Manuale d’uso / di manutenzione del prodotto AE-100 del fabbricante Linear
Vai alla pagina of 24
(760) 438-7000 USA & Canada (800) 421-1587 & (800) 392-0123 Toll Free FAX (800) 468-1340 www.linearcorp.com AE-100 Commercial T elephone Entr y System PRINTER’S INSTRUCTIONS: INSTR,AE-100,F ACILITY MANA GER - LINEAR P/N: 227354 B - INK: BLACK - MA TERIAL: 20 LB .
2 Contents Introduction The Model AE-100 Commercial T elephone Entry System is designed for use as an access control de vice for small apar tments or gated communities with up to 125 residents. The system can be used in a lobby or outside . Surf ace, recessed, and pedestal mounting options are suppor ted.
3 Sys tem F eatur es DI S PLAY CABINET LOCK OPTIONAL PO S TAL LOCK S PEAKER KEYPAD LIGHTING KEYPAD MICROPHONE OPTIONAL CCTV CAMERA TTY JACK Your access control installation company has set this Master Password for this installation: ____ ____ ____ ____ ____ ____ Use this password to enter programming mode.
4 Access to P r ogramming T o make it easy f or installers familiar with Linear’ s and other manufacturer’ s access control systems, two methods of prog ramming are av ailable.
5 P r ogramming Over the T elephone Most system commands can be programmed using a T ouchT one™ telephone. The telephone’ s keypad will act similar to the AE-100’ s keypad. Both programming methods can be used o ver the telephone. Connecting with a T elephone 1.
6 P r ogramming Refer ence & F actor y Defaults ST AND ARD PROGRAMMING POSITION NUMBER AL TERNA TE FUNCTION CODE NUMBER FUNCTION OF PROGRAMMING STEP F A CTOR Y DEF A UL T VA L U E 99 91 EXIT PROGR.
7 Resident Data P r ogramming Up to 125 resident Names and T elephone Numbers can be set. Each resident entry is assigned a Director y Code . The Director y Code is the number visitors enter to hav e the system call the resident. Visitors can also contact a resident display ed by pressing the key .
8 Stand-alone Entr y Code Pr ogramming A Stand-alone Entry Code is a number entered at the AE-100 ke ypad to request access. Up to 125 4-digit Stand-alone Entr y Codes can be set. ✦ NO TE: Each Stand-alone Entr y Code programmed reduces the possible n umber of Director y Entries by one.
9 Sys tem Options For most installations the f actor y settings for the system will be appropriate. T o customize the system, enter programming mode via telephone or ke ypad. Use the programming w orksheet supplied to log any system option changes prior to entering it into the system.
10 Sys tem Options (Continued) W elcome Display T ext The AE-100 display will sho w a visitor a welcome message alternating with instructions on how to fi nd and call a resident. The welcome message can be customized to suit the installation. ✦ NO TE: This step cannot be perf or med remotely through the telephone.
11 Sys tem Options (Continued) Maximum Visitor T alk Time Visitors will conv erse with residents ov er the telephone until the resident grants or denies access . If the resident responds to the visitor’ s request by pressing their telephone k ey , the system will hang up and release the telephone line.
12 Sys tem Utilit y Commands Sev eral utility commands are a vailable f or the system. Utility commands can be used to copy data to other units in a multi-unit installation , clear memory , and control the relays. For each of the f ollowing steps, enter the Master P assword and enter Programming Mode (if the unit is not already in that mode).
13 Sys tem Utilit y Commands (Continued) Timed Access Relay Latch For servicing or testing, while in Programming Mode, the access rela y can be latched manually from the ke ypad for a period of hours. 1. Press 2. Enter the amount of time in hours (01-98) for the access rela y to latch.
14 Alternate P r ogramming Section T o make it easy f or installers familiar with Linear’ s and other manufacturer’ s access control systems, two methods of prog ramming are av ailable. Function Codes that match other equipment help the installer to make quick progr amming changes with keystrok es they ha ve used bef ore.
15 Alternate P r ogramming Refer ence Refer to the follo wing pages when programming using the Alternate Programming method. For each of the f ollowing steps, enter the Master P assword and enter Programming Mode (if the unit is not already in that mode).
16 FUNCTION CODE LOCAL PROGRAMMING TELEPHONE PROGRAMMING 02 MODIFY AN EXISTING TENANT DIRECT OR Y ENTR Y Choose a tenant’ s Director y Code to modify (you must kno w the tenant’ s Director y Code to modify). Step 1 Enter Function Code 02, then press #.
17 FUNCTION CODE LOCAL PROGRAMMING TELEPHONE PROGRAMMING 05 MANU AL ACCESS RELA Y CONTROL This command can be used to latch the access relay indefi nitely or for a period of time, and to unlatch the access relay . Step 1 Enter Function Code 05, then press #.
18 FUNCTION CODE LOCAL PROGRAMMING TELEPHONE PROGRAMMING 31 ADD A ST AND-ALONE A CCESS CODE A Stand-alone Access Code is a number entered at the AE-100 keypad to request access . Up to 125 4-digit Stand-alone Access Codes can be set. NO TE: Each Stand-alone Access Code programmed reduces the possible number of Directory Entries by one.
19 FUNCTION CODE LOCAL PROGRAMMING TELEPHONE PROGRAMMING 70 MAXIMUM VISIT OR T ALK TIME If for some reason the resident does not press the telephone keys to g rant or deny access or does not hang up, the system will automatically disconnect the visitor after 60 seconds.
20 FUNCTION CODE LOCAL PROGRAMMING TELEPHONE PROGRAMMING 74 A UTOMA TIC TELEPHONE ANSWER The factory setting will allow the system to detect a ring signal on the telephone line and answer the call.
21 FUNCTION CODE LOCAL PROGRAMMING TELEPHONE PROGRAMMING 91 EXIT PROGRAMMING MODE Entering this command number will cause the unit to exit programming mode and return to normal operation. Step 1 T o exit prog ramming mode, enter Function Code 91, then press #.
22 AE-1 00 Operation Requesting Access with a Visitor Call If the visitor already knows the resident’ s Director y Code number , they can press fi rst, then enter the Director y Code number to call the resident.
23 T r oubleshooting System will not answer an incoming call 1. Automatic telephone ans wer disabled. 2. AE-100 telephone line trouble . Keypad will not activate a relay 1. Entr y code is not assigned. 2. K eypad ma y be in lockout from too man y incorrect attempts.
Copyright © 2007 Linear LLC 227354 B.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Linear AE-100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Linear AE-100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Linear AE-100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Linear AE-100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Linear AE-100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Linear AE-100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Linear AE-100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Linear AE-100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
