Manuale d’uso / di manutenzione del prodotto X200S del fabbricante Lenovo
Vai alla pagina of 208
T hinkP a d ® X2 00 an d X2 00s Hard w ar e M a in t e n a n c e Ma nu a l.
.
T hinkP a d ® X2 00 an d X2 00s Hard w ar e M ain t e n an c e Ma nu a l.
Note Before using this information and the pr oduct it supports, be sure to read the general information under “Notices” on page 197. Fourth Edition (December 2008) © Copyright Lenovo 2008.
Contents About this manual . . . . . . . . . .v Safety information . . . . . . . . . .1 General safety . . . . . . . . . . . . . .2 Electrical safety . . . . . . . . . . . . .3 Safety inspection guide . . . . . . . . . . .5 Handling devices that are sensitive to electr ostatic discharge .
Power cords . . . . . . . . . . . . . 186 Recovery discs . . . . . . . . . . . . 187 Common service tools . . . . . . . . . 195 Notices . . . . . . . .
About this manual This manual contains service and refer ence information for the following ThinkPad ® products. ThinkPad X200 MT 7454, 7455, 7457, 7458, 7459, 2023, and 2024 ThinkPad X200s MT 7462, 7465, 7466, 7469, 7470, 2046, and 2047 Use this manual along with the advanced diagnostic tests to troubleshoot problems.
vi ThinkPad X200 and X200s Hardwar e Maintenance Manual.
Safety information This chapter presents following safety information that you need to be familiar with before you service a ThinkPad computer . v “General safety” on page 2 v “Electrical safety.
General safety Follow these rules to ensur e general safety: v Observe good housekeeping in the area of the machines during and after maintenance. v When lifting any heavy object: 1. Make sure that you can stand safely without slipping. 2. Distribute the weight of the object equally between your feet.
Electrical safety Observe the following rules when working on electrical equipment. v Find the room emer gency power-of f (EPO) switch, disconnecting switch, or electrical outlet. If an electrical accident occurs, you can then operate the switch or unplug the power cord quickly .
v Do not touch live electrical circuits with the r eflective surface of a plastic dental mirror . The surface is conductive; such touching can cause personal injury and machine damage.
Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially unsafe conditions. As each machine was designed and built, requir ed safety items were installed to pr otect users and service personnel from injury .
Handling devices that are sensitive to electrostatic discharge Any computer part containing transistors or integrated circuits (ICs) should be considered sensitive to electr ostatic discharge (ESD.) ESD damage can occur when there is a dif ference in charge between objects.
Safety notices: multilingual translations The safety notices in this section are pr ovided in English, French, German, Hebrew , Italian, Japanese, and Spanish. Safety notice 1 Before the computer is power ed on after FRU replacement, make sure all scr ews, springs, and other small parts are in place and ar e not left loose inside the computer .
Safety notice 2 D ANGER Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble a standby battery , recharge it, throw it into fire or water , or short-circuit it. Dispose of the battery as required by local ordinances or regulations.
Safety notice 3 D ANGER The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water , or short-circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
Safety notice 4 D ANGER The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge it, remove its polarized connector , disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water . Dispose of the battery as required by local ordinances or regulations.
Safety notice 5 If the LCD breaks and the fluid fr om inside the LCD gets into your eyes or on your hands, immediately wash the affected ar eas with water for at least 15 minutes. Seek medical care if any symptoms fr om the fluid are present after washing.
Safety notice 6 D ANGER To avoid shock, do not remove the plastic cover that protects the lower part of the inverter card. Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d’alimentation.
Safety notice 8 D ANGER Before removing any FRU, power off the computer , unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables.
Laser compliance statement Some models of ThinkPad computer are equipped fr om the factory with an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such devices are also sold separately as options. If one of these drives is installed, it is certified in the U.
A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may contain an embedded Class 3A or Class 3B laser diode. Note the following: D ANGER Emits visible and invisible laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
16 ThinkPad X200 and X200s Hardwar e Maintenance Manual.
Important service information This chapter presents following important service information: v “Strategy for replacing FRUs” – “Strategy for replacing a har d disk drive” on page 18 – “I.
v If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the original FRU before you continue . v Some computers have both a processor boar d and a system board.
Strategy for replacing FRUs for CTO, CMV , and GA V Product definition Dynamic Configure To Order (CTO) This provides the ability for a customer to configur e an IBM ® or a Lenovo solution from an eSite, and have this configuration sent to fulfillment, wher e it is built and shipped directly to the customer .
warranty.vm&sitestyle=lenovo Select W arranty lookup. Input the MT and the Serial number and the list of key commodities will be returned in the PEW r ecord under COMPONENT INFORMA TION. v Business Partners using Eclaim will access PEW when performing Entitlement Lookup.
Important information about replacing RoHS compliant FRUs RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry . RoHS requirements must be implemented on Lenovo products placed on the market after June 2006.
22 ThinkPad X200 and X200s Hardwar e Maintenance Manual.
General checkout This chapter presents following information: v “What to do first” on page 24 v “Checkout guide” on page 25 – “Diagnostics using PC-Doctor for DOS” on page 26 – “PC-D.
What to do first When you do return a FRU, you must include the following information in the parts exchange form or parts return form that you attach to it: __ 1. Name and phone number of servicer __ 2. Date of service __ 3. Date on which the machine failed __ 4.
Checkout guide Use the following procedur es as a guide in identifying and correcting problems with the ThinkPad computer . Note: The diagnostic tests are intended to test only ThinkPad pr oducts. The use of non-ThinkPad products, pr ototype cards, or modified options can lead to false indications of errors and invalid system r esponses.
Diagnostics using PC-Doctor for DOS The ThinkPad computer has a test program called PC-Doctor for DOS (her eafter called PC-Doctor .) Yo u can detect errors by running the diagnostics test included in PC-Doctor . This section is an overview of the procedure.
Note: PC-Doctor menu does not mean the formal support device list. Some unsupported device names may appear in the PC-Doctor menu. The options on the test menu are as follows: Diagnostics Interactive .
Detecting system information with PC-Doctor PC-Doctor can detect the following system information: Hardware Info v System Configuration v Memory Contents v Physical Disk Drives v Logical Disk Drives v.
