Manuale d’uso / di manutenzione del prodotto Not a Manual del fabbricante Mazda
Vai alla pagina of 452
Black plate (1,1) MX-5_8DG6-EA-13F_Edition1 Page1 Thursday , May 30 2013 10:49 AM Form No.8DG6-EA-13F.
Black plate (2,1) MX-5_8DG6-EA-13F_Edition1 Page2 Thursday , May 30 2013 10:49 AM Form No.8DG6-EA-13F.
Black plate (3,1) Thank you for choosing a Mazda. W e at Mazda design and build vehicles with complete customer satisfaction in mind. T o help ensure enjoyable and trouble-free operation of your Mazda, read this manual carefully and follow its recommenda tions.
Black plate (4,1) W e want to help you get the most driving pleasure from your vehicle. Y our owner's manual, when read from cover to cover, can do that in many ways. Illustrations complement the words of the manual to best explain how to enjoy your Mazda.
Black plate (5,1) MX-5_8DG6-EA-13F_Edition1 Page5 Thursday , May 30 2013 10:49 AM Form No.8DG6-EA-13F T able of Contents Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. 1 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags.
Black plate (6,1) MX-5_8DG6-EA-13F_Edition1 Page6 Thursday , May 30 2013 10:49 AM Form No.8DG6-EA-13F.
Black plate (7,1) 1 Y our V ehicle at a Glance Interior , exterior views and part identification of your Mazda. Interior Overview ....................................................................... ... 1-2 Interior Equipment (V iew A) ............
Black plate (8,1) Interior Equipment (V iew A) Door-lock knob ...................................................... ............................................ page 3-31 DSC OFF switch ................................................................
Black plate (9,1) Interior Equipment (V iew B) Audio control switch ............... ................................................................. ......... page 6-56 SRS air bags ............................ .......................................
Black plate (10,1) Interior Equipment (V iew C) W indblocker ...................................................................... ............................. ... page 6-86 Convertible top unlock lever ............... ..............................
Black plate (11,1) Front Hood .............................. ............................................................ ........................ page 3-41 W indshield wiper blades .......... ..........................................................
Black plate (12,1) Rear T runk lid .............................. ...................................................... ........................ page 3-33 Antenna ............... ................................................................. .....
Black plate (13,1) 2 Essential Safety Equipment Use of safety equipment, including seats, seat belt system, child-restraint systems and SRS air bags. Seats .......................................................... ....................................
Black plate (14,1) Seats WARNING Do not modify or replace the front seats: Modifying or replacing the front seats such as replacing the upholst ery or loosening any bolts is da ngerous. The front seats contain air bag components essential to the supplemental restrain t system.
Black plate (15,1) q Seat Recline WARNING Do not drive with either front seat reclined: Sitting in a reclined position while the vehicle is moving is dangerous because you do not get th e full protection from sea t belts. During sudden braking or a collisi on, you can slide under the lap belt and suffer serious inte rnal injuries.
Black plate (16,1) CAUTION When returning a rear -reclined seatback to its upright position, make sure you hold on to the seatback with you r other hand while operating the lever. If the seatback is not supported, it will flip forward suddenly and could cause injury.
Black plate (17,1) Seat W armer í The driver and passenger seats can be warmed by rotating the applicable seat warmer dial while the ignition is switched ON. The seat temperature increases as the number on the dial increases. When the seat warmers are not in use, rotate the seat warmer dials to 0.
Black plate (18,1) NOTE Use the seat warmer when the engine is running, and do not continue to use it for a long period of time. 2-6 Essential Safety Equipment Seats MX-5_8DG6-EA-13F_Edition1 Page18 Thursday , May 30 2013 10:49 AM Form No.
Black plate (19,1) Seat Belt Precautions Seat belts help to decrease the possibility of severe injury during accidents and sudden stops. Mazda recommends that the driver and passenger always wear seat belts. All of the seat belt retractors are designed to keep the lap/shoulder belts out of the way when not in use.
Black plate (20,1) WARNING Always wear your seat belt and make sure all occu pants are properly restrained: Not wearing a seat belt is extremely danger ous. During a collision, occupants not wearing seat belts could hit someone or things ins ide the vehicle or even be thrown out of the vehicle.
Black plate (21,1) CAUTION Belt retraction may become difficult if the belts and seat belt guides are soiled, so try to keep them clean. For more details about cleaning the seat belts, refer to “ Cleaning the Lap/Shoulder Belt Webbing ” (page 8-61).
Black plate (22,1) q Automatic Locking Mode T o enable seat belt automatic locking mode, pull it all the way out and connect it as instructed on the child-restraint system. It will retract down to the child-restraint system and stay locked on it. See the section on child restraint (page 2-18).
Black plate (23,1) Seat Belt WARNING Always wear the seat belt with it correctly routed in its guide : Wearing a seat belt without the seat belt routed in its guide is dangerous because the seat belt would not be able to provide adequate protection in an accident, which could result in serious injury.
Black plate (24,1) WARNING Positioning the Lap Por tion of the Seat Belt: The lap portion of the seat belt worn too high is dangerous. In a collision, this would concentrate the impa ct force directly on the abdominal area, causing serious injury. Wear the lap portion of the belt snugly and as low as possible.
Black plate (25,1) Seat Belt Pretensioner and Load Limiting Systems For optimum protection, the driver and passenger seat belts are equipped with pretensioner and load limiting systems. For both these systems to work properly you must wear the seat belt properly .
Black plate (26,1) Do not modify the components or wiring, or use electronic testing devices on the pretensioner system: Modifying the componen ts or wiring of the pretensioner system, including the use of electronic testing devices is dangerous.
Black plate (27,1) Seat Belt Extender If your seat belt is not long enough, even when fully extended, a seat belt extender may be available to you at no charge from your Authorized Mazda Dealer . This extender will be only for you and for the particular vehicle and seat.
Black plate (28,1) Do not leave a seat belt extender connected to the buckle: Leaving a seat belt exten der connected to the buckle without using the seat belt is dangerous.
Black plate (29,1) Seat Belt Reminder NOTE Consult an Authorized Mazda Dealer to deactivate or r estor e the belt reminder . Though the belt reminder can be deactivated, doing so will defeat the purpose of the system to warn the driver and the fr ont passenger in the event that their seat belts ar e not fastened.
Black plate (30,1) Child Restraint Precautions Mazda strongly urges the use of child-restraint syst ems for children smal l enough to use them. Y ou are required by law to use a child-restraint system for children in the U.
Black plate (31,1) Passenger seat weigh t sensors These sensors deactivate the passenger front and side air bags and also the passenger seat belt pretensioner system when the passenger air bag deactivation indica tor light illuminates.
Black plate (32,1) Refer to Passenger Seat Weigh t Sensors on page 2-37. Seating a child in a child-restraint system on the passenger seat is dangerous under certain conditio ns: This vehicle is equipped with both a passen ger seat weight senso r and a passenger air bag deactivation indicator light (page 2-37).
Black plate (33,1) Do not allow a child to lean over or against the side window of a vehicle with side air bags: Allowing anyone to lean over or against the door is dangerou s. If the vehicle is equipped with side air bags, the impa ct of an inflating side air bag could cause serious injury or death to the person.
Black plate (34,1) Child-Restraint System Installation Position In this owner's manual, explanation of child-restraint systems is provided for the following three types of popular child- restraint systems: infan t seat, child seat, booster seat. NOTE l Installation position is determined by the type of child-restraint system.
Black plate (35,1) Installing a Child- Restraint System The passenger lap/shoulder belt can easil y be converted into the automatic locking mode, which must be done to hold the child-restraint system. NOTE Follow the child-restraint system manufactur er's instructions carefully .
Black plate (36,1) 5. Make sure the passenger air bag deactivation indicator light illumin ates by using the key to turn the passenger air bag off after installing a child- restraint system on the pa ssenger seat.
Black plate (37,1) Supplemental Restraint System (SRS) Precautions The front and side supplementa l restraint systems (SRS) incl ude up to 4 air bags. Please verify the air bags equipped on you r vehicle by locating the “ SRS AIRBA G ” location indicators.
Black plate (38,1) Small children must be protected by a chil d-restraint system as stipulat ed by law in every state and province. In certain states and provi nces, larger children must use a child-restraint system (page 2-18).
Black plate (39,1) Do not sit too close to a door or lean against doors in vehicles with side air bags: Sitting too close to the side air bag modules or placing han ds on them is extremely dangerous.
Black plate (40,1) Do not modify the suspension: Modifying the vehicle suspension is dangerous. If the vehicle 's height or the suspension is modified, the vehicle will be unable to accurate ly detect a collision resulting in incorrect or unexpected air bag dep loyment and the possib ility of serious injuries.
Black plate (41,1) Supplemental Restraint System Components Driver/Passenger inflator s and air bags Crash sensor, and diagnostic module (SAS unit) Seat belt pretensioner and load limiting systems (pa.
Black plate (42,1) How the SRS Air Bags W ork Y our Mazda is equipped with the following types of SRS air bags. SRS air bags are designed to work together with the seat belts to help to reduce injuries durin g an accident. The SRS air bags are designed to provide further protection for passengers in addition to the seat belt functions.
Black plate (43,1) q Passenger Air Bag The passenger air bag is mounted in the passenger dashboard. The inflation mechanism for the passenger air bag is the same as the driver's air bag, as mentioned above. For more details about air bag deployment, refer to “ SRS Air Bag Depl oyment Criteria ” (page 2-34).
Black plate (44,1) q Side Air Bags í The side air bags are mounted in the outboard sides of the front seatbacks. When the air bag crash sensors detect a side imp act of greater than moderate force, the system inflates the side air bag only on the side in which the vehicle was hit.
Black plate (45,1) WARNING Never tamper with the air bag/ pretensioner systems and alw ays have an Authorized Mazda Dealer per form all servicing and repairs: Self-ser vicing or tampering with the systems is dangerous. An air bag/preten sioner could accidentally activa te or become disabled causing serious injur y or death.
Black plate (46,1) SRS Air Bag Deployment Criteria This chart indicates the applicable SRS equipment that will deploy dependi ng on the type of collision.
Black plate (47,1) Limitations to SRS Air Bag In severe collisions such as those described previ ously in “ SRS Air Bag Deployment Criteria ” , the applicable SRS air bag equipment will deploy . However, in some accidents, the equipment may not deploy depending on the type of coll ision and its severity .
Black plate (48,1) Roll-over 2-36 Essential Safety Equipment SRS Air Bags MX-5_8DG6-EA-13F_Edition1 Page48 Thursday , May 30 2013 10:49 AM Form No.8DG6-EA-13F.
Black plate (49,1) Driver and Passenger Occupant Classification System First, please read “ Suppleme ntal Restraint System (SRS) Precaut ions ” (page 2-25) carefully . q Driver Seat Slide Position Sensor Y our vehicle is equipped with a driver seat sli de position sensor as a part of the supplemental restraint syst em.
Black plate (50,1) Passenger air bag deactivation indicator light This indicator light illuminates to remind you that the passenger front and side air bags and seat belt pretensioner will not deploy during a collision. If the passenger weight sensors are normal, the indicator light illumi nates when the ignition is switched ON.
Black plate (51,1) WARNING Do not decrease the total seated weight on the pass enger seat: When an adult or large child sits on the passenger sea t, decreasing the total seated weight on the passenger seat required for air bag deploym ent is dangerous.
Black plate (52,1) CAUTION Ø To assure proper deployment of the front air bag and to prevent damage to the sensors in the seat bottoms : Ø Do not place sharp obje cts on the seat bottoms or leave heavy luggage on them. Ø Do not spill any liquids on the seats or under the seats.
Black plate (53,1) Monitoring and Maintenance q Constant Monitoring The following components of the air bag syst ems are monitored by a diagnostic syst em: l Crash sensors, and diagnostic module (SAS .
Black plate (54,1) WARNING Do not operate a vehicle with damaged air bag/ seat belt pretensioner system components: Expended or damaged air bag/seat belt pretension er system componen ts must be replaced after any collision which caused them to deploy or damage them.
Black plate (55,1) 3 Knowing Y our Mazda Explanation of basic operations and controls; opening/closing and adjustment of various parts. Advanced Keyless Entry and Start System .............................. .. 3-2 Advanced Keys í ....................
Black plate (56,1) Advanced Keys í The advanced keyless functions (advanc ed keyless entry and start system) enable the following operations while the advanced key is being carried (page 3-7). l Locking/unlocking the doors, and opening the trunk lid, without operating the key .
Black plate (57,1) Lock button Operation indicator light Auxiliary key Ke y code number plate Unlock button T runk button Panic b utton A code number is stamped on the plate attached to the key set; detach this plate and store it in a safe place (not in the vehicle) for use if you need to make a replacement key .
Black plate (58,1) CAUTION Ø Because the advanced key uses low-intensity radio waves, it may not funct ion correctly under the following conditi ons: Ø The advanced key is carried with communicatio n devices such as cellular phones. Ø The advanced key contacts or is covered by a meta l object.
Black plate (59,1) q Advanced Key Maintenance CAUTION Ø Make sure the battery is installed with the correct pole facin g upward. Battery leaka ge could occur if it is no t installed correctly.
Black plate (60,1) 3. Insert the small, flathead screwdriver into the gap between the cover and the transmitter, and then rotate the screwdriver to detach the cover . 4. Remove the battery cap, then remo ve the battery . 5. Insert a new battery with the positive pole facing up, and then cover the battery with the battery cap.
