Manuale d’uso / di manutenzione del prodotto CS-1004 del fabbricante Lenco Marine
Vai alla pagina of 19
OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Stereo Radio • RDS (Radio Data System) Operation • Digital Compact Disc Player • Automatic Memory Storing • Full Detachable Panel •P .
CONTENTS Installation ...........................................3 T ake out screw befor e installation.........3 DIN Front-Mount (Method A) ................3 Installing the unit .................................3 Removing the unit ...................
INST ALLA TION Notes: • Choose the mounting location where the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
INST ALLA TION 6. Mount the sleeve by inserting the sleeve into the opening of the dashboard and bend open the tabs located around the sleeve with a screwdriver . Not all tabs will be able to make contact, so examine which ones will be most effective.
DIN REAR-MOUNT (Method B) If your vehicle is a Nissan, Toyota, follow these mounting instructions. Use the screw holes marked T (T oyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle.
USING THE DET ACHABLE FRONT P ANEL REMOVING THE FRONT P ANEL 1. Pr ess the release button (REL) on the front panel and pull of f the front panel. 2. Keep fr ont panel into the case. INST ALLING THE FRONT P ANEL To install the front panel, insert the panel into the housing and make sure the panel is properly installed.
WIRING CONNECTION ISO Connection ISO SOCKET PIN OUT Part A Power Connection Part B Speaker Connection 1. Free 1 + 2. Free 2 – 3. Free 3 + 4. Memory (+B permanent) 4 – 5. T rip line for fully automatic antenna 5 + 6. Free 6 – 7. Main power supply (+B ignition) 7 + 8.
OPERA TION LOCA TION OF KEYS 14 4 2 16 17 13 8 9 10 7 11 1 12 3 20 21 6 22 23 19 18 15 5 24 GB-8.
OPERA TION SWITCHING ON/OFF THE UNIT Switch on the unit by pressing any button (except REL button (7) and EJECT button (4)). When system is on, press PWR button (9) to turn off the unit. F ACEPLATE RELEASE Press REL button (7) to detach the removable faceplate.
OPERA TION c) RETUNE L, RETUNE S mode The initial time of automatic T A search or PI sear ch mode is selected. When PI information is not caught for retune time, the radio start to retune to next same PI station.
OPERA TION “NO PTY” -> Each displaying time is several seconds, and come back to 1’st position after several seconds. Notes: - CT = clock time - FREQ. = frequency EQUALIZA TION Press PEQ button (19) to turn on equalization function and to select desired audio mode.
OPERA TION immediately to switch on or off R.D.S. mode. Whenever R.D.S. is switched on, symbol “AF” appears on the display . Program name is displayed on receiving a R.D.S. station. “AF” starts blinking if the broadcasting signal getting worse.
OPERA TION R.D.S. T A information was received from curr ent station and the radio switched to that R.D.S. linked station, but no information could not be received because the R.D.S. linked station is located too far from that area. So the radio is switched back to current station again.
OPERA TION • PLA YING ALL TRACKS IN RANDOM Press SHF button (23) to play all tracks on CD in random order . Press again to cancel the function. • EJECTING A DISC Press EJECT button (4) to stop CD playing and eject the disc from the disc slot (5).
OPERA TION unit searches the track after few seconds, even if the enter button is not pressed. Searching Dir ectory or File Name Press AMS (MP3) button for two times.
OPERA TION KEY Assigned IN Searching mode (T able 1) AUDIO SELECT UP/DOWN & TUNE/SEEK/TRACK UP/DOWN buttons: Searching file and dir ectory during Navigation. MIXED-CD OPERA TION If available, the unit can play the mixed- CD disc (the disc contains both CD audio tracks and MP3 files).
Recordable Rewritable DISC NOTES: A. Notes on discs : 1. Attempting to use nonstandard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use round shape CD discs only for this unit. 2. Do not stick paper or tape etc., onto the label side or the recording side of any discs, as it may cause a malfunction.
GENERAL Po w er Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 160 (D) x 50 (H) Tone Controls - Bass (at 100 Hz) : ± 10 dB - T r eble (at 10 KHz) : ± 10 dB Maximum Output P ow er : 4 x 15 W atts Current Drain : 5 Amper e (max.
TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is pr operly not on.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Lenco Marine CS-1004 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Lenco Marine CS-1004 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Lenco Marine CS-1004 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Lenco Marine CS-1004 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Lenco Marine CS-1004, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Lenco Marine CS-1004.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Lenco Marine CS-1004. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Lenco Marine CS-1004 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
