Manuale d’uso / di manutenzione del prodotto LS8000-3 del fabbricante Laser
Vai alla pagina of 221
LaserSpee d LS8000-3 INSTRUCTI ON HANDBOOK - instal lation, s etup a nd technic al ref erence - (for qualifie d perso nnel o nly) Manual Part Num ber: 93463 • Manual Drawing Number: 0921-01561 • English • Revision A• © Co pyrigh t Sep 2007 www .
LaserSpeed 8 000-3 Instru ction Handb ook Contents Part No. 93463 / Drawing No. 0921-01561 Page 2 of 221 Revision A (Sep 2007) Declaration of Confor mity.
LaserSpeed 8 000-3 Instru ction Handb ook Contents Part No. 93463 / Drawing No. 0921-01561 Page 3 of 221 Revision A (Sep 2007) Contents Con tents .........................................................................................................
LaserSpeed 8 000-3 Instru ction Handbook Contents Part No. 93463 / Drawing No. 0921-01561 Page 4 of 221 Revision A (Sep 2007) Diff erential vs. Single En d ed Puls e Outputs ..............................................................38 Quadratur e Output Phas e Rela tionshi ps .
LaserSpeed 8 000-3 Instru ction Handbook Contents Part No. 93463 / Drawing No. 0921-01561 Page 5 of 221 Revision A (Sep 2007) Newport P6000A ..............................................................................................................
LaserSpeed 8 000-3 Instru ction Handbook Contents Part No. 93463 / Drawing No. 0921-01561 Page 6 of 221 Revision A (Sep 2007) UDP Com mand Ex am ple .....................................................................................................174 UDP Real-T ime Measurem ent Exam ple .
LaserSpeed 8 000-3 Instru ction Handbook Propriet ary Stat ement Part No. 93463 / Drawing No. 0921-01561 Page 7 of 221 Revision A (Sep 2007) Proprietary Statement Manufacturer/Distributor Beta Laser M.
LaserSpeed 8 000-3 Instru ction Handbook European Commission Requirements Part No. 93463 / Drawing No. 0921-01561 Page 8 of 221 Revision A (Sep 2007) European Commission Requir ements This equip m ent is intended for use in a heavy indu strial envir onment.
LaserSpeed 8 000-3 Instru ction Handbook Safety Informa tion Part No. 93463 / Drawing No. 0921-01561 Page 9 of 221 Revision A (Sep 2007) Safety Informat ion • Under NO circumstances should the earth safety connections be broken – internal damage to sensitive electronic componen ts may occur and at worst electroc ution to personnel may result.
LaserSpeed 8 000-3 Instru ction Handbook Safety Informa tion Part No. 93463 / Drawing No. 0921-01561 Page 10 of 221 Revision A (Sep 2007) Laser Classifi cation The Model LS8000-3 Non-contact Length and Speed Gauge (Model LS8000-3) is classi fied as a IIIb laser device.
LaserSpeed 8 000-3 Instru ction Handbook Safety Informa tion Part No. 93463 / Drawing No. 0921-01561 Page 11 of 221 Revision A (Sep 2007) The following system specifications will help establish appropriate safety measures. Maximum L aser Power 0.050 watt Laser Wav elength 0.
LaserSpeed 8 000-3 Instru ction Handbook Safety Informa tion Part No. 93463 / Drawing No. 0921-01561 Page 12 of 221 Revision A (Sep 2007) If your country or state h as no regulat ions governing the sa.
LaserSpeed 8 000-3 Instru ction Handbook Safety Informa tion Part No. 93463 / Drawing No. 0921-01561 Page 13 of 221 Revision A (Sep 2007) LS8000-3E L abels LS8000-3X L abels.
LaserSpeed 8 000-3 Instru ction Handbook Introduction Part No. 93463 / Drawing No. 0921-01561 Page 14 of 221 Revision A (Sep 2007) Introduc tion This manual describes the installation and setup o f the LaserSpeed 8000 gauge. For daily routine usage, see the LaserSpeed 8000 O perator Guide.
LaserSpeed 8 000-3 Instru ction Handbook System O verview Part No. 93463 / Drawing No. 0921-01561 Page 15 of 221 Revision A (Sep 2007) κ M aterial Surface M eas ure ment Region d R e sult in g Elect .