Black plate (61,1) CAUTION Ø Be careful not to allow the rubber ring shown in the figure to be scratched or damaged. Ø If the rubber ring detaches, reattach it before inser ting a new battery. Rubber ring q Service If you have a problem with the advanced keyless functions, consult an Authorized Mazda Dealer .
Black plate (62,1) Opening the trunk lid The operational range for openin g the trunk lid is an area of up to 80 cm (31 in) from the center of the trunk lid. Exterior transmitter Operational range Starting the engine The operational range for starting the engine includes nearly the entire cabin area.
Black plate (63,1) T o lock T o lock the doors, press the request switch. A beep sound will be heard once and the hazard warning lights will flash once. NOTE (W ithout theft-deterrent system) The hazar d warning lights will flash once to indicate that the doors are locked.
Black plate (64,1) NOTE l Confirm that both doors are secur ely locked. l Both doors cannot be locked when any door is open. l A beep sound is hear d for confirmation when the doors are locked/unlocked using the request switch. If you pr efer , the beep sound can be turned off.
Black plate (65,1) q Starting the Engine Ignition switch positions As there is no traditional key , some of the ignition switch functions are different.
Black plate (66,1) ON This is the normal running position after the engine is started. The warning lights (except brakes) should be inspe cted before the engine is started (page 5-42). NOTE When the ignition is switched ON, the sound of the fuel pump motor operating near the fuel tank can be heard.
Black plate (67,1) 5. (Manual transmission) Depress the clutch pedal all the way and shift into neutral. Keep the clutch pedal depressed while cranking the engine. (Automatic transmission) Put the vehicle in park (P). If you must restart the engine while the vehicle is moving, shift into neutral (N).
Black plate (68,1) 9. Switch the ignition from ACC to ST AR T and hold (up to 10 seconds at a time) until the engine starts. CAUTION Do not try the starter fo r more than 10 seconds at a time. If the engine stalls or fails to start, wait 10 sec onds before trying again.
Black plate (69,1) Operation Using Advanced Key Functions q Keyless Entry System This system uses the more traditional keyless entry butto ns to remotely lock and unlock the doors and opens the trunk lid, and opens the power windows. It can also help you signal for attention.
Black plate (70,1) NOTE l Both doors cannot be locked when either door is open. l Confirm that both doors ar e locked visually or audibly by use of the double click. Unlock button T o unlock the driver's door, press the unlock button. A beep will be heard twice and the hazard warning lights will flash twice.
Black plate (71,1) Declaration of Conformity Ke yless entry system Knowing Y our Mazda Advanced Keyless Entry and Start System 3-17 MX-5_8DG6-EA-13F_Edition1 Page71 Thursday , May 30 2013 10:50 AM Form No.
Black plate (72,1) q Auxiliary Key Function Use the auxiliary key stored in the advanced key in the event of a dead transmitter batte ry or malfunction.
Black plate (73,1) W arning and Beep Sounds q System Malfunction W arning Beep If any malfunction occurs in the advanced keyless function, the KEY warning light (red) in the instrum ent cluster illuminates continuously and beep sounds will be heard.
Black plate (74,1) l The ignition has not been switched off. l The auxiliary key is inserted into the ignition switch. q Advanced Key Battery Dead W arning When the ignition is switched to ACC or switched off from ON, the KEY indi cator light (green) flashes for approximately 30 seconds indicating that the remainin g battery power is low .
Black plate (75,1) Setting Change (Function Customization) The following function settings are possible. These sett ings can only be changed by an Authorized Mazda Dealer .
Black plate (76,1) When W arning Indicator/Beep is Activated Under the following conditions, warning beeps are heard and a warning/indicator ligh t in the instrument cluster illumi nates to notify the driver of improper operation of the advanced key to prevent theft of the vehicle (page 3-19).
Black plate (77,1) Keys (without Advanc ed Key) WARNING Do not leave the key in your vehicle with children and keep them in a place where your children will not find or play with them: Leaving children in a vehicle with the key is dangerous. This could resu lt in someone being badly injured or even killed.
Black plate (78,1) Key extend/retract method (Retractable type key) T o extend the key , press the release button. T o retract the key , rotate it into the holder while pressing the relea se button. Keyless Entry System (with Retractable T ype Key) í This system remotely locks and unlocks the doors, and opens the power windows.
Black plate (79,1) q T ransmitter Lock button Unlock button T runk button Panic b utton Operation indicator light NOTE The unlock button can be used to open the power windows. Refer to Opening the Power W indows from Outside (page 3-38). The operation indicator light flashes when the buttons are pressed.
Black plate (80,1) T runk button T o open the trunk, press the trunk button for more than 1 second. NOTE l (W ith power retractable hardtop) The trunk lid can only be opened when the power r etractable hardtop is fully opened/ closed. Open/close the power retractable har dtop completely befor e opening the trunk lid.
Black plate (81,1) 2. Insert a screwdriver into the slot and push the tab to remove the key from the transmitter . Ta b 3. Insert a screwdriver into the slot and gently pry open the transmitter . 4. Remove the battery . 5. Put in the new battery (CR1620 or equivalent) with the positive pole ( ) facing down.
Black plate (82,1) q Service If you have a problem with the keyless entry system, consult an Authori zed Mazda Dealer . If your transmitter is lost or stolen, consult an Authorized Mazda Dealer as soon as possible for a replacement and to make the lost or stolen transmitter inoperative.
Black plate (83,1) q Declaration of Conformity Ke yless entry system Knowing Y our Mazda Doors and Locks 3-29 MX-5_8DG6-EA-13F_Edition1 Page83 Thursday , May 30 2013 10:50 AM Form No.
Black plate (84,1) Door Locks WARNING Always take all child ren and pets with you or leave a responsible person with them: Leaving a child or a pet unattended in a parked vehicle is dangerous. In hot weather, temperatures inside a vehicle can become high enough to cause brain damage or even death.
Black plate (85,1) q Locking, Unlocking with T ransmitt er (with Retractable T ype Key) The doors can be locked/unlocked by operating the keyless entry system transmitter, refer to Keyless Entry System (page 3-24). q Locking, Unlocking with Door - Lock Knob T o lock any door from the inside, press the door-lock knob.
Black plate (86,1) q Power Door Locks í V ehicle lock-out prevention (With advanced key) The vehicle lock-out prevent ion feature prevents you from locking yourself out of the vehicle. Both doors will automatically unlock if they are locked using the power door locks with any door open.
Black plate (87,1) T runk Lid WARNING Never allow a person to ride in the trunk: Allowing a person to ride in the trunk is dangerous. In addition , the person in the trunk could be seriou sly injured or killed during sudden braking or a collis ion.
Black plate (88,1) CAUTION Do not open th e trunk while the power retractable har dtop is opening/closing. The power retractable hardto p and trunk lid mechanisms could be da maged.
Black plate (89,1) W ith the switch in the OFF position, the remote release button cannot be operated. T o open the trunk lid when the switch is in the OFF position, do one of the following: l Press the request switch on the trunk lid. l Press the trunk button on the transmitter .
Black plate (90,1) WARNING Close the trunk lid and do not allow children to play inside the vehicle: Leaving the trunk lid open or leaving children in the vehicle with the keys is dangerous. Children could open the trunk lid and climb inside resulting in possible injury or death from heat exposure.
Black plate (91,1) Power Windows The ignition must be switched ON for the power windows to operate. WARNING Make sure the opening is clear befor e closing a window: Closing power windo ws are dangerous. A perso n's hands, head, or even neck could be caught by the window and resul t in serious injur y or even death.
Black plate (92,1) q Operating the Driver's Side Power Window (T ype B) Normal opening/closi ng T o open the window to the desired position, lightly hold down the switch.
Black plate (93,1) Opening Because nobody likes getting into a very hot car , we have introduced a way to get a head start on cooling it, even before you put your seat belt s on and insert your key in the ignition.
Black plate (94,1) Fuel-Filler Lid and Cap WARNING When removing the fuel-filler cap, loosen the cap slightly and wait for any hissing to stop. Then remove it: Fuel spray is dangerous.
Black plate (95,1) T o close the fuel-filler cap, turn it clockwise until two or more clicks are heard. Close Open CAUTION Make sure the fuel-filler cap is tightened securely . The check engine light may illuminate when the cap is not tightened securely .
Black plate (96,1) 3. Grasp the support rod in the padded area and secure it in the support rod hole indicated by the arrow to hold the hood open. Clip Support rod q Closing the Hood 1. Check under the hood area to make certain all filler caps are in place and all loose items (e.
Black plate (97,1) Convertible T op (Soft T op) í W indshield header T op latch assembly T op storage area Con vertible top's handles Label (The label indicates the position where con vertible top is to be held when lowering or raising it.
Black plate (98,1) l Before lowering or raising the convertible top, stop in a safe place off the right-of-way and park on a level surface. l Make sure nothing is on the convertible top or near the back window when raising or lowering the co nvertible top.
Black plate (99,1) NOTE T o lower the convertible top from inside the vehicle, use the convertible top's handles. Con vertible top's handles 7. Continue to move the convert ible top rearward while press ing the rear glass lightly with your hand.
Black plate (100,1) 4. Pull the unlock lever outward to disengage the lock. Unlock lev er 5. Standing outside of the vehicle, hold the convertible top along the center edge and pull it towards the veh icle front. Center edge NOTE T o raise the convertible top fr om inside the vehicle, use the convertible top's handles.
Black plate (101,1) CAUTION Driving with the convertible top not fully locked could damage the convertible top. If the red indicator is visible on the lock release button, the convertible top is not locked. After locking the convertible top, verify that the red indicator is not visible.
Black plate (102,1) Convertible T op (Power Retractable Hardtop) í The power retractable hardtop opens/ closes electrically by operat ing switches in the vehicle. When opening/closing the hardt op, the hardtop, deck and window glass operate together .
Black plate (103,1) q Power Retractable Hardtop Precautions WARNING Always confirm that there are no people around the vehicle before operating the hardtop: If the hardtop were to operate unexp ectedly, it could result in an accide nt and serious injury from someone getting ca ught in the mechanism.
Black plate (104,1) l Before opening or closing the hardtop, stop in a safe place off the right-of-wa y and park on a level surface. l When opening the hardtop, make sure objects inside the vehicle are not blown away by the wind. l Secure all loose objects inside before driving with the hardtop down.
Black plate (105,1) q Opening the Power Retractable Hardtop 1. Park on a level surface off the right-of- way and firmly set the parking brake. 2. Put a vehicle with an autom atic transmission in Park (P), a manual transmission in Neutral. 3. Apply the parking brake with the brake pedal depressed.
Black plate (106,1) 9. The hardtop opens. 10. The hardtop retracts under the deck. 1 1. The deck closes. NOTE When the operation is finished, a beep sound is hear d and the operation indicator light turns off. q Closing the Power Retractable Hardtop 1.
Black plate (107,1) 6. The deck opens. NOTE If the windows ar e closed, the windows automatically open partially when the deck opens. 7. The hardtop comes out from under the deck. 8. The hardtop closes. 9. The deck closes. NOTE l When the operation is finished, a beep sound is hear d and the operation indicator light illuminates.
Black plate (108,1) 10. Move the top latch slowly to make sure the anchor engag es with the striker, then rotate the top latch to the lock position until a click sound is heard. Striker Anchor CAUTION Driving with the hardtop not fully locked could damage the hardto p.
Black plate (109,1) CAUTION Ø Do not drive the vehicle with the hardtop open half way. Ø Do not perfo rm the procedure in a strong wind as it could cause an unexpected accident. Ø Two adults are requ ired to per form the procedure, especially when lifting up the hardtop.
Black plate (1 10,1) NOTE l The gear units on both sides have to be unlocked to release the deck befor e it is raised manually . Because the deck is heavy , two adults ar e r equir ed to raise it. l The following describes the procedur e for the gear unit on one side.
Black plate (11 1,1) NOTE l After the bolt is clear of the hole, keep the Allen wr ench level while pulling it out with the bolt attached so as to pr event the bolt fr om hitting the vehicle and dr opping. l Bring the removed bolt to an Authorized Mazda Dealer .
Black plate (1 12,1) 13. Lift up the deck using two adults, one on each side of the vehicle, and open the deck completely . CAUTION Ø Lift the deck using two adult s. Doing it alone could result in injury or the deck lid mechanism being twisted which could dam age it.
Black plate (1 13,1) 2. Grasp the hardtop along the side and rear surfaces and lift it up enoug h to create a clearance behind the rear glass. 3. Grasp the hardtop along its side surface and the rear area of the rear glass, pull the hardtop towards the front of the vehicle, and completely close it.
Black plate (1 14,1) T o the outside of the vehicle Rope Links NOTE Always r oute the one end of the r ope to the inside of the vehicle. If it is not inside the vehicle, it will be difficult to service the har dtop at an Authorized Mazda Dealer . 3. Do the same procedu re on the other side.
Black plate (1 15,1) NOTE Open the trunk using the key . The r emote r elease button, advanced keyless entry function, and the keyless entry system do not operate when this emergency pr ocedure is done. 8. Tie off the other side rope the same way . 9.
