel may not fit into the spare wheel well. ! Make sure the spare wheel is dry before storing it. X Unscrew the valve cap from the valve of the collapsible tire.
For your convenience the messages are divided into text messages ( Y page 274) and symbol messages ( Y page 287). Vehicle status messages in the multifunction display 273 Practical hints 212_AKB; 2; 41, en-US d2ureepe, Version: 2.
Text messages Safety systems Display messages Possible causes/consequences and M Solutions PRE-SAFE Inoperativ e See Operator's Manual The PRE-SAFE ® system has failed. All other occupant safety systems, such as the air bags, are still available.
Display messages Possible causes/consequences and M Solutions PRE-SAFE Functions Limited See Operator's Manual The PRE-SAFE ® Brake is unavailable due to a malfunction. The BAS PLUS may also be unavailable. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Operator’s Manual USA only: The front passenger front air bag is activated while driving even though a child, small individual, or object below the system’s weight threshold is on the front passenger seat, or the front passenger seat is empty.
Display messages Possible causes/consequences and M Solutions If above conditions are not met, the system is not working properly. Have the system checked at an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Disabled See Operator’s Manual USA only: The front passenger front air bag is deactivated while driving even though an adult or someone larger than a small individual is occupying the front passenger seat.
Display messages Possible causes/consequences and M Solutions Check Child Seat Position See Operator's Manual Vehicles with BabySmart™ (Canada only): The BabySmart™ child seat is not positioned correctly. Risk of injury! X Install the BabySmart™ child seat in correct position.
Display messages Possible causes/consequences and M Solutions DISTRONIC PLUS Currently Unavailabl e See Operator's Manual The DISTRONIC PLUS is temporarily unavailable.
Display messages Possible causes/consequences and M Solutions DISTRONIC PLUS - - - mph One of the activation conditions for the DISTRONIC PLUS has not been fulfilled. You may have attempted to set a speed below 20 mph (30 km/h). X Drive faster than 20 mph (30 km/h) if the situation allows and set the speed.
Display messages Possible causes/consequences and M Solutions Parking Guidance Canceled The Advanced Parking Guidance has been canceled because: R the vehicle is sliding R the bumper became dirty in the area of the sensors R there has been a malfunction X Use the Advanced Parking Guidance again later.
Display messages Possible causes/consequences and M Solutions Lane Keeping Assist Currently Unavailabl e See Operator's Manual The Lane Keeping Assist is temporarily unavailable.
Display messages Possible causes/consequences and M Solutions Service Required Do Not Shift Gears Visit Dealer In addition an acoustic warning sounds. The automatic transmission cannot be shifted out of the current transmission position because of a malfunction.
Display messages Possible causes/consequences and M Solutions Check Tire Pressure Soon The tire pressure loss warning system indicates that the tire inflation pressure is too low in at least one tire. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
Display messages Possible causes/consequences and M Solutions Tire Press. Monitor Currently Unavailabl e The Advanced TPMS cannot monitor the tire inflation pressure due to a nearby radio interference source or insufficient power supply.
Do not overinflate tires. Overinflated tires can adversely affect handling and ride comfort, wear unevenly, increase stopping distance, and result in sudden deflation (blowout) because they are more likely to become punctured or damaged by road debris, potholes etc.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) ABS and ESC Inoperativ e See Operator’s Manual In addition, the yellow ESC warning lamp ä , the yellow ESC OFF warning lamp å , and the yellow ABS indicator lamp ! come on.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) EBD, ABS, and ESC Inoperativ e See Operator's Manual In addition, the yellow ESC warning lamp ä , the yellow ESC OFF warning lamp å , and the yellow ABS indicator lamp ! come on.
Safety systems Display messages Possible causes/consequences and M Solutions ÷ ESC Inoperativ e See Operator's Manual In addition, the yellow ESC warning lamp ä and the yellow ESC OFF warning lamp å come on.
Display messages Possible causes/consequences and M Solutions 6 Rear Left SRS Malfunctio n Service Required Components of the left rear passenger’s supplemental restraint system may not work properly. X Drive with added caution to the nearest authorized Mercedes-Benz Center.