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 16 of 221 Revision A (Sep 2007) Installing the System This section describes mounting, alignment and other installation concerns f or the LS8000-3.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 17 of 221 Revision A (Sep 2007) Mounting Distance W hen the material is within t he depth of f ield, the gauge m akes accurate measurements.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 18 of 221 Revision A (Sep 2007) coolant is blown off in the same direction the material is moving, the air velocity can add or subtract from the ma terial’s velocity; this too may cause erroneous measurements.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 19 of 221 Revision A (Sep 2007) for more details.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 20 of 221 Revision A (Sep 2007) Twinner Lines W hen m ounting the gauge on a tw inner line, the gauge should be positioned far enough from the twinner that the twist is set.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 21 of 221 Revision A (Sep 2007) Aligning t he Gauge Once the gauge is mounted at the proper standoff distance, the critical alignment angles need to be checked.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 22 of 221 Revision A (Sep 2007) Types of Gauge Misalignm ent Measu red Velocity = A ctual Veloci t y x cos(A ) x cos(B) Error Angle (Degrees) 0 0.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 23 of 221 Revision A (Sep 2007) Gauge Orientation The LaserSpeed gauge m ust be mounted such that the material t o be measured moves in a direction parallel to the bottom of the LS8000 -3, as shown below.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 24 of 221 Revision A (Sep 2007) Connecting Power t o the Gauge The gauge requires a 20–2.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 25 of 221 Revision A (Sep 2007) Connecting to Out puts On the LS8000-3 model, the outputs of the gauge are contained on the 9-pin and 25-pin D-sub connectors, and the M 12 D- Coded Ethernet connector.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 26 of 221 Revision A (Sep 2007) LS8000-3 25-Pin Connect or Pinout Pin Description 1 RS-232.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 27 of 221 Revision A (Sep 2007) LS8000-3 9-Pin Connector Pinout Pin Description 1 RS-422 T.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 28 of 221 Revision A (Sep 2007) LS8000-3E/L S8000-3X Connector Pinout The LS8000-3E/LS8000-3X cables have a circular 39-pin military connector on the gauge end and a DB 37 connector on the opposite end.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 29 of 221 Revision A (Sep 2007) LS8000-3 Conne ctor Pin DB37 39-Pin Description 1 1 1 RS23.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 30 of 221 Revision A (Sep 2007) LS8000-3E/L S8000-3X Breakaw ay Cable Pinout LaserSpeed br.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 31 of 221 Revision A (Sep 2007) Maximizing Per fo rmance The system is now at the point where it can be pow ered on and the laser activated so beams are emitt ed from the front of the gauge.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 32 of 221 Revision A (Sep 2007) Alternatively, the analog port can be configured to output QF on a 0–1 V scale. The QF can then be m onitored by connectin g a panel meter to the analog output and displaying the voltage.
LaserSpeed 8 000-3 Instru ction Handbook Installing t he Syste m Part No. 93463 / Drawing No. 0921-01561 Page 33 of 221 Revision A (Sep 2007) Starting/Ending Length Correction The Validation Time Limit feature is used because the M ater ial Present signal tells the gauge that material is indeed moving through the measurement zone.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 34 of 221 Revision A (Sep 2007) Interfacing with the LS8000 -3 The LS8000-3 has a v ariety of outputs that allow length and velocity data to be transmitted to external devices or control algorithms.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 35 of 221 Revision A (Sep 2007) DB25 Connector The 25-pin interface port contains .
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 36 of 221 Revision A (Sep 2007) RS-232 Transmit and Receive (Pins 1-2) The LS8000-3 has an R S- 232 serial port which can be used to receive measurement data, or to configure settings.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 37 of 221 Revision A (Sep 2007) High Speed Pulse Output (Pins 3, 5, 7, 9) This quadrature pulse output is a high-speed RS-422 driv e output with an output rate up to 5MHz.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 38 of 221 Revision A (Sep 2007) User Scal eable Pulse Out put (Pins 15, 4, 6, 8) This pulse output is a user-defined 5-24V voltage output w ith output rates up to 250 kHz.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 39 of 221 Revision A (Sep 2007) Because the opto-isolator in the circuit has a rel.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 40 of 221 Revision A (Sep 2007) Typical Full Quadrature Pulse Train with Negative Velocity Note: If excessive or erratic coun ts are noticed, the main cause is usually improper termination of the pulse signals.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 41 of 221 Revision A (Sep 2007) Quadrature Outputs at Extr emely Low Pulse Frequ e.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 42 of 221 Revision A (Sep 2007) Measurement Units Minimum Pulse O utput Reso lutio.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 43 of 221 Revision A (Sep 2007) Material Present Input (Pi n 10) This is an optically isolated input that can be used to ex t ernally control the Material Present feature of the LS8000-3.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 44 of 221 Revision A (Sep 2007) Material Prese nt Transition Effect Material Prese.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 45 of 221 Revision A (Sep 2007) Example 1: You are using an external ma ke/break optical switch to begin and end the measurement.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 46 of 221 Revision A (Sep 2007) Connecting Material Pres ent Switches This section shows how t o connect a commonly used M at erial Present detector.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 47 of 221 Revision A (Sep 2007) W hen t he product enters the measurement area and triggers the sw it ch, the Material Present signal should activate.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 48 of 221 Revision A (Sep 2007) P art t o be me as ure d Li n e moveme nt Ent r an.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 49 of 221 Revision A (Sep 2007) Signal Grounds (Pins 11, 19, 21) Multiple ground inputs have been supplied for the pulse outputs (Hi gh Speed, User Scaleable, and Index) to provide good references f or cabling.