Black plate (1 16,1) q When W arning Indicator/Beep is Activated If an improper operation is performed or a system malfunction has occurred, the indicator light or a warning beep is activated to notify the user of improper operation or a system malfunction.
Black plate (1 17,1) Immobilizer System (with Advanced Key) The immobilizer system allows the engine to start only with an advanced key the system recognizes. If someone attempts to start the engine with an unrecognized advanced key , the engine will not start, thereby helping to prevent the theft of your vehicle.
Black plate (1 18,1) Ø Devices for electronic purchases, or security passage which touch or come near the auxiliary key. NOTE l The advanced keys (including auxiliary key) carry a unique electr onic code. For this r eason, and to assure your safety , obtaining a r eplacement advanced key (including auxiliary key) requir es some waiting time.
Black plate (1 19,1) Declaration of Conformity Knowing Y our Mazda Security System 3-65 MX-5_8DG6-EA-13F_Edition1 Page1 19 Thursday , May 30 2013 10:50 AM Form No.
Black plate (120,1) q Operation Arming The system is armed when the ignitio n is switched from ON to ACC or OFF . The security indicator ligh t in the instrument cluster flashes every two seconds until the system is disarmed. Disarming The system is disarmed when the ignition is switched ON wi th the registered advanced key .
Black plate (121,1) q Modification and Add-On Equipment Mazda cannot guarantee the immobilizer system's operation if the system has been modified or if any add-on equipment has been installed. CAUTION To avoid damage to your vehicle, do not modify the system or install any add-on equipment to the immobilizer system or th e vehicle.
Black plate (122,1) CAUTION When starting the engine do not allow the following, as the engine may not start due to the electronic signal from the ignition key not being transmitted correctly. Ø A key ring rests on the key grip. Ø Metal parts of other keys or metal objects touch the key grip.
Black plate (123,1) Declaration of Conformity Knowing Y our Mazda Security System 3-69 MX-5_8DG6-EA-13F_Edition1 Page123 Thursday , May 30 2013 10:50 AM Form No.
Black plate (124,1) q Operation Arming The system is armed when the ignitio n is switched from ON to ACC or OFF . The security indicator light in the instrument cluster flashes every two seconds until the system is disarmed. Disarming The system is disarmed when the ignition is switched ON wi th the correct ignition key .
Black plate (125,1) Theft-Deterrent System í If the theft deterrent system detects an inappropriate entry into the vehicle, which could result in the vehicle or its contents being stolen, the alarm alerts the surrounding area of an abnormality by sounding the horn and flas hing the hazard warning lights.
Black plate (126,1) NOTE Locking the doors with the inside door-lock knob will not arm the system. q T o T urn off an Armed System An armed system can be turned off by any one of the following methods: l Unlock a door with the key . l Press the unlock button on the keyless entry system transmitter .
Black plate (127,1) Steering Wheel WARNING Never adjust the steering wheel while the vehicle is moving: Adjusting the steering wheel while the vehicle is moving is dangerous. Moving it can very easily cause the driver to abrup tly turn to the lef t or right.
Black plate (128,1) 2. Depress the mirror switch in the appropriate direction. Mirror switch Selector switch Outside mirror After adjusting the mirror, lock the control by placing the selec tor switch in the center position. Folding the mirror Fold the outside mirror rearward until it is flush with the vehicle.
Black plate (129,1) Reducing glare from headlights Manual day/night mirror Push the day/night lever forward for day driving. Pull it back to reduce glare of headlights from cars at the rear .
Black plate (130,1) 3-76 MX-5_8DG6-EA-13F_Edition1 Page130 Thursday , May 30 2013 10:50 AM Form No.8DG6-EA-13F.
Black plate (131,1) 4 Before Driving Y our Mazda Important information about driving your Mazda. Fuel and Engine Exhaust Precautions ........ ................................ 4-2 Fuel Requirements .............................. .......................
Black plate (132,1) Fuel Requirements V ehicles wi th catalytic convert ers or oxygen sensors must use ONL Y UNLEADED FUEL , which will reduce exhaust emissions and keep spark plug fouling to a minimum. Y our Mazda will perform best with fuel listed in the table.
Black plate (133,1) Emission Control System Y our vehicle is equipped with an emission con trol system (the catalytic convert er is part of this system) that enables your vehicl e to comply with existing exhaust emi ssions requirements.
Black plate (134,1) Engine Exhaust (Carbon Monoxide) WARNING Do not drive your vehicle if you smell exhaust gas inside the vehicle: Engine exhaust gas is dangerous. This gas contain s carbon monoxide (CO), which is colorless, odorless, and pois onous.
Black plate (135,1) Before Getting In l Be sure the windows, outside mirrors, and outside lights are clean. l Inspect inflation press ures and condition of tires. l Look under the vehicl e for any sign of fluid leaks. l If you plan to back up, make sure nothing is in your way .
Black plate (136,1) Break-In Period No special break-in is necessary , but a few precautions in the first 1, 000 km (600 miles) may add to the performance, economy , and life of your Mazda. l Do not race the engine. l Do not maintain one const ant speed, either slow or fast, for a long period of time.
Black plate (137,1) Hazardous Driving WARNING Be extremely careful if it is necessar y to downshift on slipper y sur faces: Downshifting into lower gear while driving on slippery surface s is dangerous. The sudden change in tire speed could ca use the tires to skid.
Black plate (138,1) Floor Mat WARNING Make sure the floor mats are hooked on the retention pins to prevent them from bunching up under the foot pedals: Using a floor mat that is not sec ured is dangerous as it will inter fere with the accelerator and brake pedal operation, which could result in an accident.
Black plate (139,1) Winter Driving l Carry emergency gear , including tire chains, window scraper, flares, a small shovel, jumper cables, and a small bag of sand or salt. Ask an Authorized Mazda Deal er to perform the following precautions: l Have the proper ratio of anti freeze in the radiator .
Black plate (140,1) NOTE If your vehicle is equipped with the tire pr essur e monitoring system, the system may not function corr ectly when using tires with steel wire r einforcement in the sidewalls (page 5-34). q Tir e Chains Check local regulations before using tire chains.
Black plate (141,1) Overloading WARNING Be careful not to overload your vehicle: The gross axle weight rating (GAWR) and the gross vehicle weight rating (GV WR) of your vehicle are on the Motor Vehicle Safety Standard Label on the driver's doo r frame.
Black plate (142,1) Driving on Uneven Road Y our vehicle's suspension and underbody can be damaged if driven on rough/uneven roads or over speed bumps at excessive speeds. Use care and reduce speed when traveling on rough/uneven roads or over speed bumps.
Black plate (143,1) T railer T owing Y our Mazda is not designed for tow ing. Never tow a trailer with your Mazda. Before Driving Y our Mazda T owing 4-13 MX-5_8DG6-EA-13F_Edition1 Page143 Thursday , May 30 2013 10:50 AM Form No.
Black plate (144,1) 4-14 MX-5_8DG6-EA-13F_Edition1 Page144 Thursday , May 30 2013 10:50 AM Form No.8DG6-EA-13F.
Black plate (145,1) 5 Driving Y our Mazda Explanation of instruments and controls. Starting and Driving ............... ...................................................... 5-2 Ignition Switch .......................................... .............
Black plate (146,1) Ignition Switch Auxiliary key (with advanced key) NOTE When starting the engine using the advanced key , refer to Starting the Engine (page 3-1 1). When starting the engine with the auxiliary key , perform the following procedure. 1.
Black plate (147,1) WARNING Do not stop the engine while the vehicle is moving: Stopping the engine while the vehicle is moving for any reaso n other than in an emergency is dangerous.
Black plate (148,1) Starting the Engine NOTE Engine-starting is contr olled by the spark ignition system. This system meets all Canadian Interference- Causing Equipment Standar d r equir ements r egulating the impulse electrical field strength of radio noise.
Black plate (149,1) T urning the Engine Off WARNING Do not stop the engine while the vehicle is moving: Stopping the engine while the vehicle is moving for any reaso n other than in an emergency is dangerous.
Black plate (150,1) WARNING Do not coast with the engin e stalled or turned off, find a safe place to stop: Coasting with the engine stalled or turned off is dangerous. Braking will require more effort, and the brake's power-assist could be depleted if you pump the brake.
Black plate (151,1) q Parking Brake WARNING Before leaving the driver's seat, alw ays switch the ignition to OFF, set the parking brake and ma ke sure the shift lever is in P (automa tic transmis.
Black plate (152,1) q Brake System W arning Light This warning has the following functions: Parking brake warnin g/W arning light inspection The light illuminates when the parking brake is applied with the igni tion switched to ST AR T or ON. It turns off when the parking brake is fully relea sed.
Black plate (153,1) NOTE l Braking distances may be longer on loose surfaces (snow or gravel, for example) which usually have a har d foundation. A vehicle with a normal braking system may r equir e less distance to stop under these conditions because the tires will build up a wedge of surface layer when the wheels skid.
Black plate (154,1) q Brake Assist (with DSC vehicles) During emergency braking situations when it is necessary to depress the brake pedal with greater force, the brake assist system provides braking assistance, thus enhancing braking performanc e. When the brake pedal is depressed hard or depressed more quickly , the brakes apply more firmly .
Black plate (155,1) Manual T ransmission Operation q Manual T ransmission Shift Pattern 5-speed transmission 6-speed transmission Neutral position Neutral position The vehicle is equipped with eithe r a 5- speed or 6-speed manual transmission. The shift pattern for each is shown above.
Black plate (156,1) CAUTION Ø Keep your foot off the clutch pedal except when shifting gears. Also, do not use the clutch to hold the vehicle on an upgrade. Riding the clutch will cause needle ss clutch wear and damage. Ø Do not apply any excessive lateral force to the gear lever when changing from 5th to 4th gear.
Black plate (157,1) Automatic T ransmission Controls Indicates the shift lev er can be shifted freely into any position. V arious Lockouts: Indicates that you must depress the brake pedal to shift (The ignition must be switched to ACC or ON).
Black plate (158,1) q T ransmission Ranges The shift lever must be in P or N to operate the starter . P (Park) P locks the transmissio n and prevents the rear wheels from rotating.
Black plate (159,1) q Active Adaptive Shift (AAS) Active Adaptive Shift (AAS ) automatically controls the transmission shift points to best suit the road conditions and driver input.
Black plate (160,1) Indicators Manual shift mode indicator In manual shift mode, the “ M ” of the shift position indicator in the inst rument panel illuminates.
Black plate (161,1) NOTE l When driving slowly , the gears may not shift up. l In manual shift mode, gears do not shift up automatically . Do not run the engine with the tachometer needle in the RED ZONE. If the tachometer needle enters the RED ZONE, you may feel engine-braking.
Black plate (162,1) NOTE l When driving at high speeds, the gear may not shift down. l During deceleration, the gear may automatically shift down depending on vehicle speed. l When depr essing the accelerator fully, the transmission will shift to a lower gear , depending on vehicle speed (Except M2 → M1).
Black plate (163,1) Shift gear (shifting) speed limit For each gear position while in the manual mode, the speed limit is set as follows: When the selector lever is operated within the range of the speed limit, the gear is shifted. Shift up The gear does not shift up while the vehicle speed is lower than the speed limit.
Black plate (164,1) Recommendations for shift ing Upshifting For normal acceleration and cruising, we recommend these shift point s. Gear V ehicle speed M1 to M2 24 km/h (15 mph) M2 to M3 40 km/h (25 .
Black plate (165,1) NOTE Shifting up and down while in dir ect mode may not be possible depending on the vehicle speed. In addition, because dir ect mode is canceled (r eleased) depending on the rate .
Black plate (166,1) Power Steering Power steering is only operabl e when the engine is running. If the engine is off or if the power steering system is inoperable, you can still steer, but it requires more physical effort. If the steering feels stiffer than u sual during normal driving, consult an Authorized Mazda Dealer .
Black plate (167,1) q Activation/Deactivation T o activate the system, press the ON/OFF switch. The cruise main indicator ligh t illuminates. T o deactivate the system, press the switch again.
Black plate (168,1) q T o Increase Cruising Speed Follow either of these procedures. T o increase speed using cruise control switch Press up the cruise control RES/ + switch and hold it. Y our vehicle will acceler ate. Release the switch at the speed you want.
Black plate (169,1) Y our vehicle has a tap-down feature that allows you to decrease your current speed in decrements of 1.6 km/h (1 mph) by a momentary tap of the cruise control SET/ - switch. Multiple taps will decrease your vehicle speed 1.6 km/h (1 mph) for each tap.
Black plate (170,1) T raction Control System (TCS) í The T raction Control System (TCS) enhances traction and safety by controlling engine torque and braking. When the TCS detects driving wheel slippage, it lowers engine torqu e and operates the brakes to prevent loss of traction.
Black plate (171,1) Dynamic Stability Control (DSC) í The Dynamic Stability Control (DSC) automatically controls braki ng and engine torque in conjunction with syst ems such as ABS and TCS to he lp control side slip when driving on slippery surfa ces, or during sudden or evasi ve maneuvering, enhancing vehicle safety .
Black plate (172,1) q DSC OFF Indicator Light This indicator light stays on for a few seconds when the ignition is switched ON. It also illuminates when the DSC OFF switch is pressed and TCS/ DSC is switched off (page 5-28). If the light stays on when the TCS/DSC is not switched off, take your vehicle to an Authorized Mazda Dealer.