Power system checkout To verify a symptom, do the following: 1. T urn off the computer . 2. Remove the battery pack. 3. Connect the ac adapter . 4. Check that power is supplied when you turn on the computer . 5. T urn off the computer . 6. Disconnect the ac adapter and install the charged battery pack.
Checking operational charging To check whether the battery charges properly during operation, use a dischar ged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer . Perform operational charging.
Checking the backup battery Do the following: 1. Power off the computer , and unplug the ac adapter fr om it. 2. T urn the computer upside down. 3. Remove the battery pack (see “1010 Battery pack” on page 64). 4. Remove the backup battery (see “1060 Backup battery” on page 77).
32 ThinkPad X200 and X200s Hardwar e Maintenance Manual.
Related service information This chapter presents following information: v “Restoring the factory contents by using Product Recovery discs” v “Passwords” on page 34 v “Power management” on.
8. When the recovery pr ocess is complete, the W elcome to Microsoft W indows screen is displayed. Follow the instr uctions on the screen to complete the W indows setup. Passwords As many as three passwor ds may be needed for any ThinkPad computer: the power-on passwor d (POP), the hard-disk password (HDP), and the supervisor password (SVP).
How to remove the power-on password To remove a POP that you have forgotten, do the following: (A) If no SVP has been set: 1. T urn off the computer . 2. Remove the battery pack. For how to remove the battery pack, see “1010 Battery pack” on page 64.
Note: To check whether the ThinkPad computer supports the Passphrase function, enter the BIOS Setup Utility and go to Security --> Password . If Using Passphrase item is displayed in the menu, this function is available on the ThinkPad computer . 3.
Power management To reduce power consumption, the computer has three power management modes: screen blank, standby , and hibernation. Screen blank mode If the time set on the “T urn off monitor” timer in the operating system expir es, the LCD backlight turns off.
v The ring indicator (RI) is signaled by a serial device or a PC Card device. v The time set on the resume timer elapses. Note: The computer does not accept any input immediately after it enters standby mode. W ait a few seconds before taking any action to r eenter operation mode.
Symptom-to-FRU index This section contains following information: v “Numeric error codes” v “Error messages” on page 43 v “Beep symptoms” on page 44 v “No-beep symptoms” on page 44 v .
T able 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0187 EAIA data access error—The access to EEPROM is failed. System board. 0188 Invalid RFID Serialization Information Area. System board. 0189 Invalid RFID configuration information area—The EEPROM checksum is not corr ect.
T able 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 0250 System battery error—System battery is dead. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter . 2. Replace the backup battery and ru n BIOS Setup Utility to reset the time and date.
T able 1. Numeric error codes (continued) Symptom or error FRU or action, in sequence 1804 Unauthorized WA N card is plugged in—Power off and r emove the WA N card. 1. Remove the WA N card that you installed. 2. System board. 1805 Unauthorized W ireless USB car d is plugged in—Power off and r emove the W ireless USB card.
Error messages T able 2. Error messages Symptom or error FRU or action, in sequence Device address conflict. 1. Load “Setup Defaults” in the BIOS Setup Utility . 2. Backup battery . 3. System board. Allocation error for device. 1. Load “Setup Defaults” in the BIOS Setup Utility .
Beep symptoms T able 3. Beep symptoms Symptom or error FRU or action, in sequence One beep and a blank, unreadable, or flashing LCD. 1. Reseat the LCD connector . 2. LCD assembly . 3. External CRT . 4. System board. One long and two short beeps, and a blank or unreadable LCD.
LCD-related symptoms T able 5. Minimum quantity of defective pixels required for LCD replacement on June 2006 or later manufactured ThinkPad LCD resolution Bright dots Dark dots Bright and dark dots X.
Intermittent problems Intermittent system hang problems can be due to a variety of causes that have nothing to do with a hardwar e defect, such as cosmic radiation, electrostatic discharge, or softwar e errors. FRU replacement should be consider ed only when a problem r ecurs.
ThinkPad X200 and X200s This chapter presents following pr oduct-specific service references and product-specific parts information. v “Specifications” on page 48 v “Status indicators” on page.
Specifications The following table lists the specifications of the ThinkPad X200 and X200s : T able 7. Specifications Feature Description Processor v Intel ® Core ™ 2 Duo pr ocessor P8400 (2.26 GHz), 1066-MHz FSB, 3-MB L2 cache v Intel Core 2 Duo processor P8600 (2.
T able 7. Specifications (continued) Feature Description Hard disk drive v 80 GB, 5400 rpm, 9.5 mm high, S ATA interface v 160 GB, 5400 rpm, 9.5 mm high, S ATA interface v 250 GB, 5400 rpm, 9.5 mm high, S ATA interface v 320 GB, 5400 rpm, 9.5 mm high, S ATA interface v 100 GB, 7200 rpm, 9.
T able 7. Specifications (continued) Feature Description PCI Express Mini Car d v ThinkPad 1 1b/g W ireless LAN Mini PCI Express Adapter III v Intel W iFi Link 5100 v Intel W iFi Link 5300 v Intel W i.
Status indicators The system status indicators show the status of the computer , as follows: 1 2 3 4 5 6 7 8 9 10 1 2 3 T able 8. Status indicators Indicator Meaning 1 Standby status Green: The computer is in standby mode. Blinking green: The computer is entering standby mode or hibernation mode, or is resuming normal operation.
T able 8. Status indicators (continued) Indicator Meaning 3 Battery status Green: The battery is charged between 80% to 100% of the capacity , and being discharged between 0% to 80% of the capacity . Blinking green: The battery is charged between 20% to 80% of the capacity , and being charged.
FRU tests The following table shows the test for each FRU. T able 9. FRU tests FRU Applicable test System board 1. Diagnostics --> CPU/Coprocessor 2. Diagnostics --> Systemboard 3. If the ThinkPad X200 UltraBase is attached to the ThinkPad computer , detach it.
T able 9. FRU tests (continued) FRU Applicable test Optical drive 1. Diagnostics --> Other Devices --> Optical Drive 2. Interactive T ests --> Optical Drive T est Memory 1. If two DIMMs are installed, remove one of them and run Diagnostics --> PM Memory .
