Manuale d’uso / di manutenzione del prodotto KI-G100 del fabbricante Kyocera
Vai alla pagina of 43
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 KI-G100 <Main Kit> IRIDIUM Ready GSM Handset User Guide.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Safety Precautions The following are regulatio ns and instructions con cerning the safety of the phone user and of third pa rties. Please read these points carefully before using the phone.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Table of Contents Safety Precautions ............................................................................. fron t cover Introducti on .......................................
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 4. Me nus ............................................................................................................. 12 How to use th e menus ....................................
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Introduction Welcome! Congratulations on choosing the Kyoce ra KI-G100 GSM phone for use on the GSM and IRIDIUM service s.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 1. Getting Started INSERT YOUR SIM CARD The GSM SIM (Subscri ber Identification Module) Card contains all the rel evant information concerning your subscription (card numbe r, phone number.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 CHARGE YOUR BATTER Y Before using your phone for the first time or afte r a long period without use, it i s important to charge the battery for at least 24 hours.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 YOUR KI-G100 PHONE The keypad and the display are your way of comm unicating with your KI-G100 phone. They light up wh en you turn the phone on o r press any key. The backlighting goes off automatically after 10 seconds, to conserve battery life.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Display description 1 Battery charge level: Fully charged Empty Charging 2 Roaming (receiving service on anoth er network than you.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 2. Your First Call PULL UP THE ANTENNA Your KI-G100 phone is e quipped with an extenda ble antenna. It is normall y possible to make or re ceive calls with the antenna in, but b etter quality is obtained with the antenna extended.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 TO ADJUST THE VOLUME During a conversatio n, the volume can be adjusted with the Rocker Key (+ - ). After the call the volume returns to its original setting (set in the Menu option “14 Ear Volume”).
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 3. Extra Dialling Services ABBREVIATED DIALLING There are different ways to recall and dial a phon e number from the Phonebook: Speed retrieval • In standby mode, scroll with ( 5 6 ) to the desired number in the Phonebo ok.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 CALLER LOG Your KI-G100 is equipped with a caller log for identified calls (with tele phone number if Calling Line Identification is available ) that have been received. To recall this caller log, press ( Mem ) and .
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 CALL WAITING, CALL HOLD AND M ULTIPARTY CALLS The GSM services “Call Waiting” and “Call Hold” allow you to put an active call on hold to be able to answer a waiting call or initiate a ne w call.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 To swap between active and held call(s) • Press ( Menu ) to access the In-Call Menu • Select with ( 5 6 ): Retrieve Sw ap if t.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 4. Menus Please read this introduction to get the most out of the menu s and their features. - Your KI-G100 features 2 principal m e nus: the Main Menu and the Memory Menu. - The menu structures are illustrated at the end of this introduction.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 A. Access the menu option by scrolling • Press (Menu) to access the Main Menu • Scroll with ( 5 6 ) to option “3 Costs” .
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 MAIN MENU STRUCT URE (continued on next page) Menus 14.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 (from previous page) Note: Menu “8 IRIDIUM” is only available when the KI-G100 is docked on the Iridium Adapter SD-66K (option.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 MAIN MENU 1 SETTINGS This menu allows you to choose particul ar settings for your phone.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 21 Text 1 Read new read all unread message(s) that have been received: • Scroll in the message with ( 5 6 ) • Press ( Menu ) t.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 received from the net work 3 COSTS An indication of the cost of a call and its duration can be display ed during the call itself or after it. You can also see a n indication of the cu mulative cost of all calls and their total duration since the la st reset.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 4 SERVICES 41 Barring This service must be included in your subscription pa ckage to be acce ssible. Your Service Provider will then give you a Barring Password to set a nd clear barrings.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 • Confirm, enter a new or edit the current destination number, and confirm • Eventually, select a duration for “Divert on No.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 6 SECURITY Here you can lock the keypad, e nable or disable the SIM Card’s PIN che ck, change its PIN code, change its PI N2 code, enable or disable the Fixed Dialling Memory (FDN) function.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 You can change here the PIN2 cod e of your SIM Card. It must contain a minimum of 4 and a maximum of 8 digits.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 8 IRIDIUM This menu allows you to perform the settings relat ed to the IRIDIUM satellite operation. It is only shown when the IR IDIUM Adapter (a ccessory) is attached. Please refer to the section “5.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 MEMORY MENU 1 PHONEBOOK Your Phonebook consi sts in 3 different memories for storin g phone numbers: • SIM Card Memory: memory l.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 12 New create an ent ry in the Phonebook (SIM, Phone or FD N Memory according to the location number) • Enter a name - To enter .
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 2 DIALLED This function allows you to display the 10 last diall ed numbers. These are either stored on the SIM Card (if the SIM supports this funct ion) or in the phone. If you dial the same number more than one time, this num ber will appear only once i n the list.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 5. IRIDIUM By attaching the Kyocera IRIDIUM Adapte r S D-66K (acces sory) to y our KI-G100 phone, you transform it into an IRID IUM compatible han dset capable of communicating directly with t he IRIDIUM satellite network.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Each IRIDIUM satellite is communicating with the next one, so that a call i s routed within the constellation before it goes down to earth via a terre strial gateway. A single IRIDIUM satellite footprin t has a di ameter of approx.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 6. Problem Solving / Helpful Hints IN CASE OF A PROBLEM Before contacting the Kyocera Help line, please observe the followi ng. If the display shows “PIN is blocked”: The PIN code has been entered incorrectly three times, you ne ed the PUK (PIN Unlocking Key) to release it.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 MAINTENANCE The equipment i.e. phone and charg er do require some care. Pl ease observe the following: • Store it in a clean, dust-free spac e. Its moving parts can be damaged by dust.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 TECHNICAL DATA KI-G100 (main unit) Max. output power: 2 Watt Power supply: DC 3.6 V - 600 mAh Li-Ion battery Standby time GSM*: Talk time GSM*: approx. 70 hours approx. 120 minutes Standby time IRIDIUM*: Talk time IRIDIUM*: approx.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 7. Accessories The following Kyocera o riginal accessorie s have been designe d especially to work with your KI-G100 ph one. Additional accessories may b e available and are sold separately.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Soft Case GC (Ref. SG-G100) External Antenna GC (Ref. OA-G100) Personal Hands Free GC (Ref.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 IRIDIUM ACCESSORIES IRIDIUM Adapter (Ref. SD-66K)) IRIDIUM Hands Free Kit (Ref. HF-S100) IRIDIUM AC Charger (Ref. AC-S100) IRIDIUM Car Holder (Ref. CH-S100) IRIDIUM DC Charger (Ref.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 IRIDIUM Solar Power Supply (Ref. SP-S100) Personal Hands Free GC (Ref. EM-G100) Data Cable GC (Ref.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Index (to be inserted in the final version) Index 36.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Notes:.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Emergency Call TO MAKE AN EMERGENCY CALL: • Press and hold to switch on the phone • If required, enter the SIM Card’s PIN co.
Kyocera KI-G100 GSM Handset - Ver. 0.3 Preliminary Ver sion - 01.1999 Short User Guide (credit card si ze, printed on both sides) Side 1: Short User Guide KI-G100 To switch on: press and hold until a message appears. If required, enter the SIM Card’s PIN and confirm with ( OK ).
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kyocera KI-G100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kyocera KI-G100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kyocera KI-G100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kyocera KI-G100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kyocera KI-G100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kyocera KI-G100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kyocera KI-G100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kyocera KI-G100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