Black plate (173,1) NOTE l When DSC is on and you attempt to fr ee the vehicle when it is stuck, or drive it out of fr eshly fallen snow , the TCS (part of the DSC system) will activate. Depressing the accelerator will not incr ease engine power and freeing the vehicle may be difficult.
Black plate (174,1) Tir e Pressur e Monitoring System í The tire pressure monitoring system (TPMS) monitors the pressure for each tire. If tire pressure is too low in one or more tires, the system will inform the driver via the warning light in the instrument panel and by the warning beep sound.
Black plate (175,1) CAUTION Each tire, including the spare (if provided), shou ld be checked monthly when cold and inflated to the inflation pressure recomm ended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.
Black plate (176,1) q Tir e Pressure Monitoring System W arning Light This warning light illuminates for a few seconds when the ignition is switched ON. Thereafter, the warning light illuminates and a beep is heard when tire pressure is too low in one or more tires, and flashes when there is a system malfunction.
Black plate (177,1) Adjust the tire pressure to the correct tire pressure. Refer to the specification charts (page 10-7). CAUTION When replacing/repai ring the tires or wheels or both, have the work done by an Authorized Mazda Deal er, or the tire pressure sensors may be damaged.
Black plate (178,1) If the warning light illuminate s again even after the tire pressures are adjusted, there may be a tire puncture. Refer to V ehicle with run-flat tires on page 7-3.
Black plate (179,1) q Tir es and Wheels CAUTION When inspecting or adjusting the tire air pressures, do not apply excessive force to the stem part of the wheel unit.
Black plate (180,1) l A new tire pressure sensor is installed to a new wheel. NOTE l The tire pr essure sensor ID signal code must be r egister ed when a new tir e pressur e sensor is purchased. For pur chase of a tire pr essur e sensor and registration of the tire pr essur e sensor ID signal code, consult an Authorized Mazda Dealer .
Black plate (181,1) Meters and Gauges Speedometer .................................................. ................................................. ... page 5-38 Odometer, T rip Meter, A verage Fuel Economy Di splay , Out side T emperature Display and Selector .
Black plate (182,1) q Speedometer The speedometer indicates the speed of the vehicle. q Odometer , T rip Meter , A verage Fuel Economy Display , Outside T emperature Display and Selector The ignition must be switched ON.
Black plate (183,1) The trip meter records the tota l distance the vehicle is driven until the meter is again reset. Return it to “ 0.0 ” by holding the selector depressed for 1 second or more. Use this meter to measure trip distances and to compu te fuel consumption.
Black plate (184,1) Automatic T ransmission Red zone CAUTION Do not run the engine with the tachometer needle in the RED Z ONE. This may cause severe engin e damage. q Engine Coolant T emperature Gauge The engine coolant temperat ure gauge shows the temperature of the engine coolant.
Black plate (185,1) q Engine Oil Pressure Gauge Normal range Engine oil pressure is normal when the engine oil pressure gauge needle points within the normal range. If the needle on the gauge doesn't move after starting the engine, follow steps 1 through 3.
Black plate (186,1) W arning/Indicator Lights W arning/Indicator lights will appear in any of the highlighted areas Signal W arning/Indicator Lights Page Brake System W arning Light 5-44 Malfunction W.
Black plate (187,1) Signal W arning/Indicator Lights Page Seat Belt W arning Light 5-47 Door-Ajar W arning Light 5-47 Automatic Transmis sion W arning Light 5-47 T ire Pressure Monitoring System W arn.
Black plate (188,1) q Brake System W arning Light This warning has the following functions: Parking brake warnin g/W arning light inspection The light illuminates when the parking brake is applied with the igni tion switched to ST AR T or ON. It turns off when the parking brake is fully relea sed.
Black plate (189,1) q ABS W arning Light The warning light stays on for a few seconds when the ignition is switched ON. If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will funct ion normally as if the vehicle had no ABS.
Black plate (190,1) q Charging System W arning Light This warning light illuminates when the ignition is switched ON and turns off when the engine is started. If the warning light illuminate s while driving, it indicates a malfunction of the alternator or of the charging system.
Black plate (191,1) WARNING Never tampe r with the air bag/ pretensioner systems and always have an Authorized Mazda Dealer per form all servicing and repa irs: Self-ser vicing or tampering with the systems is dangerous. An air bag/ pretensioner could accide ntally activate or become disabled causing serious injury or death.
Black plate (192,1) q Tir e Pressure Monitoring System (TPMS) W arning Light í This warning light illuminates for a few seconds when the ignition is switched ON. Thereafter, the warning light illuminates and a beep is heard when tire pressure is too low in one or more tires, and flashes when there is a system malfunction.
Black plate (193,1) Adjust the tire pressure to the correct tire pressure. Refer to the specification charts (page 10-7). CAUTION When replacing/repai ring the tires or wheels or both, have the work done by an Authorized Mazda Deal er, or the tire pressure sensors may be damaged.
Black plate (194,1) If the warning light illuminate s again even after the tire pressures are adjusted, there may be a tire puncture. Refer to V ehicle with run-flat tires on page 7-3.
Black plate (195,1) WARNING Do not drive the vehicle with the KEY warning light illumina ted: If the KEY warnin g light remains illuminated, do not continue to drive using the advanced key system. Park the vehicle in a safe place and use the auxiliary key to continue driving the vehicle.
Black plate (196,1) NOTE The advanced key can be set so that the KEY indicator light (green) does not flash even if the battery power is low . Refer to Setting Change (Function Customization) on page 3-21.
Black plate (197,1) Gear position indicator The gear position indi cator displays the gear in use while in either manual shift or direct mode. q TCS/DSC Indicator Light í This indicator light stays on for a few seconds when the ignition is switched ON.
Black plate (198,1) q Cruise Main Indicator Light (Amber)/Cruise Set Indicator Light (Green) í The indicator ligh t has two colors. Cruise Main Indicator Light (Amber) The indicator light illu minates amber when the ON/OFF switch is pressed and the cruise control system is activated.
Black plate (199,1) q Tir e Inflation Pressure W arning Beep í The warning beep sound will be heard for about 3 seconds if the tire pressures decrease. If the tire pressure decreas es extremely , a beep sound will be heard for approximately 30 seconds.
Black plate (200,1) Lighting Control q Headlights T urn the headlight switch to turn the headlights, other exter ior lights and dashboard illumination on or off. NOTE T o prevent dischar ging the battery , do not leave the lights on while the engine is off unless safety r equir es them.
Black plate (201,1) q Lights-On Reminder If lights are on and the key is removed from the ignition switch, a continuous beep sound will be heard when the driver's door is opened.
Black plate (202,1) T urn and Lane-Change Signals T urn Signals Move the signal lever down (for a left turn) or up (for a right turn) to the stop position. The signal will self -cancel after the turn is completed. If the indicator light continues to flash after a turn, manually retur n the lever to its original position .
Black plate (203,1) Windshield Wipers and W asher The ignition must be switched ON. WARNING Use only windshield washer fluid or plain water in the reservoir: Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibili ty, and could result in an accide nt.
Black plate (204,1) q Windshield W asher Pull the lever toward you and hold it to spray washer fluid. OFF W asher NOTE W ith the wiper lever in the OFF or INT position, the wipers will operate continuously until the lever is released. If the washer does not work, inspect the fluid level (page 8-25).
Black plate (205,1) Horn T o sound the horn, press the mark on the steering wheel. Hazard W arning Flasher The hazard warning lights shoul d always be used when you stop on or near a roadway in an emergency . The hazard warning lights war n other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Black plate (206,1) HomeLink Wireless Contr ol System í There are two types of HomeLink Wireless Control systems; type A and B. Check the indication on the backside of the rearview mirror and the description corresponding to your vehicle.
Black plate (207,1) WARNING Do not use the HomeLink system with any garage door opener that lacks the safety stop and reverse feature: Using the HomeLink system with any garage door opener that lac ks the safety stop and reverse feature as required by federal safety standards is dangerous.
Black plate (208,1) The HomeLink system provi des 3 buttons which can be individually selected and programmed using the transmitters for current, on-market devices as follows: 1.
Black plate (209,1) Gate operator/Canadian Programming Canadian radio-freque ncy laws require transmitter signals to “ time-out ” (or quit) after several seconds of transmission ― which may not be long enough for HomeLink to pick up the signa l during programming.
Black plate (210,1) The HomeLink system repla ces up to 3 hand-held transmitters with a single built- in component in the auto-dimming mirror . Pressing the HomeLink button on the auto-dimming mir ror activates garage doors, gates and other devices surrounding your home.
Black plate (211,1) NOTE FCC ID: NZLOBIHL3 CANADA:41 12A-OBIHL3 This device complies with FCC rules part 15. Operation is subject to the following conditions: 1- This device may not cause any harmful interference and 2- This device must accept any interfer ence that may be received including interfer ence that may cause undesired operation.
Black plate (212,1) 5. Press and hold the just-tr ained HomeLink button and observe the indicator light. If the indicator ligh t stays on constantly , programming is complete and your device should activate when the HomeLink button is pressed and relea sed.
Black plate (213,1) Operating the HomeLink System Press the programmed HomeLink button to operate a programmed device. The code will continue being transmitted for a maximum of 20 seconds. Reprogramming the HomeLink system T o program a device to HomeLink using a HomeLink button previo usly trained, follow these steps: 1.
Black plate (214,1) 5-70 MX-5_8DG6-EA-13F_Edition1 Page214 Thursday , May 30 2013 10:51 AM Form No.8DG6-EA-13F.
Black plate (215,1) 6 Interior Comfort Use of various features for drive comfort, including air-conditioning and audio system. Climate Control System ............................................................. .. 6-2 Operating Tips .................
Black plate (216,1) Operating Tips q Operating the Climate Control System Operate the climate control system with the engine running. NOTE T o prevent the battery fr om being discharged, do not leave the fan contr ol dial on for a long period of time with the ignition switched ON when the engine is not running.
Black plate (217,1) V ent Operation Button q Adjusting the V ents Directing airflow Y ou can direct air flow by rotating the vent. Opening/closing vents The two outside vents can be opened and closed with center button. NOTE When using the air conditioner , mist may come out fr om the vents.
Black plate (218,1) q Selecting the Airflow Mode Y ou will feel more comfortable by using the OPEN MODE when opening the roof. Dashboard V ents Floor V ents Defroster and Floor V ents Defroster V ents.
Black plate (219,1) T ypes of the Climate Control System Manual type and automatic type climate control systems are explained separately . Check your vehicle's climate control type and read the appropriate pages. Manual T ype ....................
Black plate (220,1) Manual T ype í Mode selector dial Temperature control dial Fan control dial Air intake selector Rear window defroster switch *A/C switch *Some models q Control Switches T emperature control dial Hot Cold This dial controls tem perature.
Black plate (221,1) T urn the dial to adjust to the desired fan speed. T urning the dial clockwi se increases the fan speed. T urning the dial countercloc kwise decreases the fan speed. Mode selector dial T urn the mode selector dial to select airflow mode (page 6-4).
Black plate (222,1) WARNING Do not use the recirculated air mode in cold or rainy weather: Using the recirculated air mode in cold or rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, wh ich could lead to a serious accident.
Black plate (223,1) q V entilation 1. Set the mode selector dial to the or position. 2. Set the air intake selector to the outside air mode. 3. Set the temperature control dial to the desired position. 4. Set the fan control dial to the desired speed.
Black plate (224,1) Automatic T ype í Mode selector dial Temperature control dial Fan control dial Air intake selector Rear window defroster switch A/C switch T ype A Mode selector dial Temperature control dial Fan control dial Air intake selector Rear window defroster switch A/C switch T ype B 6-10 Interior Comfort í Some models.
Black plate (225,1) q Control Switches T emperature control dial Hot Cold This dial controls tem perature. Turn it clockwise for hot and counterclockwise for cold. NOTE l T urn the dial completely left to set the temperature to maximum cooling, and completely right for maximum heating.
Black plate (226,1) W ith the fan control dial ON, press the A/C switch to select the air conditioning (cooling/dehumidifying funct ions) on or off. NOTE The air conditioner may not function when the outside temperatur e appr oaches 0 °C(32 °F). Air intake selector Outside or recirculated air position s can be selected.
Black plate (227,1) WARNING Set the temperature control to hot or warm position when using the position: Using the position with the temperature control set to the cold position is dangerous as it will cause the outside of the windshield to fog up. Your vision will be hamper ed, which could lead to a serious accident.
Black plate (228,1) Antenna q AM/FM Radio Antenna T o remove the antenn a, turn it counterclockwise. T o install the antenna, turn it clockw ise. Make sure the antenna is securely installed. Remov e Install CAUTION To prevent damage to the antenna, remove it before entering a car wash facility or passing beneath a low overhead clearance.
Black plate (229,1) Operating Tips for Audio System WARNING Do not adjust the audio control switches while driving the vehicle: Adjusting the audio while driving the vehicle is dangerou s as it could distract your attention from the vehicle operation which could lead to a serious accident .
Black plate (230,1) Signals from an FM transmitter are similar to beams of light because they do not bend around corners, but they do reflect. Unlike AM signals, FM signa ls cannot travel beyond the horizon. Therefor e, FM stations cannot be received at the great distances possible wi th AM reception.
Black plate (231,1) Strong signal noise This occurs very close to a transmitter tower . The broadcast signals are extremely strong, so the result is noise and sound breakup at the radio receiver .