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 50 of 221 Revision A (Sep 2007) Isola tion Not R equired between Power S upp ly an.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 51 of 221 Revision A (Sep 2007) Measurement Directi on Input (Pin 14) This is an optically isolated input that can be used to ex t ernally control the Measurement Direction feature of the LS8000-3.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 52 of 221 Revision A (Sep 2007) Laser Interlock ( Pin 16) The Laser Interlock input wi ll switch off the laser power w hen the connection to ground is broken.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 53 of 221 Revision A (Sep 2007) Shutter Control (Pin 17) All Class 3B laser products are required to hav e a shutter to terminate the laser beams before exiting the product.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 54 of 221 Revision A (Sep 2007) Length Reset Input Circuit The Length Reset Input Action configuration setting affects how this input resets the length.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 55 of 221 Revision A (Sep 2007) Index (Printer) Pulse Output (Pins 22- 23) Also referred to as a Once-Per-Rev (OPR) pulse, this output can be conf igured to output pulses at speci fied lengt h intervals.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 56 of 221 Revision A (Sep 2007) DB9 Connector The 9-pin interface port contains th.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 57 of 221 Revision A (Sep 2007) T ransmit Recei ve Pi n 1 ( T X+) Pi n 2 ( T X-) P.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 58 of 221 Revision A (Sep 2007) Analog speed data can b e obtained in a 0–2 V format.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 59 of 221 Revision A (Sep 2007) 0 2 4 6 8 10 12 14 16 0 0.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 60 of 221 Revision A (Sep 2007) elongation), or by connecting the LS8000-3 gauges together in a daisy-chain configuration (for synchronization only.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 61 of 221 Revision A (Sep 2007) LS8000-3 Interface Cables DB25 Cables These cables connect the LS8000-3 25-Pin conn ector, and are available in lengths from 3 to 50m.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 62 of 221 Revision A (Sep 2007) Heavy Industrial Cable s LaserSpeed heavy industrial cables are designed for use in heav y industr ial environments where high temperatures and heavy coolant spray are encountered.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 63 of 221 Revision A (Sep 2007) Part Number Length Cable Description 85277-10M 10m (32.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 64 of 221 Revision A (Sep 2007) Low Temperature Brea kaway Cable High Temperature .
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 65 of 221 Revision A (Sep 2007) Breakaway Cable Mounting Bracket Beta LaserMike Pa.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 66 of 221 Revision A (Sep 2007) LS8000-3 Breakout Assemblies For easy interfacing, Beta LaserMike off ers several different I/O breako ut kits that connect directly to LaserSpeed cables.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 67 of 221 Revision A (Sep 2007) DB25 Brea kout Assemb lies Mounting Dimensions for: 85328, 85 329 Part Number 85329 is show n in the drawing below.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 68 of 221 Revision A (Sep 2007) DB37 Brea kout Assemb lies Mounting Dimensions for: 85321, 85 322, 85323, 853 24 Part Number 85324 is show n in the drawing below.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 69 of 221 Revision A (Sep 2007) Breakout Assembly Pinou ts The pinouts for the brea kout assembly connectors are listed below .
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 70 of 221 Revision A (Sep 2007) Ethernet Connector This RJ45 connector can be connec ted to any Ethernet hub or sw it ch.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 71 of 221 Revision A (Sep 2007) Application I nterfaces Light Stack Interf ace The.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 72 of 221 Revision A (Sep 2007) The LS8000-3 operates the light stack in the follo.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 73 of 221 Revision A (Sep 2007) Thermostat Interface In order to extend the ambient temperature range o f LaserSpeed gauges, you can provide water or air cooling/heating.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 74 of 221 Revision A (Sep 2007) Index Pulse & Length Thresholds The Index Puls.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 75 of 221 Revision A (Sep 2007) Gauge-Gauge Sy nchronization LaserSpeed LS9000 and LS8000 gauges can be sy nchr onized so that their sampling periods are synchronized, and so they u pdat e their outputs at the same time .
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 76 of 221 Revision A (Sep 2007).
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 77 of 221 Revision A (Sep 2007) Banner D10 Through Beam Swi t ch Single through be.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 78 of 221 Revision A (Sep 2007) Banne r Retroflect ive Switch (P icodo t) Pinout Signal PD45 LaserSpeed Power (+10 v to +3 0v) Brown See below Material Prese nt White 10 Signal Ground Blue 11 Pullup (4.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 79 of 221 Revision A (Sep 2007) DataPro 1000 Quadrature Pinout Signal DP1K LaserSp.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 80 of 221 Revision A (Sep 2007) DataPro 3000 Pinout Signal DP3K DB25 LaserSpeed Si.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 81 of 221 Revision A (Sep 2007) DataPro 5000 BB Quadrature Pinout Signal DP5K Lase.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 82 of 221 Revision A (Sep 2007) DataPro 5000 DN Quadrature Pinout Signal DP5K Lase.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 83 of 221 Revision A (Sep 2007) DataPro 5000 DN – Beckhoff I/O Quadrature Pinout.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 84 of 221 Revision A (Sep 2007) Domino A Series Pinout Signal Domino A200 LaserSpeed Signal A 2 15 Print Go 3 22 Signal Ground 1 11 User Voltage 4 20 Notes: Configure the Lase rSpeed for the appropriate pulse per unit length.
LaserSpeed 8 000-3 Instru ction Handbook Interfacing wit h the LS80 00-3 Part No. 93463 / Drawing No. 0921-01561 Page 85 of 221 Revision A (Sep 2007) Durant Pr esi dent S eries Quadrature Pinout Signa.
LaserSpeed 8 000-3 Instru ction Handbook Part No. 93463 / Drawing No. 0921-01561 Page 86 of 221 Revision A (Sep 2007) Durant Settings Func # Value 5 0.