Fn key combinations The following table shows the function of each combination of Fn with a function key . T able 10. Fn key combinations Key combination Description Fn+F1 Reserved. Fn+F2 Lock the computer . Fn+F3 Select a power scheme that has been created by Power Manager .
T able 10. Fn key combinations (continued) Key combination Description Fn+F7 Apply a presentation scheme dir ectly , with no need to start Presentation Dir ector . To disable this function and use the Fn+F7 key combination for switching a display output location, start Presentation Dir ector , and change the settings.
T able 10. Fn key combinations (continued) Key combination Description Fn+cursor keys These key combinations work with W indows Media Player . Fn+down arrow key works for the Play or Pause button, Fn+up arr ow key for the Stop button, Fn+right arrow key for the Next T rack button, and Fn+left arrow key for the Pr evious T rack button.
FRU replacement notices This section contains notices related to r emoving and replacing parts. Read this section carefully befor e replacing any FRU. Screw notices Loose screws can cause a r eliability problem.
Retaining serial numbers This section includes the following descriptions: v “Restoring the serial number of the system unit” v “Retaining the UUID” v “Reading or writing the ECA information.
When you replace the system boar d, you must set the UUID on the new system board as follows: 1. Install the ThinkPad Hardwar e Maintenance Diskette V ersion 1.73 or later , and restart the computer . 2. From the main menu, select 4. Assign UUID . A new UUID is created and written.
Reading or writing the ECA information Information on Engineering Change Announcements (ECA) are stor ed in the EEPROM of the system board. The electr onic storage of this information simplifies the procedur e to check if the ECA has been previously applied to a machine.
Removing and replacing a FRU This section presents dir ections and drawings for use in removing and replacing a FRU. Be sure to observe the following general r ules: 1. Do not try to service any computer unless you have been trained and certified. An untrained person runs the risk of damaging parts.
Before servicing ThinkPad X200 and X200s Removing the SIM card: Some models of the ThinkPad X200 and X200s you are servicing might have the SIM card that the customer has been installed. If the computer you are servicing has the SIM car d, remove it before you start the servicing.
1010 Battery pack D ANGER T able 11 . Removal steps of battery pack Unlock the battery release lever 1 . Holding the battery r elease lever in the unlocked position 2 , remove the battery pack in the dir ection shown by arrow 3 . 1 2 3 When installing: Install the battery pack along the slide rails of the slot.
1020 Hard disk drive (HDD) cover , HDD, and HDD rubber rails or solid state drive (SSD) and storage converter For access, remove this FRU: v “1010 Battery pack” on page 64 T able 12.
T able 12. Removal steps of HDD cover , HDD, and HDD drive rubber rails or SSD and storage converter (continued) 3 4 When installing: Make sure that the HDD connector or SSD connector is attached firmly .
T able 12. Removal steps of HDD cover , HDD, and HDD drive rubber rails or SSD and storage converter (continued) HDD and HDD rubber rails: 5 5 When installing: The rubber rails on the har d disk drive must be attached to the replacement drive. Otherwise the drive cannot be installed pr operly .
T able 12. Removal steps of HDD cover , HDD, and HDD drive rubber rails or SSD and storage converter (continued) When installing: When you install the SSD in the storage converter , do as follows.
1030 DIMM For access, remove this FRU in or der: v “1010 Battery pack” on page 64 T able 13. Removal steps of dimm Remove the DIMM slot cover as shown in this figure.
T able 13. Removal steps of dimm (continued) Note: If only one DIMM is used on the computer you are servicing, the car d must be installed in SLOT -0 ( a ), but not in SLOT -1 ( b ). a b When installing: Insert the notched end of the DIMM into the socket.
1040 Keyboard For access, remove this FRU in or der: v “1010 Battery pack” on page 64 T able 14. Removal steps of keyboard 1 1 1 1 Step Icon Screw (quantity) Color T orque 1 M2 × 5 mm, wafer-head, nylon-coated (4) Black 0.
T able 14. Removal steps of keyboard (continued) Lift the keyboard a little in the dir ection shown by arrow 4 , and then detach the connector 5 .
T able 14. Removal steps of keyboard (continued) When installing: 1. Attach the keyboard connector firmly . 2. Make sure that the keyboar d edges are under the frame as shown in this figure. Then pr ess the keys to latch the keyboard firmly in place. 3.
1050 Palm rest or palm rest with fingerprint reader For access, remove this FRU in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 T able 15. Removal steps of palm rest 1 1 1 1 1 Step Icon Screw (quantity) Color T orque 1 M2 × 5 mm, wafer-head, nylon-coated (5) Black 0.
T able 15. Removal steps of palm rest (continued) Note: Step 2 is only for models with the fingerprint reader . For models without the fingerprint reader , skip step 2 .
T able 15. Removal steps of palm rest (continued) When installing: 1. In models with the fingerprint reader , attach the fingerprint reader connector firmly to the system board. 2. Press the left and right top edges of the palm r est to fit it into place.
1060 Backup battery D ANGER For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with fingerprint reader” on page 74 T able 16. Removal steps of backup battery 1 Use only the battery specified in the parts list for your computer .
T able 16. Removal steps of backup battery (continued) 3 2 When installing: Make sure that the battery connector is attached firmly . 78 ThinkPad X200 and X200s Hardwar e Maintenance Manual.
1070 PCI Express Mini Card for wireless LAN For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with fingerprint reader” on page 74 T able 17.
T able 17. Removal steps of PCI Express Mini Card for wireless LAN (continued) 3 When installing: v In models with wireless LAN car d that has two antenna connectors, plug the gray cable into the jack labeled MAIN on the card, and the black cable into the jack labeled AUX .
T able 17. Removal steps of PCI Express Mini Card for wireless LAN (continued) Harf size PCI Express Mini Card: In step 1 , unplug the jacks by using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in direction of the arr ow .
T able 17. Removal steps of PCI Express Mini Card for wireless LAN (continued) When installing: v Plug the gray cable into the jack labeled MAIN on the card, and the black cable into the jack labeled AUX .