Black plate (232,1) l The CD revolves at high speed within the unit. Defective (cracked or badly bent) CDs should never be used. l Do not use non-conventi onal discs such as heart-shaped, octagonal discs, etc. The disc may not eject resul ting in a malfunction.
Black plate (233,1) l The CD player/In-dash CD changer has been designed to play CDs bearing the identification logo as shown below . No other discs can be played. l Use discs that have been legitimately produced. If illegally-copied discs such as pirated discs are used, the system may not operate proper ly .
Black plate (234,1) l Completely read the instruct ion manual and cautions for CD-R/ CD-R Ws. l Do not use discs with cell ophane tape adhering, partially peeled off labels, or adhesive material exuding from the edges of the CD label. Also, do not use discs with a comm ercially-available CD-R label affixed.
Black plate (235,1) About folders an d files l The arrangement and playing order of a recorded disc containing MP3 files is as follows: 05 06 01 02 04 03 1 5 4 2 3 Folder No. Lev el1 Level2 Lev el3 Le vel4 Playback may not occur in the abov e hierarchy depending on the audio unit.
Black plate (236,1) l This unit can only display English (including numerals) one-byt e characters. Use only Eng lish (including numerals) one-byte characters when inputting ID3 tags. T wo-byte charact ers and some special symbols cannot be displayed.
Black plate (237,1) Playable WMA file specificat ion CD-R and CD-R W including WMA files can be played with this unit. Discs which conform to the follow ing formats can be played. Playable WMA files are as follow s: Item Content Specification W indows Media Audio V ersion 7.
Black plate (238,1) MEMO 6-24 MX-5_8DG6-EA-13F_Edition1 Page238 Thursday , May 30 2013 10:51 AM Form No.8DG6-EA-13F.
Black plate (239,1) Audio Set CD player In-Dash CD Changer Power/V olume/Sound Controls ...................................................... ........................ page 6-26 Clock ........................................................... .......
Black plate (240,1) q Power/V olume/Sound Controls Audio control dial Power/V olume dial Power ON/OFF Switch the ignitio n to ACC or ON. Press the power/volume dial to turn the audio system on. Press the power/volume dial again to turn the audio system off.
Black plate (241,1) Standard audio-equipped model * * Bose Sound System-equipped model * * * Depe nding on the mode selec ted, the indication changes. 2.
Black plate (242,1) NOTE l Depending on the type of audio unit, the or der in which the functions appear differs. l About 5 seconds after selecting any mode, the volume function will be automatically selected. T o reset bass, tr eble, fade, and balance, pr ess the audio contr ol dial for 2 seconds.
Black plate (243,1) The system is also equipped to optimally adjust the acoustic charact eristics automatically whi le the roof is open or closed. The acoustic adjustment occurs with the lock/unlock operation of the top latch on the roof, and while the adjustment is being done, the audio is muted for about 1.
Black plate (244,1) q Clock Display Minute set button Hour set button Clock button Audio control dial Setting the time The clock can be set at any time when the ignition is switched to ACC or ON. 1. T o adjust the time, press the clock button ( ) for about 2 seconds until a beep is heard.
Black plate (245,1) MEMO 6-31 MX-5_8DG6-EA-13F_Edition1 Page245 Thursday , May 30 2013 10:51 AM Form No.8DG6-EA-13F.
Black plate (246,1) q Operating the Radio Band selector button Seek tuning buttons Scan button Display Auto memory button Channel preset buttons Channel preset buttons Manual tuning dial Radio ON Press a band selector button ( )t o turn the radio on.
Black plate (247,1) NOTE If you continue to press and hold the button, the fr equency will continue changing without stopping. Scan tuning Press the scan button ( )t o automatically sample strong stations . Scanning stops at each station for about 5 seconds.
Black plate (248,1) q Operating the Satellite Radio í Band selector button Seek tuning buttons Scan button Instant replay button Display T ext b utton Category b uttons Electronic serial number butto.
Black plate (249,1) NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide r easonable pr otection against harmful interference in a r esidential installation.
Black plate (250,1) SIRIUS service uses an ID code to identify your radio. This code is needed to activate SIRIUS service, and report any problems. T o activate you SIRIUS radio tuner, call a SIRIUS customer servi ce specialist at 1- 888-539-7474 or you can visit SIRIUS online at www.
Black plate (251,1) “ UPDA TING xx% ” is displayed when the SIRIUS channel map is changed. If the unit is initialized or the user contract content is changed, “ UPDA TING ” is displayed. Updating cou ld take as long as three minutes depending on the geographical area.
Black plate (252,1) (Programming with “ text ” display (e.g. channel name)) 1. Select the desir ed channel to be programmed. At this point, the following is displayed: [SR (bank number) (selected text (e.g. channel name))] 2. Keep pressing the channel preset button for 1.
Black plate (253,1) Scan tuning Press the scan button ( )t o automatically sample stations. Sc anning stops at each station for about five seconds. T o hold a station, press the scan button ( ) again during this interval.
Black plate (254,1) l If there is no channel name, “ NO TITLE ” is displayed. (Category name display) l When the text button ( )i s pressed while in channel name display mode, it changes to the catego ry name display mode. l There are short (eight fixed characters) and long names for the category name.
Black plate (255,1) l T o display the rest of the characters of the composer's name, press and hold the text butto n ( ). The display scrolls the next ten characters. Press and hold the text button ( ) again after the last ten characters have been displayed to return to the beginning of the title.
Black plate (256,1) (Master code input determination) 5. Determine the mast er code which has been input by p ressing the scan butt on ( ). 6. “ PIN CLEARED ” appears which indicates that the master code input has been completed. 7. The ID code is set to the default [0000] and the initialization proces s is completed.
Black plate (257,1) 7. If it matches with the previously registered code, “ ENTER PIN ” appears again and it switches to code input mode. 8. “ SR1 - - - - ” appears, and it is ready for input of the new ID code. (New ID code inp ut) 9. Input the new ID code using channel preset buttons 1-4.
Black plate (258,1) NOTE l If an ID code is not input for ten seconds, “ Err ” is displayed and it r eturns to the former display . l Channel pr eset buttons 1, 2, 3, 4 and the scan button ( ) ar e used for input of the ID code. Buttons 5 and 6 cannot be used.
Black plate (259,1) MEMO 6-45 MX-5_8DG6-EA-13F_Edition1 Page259 Thursday , May 30 2013 10:51 AM Form No.8DG6-EA-13F.
Black plate (260,1) q Operating the Compact Disc (CD) Player CD play button Display Repeat button CD eject button Play/Pause b utton Random button Folder up b utton CD slot Load button Folder do wn bu.
Black plate (261,1) Fast-forward/Reverse Press and hold the fast-forward button ( ) to advance through a track at high speed. Press and hold the revers e button ( )t o reverse through a track at high speed. T rack search Press the track up button ( ) once to skip forward to the beginning of the next track.
Black plate (262,1) During MP3/WMA CD playb ack (Folder random) 1. Press the random button ( ) during playback to play the tracks in the folder randomly . After “ FOLDER RDM ” is displayed, “ RDM ” is displayed. 2. T o cancel the random playback, press the button again after 3 seconds.
Black plate (263,1) NOTE The displayable number of characters is limited. If the number of characters, including the file extension (.mp3/.wma), exceeds 32 characters, it may not be fully displayed. Message display If “ CHECK CD ” is displayed, it means that there is some CD malfunction.
Black plate (264,1) q Operating the In-Dash CD Changer Disc up/Folder up b utton T rack down/Re verse button Channel preset buttons T ext b utton Scan button Random button Disc down/F older down butto.
Black plate (265,1) 2. Press the channel preset button for the desired tray number while “ W AIT ” is displayed. 3. When “ IN ” is displayed, inser t the CD. NOTE The CD cannot be inserted to the desir ed tray number if the number is already occupied.
Black plate (266,1) T rack search Press the track up button ( ) once to skip forward to the beginning of the next track. Press the track down button ( ) once to skip back to the beginn ing of the current track. Disc search During music CD playback T o change the disc, press the DISC button ( or ) during playback.
Black plate (267,1) During MP3/WMA CD playb ack (Folder random) 1. Press the random button ( ) during playback to play the tracks in the folder randomly . After “ FOLDER RDM ” is displayed, “ RDM ” is displayed. 2. T o cancel the random playback, press the button again after 3 seconds.
Black plate (268,1) NOTE The displayable number of characters is limited. If the number of characters, including the file extension (.mp3/.wma), exceeds 32 characters, it may not be fully displayed. Message display If “ CHECK CD ” is displayed, it means that there is some CD malfunction.
Black plate (269,1) q Error Indications If you see an error indication on the display , find the cause in the chart. If you cannot clear the error indication, take the vehicle to an Authorized Mazda Dealer .
Black plate (270,1) Audio Control Switch Operation í When the audio unit is turned on, operation of the audio unit from the steering wheel is possible. NOTE Because the audio unit will be turned off under the following conditions, the switches will be inoperable.
Black plate (271,1) q Changing the Source Press the mode switch ( ) to change the audio source (FM1 radio → FM2 radio → AM radio → CD player or CD changer → SIRIUS1 → SIRIUS2 → SIRIUS3 → AUX → cyclical). * With the SIRIUS digital satellite radio, the mode which was selected last is displayed.
Black plate (272,1) q Mute Switch í Press the mute switch ( ) once to mute audio, press it again to resume audio output. NOTE If the ignition is switched off with the audio muted, the mute will be canceled. Ther efor e, when the engine is restarted, the audio is not muted.
Black plate (273,1) WARNING Do not adjust the por table audio unit or a similar product while driving the vehicle: Adjusting the portable audio unit or a similar product whi le driving the vehicle is dangerou s as it could distract your attention from the vehicle operation which could lead to a serious accident .
Black plate (274,1) 4. Press the AUX button ( ) of the audio unit or the mode switch ( ) of the audio control switches on the steering wheel to change to the AUX mode.
Black plate (275,1) Safety Certification This CD player is made and tested to meet exacting safety standards. It meets FCC requirements and complies with safety performance standards of the U.S. Department of Health and Human Services. CAUTION Ø This CD player should not be adjusted or repaired by anyo ne except qualified ser vice personnel.
Black plate (276,1) Bluetooth® Hands-Free í q What is Bluetooth® Hands-Free? Bluetooth ® Hands-Free Outline By connecting a Bluetooth ® equipped mobile telephone to the hands-free unit equipped o.
Black plate (277,1) NOTE l The Bluetooth ® Hands-Free system is operable several seconds after the ignition is switched to ACC or ON (r equires less than 15 seconds). l If the ignition is switched off during a hands-fr ee call, the line is transferred to the mobile telephone automatically .
Black plate (278,1) Audio unit The audio unit is used for adjustin g the volume. q V oice T o prevent the deteriorat ion in voice recognition rate and voice quali ty , the following points must be observed: l It is not necessary to face the microphone or approach it.
Black plate (279,1) Bluetooth ® Hands-Free Activation Method 1. Program the mobi le telephone (Pairing) Refer to Bluetooth® Hand s-Free Preparation on pag e 6-65. 2. Press the voice recogni tion/hands-free switch with a short press. The hands-free system is activated.
Black plate (280,1) NOTE Other language settings can also be made while in the curr ent setting by saying the name of the language in the native pr onunciation. 7. Prompt: “ French (Desired langua ge) selected. Is this correct ? ” 8. Say: [Beep] “ Ye s ” 9.
Black plate (281,1) 9. Say: [Beep] “ XXXX ” (Speak an arbitrary 4-digit pairing code. This can be any combination of 4 numbers.) NOTE l Some devices accept only a particular pairing code (Usually , “ 0000 ” or “ 1234 ” ).
Black plate (282,1) NOTE Depending on the device, the r egistration status may be lost after a certain period of time. If this occurs, r epeat the entire pr ocess fr om Step 1. q Making a call using a telephone number NOTE Practice this while parked until you ar e confident you can do it while driving in a non- taxing road situation.
Black plate (283,1) q V olume adjustment The power/volume dial of the audio unit is used to adjust the volume. T urn the dial to the right to increase volume, to the left to decrease it. NOTE l The volume can also be adjusted using the volume button on the steering wheel.
Black plate (284,1) 13. Prompt: “ Number, please. ” 14. Say: [Beep] “ XXXXXXXXXXX (Ex. “ 555-1234 ” ) ” (Say the phone number to be registered.) 15. Prompt: “ XXXXXXXXXXX (Ex. “ 555-1234 ” ) (Phone number registration). Is this correct ? ” 16.
Black plate (285,1) q Mute The microphone can be muted durin g a call. 1. Press the voice recogni tion/hands-free switch with a short press. 2. Say: [Beep] “ Mute ” 3. Prompt: “ Microphone muted ” Canceling mute 1. Press the voice recogni tion/hands-free switch with a short press.
Black plate (286,1) NOTE Do this function only when parked. It is too distracting to attempt while driving and you may make too many errors to be effective. 1. Press the voice recogni tion/hands-free switch with a short press. 2. Say: [Beep] “ Phone book ” 3.
Black plate (287,1) 6. Say: [Beep] “ XXXXX... (Ex. “ John's phone ” ) ” (Say the registered voice tag to be deleted from the phone book.) 7. Prompt: “ Deleting XXXXX... (Ex. “ John's phone ” ) (Registered voice tag) Home (Registered location) .
