Manuale d’uso / di manutenzione del prodotto KPS 25s del fabbricante Krell Industries
Vai alla pagina of 19
The Leader in Engineering KPS 25s Krell Playback System TM Instructions for Use Owner’s Reference.
KPS 25s Krell Playback System TM CONTENTS Krell®lndustries, Inc. 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954 FAX 203-799-9796 E-MAIL krell@krellonline.
CE Marking Unpacking This product complies with the EMC direc- 1. Open the shipping box and remove the tire (89/336/EEC) and the low-voltage top layer of foam. You will see these items: directive (73/23/EEC). Introduction Thank you for your purchase of the Krell KPS 25s Krell Playback System TM.
Placement WARNINGS The Krell Playback System TM must not be located where it could be exposed to drip- ping or splashing fluids. Before you install the KPS 25s into your system, review the following guidelines to choose the location for the KPS 25s. This will facilitate a clean, trouble-free installation.
NOTE: Attach the Acrylic Cover before con- necting the flex-foil cable. Carefully remove the Acrylic Cover from the velvet pouch and place it on a soft surface.
INSTALLING THE ACRYLIC COVER ONTO THE KPS 25s, continued = Acrylic Cover, Right View, Perpendicular to the KPS 25s ACRYLIC COVER 3. With the Acrylic Cover perpen- dicular to the KPS 25s, line up the pins in the Acrylic Cover (B) with the notches in the top of the KPS 25s (C).
INSTALLING THE A(;RYLIC COVER ONTO THE KPS 25s continued PUBH-PULL P’N ~ ( ) The "lop o] the KPS 25s with Acrylic Cover and Flex-Foil Cable in Piece A PUSH-PULL PIN B PIN IN ACRYLIC COVER C NOTCH IN TOP COVER D FLEX-FOIL CABLE E FLEX-FOIL RECEPTACLE 5.
Connecting the KPS 25s to Your System WARNING When making connections to this compo- nent or any other, make sure the power amplifier is Off. Make sure all cable termi- nations are of the highest quality, free from frayed ends, shorts, or cold solder joints.
The KPS 25s is equipped with the following analog and digital inputs: 1 set of balanced analog inputs (via an XLR connector) 3 sets of single-ended analog inputs (via RCA connectors) 1 set of tape mon.
SECTION 1 SECTION 2 SECTION 3 SECTION 4 KPS 25s DIRECT AGCESS CONTROLLER SECTION 7 SECTION 6 SECTION 5 2 SPDIF co-axial digital outputs (via The XLR pin RCA connectors) below: 1 AES/EBU digital output (via an XLR Pin 1 connector) Pin 2 KrelP recommends the use of balanced Pin 3 interconnects.
Using the fixed outputs in this configuration may cause damage to associated power amplifier and loudspeakers. Additional Connections RC-5 The RC-5 input makes custom installation easy and secure by accepting baseband RC-5 input commands from hardwired remote controllers.
II Section 2 Special Play Functions Repeat Press once to repeat the entire disc or track program continuously. Press twice to repeat the current track continuously. Press a third time to cancel this function. When selecting the desired Repeat function, press the Repeat button once and REPEAT will appear in the Compact Disc Transport Display Window.
Play To activate playback from the beginning of the CD, press the Play button after inserting the CD onto the transport. Clamp the CD down, and close the Acrylic Cover. Playback will begin from the first track. If the CD is loaded and the disc contents have been scanned, press Play on the front panel or remote control.
Section7 Drive Off Turns the CD transport On/off. Amplifier and Display I/Vindow Functions Power The main power switch that turns the KPS NOTE: Use the Amplifier Power and Amplifier Display buttons to access a Krell ® 25s On/off. amplifier connected to your system.
Menu Functions 4. Turn the Level Control Knob to select the input to which you want to assign a custom name. All initial set u p and subsequent system con- figuration adjustments may be made using either the Tabletop Remote Controller, or the front panel controls.
To change the shutter operation mode: 1. Press the Menu button. The word MENU will appear. 2. Turn the Level Control Knob until the word SHUTTER appears. 4. Turn the Level Control Knob to select . the input for volume trim. 5. Press the Menu button again.
Warranty THERE ARE NO USER-SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT. The KPS 25s KrelP Playback System has a limited and transferable warranty of five years for parts and labor and three years on transport related parts.
Return Authorization dealer, distributor, or the KrelP Service Procedu re Department for assistance. Krell ® is not responsible for any damage IMPORTAN~ Ifyou believe there is a prob- incurred in transit.
KrelP Industries, Inc. 45 Connair Road Orange, CT 06477-3650 USA TEL 203-799-9954, FAX 203-799-9796 E-MAIL krell@krellonline.com www.krellonline.com KPS 25s Krell Playback System TM Specifications FREQUENCY RESPONSE 0.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Krell Industries KPS 25s è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Krell Industries KPS 25s - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Krell Industries KPS 25s imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Krell Industries KPS 25s ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Krell Industries KPS 25s, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Krell Industries KPS 25s.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Krell Industries KPS 25s. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Krell Industries KPS 25s insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
