Manuale d’uso / di manutenzione del prodotto BP-103 del fabbricante Lenoxx Electronics
Vai alla pagina of 20
® COMP ACT DISC PLA YER PLA YS MUSIC COMP ACT DISCS FULL Y PROGRAMMABLE CD PLA YER WITH REPEA T RECEIVES TV BAND AND WEA THER BAND RECEIVES AM/FM BROADCASTS RECORDS FROM CD, RADIO, OR BUIL T -IN MICR.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
2 ADDITIONAL SAFETY INSTRUCTIONS 1 . Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2 . Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
1 . Use only the type and size of batteries mentioned in the operating instructions manual (batteries are not included with this set, please buy the proper batteries). 2 . Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES Y ou can use the AC power or batteries as a power source. 4 T o a wall outlet NOTE: One blade of plug and outlet is wider . AC SOCKET Battery compartment IB-CD103(SY)-WM-E-090402 1 .
1 Slide the FUNCTION switch to CD position (power on), the POWER lamp will be on. And the display will show 2 dashes flashing , then . 3 Close the CD DOOR by pushing it down. The display will show the total tracks on that CD. 4 1 2 & 3 Lift the right corner of the CD DOOR to open it and place the CD in the CD compartment.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback The PLA Y lamp will flash during pause.
LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (see page 4). Slide the FUNCTION switch to RADIO position, the POWER lamp will be on. 1 2 3 1 2 3 Slide the BAND switch to the proper band position (AM, FM, or TV1, TV2 (WEA THER BAND)) that you want.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Slide or Adjust Adjust the volume VOLUME control TIP • Next time you want to listen to the radio, just slide the FUNCTION switch to RADIO.The player automatically starts playing the pre- viously tuned station.
PLA YING A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the tape compartment and insert a recorded tape. Close the door . 3 2 2 3 Press the PLA Y button. The player turns on and starts playing.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Stop playback Eject the cassette Press or Adjust Adjust the volume VOLUME control Fast forward or rewind the tape F AST FOR WARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause.
RECORDING ON A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM, TV1, TV2, CD, or , built-in microphone) you want to record.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the power Press the STOP/EJECT button and slide the FUNCTION switch to T APE position. TIP Press or Adjust Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording.
PLA YING CD TRACKS REPEA TEDL Y (REPEA T PLA Y) 1. Slide the FUNCTION switch to CD position. 2. Select the track by pressing or , and then press . 3. Press the CD REPEA T button. T o repeat Press a single track (song) Press the REPEA T button once, the REPEA T lamp will flash.
Programmed Play PROGRAM 14 PLA YING CD TRACKS IN PROGRAMMED ORDER T o change the current program Just create a new program following the Programming procedure. Y ou can make a program of up to 16 tracks in the order you want them to be played. PROGRAM REPEA T IB-CD103(SY)-WM-E-053002 1 .
PRECAUTIONS On Safety As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only . Should any solid object or liquid fall into the player , unplug the player, and have it checked by qualified personnel before operating it any further .
PRECAUTIONS (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens becomes dirty , it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower .
TROUBLE SHOOTING Problem Remedy The power is not on. Connect the AC power cord to a wall outlet securely . Make sure the batteries are inserted correctly and they are fresh. There is no sound. Make sure the FUNCTION switch is in the correct position.
SPECIFICA TION General Description Power source: AC 120V , 60Hz 12 W atts DC 9V (6 size C batteries) (Alkaline batteries are recommended) Speakers: 2 - 3 1 / 2 8 ohm Output power: 1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lenoxx Electronics BP-103 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lenoxx Electronics BP-103 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lenoxx Electronics BP-103 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lenoxx Electronics BP-103 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lenoxx Electronics BP-103, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lenoxx Electronics BP-103.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lenoxx Electronics BP-103. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lenoxx Electronics BP-103 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