Driving systems Display messages Possible causes/consequences and M Solutions ¨ Vehicle Rising The vehicle is adjusting to your level selection. ¨ Vehicle Rising Please Wait The vehicle level is too low. X Wait until the message disappears from the multifunction display.
Display messages Possible causes/consequences and M Solutions À Attention Assist Inoperativ e The ATTENTION ASSIST is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. Vehicle Display messages Possible causes/consequences and M Solutions N The trunk is open.
Display messages Possible causes/consequences and M Solutions + Key Does Not Belong to Vehicle The SmartKey in the starter switch does not belong to the vehicle. X Remove the SmartKey from the starter switch. + Replace Key Battery The batteries in the SmartKey with KEYLESS-GO are discharged.
Display messages Possible causes/consequences and M Solutions D Power Steering Malfunctio n See Operator's Manual Power assistance for the steering system is not available. A considerably higher degree of effort is necessary to steer the vehicle.
Display messages Possible causes/consequences and M Solutions ? Coolant Low Stop Vehicle! Turn Engine Off The coolant is too hot. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Engage the parking brake.
Display messages Possible causes/consequences and M Solutions ? Coolant Low Stop Vehicle! Turn Engine Off The poly-V-belt could be broken. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Check the poly-V-belt.
Display messages Possible causes/consequences and M Solutions 4 Check Engine Oil At Next Refueling The engine oil has dropped to a critical level. X Check the engine oil level ( Y page 224) and add engine oil as required ( Y page 225). X If you must add engine oil frequently, have the engine checked for possible leaks.
Display messages Possible causes/consequences and M Solutions ¸ Replace Air Filter The air filter is clogged. X Have the air filter checked at an authorized Mercedes-Benz Center. ! Check Fuel Filter There is water in the fuel filter. X Have the water drained at an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Check Left Daytime Running Light or Check Right Daytime Running Light The left or right daytime running lamps are malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Check Rear Left Sidemarker Lamp or Check Rear Right Sidemarker Lamp The rear left side or right side marker lamp is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible.
Display messages Possible causes/consequences and M Solutions b Auto Lamp Function Inoperativ e The light sensor is malfunctioning. The headlamps come on automatically. X Contact an authorized Mercedes-Benz Center as soon as possible. To switch off the headlamps (U.
Display messages Possible causes/consequences and M Solutions b Check Left Cornering Light or Check Right Cornering Light The left or right corner-illuminating lamp is malfunctioning.
Tires Display messages Possible causes/consequences and M Solutions h Tire Press. Warning Caution Tire Malfunctio n At least one tire is deflating. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers. X If necessary, change the wheel ( Y page 323).
Brake Problem Possible causes/consequences and M Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The brake system is still functioning normally but due to a malfunction.
Problem Possible causes/consequences and M Solutions $ (USA only) J (Canada only) The red brake warning lamp comes on while driving. The brake system is malfunctioning. Braking characteristics may be impaired. Risk of accident! X Do not drive any further.
Safety systems Problem Possible causes/consequences and M Solutions 7 The red seat belt telltale comes on for a maximum of 6 seconds after starting the engine. The seat belt telltale reminds you and your passengers to fasten your seat belts before driving off.
i After 60 seconds with an unfastened seat belt the warning chime stops sounding and the seat belt telltale illuminates continuously. The seat belt telltale will only go out if both, the driver and front passenger’s seat belt are fastened, or the vehicle is standing still and a front door is opened.
Problem Possible causes/consequences and M Solutions ä å The yellow ESC warning lamp and the yellow ESC OFF warning lamp come on while the engine is running.
Vehicle Problem Possible causes/consequences and M Solutions 8 The yellow fuel tank reserve warning lamp comes on when the engine is running. The fuel level has gone below the reserve mark.
Problem Possible causes/consequences and M Solutions ? The red coolant temperature warning lamp comes on when the engine is running. There is insufficient coolant in the reservoir. If this warning lamp comes on frequently, there is a leak in the cooling system.