1080 PCI Express Mini Card for wireless WA N For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with fingerprint reader” on page 74 T able 18.
T able 18. Removal steps of PCI Express Mini Card for wireless WAN (continued) 3 When installing: Plug the red cable into the jack labeled MAIN on the card, and the blue cable into the jack labeled AUX .
1090 Intel T urbo Memory Minicard or wireless USB adapter For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with fingerprint reader” on page 74 T able 19.
T able 19. Removal steps of Intel T urbo Memory Minicard or wireless USB adapter (continued) 3 When installing: In models with the wireless USB adapter , plug the yellow cable into the jack on the card.
1 100 Keyboard bezel For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with fingerprint reader” on page 74 T able 20. Removal steps of keyboard bezel 1 Step Screw (quantity) Color T orque 1 M2 × 5 mm, wafer-head, nylon-coated (1) Black 0.
111 0 Speaker assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with fingerprint reader” on page 74 T able 21. Removal steps of speaker assembly 1 2 When installing: Make sure that the speaker connector is attached firmly .
1 120 I/O card assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with fingerprint reader” on page 74 v “ 111 0 Speaker assembly” on page 88 T able 22.
T able 22. Removal steps of I/O card assembly (continued) Note: The cable is secured with a double-faced adhesive tape. 3 4 Step Screw (quantity) Color T orque 2 M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver 0.181 Nm (1.85 kgfcm) T urn the I/O card over , and then disconnect the cable from the flip-lock ZIF connector .
1 130 LCD assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with fingerprint reader” on page 7.
T able 23. Removal steps of LCD assembly (continued) 2 2 Step Screw (quantity) Color T orque 2 M2 × 5 mm, wafer-head, nylon-coated (2) Black 0.181 Nm (1.85 kgfcm) Before step 3 , strip of f the tapes securing the antenna cables, and release the cables from the cable guides of the frame.
T able 23. Removal steps of LCD assembly (continued) 5 5 ThinkPad X200 and X200s 93.
T able 23. Removal steps of LCD assembly (continued) When installing: 1. Route the antenna cables along the cable guides and secure them with the tapes. As you route the cables, make sur e that they are not subjected to any tension. T ension could cause the cables to be damaged by the cable guides, or a wire to be br oken.
1 140 Base cover assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1020 Hard disk drive (HDD) cover , HDD, and HDD rubber rails or solid state drive (SSD) and.
T able 24. Removal steps of base cover assembly for ThinkPad X200 (continued) 3 Step Screw (quantity) Color T orque 3 M2 × 3.5 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) 4 4 4 Step Screw (quantity) Color T orque 4 M2 × 3.
T able 24. Removal steps of base cover assembly for ThinkPad X200 (continued) In step 5 and 6 , remove the system boar d, the DC-in connector , and the fan assembly together from the base cover assembly .
T able 25. Removal steps of base cover assembly for ThinkPad X200s ThinkPad X200s: Remove the top shielding assembly at first. 2 1 Step Screw (quantity) Color T orque 1 M2 × 3 mm, wafer-head, nylon-coated (1) Black 0.181 Nm (1.85 kgfcm) 3 Step Screw (quantity) Color T orque 3 M2 × 3.
T able 25. Removal steps of base cover assembly for ThinkPad X200s (continued) 4 5 4 4 4 Step Screw (quantity) Color T orque 4 M2 × 3.5 mm, wafer-head, nylon-coated (4) Silver 0.181 Nm (1.85 kgfcm) 5 M2 × 3 mm, large-head, nylon-coated (1) Silver 0.
Applying labels to the base cover: The new base cover FRU is shipped with a kit containing labels of several kinds. When you replace the base cover , you need to apply the following labels: 1 Product label 2 Homologation label Following labels need to be peeled off fr om the old base cover , and need to be put on the new base cover .
1 150 Systemboard, DC-in connector , fan, and ExpressCard slot assembly For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1020 Hard disk drive (HDD) cover , HDD, and H.
T able 26. Removal steps of system board, DC-in connector , fan, and ExpressCard slot assembly for ThinkPad X200 ThinkPad X200: Following components soldered on the system boar d are extremely sensitive. When you service the system board, avoid any kind of r ough handling.
T able 26. Removal steps of system board, DC-in connector , fan, and ExpressCard slot assembly for ThinkPad X200 (continued) Note: The DC-in connector and the fan assembly are attached to the underside of the system board. 1 Step Screw (quantity) Color T orque 1 M2 × 3.
T able 26. Removal steps of system board, DC-in connector , fan, and ExpressCard slot assembly for ThinkPad X200 (continued) 5 6 4 4 4 Step Screw (quantity) Color T orque 5 M2 × 3.
T able 26. Removal steps of system board, DC-in connector , fan, and ExpressCard slot assembly for ThinkPad X200 (continued) Note: The ExpressCar d slot assembly is attached to the system board. 1 Step Screw (quantity) Color T orque 1 M2 × 3.5 mm, flat-head, nylon-coated (1) Silver 0.
T able 27. Removal steps of system board, DC-in connector , fan, and ExpressCard slot assembly for ThinkPad X200s ThinkPad X200s: Following components soldered on the system boar d are extremely sensitive. When you service the system board, avoid any kind of r ough handling.
T able 27. Removal steps of system board, DC-in connector , fan, and ExpressCard slot assembly for ThinkPad X200s (continued) Note: The DC-in connector and the fan assembly are attached to the underside of the system board. 8 9 When installing: Make sure that the DC-in connector and the fan connector ar e attached to the system board firmly .
T able 27. Removal steps of system board, DC-in connector , fan, and ExpressCard slot assembly for ThinkPad X200s (continued) When installing: v Before you attach the fan assembly to the computer , apply thermal gr ease, at an amount of 0.2 grams, on the part marked a as in the following figure.
T able 27. Removal steps of system board, DC-in connector , fan, and ExpressCard slot assembly for ThinkPad X200s (continued) T urn the system board over , and then remove the Expr essCard slot assembly from the system boar d.