LaserSpeed 8 000-3 Instru ction Handbook Part No. 93463 / Drawing No. 0921-01561 Page 87 of 221 Revision A (Sep 2007) Hengstler 723.1 Quadrature Pinout Signal Hengstler LaserSpeed Signal A 30 15 Signa.
LaserSpeed 8 000-3 Instru ction Handbook Part No. 93463 / Drawing No. 0921-01561 Page 88 of 221 Revision A (Sep 2007) Imaje S4/ S8 Pinout Signal Imaje S4/S8 LaserSpe ed Signal A T1-8 8 Print Go T1-4 2.
LaserSpeed 8 000-3 Instru ction Handbook Part No. 93463 / Drawing No. 0921-01561 Page 89 of 221 Revision A (Sep 2007) MI800 Quadrature Pinout Signal MI800 LaserSpeed Signal A B 15 Signal B C 6 Signal .
LaserSpeed 8 000-3 Instru ction Handbook Part No. 93463 / Drawing No. 0921-01561 Page 90 of 221 Revision A (Sep 2007) Newport P6000A Pulsed Pinout Signal Newport LaserSpeed Signal A TB2 1 15 Signal Gr.
LaserSpeed 8 000-3 Instru ction Handbook Part No. 93463 / Drawing No. 0921-01561 Page 91 of 221 Revision A (Sep 2007) Red Lion PAXI Quadrature Pinout Signal PAXI LaserSpe ed Signal A 5 15 Signal B 6 6.
LaserSpeed 8 000-3 Instru ction Handbook Part No. 93463 / Drawing No. 0921-01561 Page 92 of 221 Revision A (Sep 2007) Siemens Counter Module 450-1 Quadrature Pinout Signal 450-1 LaserSpeed Signal A 23.
LaserSpeed 8 000-3 Instru ction Handbook Part No. 93463 / Drawing No. 0921-01561 Page 93 of 221 Revision A (Sep 2007) Siemens Counter Module 6ES5 385-8MB11 Quadrature Pinout Signal Siemens LaserSpeed .
LaserSpeed 8 000-3 Instru ction Handbook Part No. 93463 / Drawing No. 0921-01561 Page 94 of 221 Revision A (Sep 2007) TrueMeter Quadrature Pinout Signal TrueMeter LaserSpeed Signal A 3 15 Signal B 2 6.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 95 of 221 Revision A (Sep 2007) LaserTrak Software LaserTrak® is a W indows ® -based software program, which allows y ou to acquire and display the Length, Velocity, Quality Factor, and Gauge Status in real time.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 96 of 221 Revision A (Sep 2007) Software Insta llation Procedure Complete the following steps to install the LaserTrak software: 1) Insert the LaserTrak for Windows Setup CD into your CD-ROM drive.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 97 of 221 Revision A (Sep 2007) Note: Make sure that the LaserSpeed gauge is connected to the computer via RS232, RS422 or Ethernet before starting the Laser Trak software.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 98 of 221 Revision A (Sep 2007) The Communication screen will then be displayed show ing the COM port and BAUD rate and communication parameters it found to com municate with the ga ug e.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 99 of 221 Revision A (Sep 2007) Chart Recorder Screen Gauge Info Length (m) – the length on the LaserSpeed gauge’s length counter. The length is accumu latio n from th e las t time the gauge w as reset.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 100 of 221 Revision A (Sep 2007) reset every time data acquisition is restarted. Note: This is not the average of the QF on t he display. Point Reco rd Numbe r - is the number data points ac q uired since the data acquisition began.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 101 of 221 Revision A (Sep 2007) Velocity is set during gauge Configuration. Set the "Hold Velocity if Above" setting to a large value (like 900,000.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 102 of 221 Revision A (Sep 2007) Data Storage Options— allows data acquired fr om the gauge to be stored in a file to be recalled later back into LaserTrak or imported into an Excel work sheet.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 103 of 221 Revision A (Sep 2007) Enable Vertical Tracking on Start- W hen Checked, autoscaling on the th e vertical axis will automatically be turned on each time the S tart Readings button is pressed.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 104 of 221 Revision A (Sep 2007) Terminal Assist Screen This screen c an be used t o m anuall y send com mands to the gauge.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 105 of 221 Revision A (Sep 2007) Search For LaserSpeed- initiates a search f or the LaserSpeed gauge to establish communication between LaserTrak and the gauge.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 106 of 221 Revision A (Sep 2007) LaserTrak Confi gurati on Screens Gauge Info Tab- Screen displays gauge information. This tab displays general information about the gauge.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 107 of 221 Revision A (Sep 2007) Standard Tab- shows common operatin g parameters for the LaserSpeed gauge. These parameters can b e used to tailor the gauge operation to fit a specific application.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 108 of 221 Revision A (Sep 2007) A dvanced Tab- screen show s advanced operating parameters setting s for the gauge. These are operating parameters that can be use to tailor the gauge to a specific application.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 109 of 221 Revision A (Sep 2007) Standard Operating Para meters Material Present Input Mode Controls how the gauge deter mines Material Pr esent.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 110 of 221 Revision A (Sep 2007) m/min x 1min/60sec x 10,000 pulses/ m = 166,667 1/s ). The range is 0.00 1 to 100,000. Measurement Units Sets the u nits that the length and speed will be measure d in.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 111 of 221 Revision A (Sep 2007) Low Speed Pulse Co nfig The low speed pul se output default s to outputti ng pulse accor ding to the Low Speed Pulse R ate set in the st andard Configura tion Tab.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 112 of 221 Revision A (Sep 2007) Hold Velocity If Above The gauge w ill hold the last v alid velocity reading abov e the value set i n Hold Velocity If Ab ove w hen the gauge stops making val id measu rements.