Tires Problem Possible causes/consequences and M Solutions h USA only: Combination low tire pressure telltale/TPMS malfunction telltale for the Advanced TPMS illuminates continuously. Canada only: Low tire pressure telltale for the Advanced TPMS illuminates continuously.
Underinflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability. Please note that the TPMS is not a substitute for proper tire maintenance.
Problem Possible causes/consequences and M Solutions USA only: 45 The front passenger front air bag off indicator lamp illuminates and remains illuminated with the weight of a typical adult or someone larger than a small individual on the front passenger seat.
The anti-theft alarm system will trigger when you R unlock the driver’s door or the trunk with the mechanical key and R open the driver’s door or the trunk To cancel the alarm, insert the SmartKey into the starter switch. Removing the mechanical key X Move locking tab : in the direction of arrow.
the front passenger door and the rear doors. X Exit the vehicle. X Close the driver’s door. X Remove mechanical key ; from the SmartKey ( Y page 315). X Insert mechanical key ; into the driver’s door lock. X Turn mechanical key ; clockwise to position 1 .
G Warning! When pushing back the head restraint cushion, make sure your fingers do not become caught between the head restraint cushion and the cover. Failing to do so may lead to injury. X Pull the top of the head restraint cushion in direction of arrow : as far as it will go.
X Press mechanical key ; into the SmartKey opening until battery compartment cover : opens. Do not keep the cover shut. X Remove the battery compartment cover. X Pat the SmartKey against the palm of your hand until battery = falls out. X Insert the new battery with the positive terminal (+) facing up.
Bulbs You can replace the following bulbs yourself: Halogen headlamps Type : Low-beam lamp: H7 55 W ; High-beam lamp: H7 55 W = Parking and standing lamp: W 5 W ? Turn signal lamp: 3457A Bi-Xenon head.
recommended to have such work done by a qualified technician. Before you start to replace a bulb for a front lamp, do the following: X Switch off the ignition.
X Driver’s side only: Release the washer fluid reservoir ( Y page 320). X Turn housing cover : counterclockwise and remove it. X Turn bulb socket ; counterclockwise and pull it out. X Pull the bulb out of bulb socket ; . X Insert the new bulb into bulb socket ; .
X Turn the bulb counterclockwise with light pressure and pull it out of bulb socket : . X Insert the new bulb into bulb socket : and turn the bulb clockwise. X Insert bulb socket : into the housing and turn it clockwise. X Driver’s side only: Fix the washer fluid reservoir ( Y page 320).
Flat tire Safety notes Your vehicle may be equipped with: R a Minispare wheel R a spare wheel with collapsible tire R an MOExtended system (your vehicle does not have a spare wheel or a TIREFIT kit) R a TIREFIT kit 19 (your vehicle does not have a spare wheel) G Warning! The dimensions of the spare wheel are different from those of the road wheels.
i Vehicles without spare wheel are not factory-equipped with the tools required for a wheel change such as a jack or a wheel wrench. Some tools required for a wheel change are specific to your vehicle. Contact an authorized Mercedes-Benz Center to obtain the tools approved for your vehicle.
X On the wheel to be changed, loosen but do not yet remove the wheel bolts (approximately one full turn with wheel wrench : ). The jack take-up brackets are located directly behind the front wheel housings and in front of the rear wheel housings.
Removing the wheel ! E 63 AMG with ceramic composite brake disk: The rim could strike the ceramic composite brake disk when removing and attaching the spare wheel. The ceramic composite brake disk could be damaged. Exercise appropriate care and have a second person assist you if possible or use a second alignment bolt.
X Guide the spare wheel onto the alignment bolt and push it on. X Insert the wheel bolts and tighten them slightly. X Unscrew the alignment bolt. X Install the last wheel bolt and tighten it slightly.
X Turn the SmartKey in the starter switch to position 1 . or X Vehicles with KEYLESS-GO: Press the KEYLESS-GO start/stop button once. Do not depress the brake pedal. X Press I on electric air pump switch ; . The electric air pump switches on and inflates the collapsible tire.