Black plate (288,1) 6. Prompt: “ End of list, would you like to start from the beginning? ” 7. Say: [Beep] “ No ” 8. Prompt: “ Returning to main menu. ” Hands-Free T elephone Setting q Mobile phone Mobile phone registration For the registration of a Bluetooth ® equipped mobile telephone to Blueto oth ® Hands-Free.
Black plate (289,1) Press the voice recognition/hand s-free switch during the read-out at the desired phone, and then say one of the following voice commands to execute it. l “ Select ” : Programmed the mobile phone when the voice recogni tion/ hands-free switch was pressed.
Black plate (290,1) 8. Say: [Beep] “ 2 ” (Say the order of priority of the mobi le phone to be deleted.) NOTE Say “ All ” to delete all mobile phones. 9. Prompt: “ Removing XXXXX... (Ex. phone B...) (Registered phone tag). Is this correct? ” 10.
Black plate (291,1) 4. Say: [Beep] “ Passcode ” 5. Prompt: “ Passcode is enabled. W ould you like to disable it? ” 6. Say: [Beep] “ Ye s ” 7.
Black plate (292,1) 4. Press the voice recogni tion/hands-free switch with a short press. 5. The voice guidance reads out the voice input command number (refer to the voice input command list for voice recognition learning). (E x. “ Please read phrase 1 ” ) 6.
Black plate (293,1) When Bluetooth® Hands- Free cannot be used Bluetooth ® Hands-Free cannot be used under the following conditions: l The mobile telephone is o utside of the communication area. l The mobile telephone has a malfunction. l The mobile telephone is n ot connected to the hands-free unit equipped on the vehicle.
Black plate (294,1) Mazda Bluetooth® Hands- Free Customer Service l U.S.A. Phone: 800-430-0153 (T oll-free) www.MazdaUSA.com/b luetooth l Canada Phone: 800-430-0153 (T oll-free) www.mazdahandsfree.ca 6-80 Interior Comfort Bluetooth® Hands-Free MX-5_8DG6-EA-13F_Edition1 Page294 Thursday , May 30 2013 10:51 AM Form No.
Black plate (295,1) Sunvisors When you need a sunvisor, lower it for use in front. q V anity Mirrors T o use the vanity mirror, lower the sunvisor . Interior Lights q Overhead Light Switch Position Ov.
Black plate (296,1) Cup Holder WARNING Never use a cup holder to hold hot liquids while the vehicle is moving: Using a cup holder to hold hot liquids while the vehicle is moving is dangerous.
Black plate (297,1) Storage Compartments WARNING Keep storage boxes closed when driving: Driving with the storage boxes open is dangerous. To redu ce the possibility of injury in an accident or a sudden stop, kee p the storage boxes closed when driving.
Black plate (298,1) q Back T rim Storage Box í Small items can be stored in the back trim storage box. T o use the back trim storage box 1. T o use the desired storage box, slide the seat in front of it all the way forward. Refer to Seat Slide on page 2-2.
Black plate (299,1) Accessory Socket Switch the ignitio n to ACC or ON. Only use genuine Mazda accessories or the equivalent requiring no great er than 120 W (DC 12 V , 10 A). CAUTION Ø To prevent accessory socket damage or electrical failure, pay attention to th e following: Ø Do not use accessories that require more than 120 W (DC 12 V, 10 A).
Black plate (300,1) Windblocker This windblocker reduces rear wi nd blast into the cabin when driving with the convertible top down. T o use the windblocker, lift it upright. 6-86 Interior Comfort Interior Equipment MX-5_8DG6-EA-13F_Edition1 Page300 Thursday , May 30 2013 10:51 AM Form No.
Black plate (301,1) 7 In Case of an Emergency Helpful information on what to do in an emergency . Parking in an Emergency .................................... ...................... ... 7-2 Parking in an Emergency ............... .....................
Black plate (302,1) Parking in an Emergency The hazard warning lights shoul d always be used when you stop on or near a roadway in an emergency . The hazard warning lights war n other drivers that your vehicle is a traffic hazard and that they must take extreme caution when near it.
Black plate (303,1) Flat Tir e í Either run-flat tires or conventional tires are equipped on your Mazda depending on the specification, there fore the procedure for repairing a flat tire differs depending on the type of tire. Before driving, make sure which type of tire is equipped on your Mazda.
Black plate (304,1) Maximum vehicle speed with a punctured run-flat tire: 80 km/h (49 mph) Maximum driving distance wi th a punctured run-flat tire: 80 km (49 miles) CAUTION The maximum driving dist ance may be shorter dependin g on the driving conditions.
Black plate (305,1) T ool Storage T ools are stored in the locations illustrated in the diagram. Power retractable hardtop emergenc y tool bag T ool bag Glove bo x Lug wrench Jack Jack lev er Instant Mobility System (IMS) Emergenc y Flat T ire Repair Kit T runk room T iedown e yelet Allen wrench Eyebolt Rope Some models.
Black plate (306,1) q Jack T o remove the jack 1. Turn the knob and remove the cover . 2. Turn the wing bolt and jack screw counterclockwise. W ing bolt Jack screw T o secure the jack 1. Insert the wing bolt into the jack with the jack screw pointing back and turn the wing bolt clockwise to temporarily tighten it.
Black plate (307,1) Instant Mobility System (IMS) Emergency Flat Tir e Repair Kit í The IMS emergency flat tire repair kit included with your Mazda is for a temporary repair of a slightly damag ed flat tire resulting from running over nails or similar sharp object s on the road surface.
Black plate (308,1) NOTE l The tir e sealant cannot be r eused. Pur chase new tir e sealant at an Authorized Mazda Dealer . l The emer gency flat tir e r epair kit cannot be used in the following cases. Consult an Authorized Mazda Dealer . l The period of effective use for the tire sealant has expir ed.
Black plate (309,1) NOTE The tire sealant can be used at outside temperatures down to _ 30°C ( _ 22°F). In extr emely cold temperatur es (0°C (32°F) or below), the tir e sealant har dens easily and injection of the sealant will be difficult. W arm the sealant inside the vehicle befor e doing the injection work.
Black plate (310,1) 10. Hold the bottom of the bottle upright, squeeze the bottle with your hands, and inject the entire amount of tire sealant into the tir e. V alve NOTE The tir e sealant cannot be r eused. Pur chase a new tir e sealant kit at an Authorized Mazda Dealer .
Black plate (311,1) 14. Install the compressor hose to the tire valve. V alve Compressor hose 15. Insert the compressor plug into the interior accessory socket and switch the ignition to ACC (page 6-85).
Black plate (312,1) 18. Install the tire valve cap. 19. Put the emergency flat tire repair kit in the trunk and continue drivi ng. CAUTION Ø Drive carefully to an Authorized Mazda Dealer and keep the vehicle speed below 80 km/h (50 mph). Ø If the vehicle is driven 80 km/h (50 mph) or higher, the vehi cle might begin to vibrate.
Black plate (313,1) NOTE The tire sealant has a period of effective use. Check the period of effective use indicated on the bottle label and do not use it if it has expir ed. Have the tir e sealant replaced at an Authorized Mazda Dealer befor e the period of effective use has expired.
Black plate (314,1) 1. Park on a level surface off the right-of- way and firmly set the parking brake. 2. Put a vehicle with an autom atic transmission in Park (P), a manual transmission in Reverse (R) or 1, and turn off the engine . 3. Turn on the hazard warning flasher .
Black plate (315,1) 4. Place the jack under the jack-up position closest to the tir e being changed with the jack he ad squarely under the jack-up point. Jacking position 5. Continue raising the jack head gradually by rotating the screw with your hand until the jack head is inserted into the jack- up position.
Black plate (316,1) 6. Insert the jack handle into the jack. 7. Turn the jack handle clockwise and raise the vehicle high enough so that the tire can be installed. Before removing the lug nuts, make sure your Mazda is firmly in position and that it cannot slip or move.
Black plate (317,1) q Locking Lug Nuts í If your vehicle has Mazda optional antitheft wheel lug nuts, one on each wheel will lock the tires and you must use a special key to unlock them.
Black plate (318,1) 2. Mount the tire. 3. Install the lug nuts with the beveled edge inward; tighten them by hand. WARNING Do not apply oil or grease to lug nuts and bolts and do not tighten the lug nuts beyond the recom mended tightening torque: Applying oil or grease to lug nuts and bolts is dangerous.
Black plate (319,1) 5. Remove the tire blocks and store the tools, jack, and damaged tire. 6. Check the inflati on pressure. Refer to T ires on page 10-7. 7. Have the flat tire repaired or replaced as soon as possible. WARNING Do not drive with any tires that have incorrect air pressure: Driving on tires with incor rect air pressure is dangerous.
Black plate (320,1) Overheating If the temperature gauge indicates overheating, the vehicle loses power , or you hear a loud knocking or pinging noise, the engine is probably too hot.
Black plate (321,1) If you find a leak or other damage, or if coolant is still leaking: Stop the engine and call an Authorized Mazda Dealer . Cooling system cap Coolant reservoir If you find no problems, the engine is cool, and no leaks are obvious: Carefully add coolant as required (page 8-22).
Black plate (322,1) Starting a Flooded Engine If the engine fails to start, it may be flooded (excessive fuel in the engine). Follow this procedure: 1. If the engine does not start within five seconds on the firs t try , switch the ignition off, wait ten seconds and try again.
Black plate (323,1) Jump-Starting Jump-starting is dangero us if done incorrectly . So follow the procedu re carefully . If you feel unsure about jump-starting, we strongly recommend that you have a competent service technician do the work.
Black plate (324,1) Keep all flames, including cigarettes, and sparks away from open batter y cells: Flames and sparks near open battery cells are danger ous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode.
Black plate (325,1) 1. Remove the rubber hose from the battery cover . 2. Remove the battery cover from its right side. 3. Make sure the booster battery is 12 V and that its negative terminal is grounded. 4. If the booster battery is in another vehicle, don't allow both vehicles to touch.
Black plate (326,1) NOTE l Before installing the battery cover , make sur e both of the cables connecting the negative battery terminal (right side of battery) are connected with the cables r outed toward the right and back of the battery as shown in the figure.
Black plate (327,1) T owing Description W e recom mend that towing be done only by an Authorized Mazda Dealer or a commercial tow-truck service. Proper lifting and towing are necessary to prevent damage to the vehicle. Government and local laws must be followed.
Black plate (328,1) Tiedown Hooks CAUTION Do not use the front and rear tiedown eyelets fo r towing the vehicle. They have been design ed only for securing the vehi cle to a transport vessel during shipping. Using the eyelets for any other purpose could result in the vehicle being damaged.
Black plate (329,1) Rear Lug wrench 4. Hook the tying rope to the tiedown eyelet. Front T iedown e yelet Rear T iedown e yelet CAUTION If the tiedown eyelet is not securely tightened, it may loosen or dise ngage from the bumper when tying down the vehicle.
Black plate (330,1) Recreational T owing An example of “ recreational towing ” is towing your vehicle behind a motorhome. The transmission is not designe d for towing this vehicle on all 4 wheels.
Black plate (331,1) 8 Maintenance and Care How to keep your Mazda in top condition. Introduction .................................................. ................................ 8-2 Introduction ............................................. .......
Black plate (332,1) Introduction Be extremely careful and prevent inju ry to yourself and others or damage to your vehicle when using this manual for inspectio n and maintenance.
Black plate (333,1) Any auto repair shop using parts equivalent to your Mazda' s original equipment may perform maintenan ce. But we recommend that it always be done by an Autho rized Mazda Dealer using genuine Mazda parts. Maintenance and Care Introduction 8-3 MX-5_8DG6-EA-13F_Edition1 Page333 Thursday , May 30 2013 10:52 AM Form No.
Black plate (334,1) Scheduled Maintenance (USA, Canada, and Puerto Rico) Follow Schedule 1 if the vehicle is operat ed mainly where none of the following conditions apply .
Black plate (335,1) q Schedule 1 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.
Black plate (336,1) Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 6 12 18 24 30 36 42 48 ×1000 km 12 24 36 48 60 72 84 96 ×1000 miles 7.
Black plate (337,1) q Schedule 2 Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 9.
Black plate (338,1) Maintenance Interval Number of months or kilometers (miles), whichever comes first Months 4 8 12 16 20 24 28 32 36 40 44 48 ×1000 km 8 16 24 32 40 48 56 64 72 80 88 96 ×1000 mile.
Black plate (339,1) Scheduled Maintenance (Mexico) Follow Schedule 1 if the vehicle is operat ed mainly where none of the following conditions apply . l Repeated short-distance driving l Driving in du.
Black plate (340,1) q Schedule 1 Maintenance Interval Number of months or kilometers, whichever comes first Months 6 12 18 24 30 36 42 48 54 60 66 72 ×1000 km 10 20 30 40 50 60 70 80 90 100 1 10 120 .
Black plate (341,1) Maintenance Interval Number of months or kilometers, whichever comes first Months 6 12 18 24 30 36 42 48 54 60 66 72 ×1000 km 10 20 30 40 50 60 70 80 90 100 1 10 120 CHASSIS and B.
Black plate (342,1) q Schedule 2 Maintenance Interval Number of months or kilometers, whichever comes first Months 3 6 9 12 15 18 21 24 27 30 33 36 ×1000 km 5 10 15 20 25 30 35 40 45 50 55 60 ENGINE .
