Manuale d’uso / di manutenzione del prodotto KR.XN del fabbricante Kraun
Vai alla pagina of 29
www .kraun.it Wireless Router 54MB 4 Ports User’s Manual Cod. KR.XN.
www .kraun.it 2 User’s Manual Contents Package contents 4 1. About this Guide 4 1.1 Purposes 4 1.2 Conventions 4 1.3 Overview of this User Guide 4 2. Introduction 4 2.1 Overview of the Router 4 2.2 Features 4 2.2.1 The Front Panel 5 2.2.2 The Rear Panel 5 3.
www .kraun.it 3 User’s Manual 5.8.3 Domain Filtering 20 5.8.4 MAC Filtering 20 5.8.5 Remote Management 21 5.8.6 Advanced Security 21 5.9 Static Routing 22 5.10 DDNS 22 5.11 System Tools 22 5.11.1 Time 22 5.11.2 Firmware 23 5.11.3 Factory Defaults 23 5.
www .kraun.it 4 User’s Manual Package contents The following contents should be found in your box: • One KR.XN Wireless Router 54MB 4 Ports • One AC power Adapter for KR.XN Wireless Router 54MB 4 Ports • Quick Installation Guide • One Resource CD for KR.
www .kraun.it 5 User’s Manual 2.2.1 The Front Panel The front panel of the KR.XN consists of several LED indicators, which is designed to indicate connections.
www .kraun.it 6 User’s Manual 4. Quick Installation Guide After connecting the KR.XN Router into your network, you should con- figure it. This chapter describes how to configure the basic functions of your KR.XN Wireless Router 54MB 4 Ports. These procedures only take you a few minutes.
www .kraun.it 7 User’s Manual router using the web browser. Please click the Quick Setup link on the left of the main menu and the Quick Setup screen will appear. Figure 4-5 Quick Setup Click Next, then Choose WAN Connection Type page will appear, shown in figure 4-6.
www .kraun.it 8 User’s Manual These settings are only for basic wireless parameters, for advanced set- tings, please refer to Section 5.5: “Wireless.” Note: The change of wireless settings won’t take effect until the router reboots! You can reboot it manually.
www .kraun.it 9 User’s Manual • MAC Address - The physical address of the router, as seen from the LAN. The value can’t be changed. • IP Address - Enter the IP address of your router in dotted-decimal notation (factory default: 192.168.1.1). • Subnet Mask - An address code that determines the size of the net- work.
www .kraun.it 10 User’s Manual • User Name/Password - Enter the User Name and Password pro- vided by your ISP. These fields are case-sensitive. • Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time).
www .kraun.it 11 User’s Manual Figure 5-9 802.1X + Static IP Settings • User Name - Enter the user name for 802.1X authentication pro- vided by your ISP • Password - Enter the password for 802.1X authentication pro- vided by your ISP. Click Login to start 802.
www .kraun.it 12 User’s Manual Figure 5-11 L2TP Settings • User Name/Password - Enter the User Name and Password pro- vided by your ISP. These fields are case-sensitive.
www .kraun.it 13 User’s Manual Figure 5-13 MAC Address Clone Some ISPs require that you register the MAC Address of your adapter, which is connected to your cable, DSL modem or Ethernet during instal- lation.
www .kraun.it 14 User’s Manual you choose this option to encrypt your wireless network. The encryp- tion settings are described below. • Authentication Type - You can select one of the following authentica- tion types: • WEP - Select WEP authentication type based on 802.
www .kraun.it 15 User’s Manual Figure 5-17 Add or Modify Wireless MAC Address Filtering entry To add or modify a MAC Address Filtering entry, follow these instruc- tions: 1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexa- decimal digit).
www .kraun.it 16 User’s Manual There are three submenus under the DHCP menu (shown in figure 5- 19): DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below.
www .kraun.it 17 User’s Manual 5.7 Forwarding Figure 5-24 The Forwarding menu There are four submenus under the Forwarding menu (shown in figure 5-24): Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function.
www .kraun.it 18 User’s Manual 3. Select the protocol used for Trigger Port from the pull-down list, ei- ther TCP, UDP, or All. 4. Enter the range of port numbers used by the remote system when it responds to the PC’s request. 5. Select the protocol used for Incoming Ports Range from the pull- down list, either TCP or UDP, or All.
www .kraun.it 19 User’s Manual and MAC Filtering are enabled, their settings are ineffective. Figure 5-32 Firewall Settings • Enable Firewall - the general firewall switch is on or off. • Enable IP Address Filtering - set IP Address Filtering is enabled or disabled.
www .kraun.it 20 User’s Manual For example: If you desire to block E-mail received and sent by the IP Address 192.168.1.7 on your local network, and to make the PC with IP Address 192.168.1.8 unable to visit the website of IP Address 202.96.134.12, while other PCs have no limit you should specify the fol- lowing IP address filtering list: 5.
www .kraun.it 21 User’s Manual 3. Status - Select Enabled or Disabled for this entry on the Status pull- down list. 4. Click the Save button to save this entry. To add additional entries, repeat steps 1-4. When finished, click the Return button to return to the MAC Address Fil- tering page.
www .kraun.it 22 User’s Manual • Forbid Ping Packet from LAN Port - Enable or Disable forbidding Ping Packet to access the router from the LAN port. The default value is disabled. If enabled, the ping packet from the LAN port cannot ac- cess the router.
www .kraun.it 23 User’s Manual 2. Enter date and time in the right blanks 3. Click Save. Click the Get GMT button to get GMT time from Internet if you have con- nected to Internet. If you’re using Daylight saving time, please follow the steps below.
www .kraun.it 24 User’s Manual • Upgrade the firmware of the router (system will reboot automati- cally). • Restore the router’s settings to factory default (system will reboot au- tomatically). 5.11.6 Password This page (shown in figure 5-53) allows you to change the factory de- fault user name and password of the router.
www .kraun.it 25 User’s Manual 2) Connect the Ethernet cable from your ADSL modem to the WAN port on the router. The telephone cord plugs into the Line port of the ADSL modem. 3) Login to the router, click the “Network” menu on the left of your browser, and click “WAN” submenu.
www .kraun.it 26 User’s Manual 4. I want to build a WEB Server on the LAN, what should I do? 1) Because the WEB Server port 80 will interfere with the WEB man- agement port 80 on the router, you must change the WEB man- agement port number to avoid interference.
www .kraun.it 27 User’s Manual Figure B-3 Configuration tab 3) Click on Properties. The following TCP/IP Properties window will display and the IP Address tab is open on this window by default. 4) Now you have two ways to configure the TCP/IP protocol below: -> Assigned by DHCP Sever a.
www .kraun.it 28 User’s Manual Figure B-7 IP Address tab b. Type the router’s LAN IP address (the default IP is 192.168.1.1) into the New gateway field on the Gateway tab, and click on the Add button, as shown in the figure: Figure B-8 Gateway tab c.
www .kraun.it 29 User’s Manual Appendix D: Glossary • 2x to 3x eXtended Range™ WLAN Transmission Technology - The WLAN device with 2x to 3x eXtended Range™ WLAN transmission technology make its sensitivity up to 105 dB, which gives users the ability to have robust, longer-range wireless connections.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kraun KR.XN è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kraun KR.XN - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kraun KR.XN imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kraun KR.XN ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kraun KR.XN, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kraun KR.XN.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kraun KR.XN. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kraun KR.XN insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