G Warning! Have the tightening torque checked after changing a wheel. The wheels could come loose if they are not tightened to a torque of 96 lb-ft (130 Nm). X Fully collapse the jack, with handle folded in (storage position), see ( Y page 270). X Store the jack and the other vehicle tools in the designated storage space.
Small tire punctures, particularly those in the tread, can be sealed with TIREFIT. TIREFIT can be used in ambient temperatures down to -4‡ (-20†). G Warning! TIREFIT is a limited repair device. TIREFIT cannot be used for cuts or punctures larger than approximately 0.
Version 1 Version 2 X Version 1 only: Open flap C on the electric air pump. X Pull plug ? and air hose A out of the pump housing. X Screw the air pump’s air hose A onto flange B of TIREFIT container : . X Stick TIREFIT container : upside down into notch ; of the electric air pump.
You may operate the air pump again after it has cooled off. If the tire inflation pressure of at least 26 psi (1.8 bar) is not attained: X Turn off the electric air pump by pressing 0 on electric air pump switch = . X Detach filler hose D from tire valve E .
Version 1: Open vent screw F on pressure gauge G ( Y page 331). Version 2: Press yellow deflate button a located in air pump housing next to pressure gauge G . X Drive to the nearest qualified workshop, e.g. an authorized Mercedes-Benz Center, to have the damaged tire replaced.
Starts: 20 appears in the multifunction display. i When the message Remaining Starts: 20 appears in the multifunction display, you can start the engine 20 more times. If you do not add AdBlue ® , the engine cannot be started beyond that point. Fill the AdBlue ® tank with approximately 1 gal (3.
For more information on AdBlue ® , see ( Y page 364). The AdBlue ® filler neck is located in the space underneath the trunk floor. X Switch off the ignition. X Open the trunk ( Y page 81). X Lift the trunk floor ( Y page 268). X Turn AdBlue ® filler cap cover : counterclockwise and remove it.
X Place AdBlue ® filler cap cover : as illustrated and turn it clockwise to its stop. X Lower the trunk floor. X Close the trunk. X Drive the vehicle at a speed of at least 10 mph (16 km/h). The message Check Additive See Operator’s Manual disappears after approximately 1 minute.
flush affected area with water and seek medical help if necessary. A battery will also produce hydrogen gas, which is flammable and explosive. Keep flames or sparks away from battery, avoid improper connection of jumper cables, smoking etc. G Warning! Do not place metal objects on the battery as this could result in a short circuit.
charging and could cause an explosion that may result in personal injury, paint damage or corrosion. An accessory battery charge unit specially adapted for Mercedes-Benz vehicles and tested and approved by Mercedes-Benz is available. It permits the charging of the battery in its installed position.
power by an external battery or starter pack. R Jump starting should only be performed when the engine and catalytic converter 22 are cold. R Do not jump start the engine or charge the battery if the battery is frozen. Let the battery thaw out first. R Only jump start from batteries with the same voltage rating (12 V).
X Connect negative terminal ? of charged battery B with negative terminal A with a jumper cable. Clamp the cable to negative terminal ? of charged battery B first. X Start engine of the vehicle with the discharged battery and run at idle speed. You can now turn on the electrical consumers.
Installing towing eye bolt Depending on whether you are towing a vehicle or you are being towed, the towing eye bolt can be screwed into threaded holes which are located behind covers on each bumper. The towing eye bolt is supplied with the vehicle tool kit, located underneath the trunk floor ( Y page 268).
Removing towing eye bolt X Loosen towing eye bolt ; by turning it counterclockwise. X Unscrew towing eye bolt ; . X Reinstalling cover: Fit cover : ( Y page 341) and snap it into place. X Store the towing eye bolt ; and wheel wrench back into the vehicle tool kit.
i While being towed with the hazard warning flasher in use, use the combination switch in the usual manner to signal turns. Only the selected turn signal will operate.