Black plate (343,1) Maintenance Interval Number of months or kilometers, whichever comes first Months 3 6 9 12 15 18 21 24 27 30 33 36 ×1000 km 5 10 15 20 25 30 35 40 45 50 55 60 CHASSIS and BODY Bra.
Black plate (344,1) (Cont.) Maintenance Interval Number of months or kilometers, whichever comes first Months 39 42 45 48 51 54 57 60 63 66 69 72 ×1000 km 65 70 75 80 85 90 95 100 105 1 10 1 15 120 E.
Black plate (345,1) Maintenance Interval Number of months or kilometers, whichever comes first Months 39 42 45 48 51 54 57 60 63 66 69 72 ×1000 km 65 70 75 80 85 90 95 100 105 1 10 1 15 120 CHASSIS a.
Black plate (346,1) Owner Maintenance Schedule The owner or a qualified service technician shoul d make these vehicle inspections at the indicated intervals to ensure safe and dependab le operation. Bring any problem to the attention of an Authorized Mazda Dealer or qualified service technician as soon as possible.
Black plate (347,1) Owner Maintenance Precautions Improper or incomplete servi ce may result in problems. This section gives instructions only for items that are easy to perform. As explained in the Introduction (page 8-2), several procedures can be done only by a qualified service technician with special tools.
Black plate (348,1) WARNING Do not perform main tenance work if you lack sufficient knowledge and experience or the proper tool s and equipment to do the work. Have maintenance work done by a qualified technician: Perfo rming maintenance work on a vehicle is danger ous if not done properly.
Black plate (349,1) Engine Compartment Overview Engine oil dipstick Engine oil filler cap Brake fluid reserv oir / Clutch fluid reservoir W asher fluid reservoir Cooling system cap Battery Engine cool.
Black plate (350,1) Engine Oil NOTE Changing the engine oil should be performed by an Authorized Mazda Dealer . Refer to Introduction (page 8-2) for owner's r esponsibility in pr otecting your investment. q Recommended Oil U.S.A. and CANADA Use SAE 0W-20 engine oil.
Black plate (351,1) (ILSA C) (Mexico) Use SAE 5W -20 engine oil. If SAE 5W - 20 engine oil is not available, use SAE 5W -30 engine oil. The quality designation SM, or IL SAC must be on the label. 80 60 40 20 0 –40 –20 30 120 100 50 40 20 10 0 –10 –20 –30 –40 q Inspecting Engine Oil Level 1.
Black plate (352,1) Engine Coolant q Inspecting Coolant Level WARNING Do not use a match or live flame in the engine compar tment. DO NOT ADD COOLANT WHEN T HE ENGINE IS HOT: A hot engine is dangerous. If the engine has been running, parts of the engine compartment can become very hot.
Black plate (353,1) CAUTION Ø Radiator coolant will da mage paint. Rinse it off quickly if spilled. Ø Use only soft (demineralized ) water in the coolant mixture. Water that contain s minerals will cut down on the coolant's effectiveness. Ø Do not add only water.
Black plate (354,1) Brake/Clutch Fluid q Inspecting Brake/Clutc h Fluid Level WARNING If the brake/clutch fluid level is low, have the brakes inspected: A low brake/clutch fluid level is dangerous. A low level could indicate brake lining wear or a brake system leak which could cause the brakes to fail and lead to an accide nt.
Black plate (355,1) W asher Fluid q Inspecting W asher Fluid Level WARNING Use only windshield washer fluid or plain water in the reservoir: Using radiator antifreeze as washer fluid is dangerous. If sprayed on the windshield, it will dirty the windshield, affect your visibili ty, and could result in an accide nt.
Black plate (356,1) Body Lubrication All moving points of the body , such as door and hood hinges and locks, should be lubricated each time the engine oil is changed. Use a nonfreezing lubricant on locks during cold weather . Make sure the hood' s secondary latch keeps the hood from opening when the primary latch is relea sed.
Black plate (357,1) 1. Raise the wiper arm and turn the blade assembly to expose the p lastic locking clip. Compress the clip and slide the assembly downward; then lift it off the arm. Plastic locking clip CAUTION To prevent damage to the windshield let the wiper arm down easily, don't let it slap down on the windshield.
Black plate (358,1) 4. Carefully insert the new blade rubber . Then install the blade assembly in the reverse order of removal. NOTE Install the blade so that the tabs ar e toward the bottom of the wiper arm. 8-28 Maintenance and Care Owner Maintenance MX-5_8DG6-EA-13F_Edition1 Page358 Thursday , May 30 2013 10:52 AM Form No.
Black plate (359,1) Battery WARNING Wash hands after handling the batter y and related accessories: Battery posts, terminals and relate d accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproduct ive harm.
Black plate (360,1) Keep all flames, including cigarettes, and sparks away from open batter y cells: Flames and sparks near open battery cells are danger ous. Hydrogen gas, produced during normal battery operation, could ignite and cause the battery to explode.
Black plate (361,1) NOTE l Remove the rubber hose first, and then battery cover befor e performing battery maintenance. Battery cov er Rubber hose l Before installing the battery cover , make sur e bo.
Black plate (362,1) Tire s For reasons of proper performance , safety , and better fuel economy , always maintain recommended tire inflation pressures and stay within the recommended load limits and weight distribution. WARNING Using Different Tire T ypes: Driving your vehicle with differe nt types of tires is dangerous.
Black plate (363,1) The T ire Pressure Monitoring System í does not alleviate the need to check the tire condition every day , incl uding whether the tires all look inflated properly . Inspect all tire press ure monthly when the tires are cold. Maintain recommended pressures for the best ride, handling, and minimum tire wear .
Black plate (364,1) After rotation, inflate all tire pressures to specification (page 10-7) and inspe ct the lug nuts for tightness. CAUTION Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or studs only from front to rear, not from side to side.
Black plate (365,1) NOTE T ires degrade over time, even when they ar e not being used on the road. It is r ecommended that tires generally be r eplaced when they ar e 6 years or older . Heat caused by hot climates or fr equent high loading conditions can accelerate the aging pr ocess.
Black plate (366,1) Proper tire balancing provides the best riding comfort and helps reduce tread wear . Out-of-balance tires can cause vibration and uneven wear, such as cupping and flat spots. 8-36 Maintenance and Care Owner Maintenance MX-5_8DG6-EA-13F_Edition1 Page366 Thursday , May 30 2013 10:52 AM Form No.
Black plate (367,1) MEMO 8-37 MX-5_8DG6-EA-13F_Edition1 Page367 Thursday , May 30 2013 10:52 AM Form No.8DG6-EA-13F.
Black plate (368,1) Light Bulbs High-mount brake light License plate lights Trunk light Reverse lights Rear turn signal lights Brake lights/Taillights Rear side-marker lights Overhead light Headlights.
Black plate (369,1) WARNING Do not replace the xen on fusion bulbs yourself: Replacing the xenon fusio n bulbs yourself is dangerous. Because the xenon fusion bulbs require high voltage, you could receive an elec tric shock if the bulbs are handled incorrectly.
Black plate (370,1) Low-beam bulbs (Xenon fusion bulbs) Y ou cannot replace the low beam bulbs by yourself. The bulbs must be replaced at an Authorized Mazda Dealer . (Halogen bulbs) 1. If you are changing the right bulb, start the engine, turn the steering wheel all the way to the right, and turn off engine.
Black plate (371,1) 7. Remove the adapter . 8. Install the ne w bulb in the reverse order of the removal procedure. Fog light bulbs 1. Make sure the ignition is switched off, and the headlight switch is off. 2. Turn the screws and the center section of the plastic retainers counterclockwise and remove them , then partially peel back the mudguard.
Black plate (372,1) 2. Turn the screws and the center section of the plastic retainers counterclockwise and remove them , then partially peel back the mudguard. Remov al Installation 3. Disconnect the connecto r from the bulb by pressing the tab on the connector with your finger and pulling the connector downward.
Black plate (373,1) 5. Disconnect the bulb from the socket. 6. Install the ne w bulb in the reverse order of the removal procedure. Front turn signal lights/Parking lights 1. If you are changing the right bulb, start the engine, turn the steering wheel all the way to the right, and turn off engine.
Black plate (374,1) 3. Pull the center section of the plastic retainers and remove them, then remove the trunk end trim. Remov al Installation 4. Remove the trunk light connector . 5. Remove the trunk lid release lock-out button connector . 6. Pull the center section of the plastic retainers and remove them, then remove the trunk side trim.
Black plate (375,1) Reverse lights Brake lights/T aillight s 9. Install the ne w bulb in the reverse order of the removal procedure. High-mount brake light Due to the complexit y and difficulty of the procedure, the LED bulbs must be replaced by an Authorized Mazda Dealer .
Black plate (376,1) q Replacing Interior Light Bulbs Overhead light 1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the trim and gently insert it in the overhead ligh t as shown in the figure, and then remove the cover . 2. Disconnect the bulb by pulling it out.
Black plate (377,1) Fuses Y our vehicle's electrical system is protected by fuses. If any lights, accessories, or controls don't work, inspect the appropr iate circuit protector .
Black plate (378,1) 6. Reinstall the cover and make sure that it is securely inst alled. Replacing the fuses under the hood If the headlights or other electrical components do not work and the fuses in the cabin are normal, inspect the fuse block under the hood.
Black plate (379,1) q Fuse Panel Description Fuse block (Engine compartment) DESCRIPTION FUSE RA TING PROTECTED COMPONENT 1 F AN 30 A Cooling fan 2 F AN 7.
Black plate (380,1) DESCRIPTION FUSE RA TING PROTECTED COMPONENT 17 BTN 30 A For protection of various circuits 18 MAIN 120 A For protection of all circuits 19 EGI INJ 10 A Injector 20 EGI COMP1 10 A .
Black plate (381,1) Fuse block (Driver's side) DESCRIPTION FUSE RA TING PROTECTED COMPONENT 1 ACC 7.5 A Audio system, Power control mirror 2 AUX PWR 15 A Accessory Socket 3 METER 15 A Instrument cluster 4 SEA T W ARM 20 A Seat warmer í 5 ILLUMI 7.
Black plate (382,1) How to Minimize Environmental Paint Damage The paintwork on your Mazda repres ents the latest technical developments in composition and methods of applicati on. Environmental hazards, howe ver , can harm the paint's protective proper ties, if proper care is not taken.
Black plate (383,1) q W ater Marks Occurrence Rain, fog, dew , and even tap water can contain harmful minerals such as salt and lime. If moisture containing these minerals settles on the vehicl e and evaporates, the minerals will concentrate and harden to form white rings.
Black plate (384,1) Exterior Care Follow all label and container direc tions when using a chemical cleaner or polish. Read all warnings and cautions. q Maintaining the Finish W ashing CAUTION Do not spray water in the engine compartment. Other wise, it could result in engine-starting problems or damage to electric al parts.
Black plate (385,1) Insects, tar , tree sap, bird droppings, industrial fallout, and similar deposits can damage the finish if not removed immediately . When prompt washing with plain water is ineffective, use a mild soap made for use on vehicles. Thoroughly rins e off all soap with lukewarm or cold water .
Black plate (386,1) q Repairing Damage to the Finish Deep scratches or chips on the finish should be repaired promptly . Exposed metal quickly rusts and can lead to major repairs.
Black plate (387,1) q Aluminum Wheel Maintenance A protective coating is provi ded over the aluminum wheels. Special care is needed to protect this coating. CAUTION Do not use any detergent other than mild detergent. Before using any detergent, verify the ingredients .
Black plate (388,1) CAUTION Ø Automatic and high-pr essure car washes are harmf ul to a convertible top. Avoid th em. Ø Do not spray water directly on the area where the window glass and the convertible top meet . This would probably cause water to enter the cabin.
Black plate (389,1) Thoroughly rinse wi th lukewarm or cold water . Don't allow soap to dry on the finish. W axing W ax the hardt op when water no longer beads on the paint. Always wash and dry it before waxing. CAUTION Ø Wiping off dust or dirt with a dry cloth will scratch the finish.
Black plate (390,1) Interior Care WARNING Do not spray water in the cabin : Splashing water on electrical parts such as the audio unit and swit ches is dangerous as it could cause a malfunction or a fire. q Dashboard Precautions Prevent caustic solutions such as perfume and cosmetic oils from contacting the dashboard.
Black plate (391,1) NOTE l Because genuine leather is a natural material, its surface is not uniform and it may have natural scars, scratches, and wrinkles. l T o maintain the quality for as long as possible, periodical maintenance, about twice a year , is recommended.
Black plate (392,1) WARNING Have an Authorized Mazda Dealer replace damaged seat belts immediately: Using damaged seat belts is dangerous. In a collisi on, damaged belts cannot provide adequate protection. q Cleaning the Window Interiors If the windows become covered with an oily , greasy , or waxy film, clean them with glass cleaner .
Black plate (393,1) 9 Customer Information and Report ing Safety Defects Important consumer information including warranties and add-on equipment. Customer Assistance ............................... 9-2 Customer Assistance (U.S.A.) ............ 9-2 Customer Assistance (Canada) .
Black plate (394,1) Customer Assistance (U.S.A.) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda ve hicle in top condition.