2010 LCD front bezel For access, remove this FRU: v “1010 Battery pack” on page 64 T able 28. Removal steps of LCD front bezel for 12.1-in. WXGA LCD model 12.1-in. WXGA LCD model: 1 1 1 Step Screw cap Screw (quantity) Color T orque 1 M2.5 × 4 mm, wafer-head, nylon-coated (3) Black 0.
T able 29. Removal steps of LCD front bezel for 12.1-in. WXGA+ LCD model 12.1-in. WXGA+ LCD model: 1 2 2 2 2 2 1 3 3 3 3 Step Screw cap Screw (quantity) Color T orque 1 M2.5 × 4 mm, wafer-head, nylon-coated (2) Black 0.392 Nm (4 kgfcm) 2 M2.
T able 29. Removal steps of LCD front bezel for 12.1-in. WXGA+ LCD model (continued) In step 4 and 5 , detach the claws. Then remove the LCD fr ont bezel. 4 4 6 4 6 4 4 4 5 5 When installing: Make sure that all the claws ar e attached firmly .
2020 Inverter card For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “2010 LCD front bezel” on page 11 0 T able 30. Removal steps of inverter card Note: 12.1-in. WXGA+ LCD models do not have the inverter card. 2 3 4 1 Step Screw (quantity) Color T orque 1 M2 × 3.
2030 Bluetooth daughter card (BDC-2.1) For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “2010 LCD front bezel” on page 11 0 T able 31. Removal steps of Bluetooth daughter card 1 When installing: Make sure that the connector 1 is attached firmly .
2040 Integrated camera For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “2010 LCD front bezel” on page 11 0 T able 32. Removal steps of Integrated camera 3 1 1 2 Step Screw (quantity) Color T orque 1 M2 × 3.5 mm, wafer-head, nylon-coated (2) Silver 0.
2050 LCD panel, LCD brackets, and LCD cable For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with finger.
T able 33. Removal steps of LCD panel, LCD brackets, and LCD cable for 12.1-in. WXGA LCD model (continued) Note: Step 3 is only for models without the integrated camera. For models with the integrated camera, skip step 3 . 3 3 4 Step Screw (quantity) Color T orque 3 M2 × 3.
T able 33. Removal steps of LCD panel, LCD brackets, and LCD cable for 12.1-in. WXGA LCD model (continued) 6 Remove the LCD bracket a . 7 7 8 7 7 8 a a Step Screw (quantity) Color T orque 7 M2 × 2 mm, wafer-head, nylon-coated (4) Black 0.
T able 33. Removal steps of LCD panel, LCD brackets, and LCD cable for 12.1-in. WXGA LCD model (continued) T urn the LCD panel over , and then remove the LCD cable b from the LCD panel. 9 b 10 When installing: Make sure that the LCD cable connector is attached firmly .
T able 34. Removal steps of LCD panel, LCD brackets, and LCD cable for 12.1-in. WXGA+ LCD model 12.1-in. WXGA+ LCD model: 1 3 2 Step Screw (quantity) Color T orque 1 M2 x 2 mm, wafer-head, nylon-coated (1) Silver 0.
T able 34. Removal steps of LCD panel, LCD brackets, and LCD cable for 12.1-in. WXGA+ LCD model (continued) T urn the LCD panel over , and then remove the LCD cable c from the LCD panel. c 7 6 When installing: Make sure that the LCD cable connector is attached firmly .
2060 Hinges and hinge brackets For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “2010 LCD front bezel” on page 11 0 v “2020 Inverter card” on page 11 3 v “2030 Bluetooth daughter card (BDC-2.1)” on page 11 4 v “2040 Integrated camera” on page 11 5 T able 35.
T able 36. Removal steps of hinges and hinge brackets for 12.1-in. WXGA+ LCD model 12.1-in. WXGA+ LCD model: In step 1 , release the antenna cables fr om the cable guides.
T able 36. Removal steps of hinges and hinge brackets for 12.1-in. WXGA+ LCD model (continued) Remove the hinges a and the hinge brackets b . 2 3 2 3 b a b a Step Screw (quantity) Color T orque 2 M2.5 x 4 mm, wafer-head, nylon-coated (2) Black 0.
2070 LCD rear cover and wireless antenna cables For access, remove these FRUs in or der: v “1010 Battery pack” on page 64 v “1040 Keyboard” on page 71 v “1050 Palm rest or palm r est with fi.
T able 37. Removal steps of LCD rear cover and wireless antenna cables for 12.1-in. WXGA LCD model (continued) 2 In step 3 , release the antenna cables fr om the cable guides of the rear cover .
T able 37. Removal steps of LCD rear cover and wireless antenna cables for 12.1-in. WXGA LCD model (continued) 5 5 5 5 5 5 Note: W ireless antennas ar e secured with double-faced adhesive tapes. When installing: When you attache the antenna cables, do as follows.
T able 37. Removal steps of LCD rear cover and wireless antenna cables for 12.1-in. WXGA LCD model (continued) Cable routing: Place the antenna assembly as shown in this figure.
T able 38. Removal steps of LCD rear cover and wireless antenna cables for 12.1-in. WXGA+ LCD model 12.1-in. WXGA+ LCD model: In step 1 , release the antenna cables fr om the cable guides of the rear cover . 1 1 1 1 2 Note: W ireless antennas ar e secured with double-faced adhesive tapes.
T able 38. Removal steps of LCD rear cover and wireless antenna cables for 12.1-in. WXGA+ LCD model (continued) Cable routing: Place the antenna assembly as shown in this figure.
Locations Front view 1 ThinkLight 2 Integrated camera (for some models) 3 Status indicators Note: For the description of each indicator , see “Status indicators” on page 51.
Rear view 1 ExpressCar d slot 2 W ireless radio switch 3 Universal Serial Bus (USB) connector 4 RJ-45 (Ethernet) connector 5 External monitor connector 6 Universal .
Bottom view 1 Battery pack 2 Battery pack latch 3 Docking connector 4 DIMM slots 5 LCD cover latch 6 Built-in speaker 7 5-in-1 Media Card Reader or 3-in-1 Med.
Rear view (ThinkPad X200 UltraBase) 1 AC power connector 2 Universal serial bus (USB) connectors 3 External monitor connector 4 DisplayPort connector 5 Headphone jack .
