Manuale d’uso / di manutenzione del prodotto CBNPes 3956-20 Premium del fabbricante Liebherr
Vai alla pagina of 16
Operating and installation instructions Combined fridge-freezer with BioFresh compartment 151110 7084408 - 03 CBNPes/CBN/CBNes ... 6.
Contents 1 Appliance at a glance ............................................ 2 1.1 Description of appliance and equipment .................. 2 1.2 Range of appliance use ............................................ 2 1.3 Conformity ..................
ance is not suitable for storing and cooling medicines, blood plasma, laboratory preparations or similar substances and products covered by the 2007/47/EC Medical Devices Direc- tive. Misuse of the appliance can result in the stored products suffering harm or perishing.
Gases possibly escaping may ignite due to electrical components. - Do not place any burning candles, lamps or other items with naked flames on or in the appliance. - Only store high-percentage alcohol in tightly sealed, upright containers. Alcohol possibly escaping may ignite due to electrical components.
- F0 to F9 - The power failure symbol shines. 4 Putting into operation 4.1 Changing over the door hinges You can change over the door hinges if necessary. Ensure that the following tools are to hand: q Torx 25 q Torx 15 q Screwdriver q Cordless screwdriver, if necessary q Second person for fitting work, if needed 4.
4.1.5 Transferring the lower bearing elements Fig. 7 u Draw the safety lock Fig. 7 (31) forwards for removal. u Remove the cover Fig. 7 (37) .* u Fully retract the adjustable-height foot Fig. 7 (32) . u If necessary, tip the appliance back a little with the assis- tance of a second person for removal of the bearing pin.
Fig. 11 NOTICE Cables may be twisted and damaged as a result! u Use the template. u Detach the supplied template Fig. 11 (52) from the turn hinge and use it to prevent the turn hinge Fig. 11 (12) and bush from turning. u Using a screwdriver, push out the turn hinge Fig.
4.4 Installing the appliance In the event that the appliance is damaged, contact the supplier immediately before connecting to the mains. The floor at the site must be flat and level. Do not install the appliance in a location where it is exposed to direct radiation of the sun, next to a cooker, heater and similar.
4.7 Switching on the appliance Note u To switch on the entire appliance it is necessary only to switch on the freezer compartment. Put the appliance into operation about 2 hours before first loading food to be frozen. Do not load food to be frozen before the temperature display reads -18 °C.
above the plate separating off the BioFresh zone and at the rear wall. It is warmest at the top front of the compartment and in the door. 5.5.1 Food refrigeration Note The energy consumption increases and the cooling perform- ance decreases if the ventilation is inadequate.
The boxes can be removed and placed on the table as a single unit. Only one box or both boxes can be used. If particularly tall bottles are to be stored, attach only the wide box above the bottle rack. Three small boxes are available through the customer service as optional equipment instead of one wide and one small box.
Standard values for storage time at high humidity Cranberries up to 60 days Rhubarb up to 13 days Gooseberries up to 13 days Grapes up to 29 days 5.6.4 Adjusting the temperature in the BioFresh compartment The temperature is automatically regulated to between 0 °C and 3 °C .
w When the button is pressed the first time, the previous value is indicated in the temperature display of the freezer compartment. u To change the temperature in 1 °C steps: briefly press the button. -or- u To change the temperature continuously: hold down the button.
The moisture condenses on the evaporator, is periodically defrosted and evaporates. u The appliance does not have to be manually defrosted. 6.2 Cleaning the appliance Before cleaning: CAUTION Risk of injury and damage as a result of hot steam! Hot steam may damage the surfaces and cause burns.
u Read the appliance designation Fig. 19 (1) , service No. Fig. 19 (2) and serial No. Fig. 19 (3) off the type plate located inside the appliance on the left- hand side. Fig. 19 u Notify the customer service, specifying the fault, appliance designation Fig.
8 Decommissioning 8.1 Switching off the appliance Note u To switch off the entire appliance it is necessary only to switch off the freezer compartment. 8.1.1 Switching off the freezer compartment u Press On/Off button, freezer compartment Fig. 3 (6) for about 2 s.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Liebherr CBNPes 3956-20 Premium è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Liebherr CBNPes 3956-20 Premium - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Liebherr CBNPes 3956-20 Premium imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Liebherr CBNPes 3956-20 Premium ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Liebherr CBNPes 3956-20 Premium, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Liebherr CBNPes 3956-20 Premium.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Liebherr CBNPes 3956-20 Premium. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Liebherr CBNPes 3956-20 Premium insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