Black plate (395,1) By letter at: Attn: Customer Assistance Mazda North American Operati ons 7755 Irvine Center Dri ve Irvine, CA 92618-2922 P.O. Box 19734 Irvine, CA 92623-9734 In order to serve you efficiently and effectively , please help us by providing the following information: 1.
Black plate (396,1) The whole process normally takes 40 days or less. The arbit ration decision is not binding on you or Mazda unless you accept the decision. For more informat ion about BBB AUTO LINE, including current eligibi lity standards, please call 1-800-955-510 0 or visit the BBB website at www.
Black plate (397,1) 6. Y ou are required to use BBB AUTO LINE before asserting in court any rights or remedies conferred by Calif ornia Civil Code Section 1793.22. Y ou are also requi red to use BBB AUTO LINE before exercising rights or seeking remedies created by Title I of the Magnuson-Moss W arranty Act, 15 U.
Black plate (398,1) 10. Y ou may reject the decision issued by a BBB AUTO LINE arbitrator . If you reject the decision, you will be free to pursue further legal action. The arbitrator's decision and any findings will be admissible in a court ac tion.
Black plate (399,1) Customer Assistance (Canada) q Satisfaction Review Process Y our complete and perm anent satisfaction is of prima ry concern to Mazda. All Authorized Mazda Dealers have both the knowledge and tools to keep your Mazda in top condition.
Black plate (400,1) Please recognize that the resolution of service problems in most cases requires the use of your Mazda dealer's service facilit ies, personnel and equipment. W e urge you to follow the above three steps in sequenc e for most effective results.
Black plate (401,1) CAMV AP is fully implemented in all provinces and territories. Consumers wishing to obtai n further information about the Program should contact the Provincial Administrator at 1 (.
Black plate (402,1) Customer Assistance (Puerto Rico) Y our complete and permanent sati sfaction is our business. That is why all Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda vehicle in top condition.
Black plate (403,1) Customer Assistance (Mexico) Y our complete and permanent satisfaction is our business. W e are here to serve you. All Authorized Mazda Dealers have the knowledge and the tools to keep your Mazda ve hicle in top condition.
Black plate (404,1) 2. Y ear and model of vehicl e 3. V ehicle Identification Number (17 digits, noted on your registration or title or located on the upper driver's side corner of the dash) 4. Purchas e date and current mileage 5. Y our dealer 's name and location 6.
Black plate (405,1) Importer/Distributor q U.S.A. Mazda North American Operat ions 7755 Irvine Center Dri ve Irvine, CA 92618-2922 U.S.A. P.O. Box 19734 Irvine, CA 92623-9734 U.S.A. TEL: 1 (800) 222-5500 (in U.S.A.) (949) 727-1990 (outside U.S.A.) q CANADA Mazda Canada Inc.
Black plate (406,1) W arranties for Y our Mazda l New V ehicl e Limited W arrant y l Powertrain Limited W arranty l Safety Restraint System Limi ted W arranty l Anti-perforation Limited W arrant y l F.
Black plate (407,1) Outside the United States and Canada Government regulations in the United State s and Canada require that automobiles meet specific emission regulations and safety standards. Therefore, vehicles built for use in the United States, its territories , and Canada may differ from those sold in other countries.
Black plate (408,1) Outside the United States Government regulations in the United States require that automobiles meet specific emission regulations and safety stand ards. Therefore, vehicles built for use in the United States may differ from those sold in other countr ies.
Black plate (409,1) Outside Canada Government regulations in Canada require that automobiles meet specific emi ssion regulations and safety regulations.
Black plate (410,1) Registering Y our V ehicle in A Foreign Country (Except United States and Canada) Registering your vehicle in a forei gn country may be problematic dependi ng on whether it meets the specific emission and safety stand ards of the country in which the vehicle will be driven.
Black plate (411,1) Add-On Non-Genuine Parts and Accessories Non-genuine parts and access ories for Mazda vehicles can be found in stores. These may fit your vehicle, but they are not approved by Mazda for use with Mazda vehicles.
Black plate (412,1) Cell Phones W arning WARNING Please comply with the legal regulations concernin g the use of communication equipment in vehicles in your State or Provinc e: Use of any electrical devices such as cell phones , computers, portable radios, vehicle navigation or other devices by th e driver while the vehicle is moving is dangerous.
Black plate (413,1) Uniform Tire Quality Grading System (UTQGS) This information relat es to the tire grading system developed by the U.S. Nationa l Highway Traff ic Safety Administration for grading tires by tread wear , traction, and temperature performance.
Black plate (414,1) WARNING Keep your vehicle's tires properly inflated and not overloaded: Driving with improperly inflated or overloaded tires is dangerou s. Excessive speed, underinflation, or exces sive loading, either sep arately or in combination, can cause heat buildup and possible tire failure.
Black plate (415,1) Tir e Labeling Federal law requires tir e manufacturers to place stand ardized information on the sidew all of all tires. This infor mation identifies and descri bes the fundamental characteristics of the tir e and also provides a tire identification numbe r for safety standard certification and in case of a recall.
Black plate (416,1) 1 1. Max. load rating 12. T read wear, traction and temperature grades 13. Max. permissible inflation press ure 14. SAFETY W ARNING P215/65R15 95H is an example of a tire size an d load index rating. Here is an explanation of the various components of that tire size and load index rating.
Black plate (417,1) H “ H ” is the speed rating. The speed rating denotes the maximum speed for which the use of the tire is rated. Letter Rating Speed Rating Q 99 mph R 106 mph S 112 mph T 1 18 m.
Black plate (418,1) T read W ear , T raction and T emperature Grades T read wear : The tread wear grade is a comparative rati ng based on the wear rate of the tire when tested under controlled condition s on a specified government test course.
Black plate (419,1) q Information on T emporary Tires Please refer to the sample below . 1. T emporary tires 2. Nominal width of tire in millimeters 3. Ratio of height to width (aspect ratio) 4. Diagonal 5. Rim diameter code 6. Load index & speed symbol T1 15/70D 16 90M is an example of a tire size and load index rating.
Black plate (420,1) 70 “ 70 ” is the aspect ratio. This two-digit numbe r indicates the tire's ratio of height to width. D “ D ” is the tire construction symbol. D indicates “ diagonal ply constructi on ” . 16 “ 16 ” is the wheel rim diameter in inches.
Black plate (421,1) Location of the Tire Label (Placard) Y ou will find the tire label containing tire inflation pressure by tire size and other imp ortant information on the driver's side B- pillar or on the edge of the driver's door frame.
Black plate (422,1) WARNING Always check the tire inflation press ures on a regular basis according to the recommended tire inflation pressure on the tire label and in conjunction with the information in this owner's manual: Driving your vehicle with under-inflated tire s is dangerous.
Black plate (423,1) q Glossary of T erms Tire Placard: A label indicating the OE tire sizes, recommended inflation pressure, and the maximum weight the vehicl e can carry . Tire Identification Number (TIN): A number on the sidewall of each tire provi ding information about the tire brand and manufacturing plant , tire size, and date of manufacture.
Black plate (424,1) Tir e Maintenance Improper or inadequate vehicle maintenanc e can cause tires to wear abnormally . Here are some important mai ntenance points: q Tir e Inflation Pressure Inspect all tire press ure monthly (including the spare) when the tires are cold.
Black plate (425,1) CAUTION Rotate unidirectional tires and radial tires that have an asymmetrical tread pattern or studs only from front to rear, not from side to side .
Black plate (426,1) q Safety Practices The way you drive has a great deal to do with your tire mileage and safet y . So cultivate good driving habits for your own benefit.
Black plate (427,1) V ehicle Loading WARNING Do not tow a traile r with this vehicle: Towing a trailer with this vehicle is dangerous because it has not been designed to tow a trailer and doing so will affect the drive system which could res ult in vehicle damage.
Black plate (428,1) Base Curb W eight is the weight of the veh icle including a full tank of fuel and all standard equipment . It does not include pa ssengers, cargo, or optional eq uipment. V ehicle Curb W eight is the weight of your new vehicl e when you picked it up from your dealer plus any aftermarket equipment.
Black plate (429,1) SAMPLE CARGO Cargo W eight includes all weight added to the Base Curb W eight, incl uding cargo and optional equipment. The cargo weight limit decreases depending on the number of vehicle occupants.
Black plate (430,1) Examples: Based on a single occupant weight of 68 kg (150 lbs), and a value of 385 kg (849 lbs) for the “ combination weight of occupants and cargo should never exceed ” : The .
Black plate (431,1) SAMPLE WARNING Exceeding Axle Weight Rating Limits: Exceeding the Safety Certification Label axle weight rating limits is dangerous and could result in death or serious injur y as .
Black plate (432,1) GCW GCW (Gross Combination W eight) is the weight of the loaded vehicle (GVW). GCWR (Gross Combination W e ight Rating) is the maximum allowable weight of the vehicle - including all cargo and passengers - that the vehicle can handle without risking damage.
Black plate (433,1) Steps for Determining the Correct Load Limit Steps for Determining Correct Load Limit- (1) Locate the statement “ The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs. ” on your vehicle 's placard.
Black plate (434,1) Reporting Safety Defects (U.S.A.) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Admi nistration (NHTSA) in addition to notifying Mazda Motor Corporation (Y our Mazda Importer/Distribut or).
Black plate (435,1) Reporting Safety Defects (Canada) Canadian customers who wish to report a safety-rel ated defect to T ransport Canada, Defect Investigations and Recalls, may telephone the toll fre.
Black plate (436,1) Service Publications Factory-authorized Mazda servi ce publications are available for owners who wish to do some of their own maintenance an d repair . When requesting any of our publications through an Authorized Mazda Dealer, refer to the chart below .
Black plate (437,1) 10 Specifications T echnical information about your Mazda. Identification Numbers ............... ................................................ 10-2 V ehicle Information Labels ...................................................
Black plate (438,1) V ehicle Information Labels q V ehicle Identification Number The vehicle identification number legally identifies your vehicle. The number is on a plate attached to the cowl panel located on the left corner of the dashboard. This plate can easily be seen through the windshield.
Black plate (439,1) q Engine Number Forward Identification Numbers 10-3 MX-5_8DG6-EA-13F_Edition1 Page439 Thursday , May 30 2013 10:52 AM Form No.8DG6-EA-13F.
Black plate (440,1) Specifications q Engine Item Specification T ype DOHC-16V in-line, 4-cylinder Bore×Stroke 87.5 × 83.1 mm (3.44 × 3.27 in) Displacement 1,999 ml (1,999 cc) Compression ratio 10.
Black plate (441,1) q Capacities (Approximate Quantities) Item Capacity Engine oil W ith oil filter replacement U.S.A. and Canada 6-speed manual transmission 4.55 L (4.81 US qt, 4.00 Imp qt) Except 6-speed manual transmission 4.45 L (4.70 US qt, 3.92 Imp qt) Except U.
Black plate (442,1) (Automatic transmission) Item W eight Without power retractable hardtop With power retractable hardtop GVWR (Gross V ehicle W eight Rating) 1,396 kg (3,078 lbs) 1,416 kg (3,122 lbs.
Black plate (443,1) q Tir es NOTE The tires have been optimally matched with the chassis of your vehicle. When r eplacing tir es, Mazda r ecommends that you r eplace tires of the same type originally fitted to your vehicle. For details, contact an Authorized Mazda Dealer .
Black plate (444,1) Personalization Features The following “ Personalization Features ” are available. These settings can only be changed by an Authorized Mazda Dealer .
Black plate (445,1) 11 Index 1 1-1 MX-5_8DG6-EA-13F_Edition1 Page445 Thursday , May 30 2013 10:52 AM Form No.8DG6-EA-13F.
Black plate (446,1) A Accessory Socket .................. ............ 6-85 Add-On Non-Genuine Parts and Accessories ....................................... 9-19 Advanced Key ....................... ........... ... 3-2 Advanced key maintenance .......
Black plate (447,1) C Capacities .............................. ............ 10-5 Carbon Monoxide ... ............................ 4-4 Catalytic Converter ............................. 4-3 Cell Phones ........................... ............ 9-20 Child Restraint Child restraint precautions .
Black plate (448,1) F Flat T ire ............................................... 7-3 Changing .................................... 7-13 Instant Mobility System (IMS) Emergency Flat Tire Repair Kit ................................................ 7-7 T ool storage .
Black plate (449,1) L Lubricant Quality ........................... ... 10-4 M Maintenance Introduction .................................. 8-2 Owner maintenance precautions ................................. 8-17 Owner maintenance schedul e ..... 8-16 Scheduled .
Black plate (450,1) S Starting the Engine ................. ............. 5-4 Steering Wheel ...................... ............ 3-73 Horn ............................... ............ 5-61 Storage Compartments ...................... 6-83 Back trim storage box .
Black plate (451,1) W W arrant y ......................................... ... 9-14 W asher Fluid .......... ........................... 8-25 W eight s .................. ........................... 10-5 Wheel Replacement .......................... 8-35 W indblocker .
Black plate (452,1) 1 1-8 MX-5_8DG6-EA-13F_Edition1 Page452 Thursday , May 30 2013 10:53 AM Form No.8DG6-EA-13F.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Mazda Not a Manual è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Mazda Not a Manual - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Mazda Not a Manual imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Mazda Not a Manual ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Mazda Not a Manual, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Mazda Not a Manual.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Mazda Not a Manual. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Mazda Not a Manual insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
