Manuale d’uso / di manutenzione del prodotto EA-1 del fabbricante Korg
Vai alla pagina of 52
Thank you purchasing the Korg ELECTRIBE·A EA-1. In order to enjoy long and trouble-free use, please read this manual carefully and use the instrument correctly .
2 T o ensure long, trouble-free operation, please read this manual carefully . Precautions Location Using the unit in the following locations can result in a malfunction.
3 Contents 1. Introduction ................................................................... 6 Main features ......................................................................................... 6 About the data you create on the EA-1 ..........
4 Playing a pattern (Pattern Play) ........................................................... 22 The timing at which patterns will change ............................................................ 22 Playing from the beginning of a pattern (Reset & Play) .
5 Specifying the pitch of each pattern .................................................................... 36 Editing a song ..................................................................................................... 36 Inserting a pattern at a specified position (Insert Pattern) .
6 1.Introduction 1. Introduction Thank you for purchasing the Electribe·A EA-1 . The Electribe·A EA-1 is a unique and easy-to-use synthesizer that uses DSP synthesis technology to help anyone from beginners to har d-core users to pr oduce truly original sounds and phrases.
7 1.Introduction 1.Introduction Make connections and play! Example connections Power switch or Adapter cable holder AC Local V oltage Preparing to play Be sure to turn off the power before making connections. Careless operation may damage your speaker system or cause malfunctions.
8 2.Front and rear panel 2. Front and rear panel The controls and other parts of the EA-1 can be broadly gr ouped as shown in the diagram. Common section 1. MASTER VOLUME This knob adjusts the volume that is output from the Part output jacks and the head- phone jack.
9 2.Front and rear panel 2.Front and rear panel Synthesizer section 1. OSCILLA TOR This produces the basic waveform. • Portamento This smoothly connects changes in pitch. • OSC Balance (oscillator balance) Adjust the level balance of the two oscilla- tors.
10 2.Front and rear panel Sequence Control section 1. Rec key Use this key to recor d phrases and movements of the knobs etc. If you press this key during r ecording, recor d- ing will end, and playback will continue. 2. Stop/Cancel key This key stops playback of a pattern or song, or cancels an operation.
11 2.Front and rear panel 2.Front and rear panel 5. Shift key This key is used in conjunction with other keys. When held down, it gives an additional function to another key . Shift + Play/Pause key :Playback fr om the beginning of the pattern. Shift + Rec key :During playback, erase triggers from the pattern.
3. Basic operation (Quick Start) 12 3. Basic operation (Quick Start) Conceptual diagram of the EA-1 On the EA-1 , a song consists mainly of Patterns (which consist of Parts and delay set- tings) and event data (refer to p.37 "Recor ding knob movements or your performance in a song (Event Recording)").
3. Basic operation (Quick Start) 3. Basic operation (Quick Start) 13 Listening to Patterns 1. Press the Pattern mode key to enter Pattern mode (the key will light). 2. Use the cursor [ ▲ ][ ▼ ] keys to make the parameter select LEDs indicate Pattern (top).
3. Basic operation (Quick Start) 14 Striking keys to play sounds (Keyboard function) 1. T urn on the Keyboar d function key (the key will light). 2. Use the step keys as a keyboard. 3. Y ou can use the Part Select key to switch the part that you play .
3. Basic operation (Quick Start) 3. Basic operation (Quick Start) 15 Playing the sound of a part along with a song or pattern 1. T urn on the Keyboard function key , and press the step keys to play the sound. 2. In Song mode or Pattern mode, press the Play/Pause key to begin playback.
3. Basic operation (Quick Start) 16 In the following pages we will explain how to perform Realtime Recording and Step Recording. For details on Event Editing, r efer to Event Editing (p.
3. Basic operation (Quick Start) 3. Basic operation (Quick Start) 17 6. Pr ess the Rec key to enter recording mode. At this time, press- ing the PLA Y key will not start playback. 7. Use the step keys to input the pitch for each note of the phrase. (The target step will automatically advance by one step each time you do so.
3. Basic operation (Quick Start) 18 Using a Motion Sequence What is a Motion Sequence? For each part, you can record the changes you make to the synth parameters using the knobs, and loop them for playback. The looped data for the knob movements is called a Motion Sequence (refer to p.