X With a dry cloth, remove any moisture from fuse box cover. X Opening: Release wire ; from fuse box cover. X Move aside wire ; . Route wire ; behind connection = to do this. X Release clamps : . X Closing: Make sure the sealing rubber is positioned properly.
Vehicle equipment ............................ 346 Parts service ..................................... 346 Warranty coverage ........................... 346 Identification labels .......................... 346 Vehicle specification E 350 (212.056) ...
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Example certification label (U.S. vehicles) ; VIN = Paintwork code Example certification label (Canada vehicles) ; VIN = Paintwork code i Data shown on certification label are for illustration purposes only. These data are specific to each vehicle and may vary from data shown in the illustration.
Vehicle specification E 350 (212.056) The quoted data apply only to the standard vehicle. Contact an authorized Mercedes- Benz Center for the corresponding data of all special bodies and special equipment. Engine E 350 Engine, type 272 Mode of operation 4-stroke engine, gasoline injection No.
Engine E 350 BlueTEC Engine, type 642 Mode of operation Diesel 4-stroke engine No. of cylinders 6 Bore 3.27 in (83.00 mm) Stroke 3.62 in (92.00 mm) Total piston displacement 182.3 cu in (2 987 cm 3 ) Compression ratio 16.5:1 Output acc. to SAE J 1349 210 hp/3 400 rpm (157 kW/3 400 rpm) Maximum torque acc.
Engine E 350 4MATIC Output acc. to SAE J 1349 27 268 hp/6 000 rpm (200 kW/6 000 rpm) Maximum torque acc. to SAE J 1349 258 lb-ft/ 2 400 - 5 000 rpm (350 Nm/ 2 400 - 5 000 rpm) Maximum engine speed 6 500 rpm Firing order 1-4-3-6-2-5 Poly-V-belt 2 392 mm Electrical system E 350 4MATIC Alternator 14 V/180 A Starter motor 12 V/1.
Engine E 550 Firing order 1-5-4-2-6-3-7-8 Poly-V-belt 2 392 mm Electrical system E 550 Alternator 14 V/180 A Starter motor 12 V/1.4 kW Battery 12 V/95 Ah Spark plugs, type NGK PLKR 7A Spark plugs, electrode gap 0.031 in (0.8 mm) Spark plugs, tightening torque 15 - 18 lb-ft (20 - 25 Nm) Main dimensions E 550 Overall vehicle length 191.
Electrical system E 550 4MATIC Spark plugs, electrode gap 0.031 in (0.8 mm) Spark plugs, tightening torque 15 - 18 lb-ft (20 - 25 Nm) Main dimensions E 550 4MATIC Overall vehicle length 191.9 in (4 874 mm) Overall vehicle width 32 81.5 in (2 071 mm) Overall vehicle height 57.
Main dimensions E 63 AMG Overall vehicle length 192.6 in (4 891 mm) Overall vehicle width 34 81.5 in (2 071 mm) Overall vehicle height 56.8 in (1 442 mm) Wheelbase 113.1 in (2 874 mm) Track, front 64.0 in (1 625 mm) Track, rear 62.8 in (1 594 mm) Ground clearance 4.
Moreover, tires and rims not approved by Mercedes-Benz may, under load, exhibit dimensional variations and different tire deformation characteristics that could cause them to come into contact with the vehicle body or axle parts. Damage to the tires or the vehicle may be the result.
Same size tires E 350 Luxury BlueTEC 35 E 350 BlueTEC 36 17" wheels Rims (light alloy) Wheel offset 8.0 J x 17 H2 1.89 in (48 mm) 8.0 J x 17 H2 1.
E 350 4MATIC 36 E 350 Luxury 4MATIC 35 18" wheels Rims (light alloy) Wheel offset 8.5 J x 18 H2 1.89 in (48 mm) All-season tires 37 245/40 R18 97V XL (Extra Load) M+S Winter tires 37,39 245/40 R1.