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 113 of 221 Revision A (Sep 2007) COMM LED Control Indicates tra ffic on either RS2 32/RS422 or Ethernet.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 114 of 221 Revision A (Sep 2007) Middle line of Chart Recorder Screen - shows the pro gram control line Window – On ce the Graphing, Monitor and Length window s have been opened, W indow allows switching between each window.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 115 of 221 Revision A (Sep 2007) Displaying Data There are three main ways to display data. They are the Chart Recorder, Length and Speed Monitor and the Len g th Histogram.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 116 of 221 Revision A (Sep 2007) Factor will be displayed graphically and the Length and Status information will be displayed in a table format. Press the Start Readings button to acquire data from the gauge.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 117 of 221 Revision A (Sep 2007) Monitor Display The Monitor Display show s the Speed and Length in a number format and the Quality Factor as a Bar Graph.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 118 of 221 Revision A (Sep 2007) For example, the Quality Factor that indicates the gauge is measuring a poor light scattering surface when the Quality Factor is relatively constant but lower then 15.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 119 of 221 Revision A (Sep 2007) can be accomplished by making the speed go t o zero ther eby freezing the length counter or by using the M at erial present signal to freeze length readings.
LaserSpeed 8 000-3 Instru ction Handbook LaserTrak Soft ware Part No. 93463 / Drawing No. 0921-01561 Page 120 of 221 Revision A (Sep 2007) Lower Tolerance: allows the user t o alarm on m easurements b.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 121 of 221 Revision A (Sep 2007) RS-232/RS-422 Communication The LS8000-3 gauge has a full set of serial commands which y ou can use to configure and read data from the instrument.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 122 of 221 Revision A (Sep 2007) Baud Rate & Fram ing Settings Setting Baud Rate Framing 1 230.4k 7n2 2 115.2k 7n2 3 57.6k 7n2 4 38.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 123 of 221 Revision A (Sep 2007) recommends that the RS-422 port be used f or high speed, lon g distance communications. Note : Hig h-baud rates are only required when acquiring length and speed data over the serial port.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 124 of 221 Revision A (Sep 2007) For example: if the RS-232 port is configured for 38.4kBaud, 7N2, and the RS- 422 baud rate is set to 115.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 125 of 221 Revision A (Sep 2007) Method 2 1) Start HyperTerminal (or any other terminal program) and set to 19200, 7, N, 2 (or the baud rate y ou want to use later).
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 126 of 221 Revision A (Sep 2007) In this section, characters sent to or received fr om the LS8000-3 are indi cat ed with a different font.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 127 of 221 Revision A (Sep 2007) Communication Protocol: Command Descripti ons @ RS-.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 128 of 221 Revision A (Sep 2007) J RS-232 Baud Rate & Framing J<CR> Read Response F orm at: <N> J<N><CR> Set <N> is an int eger fr om 1-7, or 11 to 17 specif ying the RS- 232 baud r ate and f ram ing.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 129 of 221 Revision A (Sep 2007) & Qualit y Factor Warning Threshol d &<C.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 130 of 221 Revision A (Sep 2007) B Hold Velocity If Ab ov e B<CR> Read Respons.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 131 of 221 Revision A (Sep 2007) C Calib ratio n T rim C<CR> Read Response Form at: <N> C<N><CR> Set <N> is a num ber bet ween 5000 and 200 00, corres ponding to 50% to 200%.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 132 of 221 Revision A (Sep 2007) N Analog Zero Scale Velocity N<CR> Read Respo.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 133 of 221 Revision A (Sep 2007) F Material Present Dropout Time F<CR> Read Re.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 134 of 221 Revision A (Sep 2007) TP Velocity at Loss of Material TP<CR> Read Response Form at: <N> TP<N><CR> Set <N> is an int eger eit her 0 or 1 in dicatin g the Veloc it y at Loss of Material setting.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 135 of 221 Revision A (Sep 2007) Response: 3225,4538<CR> Meaning: Internal T emper ature: 32.2 5ºC Maxim um Internal T em perature: 4 5.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 136 of 221 Revision A (Sep 2007) Q Quality Factor C urrent Va lue Q<CR> Read O nl y Command Response Form at: <N> <N> is an int eger fr om 0 to 15 indicati ng the cur rent Q ualit y Factor.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 137 of 221 Revision A (Sep 2007) % Length Reset Input Action %<CR> Read Response Form at: <N> %<N><CR> Set <N> is an int eger sp ecif ying the Len gth Res et Input Action m ode.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 138 of 221 Revision A (Sep 2007) Exam ple: If using t wo extern al Mat erial Present.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 139 of 221 Revision A (Sep 2007) W Walki ng Threshold W<CR> Read Response Form at: <N> W<N><CR> Set <N> is an int eger f rom 0 to 999,999, 999 that is the walk ing velocit y value m ulti plied b y 1000.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 140 of 221 Revision A (Sep 2007) # Index Pulse Output Function #<CR> Read Response For mat: <N> #< N><CR> S et <N> is a n inte ger specif yin g the f unction of the Index Pulse output.