Bottom view (ThinkPad X200 UltraBase) 1 Battery charger (behind the flip-down door) 2 UltraBase eject request button 3 UltraBase eject lever 4 Power button security latch 5.
Parts list This section contains following lists of the service parts. v “Overall” on page 137 v “LCD FRUs” on page 171 v “Keyboard” on page 184 v “Miscellaneous parts” on page 185 v .
Overall 1 2 5 a 3 4 6 7 8 9 10 11 12 13 14 19 20 22 23 24 25 26 21 18 15 16 17 ThinkPad X200 and X200s 137.
T able 39. Parts list—Overall No. FRU FRU no. RoHS ID CRU ID a See “Miscellaneous parts” on page 185. 1 LCD unit (see “LCD FRUs” on page 171.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 4 W ireless USB adapter v 7454-CTO v 7455-CTO v 7457-CTO v 7458-CTO v 7459-CTO v 2023-CTO v 2024-CTO v 7462-CTO, 44x, 45x, 4C.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 5 System board with Intel Cor e 2 Duo processor P8600 (2.4 GHz), AMT , TPM v 7454-CTO, 22x, 23x, 24x, 25x, 27x, 28x, 2Gx, 2Hx.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 5 System board with Intel Cor e 2 Duo processor P8700 (2.53 GHz), AMT , non-TPM v 7454-CTO v 7455-CTO v 7457-CTO v 7458-CTO, 8Yx v 7459-CTO v 2023-CTO v 2024-CTO 42W8227 R N 5 System board with Intel Cor e 2 Duo processor T9400 (2.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 5 System board with Intel Cor e 2 Duo processor SU9300 (1.2 GHz), AMT , TPM v 7462-CTO, 4Dx, 4Gx v 7465-CTO, 2Ex, 2Hx v 7466-CTO, 38x, 3Bx v 7469-CTO, 58x, 5Bx v 7470-CTO, 68x, 6Bx v 2046-CTO v 2047-CTO 44C9667 R N 5 System board with Intel Cor e 2 Duo processor SU9300 (1.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 5 System board with Intel Cor e 2 Duo processor SL9400 (1.86 GHz), AMT , TPM v 7462-CTO, 47x, 48x, 49x, 4Ax, 4Bx, 4Cx, 4Fx, 4.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 6 512-MB DDR3-1066 SDRAM SO-DIMM (PC3-8500) card v 7454-CTO v 7455-CTO v 7457-CTO, 4Bx, 4Hx v 7458-CTO v 7459-CTO v 2023-CTO .
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 6 2-GB DDR3-1066 SDRAM SO-DIMM (PC3-8500) card v 7454-CTO, 22x, 27x, 2Kx, 2Lx, 2Mx, 2Qx, 2Zx, 95x, 96x, 9Bx, 9Cx, 9Fx, 9Gx v .
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 7 KDDI W ireless WA N Modem Adapter v 7454-CTO v 7455-CTO v 7457-CTO, 49x v 7458-CTO v 7459-CTO v 2023-CTO v 2024-CTO v 7462-.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 8 ThinkPad 1 1b/g W ireless LAN Mini PCI Expr ess Adapter III v 7454-CTO, 2Rx, 92x v 7455-CTO, 3Dx, 3Px v 7457-CTO v 7458-CTO.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 8 Intel W iFi Link 5300 v 7454-CTO, 22x, 23x, 24x, 25x, 27x, 28x, 2Jx, 2Kx, 2Lx, 2Mx, 2Tx, 2Ux, 2Vx, 96x, 9Bx, 9Cx v 7455-CTO.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 9 I/O card assembly with modem connector , with 5-in-1 Media Card Reader slot v 7454-CTO, 22x, 23x, 24x, 25x, 26x, 27x, 28x, .
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 9 I/O card assembly without modem connector , with 3-in-1 Media Card Reader slot v 7454-CTO, 2Rx, 92x v 7455-CTO, 3Dx, 3Px v .
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 11 Battery pack, 6cell v 7454-CTO, 22x, 23x, 24x, 25x, 27x, 28x, 2Hx, 2Jx, 2Kx, 2Lx, 2Mx, 2Px, 2Qx, 2Rx, 2Sx, 2Tx, 2Ux, 2Vx, .
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 11 Battery pack, 6cell v 7454-CTO, 22x, 23x, 24x, 25x, 27x, 28x, 2Hx, 2Jx, 2Kx, 2Lx, 2Mx, 2Px, 2Qx, 2Rx, 2Sx, 2Tx, 2Ux, 2Vx, .
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 11 Battery pack, 9 cell v 7454-CTO v 7455-CTO, 3Ex, 3Qx, D5x v 7457-CTO v 7458-CTO, 59x, 5Hx, 5Jx, 5Qx, 7Bx, 7Cx, 83x, 88x, 8.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 S ATA hard disk drive, 80 GB, 9.5 mm, 5,400 rpm v 7454-CTO, 4Gx v 7455-CTO v 7457-CTO v 7458-CTO v 7459-CTO v 2023-CTO v 2024-CTO v 7462-CTO v 7465-CTO v 7466-CTO v 7469-CTO, E1x v 7470-CTO, 6Gx, E1x v 2046-CTO v 2047-CTO 42T1305 R * 13 S ATA hard disk drive, 80 GB, 9.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 S ATA hard disk drive, 160 GB, 9.5 mm, 5,400 rpm OP v 7454-CTO, 25x, 26x, 29x, 2Gx, 2Hx, 2Nx, 2Rx, 2Ux, 2Vx, 2Xx, 2Y.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 S ATA hard disk drive, 160 GB, 9.5 mm, 5,400 rpm v 7454-CTO, 25x, 26x, 29x, 2Gx, 2Hx, 2Nx, 2Rx, 2Ux, 2Vx, 2Xx, 2Yx, 92x, 9.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 S ATA hard disk drive, 250 GB, 9.5 mm, 5,400 rpm OP v 7454-CTO, 23x, 28x, 2Lx, 2Tx, 2Wx, 9Bx, 9Cx v 7455-CTO, 33x, 3.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 S ATA hard disk drive, 250 GB, 9.5 mm, 5,400 rpm v 7454-CTO, 23x, 28x, 2Lx, 2Tx, 2Wx, 9Bx, 9Cx v 7455-CTO, 33x, 3Cx, 3Lx, .