E 350 Sport 40 E 550 Sport 40 18" wheels Front axle AMG rims (light alloy) Wheel offset 8.5 J x 18 H2 1.89 in (48 mm) All-season tires 41 245/40 R18 97V XL (Extra Load) M+S Rear axle AMG rims (light alloy) Wheel offset 9.
E 63 AMG (Performance Package) 19" wheels Front axle AMG rims (light alloy) Wheel offset 9.0 J x 19 H2 1.46 in (37 mm) Summer tires 41 255/35 ZR19 (96Y) XL (Extra Load) Rear axle AMG rims (light alloy) Wheel offset 9.
E 350 E 350 4MATIC 17" wheel Rim (light alloy) Wheel offset 4.0 B x 17 H2 1.54 in (39 mm) Minispare tire 46 T 155/70 R17 110M Recommended tire inflation pressure 61 psi (4.2 bar) E 550 E 550 4MATIC 18" wheel Rim (light alloy) Wheel offset 4.
Model Capacity Fuels, coolants, lubricants, etc. Engine with oil filter E 350 E 350 BlueTEC E 350 4MATIC 8.5 US qt (8.0 l) Approved engine oils E 550 E 550 4MATIC 9.0 US qt (8.5 l) E 63 AMG 47 9.3 US qt (8.8 l) Automatic transmission E 350 E 350 BlueTEC E 550 9.
Model Capacity Fuels, coolants, lubricants, etc. Brake system All models approx. 0.53 US qt (0.5 l) MB Brake Fluid (DOT 4+) Cooling system E 350 E 350 4MATIC approx. 8.9 US qt (8.4 l) MB 325.0 Anticorrosion/ Antifreeze E 350 BlueTEC approx. 12.2 US qt (11.
Use the table below to determine the MB sheet number. Model Engine, type MB sheet number E 350 E 350 4MATIC 272 229.5 E 350 BlueTEC 642 229.51 E 550 E 550 4MATIC 273 229.5 E 63 AMG 156 229.5 51 i MB sheet numbers are printed on the outside of oil containers.
Direct skin contact with fuels and the inhalation of fuel vapors are damaging your health. ! To maintain the engine’s durability and performance, premium unleaded gasoline must be used.
not meeting Mercedes-Benz approved fuel standards. Gasoline additives A major concern among engine manufacturers is carbon build-up caused by gasoline. Mercedes-Benz recommends only the use of quality gasoline containing additives that prevent the build-up of carbon deposits.
water. Otherwise, the BlueTEC exhaust gas aftertreatment system could be damaged. Damage caused by using additives or diluting with water are not covered by the Mercedes-Benz Limited Warranty. Purity The purity of AdBlue ® is of particular importance for avoiding malfunctions in the exhaust gas aftertreatment.
such engines be specifically formulated to protect the aluminum parts. Failure to use such anticorrosion/antifreeze coolant will result in a significantly shortened service life. Therefore, the following product is strongly recommended for use in your vehicle: MB 325.
Washer system and headlamp cleaning system G Warning! Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned. X Use MB Windshield Washer Concentrate “MB SummerFit”.
368 212_AKB; 2; 41, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T09:14:21+02:00 - Seite 368.
Service and Literature Your authorized Mercedes-Benz Center has trained technicians and Genuine Mercedes- Benz Parts to service your vehicle properly. For expert advice and quality service, contact an authorized Mercedes-Benz Center.
Order no. 6515 3473 13 Part no. 212 584 58 81 Edition B 2010 É21258458817ËÍ 2125845881 212_AKB; 2; 41, en-US d2ureepe, Version: 2.11.8.1 2009-07-17T09:14:21+02:00 - Seite 370.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Mercedes-Benz 2010 E350 Sedan è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Mercedes-Benz 2010 E350 Sedan - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Mercedes-Benz 2010 E350 Sedan imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Mercedes-Benz 2010 E350 Sedan ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Mercedes-Benz 2010 E350 Sedan, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Mercedes-Benz 2010 E350 Sedan.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Mercedes-Benz 2010 E350 Sedan. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Mercedes-Benz 2010 E350 Sedan insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
