Manuale d’uso / di manutenzione del prodotto LWX-1 del fabbricante Lowrance electronic
Vai alla pagina of 16
L WX-1 Satellite W eather Radio Module Installation Instructions WEA THER WEA THER 988-0158-13A.
Copyright © 2009 Navico All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Lowrance® is a registered trademark of Navico.
1 This document covers the installation and status/diagnostic indicators available for the Lowrance L WX-1. It also details how to activate a SIRIUS subscription. L WX-1 package include: Main Components: Antenna Receiver (AR) pre-congured for a mast mount 1.
2 L WX-1 Installation Options The L WX-1 can be mounted in three basic congurations: AR Mast Mount (factory-installed option) 1. AR Flush Mount with cable routed through the mounting surface 2. (e.g. deck) AR Flush Mount with cable routed on top of the mounting surface 3.
3 1. AR Mast Mount Installation The L WX-1 AR is shipped in the retail box factory-congured for a mast mount. T o use AR Mast Mount Installation: Loosen the four AR Bolts & Nuts (a couple of counter-clockwise 1. turns on each). The AR Mast Boot will loosen, allowing the AR Mast Mount to turn.
4 2. AR Flush Mount Installation (through deck) AR Flush Mount with cable routed through the deck. T o use AR Flush Mount through-deck installation: Remove the four AR Bolts & Nuts (the AR Cover and AR Base are 1. factory tted – DO NOT A TTEMPT T O SEP ARA TE THEM) Use the AR Gasket as a template to mark where the AR Mounting 2.
5 3. AR Flush Mount Installation (above deck) In this AR Flush Mount installation, the cable is routed out the back of the L WX-1. This installation is the same as AR Flush Mount through-deck Installation, except the AR Interconnect Cable is routed under the L WX-1 and out the back above the deck instead of through the deck.
6 IM Installation W ith all of the AR installation options, it is recommended that the IM is mounted/ installed below deck. T o install the IM: Open the IM enclosure by unscrewing the two IM Enclosure Screws 1. on the front panel Insert the male RJ45 2.
7 L WX-1 Status Indicators The L WX-1 status indicators are the two LEDs on the Interface Module. The IM in- dicators are to be used to obtain connectivity with the end-user device, where more detailed problem diagnosis is available. Power LED indicates L WX-1 Power: LED OFF 1.
8 If LED blinks ON/OFF three times during the power-up cycle and then turns OFF , an Ethernet loop back connector should be connected to the IM Network Cable and the L WX-1 should be power cycled. If the blinking during power-up does not recur , then the IM Network Cable is good, and the end-user device should be checked.
9 T o activate a SIRIUS subscription: After the L WX-1 module is installed, locate the label on the front ap 1. of the L WX-1 carton Record your ESN number (SIRIUS ID) and contact SIRIUS at 1-800- 2. 869-5480. SIRIUS Marine W eather service can only be activated by phone.
10 L WX-1 Diagnostic Report The following information is shown in the Diagnostic Report retrievable by the Chartplotter . T o view the Diagnostic report, access the SIRIUS Status screen and press MENU .
11 SIRIUS Module Information Name Description Example Radio Activation Status - Data Indicates the activation status of the SIRIUS Radio Module. The rst value indicating an active subscription. Parameter 1 — indicates is set to ‘1’ when there are subscribed channels.
12 Radio Signal Strength Indicates the signal strength received by the SIRIUS Radio Module. The value is in the range of 0-3 with 3 being maximum. V alues are dened as follows: 0 = no signal 1 = we.
13 NA VICO LIMITED TWO-YEAR LOWRANCE W ARRANTY “W e,” “our ,” or “us” refers to NA VICO, the manufacturer of this Lowrance product. “Y ou” or “your” refers to the rst person who purchases this product as a consumer item for personal, family or household use.
www .lowrance.com 988-0158-13A Pub. 012809 © Copyright 2009 All Rights Reserved Navico.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lowrance electronic LWX-1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lowrance electronic LWX-1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lowrance electronic LWX-1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lowrance electronic LWX-1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lowrance electronic LWX-1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lowrance electronic LWX-1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lowrance electronic LWX-1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lowrance electronic LWX-1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