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 S ATA hard disk drive, 320 GB, 9.5 mm, 5,400 rpm v 7454-CTO v 7455-CTO, 3Hx, 3Nx, 3Vx, 3Xx, 3Yx, D2x, D3x v 7457-CTO v 745.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 S ATA hard disk drive, 160 GB , 9.5 mm, 7,200 rpm OP v 7454-CTO, 2Jx, 2Px, 2Qx, 2Zx, 96x v 7455-CTO, 3Ex, 3Qx v 7457.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 S ATA hard disk drive, 320 GB , 9.5 mm, 7,200 rpm v 7454-CTO v 7455-CTO v 7457-CTO v 7458-CTO v 7459-CTO v 2023-CTO v 2024-CTO v 7462-CTO v 7465-CTO v 7466-CTO v 7469-CTO v 7470-CTO v 2046-CTO v 2047-CTO 42T1571 R * 13 S ATA hard disk drive, 200 GB (FDE), 9.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 13 S ATA hard disk drive, 250 GB (FDE), 9.5 mm, 7,200 rpm v 7454-CTO v 7455-CTO v 7457-CTO v 7458-CTO v 7459-CTO v 2023-CTO v 2024-CTO v 7462-CTO v 7465-CTO v 7466-CTO v 7469-CTO v 7470-CTO v 2046-CTO v 2047-CTO 42T1563 R * 13 S ATA hard disk drive, 250 GB (FDE), 9.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 16 S ATA solid state drive, 64 GB, 8 mm v 7454-CTO, 24x, 2Kx v 7455-CTO, 34x, 38x v 7457-CTO, 4Cx, 4Ex v 7458-CTO, 72x, 74x v.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 17 DVD drive, 9.5 mm v 7454-CTO v 7455-CTO v 7457-CTO v 7458-CTO v 7459-CTO v 2023-CTO v 2024-CTO v 7462-CTO v 7465-CTO v 7466-CTO v 7469-CTO v 7470-CTO v 2046-CTO v 2047-CTO 42T2541 R * 17 DVD drive, 9.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 17 DVD/CD-R W combo drive, 9.5 mm v 7454-CTO v 7455-CTO v 7457-CTO v 7458-CTO, 7Bx v 7459-CTO, M4x v 2023-CTO v 2024-CTO v 7462-CTO v 7465-CTO v 7466-CTO v 7469-CTO, 5Jx, 5Wx, E1x v 7470-CTO, E1x v 2046-CTO v 2047-CTO 42T2513 R * 17 DVD-RAM/R W drive, 9.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 17 DVD-RAM/R W drive, 9.5 mm v 7454-CTO, 2Hx, 2Jx, 2Px, 2Qx, 2Zx, 96x, 98x, 9Gx v 7455-CTO, 3Sx, 3Tx, 3Xx, 3Yx v 7457-CTO v 7.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 20 Base cover assembly for 7459 42X5178 R N 20 Base cover assembly for 2023 42X5180 R N 20 Base cover assembly for 2024 42X51.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 21 Fan assembly , LV for X200s v 7462-CTO, 42x, 43x, 44x, 45x, 46x, 47x, 48x, 49x, 4Ax, 4Bx, 4Cx, 4Ex, 4Fx, 4Hx, 4Jx, 4Kx, 4L.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 24 Palm rest assembly with fingerprint r eader , with Logo plate, 35W for X200 v 7454-CTO, 22x, 23x, 24x, 25x, 26x, 27x, 28x,.
T able 39. Parts list—Overall (continued) No. FRU FRU no. RoHS ID CRU ID 24 Palm rest assembly with fingerprint r eader , 25W for X200s v 7462-CTO, 42x, 43x, 44x, 45x, 46x, 47x, 48x, 49x, 4Ax, 4Bx, .
LCD FRUs In ThinkPad X200 and X200s, there ar e following types of LCDs. v “12.1-in. WXGA TFT” v “12.1-in. WXGA+ TFT” on page 181 12.1-in. WXGA TFT 1 3 4 5 7 6 9 8 2 10 ThinkPad X200 and X200s.
T able 40. Parts list—12.1-in. WXGA TFT No. FRU FRU no. RoHS ID CRU ID 1 LCD bezel assembly v 7454-all v 7455-all v 7457-all v 7458-all v 7459-all v 2023-CTO v 2024-CTO v 7462-CTO, 42x, 43x, 44x, 45.
T able 40. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 3 W ireless LAN antenna kit v 7454-CTO, 26x, 29x, 2Gx, 2Hx, 2Kx, 2Lx, 2Rx, 2Wx, 2Xx, 2Yx, 92x, 95x, 97x, 98x v 7455.
T able 40. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 3 W ireless LAN/W AN/USB antenna kit v 7454-CTO v 7455-CTO v 7457-CTO v 7458-CTO v 7459-CTO v 2023-CTO v 2024-CTO v.
T able 40. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 5 LCD rear cover assembly v 7454-all v 7455-all v 7457-all v 7458-all v 7459-all v 2023-CTO v 2024-CTO v 7462-CTO, .
T able 40. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 7 Integrated camera v 7454-CTO, 23x, 24x, 25x, 28x, 2Jx, 2Mx, 2Qx, 2Sx, 2Tx, 2Ux, 2Vx, 2Zx, 93x, 96x, 9Bx, 9Cx, 9Gx.
T able 40. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 8 Inverter card v 7454-all v 7455-all v 7457-all v 7458-all v 7459-all v 2023-CTO v 2024-CTO v 7462-CTO, 42x, 43x, .
T able 40. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 9 Bluetooth daughter card (BDC-2.1) v 7454-CTO, 22x, 23x, 24x, 25x, 26x, 27x, 28x, 29x, 2Gx, 2Hx, 2Jx, 2Kx, 2Lx, 2M.
T able 40. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 10 LCD panel, 12.1-in. WXGA v 7454-all v 7455-all v 7457-all v 7458-all v 7459-all v 2023-CTO v 2024-CTO v 7462-CTO.