3. Basic operation (Quick Start) 3. Basic operation (Quick Start) 19 Connecting various sources to the audio input Let's try connecting various types of audio device (radio, or MD or CD player) or tone generator to the audio input jack. T ry out various types of sounds or music.
3. Basic operation (Quick Start) 20 Playing with Pattern Set What is Pattern Set? Pattern Set is a function that lets you register a favorite pattern to each of the sixteen step keys, and use the step keys to switch patterns. Y ou can use this function to play a performance simply by selecting patterns one after the other .
3. Basic operation (Quick Start) 3. Basic operation (Quick Start) 21 Synchronized playback with the ER-1 By synchronizing the Electribe EA-1 and ER-1 you can enjoy even greater performance possibilities. Her e's how you can make the ER-1 playback in synchronization with the tempo of the EA-1 .
4.Pattern mode 22 4. Pattern mode In this mode you can play patterns, or edit them to make new patterns. Press the Pattern mode key to enter Pattern mode.
4.Pattern mode 4.Pattern mode 23 Selecting a pattern Y ou can use the Part Select key to switch the part that will be edited or played using the Keyboard function. When you select a Part, the LED for that part will light, and you can edit it in the Synthesizer section, or edit a phrase pattern.
4.Pattern mode 24 OSC2 Pitch Ofs (OSC2 pitch offset) – 1 octave ... 4 octaves Specify the pitch of OSC2 relative to the pitch of OSC1 . The pitch of OSC2 can be adjusted in the range of – 1 octave to 4 octaves from the pitch of OSC1 .
4.Pattern mode 4.Pattern mode 25 Resonance 0...100 This parameter adds character to the sound by boosting the region ar ound the cutoff fr equency . If you raise the r eso- nance and turn the Cutoff knob (or adjust EG Int and De- cay ), you will hear the typical "meow-ing" sound typical of analog synthesizers.
4.Pattern mode 26 Length, Scale/Beat settings Y ou can set the length (the length of the entire pattern) and the basic beat (time signature).The Length and Scale/Beat you specify here will af fect the correspondence between step keys and note values, and the maximum number of steps as shown in the following diagram.
4.Pattern mode 4.Pattern mode 27 Creating a phrase pattern There ar e three ways to create a phrase pattern. Realtime recording Use the Keyboard function to play the step keys at the exact timing you wish to recor d them. Step recording Use the Keyboard function to specify the pitch of the note for each target step to cr eate the phrase.
4.Pattern mode 28 Changing the pitch Pitch C-1...G9 1. T urn off the Keyboar d function key (the key will go dark). 2. Use the cursor keys to make the parameter select LEDs indi- cate Pitch . 3. Use the Part select key to select the part that you wish to edit.
4.Pattern mode 4.Pattern mode 29 Motion sequence Playing a motion sequence A motion sequence can be played back in one of the following two ways, and you can select the playback method indepen- dently for each part. Smooth : Knob values will be connected smoothly , and the sound will change smoothly .
4.Pattern mode 30 Transposing a phrase (Transpose) T ranspose – 24...24 This operation lets you transpose a phrase. 1. While you continue pressing the T ranspose key , the display will indicate the current transposition status. 2. While holding down the T ranspose key , rotate the dial to trans- pose the phrase in semitone steps.
4.Pattern mode 4.Pattern mode 31 3 5 4 2,6 2 Copying a part (Copy Part) Y ou can copy the sound settings and phrase pattern data (in- cluding motion sequence) from a selected part to another part. 1. If the pattern is playing, press the Stop/Cancel key to stop playback.
4.Pattern mode 32 Pattern Set Pattern Set is a function that lets you assign your favorite pat- terns to each of the sixteen step keys, and switch them at the touch of a key .
4.Pattern mode 4.Pattern mode 33 Saving a pattern (Write) If you wish to keep the pattern data that you create, you must perform this W rite operation. When you perform the W rite op- eration, "Data Copy within a pattern" (p.31) will occur auto- matically , depending on the pattern length.
5.Song mode 34 5. Song mode A song consists of patterns arranged in the desired order of play- back. Y ou can create and save up to sixteen songs in the internal memory of the EA-1 . In addition to pattern playback, songs can also recor d phrases and knob movements.