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 141 of 221 Revision A (Sep 2007) QF Warning Output This output indic ates when the Q F has decrease d belo w a thresh old.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 142 of 221 Revision A (Sep 2007) Indicates when t he current length has exc eeded th e Length T hresho ld A set point. This output is r eset when the I ndex Pulse res ets.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 143 of 221 Revision A (Sep 2007) $A Length Threshold A $A<CR> Read Response Form at: <N> $A<N><CR> Set <N> is an int eger sp ecif ying the num ber of User Scale able P ulses f or Length T hreshol d A.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 144 of 221 Revision A (Sep 2007) The output will c lear whe n the leng th reac hes 200f t, and the Index Pu lse tr iggers . See the Index Pulse & Length Thre sholds s ection f or tim ing de tails.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 145 of 221 Revision A (Sep 2007) <N> is an int eger fr om 0 to 999,999,999 that is the n um ber of puls es per un it length s caled by 1000.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 146 of 221 Revision A (Sep 2007) Note: Some of the above o utputs wer e previous ly des cr ibed under the Index Pu lse Outp ut Function setting.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 147 of 221 Revision A (Sep 2007) P User Scaleab le Pulse Rate P<CR> Read Respo.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 148 of 221 Revision A (Sep 2007) $C COM LED Function $C<CR> Read Response Form at: <N> $C<N><CR> Set <N> is either 0 or 1.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 149 of 221 Revision A (Sep 2007) *LOCKED Setting Lock *LOCKED?<CR> Read Response Form at: *LOCKED=<N><CR> *LOCKED=<N><CR> Set <N> is either 0 or 1.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 150 of 221 Revision A (Sep 2007) *GINFO Gauge Model and Serial Number *GINFO?<CR&.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 151 of 221 Revision A (Sep 2007) *DHCP DHCP Enable/Di sable *DHCP?<CR> Read Response Form at: *DHCP=<N><CR> *DHCP=<N><CR> Set <N> is an int eger, eit her 0 or 1.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 152 of 221 Revision A (Sep 2007) *NAME Hostname *NAME?<CR> Read Response Form .
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 153 of 221 Revision A (Sep 2007) Response: *IPADDR=192.168.0.213<CR> This setting ca n be dis regarded if the E thernet o ption i s not ins talled.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 154 of 221 Revision A (Sep 2007) *IPNETMSK Netmask *IPNETMSK?<CR> Read Response Form at: *IPNETMSK=<N><CR> S e t *IPNETMSK=<XXX.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 155 of 221 Revision A (Sep 2007) TE Text Output Mode TE<CR> Data Output Comm and Data Form at: <L,V,QF,ST><CR> This comm and places th e LS8000- 3 int o Text O utput Mode .
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 156 of 221 Revision A (Sep 2007) Example TE Data Output: +000006090,+000144950,15,63.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 157 of 221 Revision A (Sep 2007) By te Value 0 FF (hex) 1 FF (hex) 2 FF (hex) 3 FF (.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 158 of 221 Revision A (Sep 2007) TT Configurabl e Text Output Mode TT<CR> Data Output Comm and Response For mat: Variable TT<N><CR> Set <N> specif ies the out put for m at.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 159 of 221 Revision A (Sep 2007) 79,+000000741,000012344,15,63,3125<CR> 79,+000000864,000012342,15,63,3125<CR> Thes e readings indica te th e lengt h increas ing f rom +0 .
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 160 of 221 Revision A (Sep 2007) *AUTO232 RS-232 Po w er-On Data Transm ission M ode.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 161 of 221 Revision A (Sep 2007) *AUTO422 RS-422 Po w er-On Data Transm ission M ode.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 162 of 221 Revision A (Sep 2007) *AUTOUDP UDP Power-On Data Transmission Mode *AUTOU.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 163 of 221 Revision A (Sep 2007) *AUTOADDR UDP Po w er-On D ata Dest ination IP Address *AUTOADDR?<CR> Read Response Form at: *AUTOADDR=<N><CR> S e t *AUTOADDR=<XXX.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 164 of 221 Revision A (Sep 2007) Real-Time Data Timing W hen transm itting data at f ast upd ate rates , cons ideration mus t be given to t he a m ount of tim e that it tak es to trans m it a single m ess age.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 165 of 221 Revision A (Sep 2007) Communication Prot ocol: Command List @ RS-422 Baud.
LaserSpeed 8 000-3 Instru ction Handbook RS-232/R S-422 Communi cation Part No. 93463 / Drawing No. 0921-01561 Page 166 of 221 Revision A (Sep 2007) $H High Speed Pulse Output Co nfiguration L High Sp.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 167 of 221 Revision A (Sep 2007) Ethernet Com munication The LS8000-3 has an op tional Ethernet port that can be used t o collect data and configure settings.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 168 of 221 Revision A (Sep 2007) Netw ork Ma sk *IPNETMSK Read/ W r ite COM LED Function $C.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 169 of 221 Revision A (Sep 2007) Ping Example using DHCP An easy way to determine i f the LS8000-3 network connection is w ork ing is to send a ping.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 170 of 221 Revision A (Sep 2007) Telnet Example using DH CP An easy way to connect to the LS8000 over the netw or k is to use a telnet terminal.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 171 of 221 Revision A (Sep 2007) Configuring the IP Address with LaserTrak Configuring the .