T able 40. Parts list—12.1-in. WXGA TFT (continued) No. FRU FRU no. RoHS ID CRU ID 10 LCD panel, 12.1-in. WXGA v 7454-all v 7455-all v 7457-all v 7458-all v 7459-all v 2023-CTO v 2024-CTO v 7462-CTO.
12.1-in. WXGA+ TFT 1 2 3 5 4 6 7 8 ThinkPad X200 and X200s 181.
T able 41. Parts list—12.1-in. WXGA+ TFT No. FRU FRU no. RoHS ID CRU ID 1 LCD bezel assembly v 7462-CTO, 4Dx, 4Ex, 4Fx, 4Gx, 4Hx, 4Jx v 7465-CTO, 2Ex, 2Fx, 2Hx, 2Jx, 2Kx v 7466-CTO, 38x, 39x, 3Ax, 3.
T able 41. Parts list—12.1-in. WXGA+ TFT (continued) No. FRU FRU no. RoHS ID CRU ID 5 Hinge L/R v 7462-CTO, 4Dx, 4Ex, 4Fx, 4Gx, 4Hx, 4Jx v 7465-CTO, 2Ex, 2Fx, 2Hx, 2Jx, 2Kx v 7469-CTO, 58x, 59x, 5Ax.
Keyboard T able 42. Parts list—Keyboard Language P/N RoHS ID CRU ID Arabic 42T3752 42T3686 R ** Belgian 42T3749 42T3683 Brazilian Portuguese 42T3768 42T3702 Bulgarian 42T4143 42T4139 Canadian French.
Miscellaneous parts T able 43. Parts list—Miscellaneous parts FRU P/N RoHS ID CRU ID Screw kit 44C9558 R N Base cover miscellaneous parts kit: v Dummy cover , RJ-1 1 connector v Knob, W ireless WA N.
Power cords A ThinkPad power cord for a specific country or r egion is usually available only in that country or region: T able 45. Parts list—2-pin power cords Region P/N RoHS ID CRU ID Argentina v models -CTO, xxY 42T5020 42T5105 R * Brazil v models -CTO, xxP 42T5180 42T5183 Canada, U.
Recovery discs Windows XP Professional DVDs W indows XP Professional is pr einstalled as the operating system in the following models: v 7454-CTO, 2Gx, 2Hx, 2Tx, 2Ux, 2Vx, 2Wx, 2Xx, 2Yx, 2Zx, 92x, 93x.
T able 47. Parts list—Windows XP Professional recovery DVDs Language P/N RoHS ID CRU ID Arabic 46V3670 R N Brazilian Portuguese 46V3671 Czech 46V3673 Danish 46V3674 Dutch 46V3685 English 46V3696 Eng.
Windows V ista Home Basic (32 bit) DVDs W indows V ista Home Basic (32 bit) is pr einstalled as the operating system in the following models: v 7454-CTO v 7455-CTO v 7457-CTO, 4Ax, 4Gx, 4Ux, 4Vx v 745.
Windows V ista Home Premium (32 bit) DVDs W indows V ista Home Pr emium (32 bit) is pr einstalled as the operating system in the following models: v 7454-CTO, 29x v 7455-CTO v 7457-CTO, 48x, 4Bx, 4Hx, 4Wx v 7458-CTO v 7459-CTO v 2023-CTO v 2024-CTO v 7462-CTO, v 7465-CTO v 7466-CTO, 3Fx v 7469-CTO v 7470-CTO v 2046-CTO v 2047-CTO T able 49.
Windows V ista Business (32 bit) DVDs W indows V ista Business (32 bit) is pr einstalled as the operating system in the following models: v 7454-CTO, 22x, 23x, 24x, 25x, 26x, 27x, 28x, 2Jx, 2Kx, 2Lx, .
T able 50. Parts list—Windows Vista Business (32 bit) DVDs Language P/N RoHS ID CRU ID Brazilian Portuguese 46V3560 R N Czech 46V3563 Danish 46V3564 English 46V3586 English (modem-disabled) 46V3585 .
Windows V ista Business (64 bit) DVDs W indows V ista Business (64 bit) is pr einstalled as the operating system in the following models: v 7454-CTO v 7455-CTO v 7457-CTO v 7458-CTO v 7459-CTO, 6Tx, 6Ux, 6Vx, 6Xx, 6Wx, 7Px v 2023-CTO v 2024-CTO v 7462-CTO v 7465-CTO v 7466-CTO v 7469-CTO v 7470-CTO v 2046-CTO v 2047-CTO T able 51.
Windows V ista Ultimate (32 bit) DVDs W indows V ista Ultimate (32 bit) is pr einstalled as the operating system in the following models: v 7454-CTO v 7455-CTO v 7457-CTO v 7458-CTO, 5Jx, 5Px, 5Tx, 7Bx, F9x v 7459-CTO, 66x, M4x v 2023-CTO v 2024-CTO v 7462-CTO v 7465-CTO v 7466-CTO v 7469-CTO, 5Wx v 7470-CTO v 2046-CTO v 2047-CTO T able 52.
Common service tools T able 53. Parts list—Common service tools T ool P/N Screwdriver kit 95F3598 1/4 ″ drive spinner handle 1650840 1/4 ″ Sq. to 1/4 ″ hex torx adapter 93F2838 TR7-TR-10 tamper resistant torx bits 00P6967 Removal tool antenna RF connector 08K7159 USB 2.
196 ThinkPad X200 and X200s Hardwar e Maintenance Manual.
Notices Lenovo may not offer the pr oducts, services, or features discussed in this document in all countries. Consult your local Lenovo repr esentative for information on the products and services curr ently available in your area.
vary significantly . Some measurements may have been made on development-level systems and there is no guarantee that these measur ements will be the same on generally available systems. Furthermore, some measur ements may have been estimated through extrapolation.
.
Part Number: 43Y6632_03 (1P) P/N: 43Y6632_03.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lenovo X200S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lenovo X200S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lenovo X200S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lenovo X200S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lenovo X200S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lenovo X200S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lenovo X200S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lenovo X200S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