5.Song mode 5.Song mode 35 Creating a song Creating a song from scratch Here's how to create a song by placing patterns in the desir ed order . If you s witch to a diff erent song while editing a song, your edited data will be lost. If you wish to keep the edited song, you m ust perform the Write operation to save the song data.
5.Song mode 36 Specifying the pitch of each pattern Pitch Offset – 24...24 This function offsets the pitch of the pattern at the specified position within the song. Pitch Offset simply offsets the pitch within the song. It does not affect the pitch data of the pattern itself .
5.Song mode 5.Song mode 37 Deleting a pattern from a specified position (Delete Pattern) Y ou can delete a pattern from a specified position, and subse- quent patterns will be moved forward (toward the beginning of the song).
5.Song mode 38 Recording knob movements or your performance in a song (Event Recording) In addition to placing patterns in a desired playback or der , Song mode also lets you recor d your realtime performance on the step keys using the Keyboard function, and knob movements you perform.
6.Global mode 6.Global mode 39 6. Global mode In Global mode you can set parameters such as Metronome or Protect. Press the Global mode key to enter Global mode. T o execute Global mode, press a dif ferent mode key . The settings you make in Global mode will be cancelled if you turn off the power without Wr iting.
6.Global mode 40 Synchronizing an external MIDI device to the EA-1 as master (int) 1. Use a MIDI cable to connect the MIDI OUT connector of the EA-1 to the MIDI IN connector of the external MIDI device (sequencer or synthesizer etc.). 2. Use the cursor keys to make the parameter select LEDs indi- cate Clock .
7.MIDI mode 7.MIDI mode 41 7. MIDI mode In MIDI mode you can make MIDI-related settings, and dump exclusive data. T o enter MIDI mode, press the MIDI mode key . T o leave MIDI mode, press a dif ferent mode key . If you turn off the power without Wr iting, the settings you made in MIDI mode will be lost.
7.MIDI mode 42 MIDI filter settings Here you can select the types of MIDI message that will be trans- mitted and received. For each character " PCE " in the display , select " O " .
8.Data 8.Data 43 8. Appendices About MIDI 1. MIDI channels Similarly to a television, data can be received when the channel of the receiving device matches the channel on which the data is being transmitted. The transmit/receive channel of the EA-1 is set by the MIDI channel setting in MIDI mode.
8.Data 44 the same location. When the Start/Pause key is pressed on the master device, a Continue message is transmitted, and the song will begin playback from the curr ently selected position.
8.Data 8.Data 45 Error messages Data could not be written. When writing a song to a different song num- ber , the maximum number of recordable events was exceeded. Use the Clear Event operation to erase unwanted events from the song. Protect was turned " on " for the memory into which you attempted to write data.
8.Data 46 Example sounds Saw Bass Detuned Saw Sync Lead 5th Pad Sub Bass Distortion Lead/Bass Ring Mod Deep Flange Octave Bass Pulse Width Mod Decimator Beam.
8.Data 8.Data 47 Blank Chart When you have created a sound that you like, you can stor e the knob and key locations in this page..
8.Data 48 Index A AMP Distortion ------------------ 9, 25 Level ------------------------ 9, 25 Audio In ----------------- 8, 19, 39 A UDIO IN THR U ------ 8, 19, 39 B Beat --------------------------- .
8.Data 8.Data 49 Pitch Offset --------------------- 36 Pitch Shift ----------------------- 30 Play Motion Sequence ------ 18, 29 Pattern ------------------- 13, 22 Pattern set -------------- 20, 32 So.
8.Data 50 Pattern Name List A Bank No. Pattern Name Style Te m p o A01 Goa T r ance 1 T echno 135 A02 Goa T r ance 2 T echno 135 A03 Enter the T r ibesmen T echno 125 A04 Analog Seq T echno 130 A05 Filter Sweep & A.
51 T ransmitted Recognized Remarks Function ... [Synthesizer] ELECTRIBE A · EA-1 MIDI Implementation Chart Mode 1: OMNI ON, POL Y Mode 2: OMNI ON, MONO O : Y es Mode 3: OMNI OFF , POL Y Mode 4: OMNI .
NO TICE K ORG products are manufactured under strict specif ications and voltages required by each country . These products are warranted by the K ORG distributor only in each country .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Korg EA-1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Korg EA-1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Korg EA-1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Korg EA-1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Korg EA-1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Korg EA-1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Korg EA-1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Korg EA-1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