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 172 of 221 Revision A (Sep 2007) Ping / ICMP The LS8000 will respond to Ping/ICMP messages. This is an easy way t o check the Ethernet connection, and can be done by any computer on the network.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 173 of 221 Revision A (Sep 2007) TCP Communications The LS8000-3 accepts TCP (Transfer Control Protocol) connections on port 23 (Telnet) and port 1002.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 174 of 221 Revision A (Sep 2007) UDP Command Example Sending a command to the LS8000-3 v ia.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 175 of 221 Revision A (Sep 2007) UDP Real-Time M easurem ent Example Starting real-tim e me.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 176 of 221 Revision A (Sep 2007) UDP Discovery Beacon The LS8000-3 supports a protocol that allow s a host to find all LaserSpeed gauges connected to a netw ork.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 177 of 221 Revision A (Sep 2007) Identifier Value Response Length (By tes) 0 Blank 0 – Th.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 178 of 221 Revision A (Sep 2007) UDP Discovery B eacon Example This example shows the transmission o f a Discovery Beacon, follow ed by responses from three different LS8000-3 gauges.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 179 of 221 Revision A (Sep 2007) This beacon message requests 10 v alues, identifiers 1 to 10.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 180 of 221 Revision A (Sep 2007) The highlighted section of the UDP message is show n above. T he first part of a beacon response (highlighted) indicates the protocol revision.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 181 of 221 Revision A (Sep 2007) Value 2 – Ethe rnet Hard ware ID Value 3 – DHCP En abl.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 182 of 221 Revision A (Sep 2007) Value 4 – Gauge Model Va lue 5 – Ser ial N umber.
LaserSpeed 8 000-3 Instru ction Handbook Ethernet Communication Part No. 93463 / Drawing No. 0921-01561 Page 183 of 221 Revision A (Sep 2007) Va lue 6 – Host N ame.
LaserSpeed 8 000-3 Instru ction Handbook Specifi cations Part No. 93463 / Drawing No. 0921-01561 Page 184 of 221 Revision A (Sep 2007) Specifications General Specifi cations Accuracy Depth of Field < 75 mm Depth of Field > 75 mm < ± 0.05% of reading < ± 0.
LaserSpeed 8 000-3 Instru ction Handbook Specifi cations Part No. 93463 / Drawing No. 0921-01561 Page 185 of 221 Revision A (Sep 2007) LS8000-3 Specifications Gauge Size -303, -303L, -306, -310 -315, -320 203 X 159 X 95.2 mm (8.0 X 6.25 X 3. 75 in.) 229 X 159 X 95.
LaserSpeed 8 000-3 Instru ction Handbook Specifi cations Part No. 93463 / Drawing No. 0921-01561 Page 186 of 221 Revision A (Sep 2007) LS8000-3E Specifications Gauge Size 362 X 229 X 154 mm (14.
LaserSpeed 8 000-3 Instru ction Handbook Specifi cations Part No. 93463 / Drawing No. 0921-01561 Page 187 of 221 Revision A (Sep 2007) LS8000-3X Specifications Gauge Size 508 X 327 X 186 mm (20 X 12.
LaserSpeed 8 000-3 Instru ction Handbook Specifi cations Part No. 93463 / Drawing No. 0921-01561 Page 188 of 221 Revision A (Sep 2007) LS8000-3 Features Fast Update Rate Confi gur able from 1ms to 2s Input Power 20-28VDC @ 2A (max ) RS-232 4800-230.4kBaud, w ith 7n2 or 8n1 framing RS-422 4800-230.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix A: LS8000-3 Dimensions & Installation Drawings Part No. 93463 / Drawing No. 0921-01561 Page 189 of 221 Revision A (Sep 2007) Appendix A: LS 8000-.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix A: LS8000-3 Dimensions & Installation Drawings Part No. 93463 / Drawing No. 0921-01561 Page 190 of 221 Revision A (Sep 2007).
LaserSpeed 8 000-3 Instru ction Handbook A ppendix A: LS8000-3 Dimensions & Installation Drawings Part No. 93463 / Drawing No. 0921-01561 Page 191 of 221 Revision A (Sep 2007) A ir Wipe / Quick Ch.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix B: LS8000E Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 192 of 221 Revision A (Sep 2007) Appendix B: LS 8000E.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix B: LS8000E Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 193 of 221 Revision A (Sep 2007).
LaserSpeed 8 000-3 Instru ction Handbook A ppendix B: LS8000E Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 194 of 221 Revision A (Sep 2007) MATERIAL RUNS INTO A.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix B: LS8000E Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 195 of 221 Revision A (Sep 2007).
LaserSpeed 8 000-3 Instru ction Handbook A ppendix B: LS8000E Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 196 of 221 Revision A (Sep 2007).
LaserSpeed 8 000-3 Instru ction Handbook A ppendix B: LS8000E Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 197 of 221 Revision A (Sep 2007) LS8000- E WITH AIR P.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix C: LS8000X Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 198 of 221 Revision A (Sep 2007) Appendix C: LS 8000X.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix C: LS8000X Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 199 of 221 Revision A (Sep 2007).
LaserSpeed 8 000-3 Instru ction Handbook A ppendix C: LS8000X Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 200 of 221 Revision A (Sep 2007).
LaserSpeed 8 000-3 Instru ction Handbook A ppendix C: LS8000X Dimensions & Installation D rawings Part No. 93463 / Drawing No. 0921-01561 Page 201 of 221 Revision A (Sep 2007).
LaserSpeed 8 000-3 Instru ction Handbook A ppendix D: Supply Voltage Requirements Part No. 93463 / Drawing No. 0921-01561 Page 202 of 221 Revision A (Sep 2007) Appendix D: Supply Vol tage Requirements The LS8000-3 gauge requires a supply voltage of 20 to 28 Volts DC at t he gauge .
LaserSpeed 8 000-3 Instru ction Handbook A ppendix D: Supply Voltage Requirements Part No. 93463 / Drawing No. 0921-01561 Page 203 of 221 Revision A (Sep 2007) In order to deliver at least 20 volts to the LS8000- 3, your power supply w ill need to be greater than 28.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix D: Supply Voltage Requirements Part No. 93463 / Drawing No. 0921-01561 Page 204 of 221 Revision A (Sep 2007) LaserSpeed Cables The following table contains the wire conduc tor sizes for various Be ta LaserMike cables.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 205 of 221 Revision A (Sep 2007) Appendix E : Troubleshooti ng Guide Communications Can't connect t o the g auge through th e RS-232 /RS-42 2 serial port.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 206 of 221 Revision A (Sep 2007) If using R S-232 o ver a lo ng cable, the baud rat e m ay too high. Switch to R S-422 for comm unications.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 207 of 221 Revision A (Sep 2007) serial ports 2. If us ing Laser Trak 3.x you start Las erTr ak 2. W hen LaserT rak s tarts, under the Tools menu, clic k Program Settings 3.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 208 of 221 Revision A (Sep 2007) few comm ands to lock into the ne w baud rate. W hen using a term inal progr am, all the dat a from the gauge prints on the sam e lin e.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 209 of 221 Revision A (Sep 2007) comm unications. much better noise imm unity than RS-232. USB to RS- 422 con verters are comm erciall y available.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 210 of 221 Revision A (Sep 2007) Enviro nm ental Conditi ons (i.e. roll c oolant, or coo lant mis t, spray and fum e) are adversel y aff ecting the meas urement.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 211 of 221 Revision A (Sep 2007) Enviro nm ental Conditi ons (i.e. roll c oolant, or coo lant mis t, spray and fum e) are adversel y aff ecting the meas urement.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 212 of 221 Revision A (Sep 2007) moving IN and O UT of the meas urement r egion.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 213 of 221 Revision A (Sep 2007) never get valid re adings. inc orrect ly config ured. m easurem ents if the s peed goes o utsid e this ran ge.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 214 of 221 Revision A (Sep 2007) Poor Qu alit y Factor, or won't m easure on t winner lin e Too c lose to twin ner Mov e gauge f arther f rom twinner to a location where the wires aren't spinning .
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 215 of 221 Revision A (Sep 2007) Gauge m isalignm ent 2. If using transm iss ive sensor s, verif y that the tra nsm itter is po inted d irectl y at the recei ver.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 216 of 221 Revision A (Sep 2007) Material Pr esent s ensiti vity not adjus ted correc tly The Materi al Pres ent thres hold m ust be properl y adjusted s o that th e gauge ca n determ ine whether or not materia l is present.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 217 of 221 Revision A (Sep 2007) Pulses lo ok funny on an oscill oscope.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 218 of 221 Revision A (Sep 2007) Shutter O pen Material Pres ent System Read y connecte d to User G round (Pin 11,19,21) f or the las er to tu rn on.
LaserSpeed 8 000-3 Instru ction Handbook A ppendix E: Troubleshooting Guide Part No. 93463 / Drawing No. 0921-01561 Page 219 of 221 Revision A (Sep 2007) Ethernet opt ion. W iring Configura tion comm and to see if the gau ge suppor ts Ethernet. If disab led, cont act your Beta LaserMik e sales r epres entative t o order the option.
LaserSpeed 8 000-3 Instru ction Handbook Index Part No. 93463 / Drawing No. 0921-01561 Page 220 of 221 Revision A (Sep 2007) Index +24V DC Po wer Input (Pins 24-25) , 55 Air W ipe, 18 Air W ipe/Q uick.
LaserSpeed 8 000-3 Instru ction Handbook Index Part No. 93463 / Drawing No. 0921-01561 Page 221 of 221 Revision A (Sep 2007) Monitor D isplay, 11 7 Output Config uration Para m eters, 110 Standard O p.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Laser LS8000-3 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Laser LS8000-3 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Laser LS8000-3 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Laser LS8000-3 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Laser LS8000-3, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Laser LS8000-3.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Laser LS8000-3. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Laser LS8000-3 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
